SEARCH · Search PubMed

Results for “Surface-enhanced Raman scattering”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

368 recordsLinked to original sources

PubMed2026

A point-of-use SERS assay for rapid detecting difenoconazole and flusilazole residues in fruit juices using Au/COF substrate.

We developed a ready-to-use surface-enhanced Raman scattering (SERS) sensor for rapid, pretreatment-free detection of difenoconazole (DIF) and flusilazole (FLU) in peach and lychee juices. The substrate combines Au nanoparticles (AuNPs) with covalent organic frameworks (COF) and is implemented on a portable 25-well plate, enabling in situ testing. Juices can be directly applied to the SERS-active Au/COF composite, allowing simultaneous adsorption and signal generation. The correlation between SERS intensity and logarithmic concentration yielded R-values between 0.925 and 0.986, meeting the monitoring needs of non-laboratory scenarios. The entire workflow completes within 12 min, offering a faster alternative to conventional methods while maintaining high sensitivity and reproducibility. Detection limits reach 0.96-1.22 ppb for DIF and FLU, both of which are below the regulatory maximum residue limits. Distinct SERS fingerprints enable reliable discrimination of mixed residues across juice matrices, supporting rapid on-site monitoring and cost-effective pesticide surveillance.

Triazoles↗

PubMed2026

A Meta-learning-driven strategy for adulteration detection in sweet potato starch and vermicelli using Raman spectroscopy.

To address the widespread adulteration of sweet potato starch and its vermicelli with cheaper starches and overcome conventional supervised learning's dependency on large labeled datasets, this study developed a few-shot discrimination method integrating Raman spectroscopy with meta-learning. We constructed a meta-learning framework using cassava- and wheat-adulterated sweet potato starch as the source domain for training, with potato-adulterated sweet potato starch and cassava-adulterated sweet potato vermicelli as two target domains for testing. Raman spectra showed high consistency between sweet potato vermicelli and its raw starch, laying the foundation for cross-domain detection. Testing yielded comprehensive classification accuracies of 95.33% and 98.00% for the two target domains, significantly outperforming SVM, RF, and CNN (max. 85.24%). This approach effectively identifies subtle starch variety differences in complex adulteration, providing novel food quality inspection solutions and verifying the feasibility of raw material-to-finished product cross-domain detection.

Ipomoea batatas↗

PubMed2026

Targeted Nanoparticle Delivery CRISPR/Cas9: overcoming biological barriers, enhancing stability, and improving therapeutic precision.

Clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9) has emerged as a promising gene-editing platform for genetic disorders; however, its in vivo application remains limited by low delivery efficiency and biological barriers. Many CRISPR payloads fail to reach target sites due to extracellular degradation, immune clearance, and intracellular trafficking limitations. This review examines the interplay between biological barriers and nanoparticle engineering strategies for CRISPR/Cas9 delivery. A barrier-oriented engineering approach is proposed as a central framework, encompassing ligand-based surface modification for enhanced targeting and uptake, improved circulation stability via PEGylation and biomimetic coatings, and optimized payload release through endosomal escape strategies. Stimulus-responsive nanoparticle systems further enable spatiotemporal control over payload release. Nuclear targeting strategies, including optimization of nuclear localization signals (NLS) and exploitation of endogenous trafficking pathways, are highlighted as key factors for improving genome-level editing efficiency. Despite these advances, major challenges-including limited intracellular delivery efficiency, insufficient targeting precision, and safety concerns-continue to hinder clinical translation. Future directions highlight artificial intelligence-driven nanoparticle design, personalized delivery systems, and next-generation CRISPR platforms. Overall, an integrated, barrier-oriented engineering strategy is essential for advancing CRISPR/Cas9 delivery toward clinical applications, ultimately advancing global good health and well-being.

CRISPR/Cas9↗

PubMed2026

Effectiveness of STK Spray® for semen stain localization on solid surfaces: A specificity and sensitivity study.

Semen identification is a crucial step in sexual assault cases. The aim of this study was to assess STK Spray®, a presumptive test for semen, under controlled conditions including, simulated crime scene stains detection. Easy to use, it can be sprayed directly onto different surfaces and visualized under UV light. Several tests were performed on five different substrates (ceramic tile, drywall, metal, wood, and faux leather). The spray was able to enhance semen fluorescence, especially in diluted samples, with characteristic "globular" spots. Although it showed good specificity, false positives could be obtained with 10% bleach. The fluorescence signals were quantified using ImageJ™ and showed a statistically significant substrate-dependent variability. Mixture analysis indicated that saliva did not interfere with detection of semen, while urine partially suppressed the signal and blood markedly affected its interpretation. Simulation tests with UV lamp comparisons confirmed the importance of choosing the right detection method and the utility of this presumptive test in combination with additional immunochromatographic tests. A preliminary signal retention test showed stable fluorescence for up to two years when stains were stored appropriately. Finally, complete DNA profiles (100% of alleles) were obtained from all samples (n = 24) after exposure to the reagent and UV light. Because of its ability to enhance semen signal, especially on specific surfaces, and its rapidity of use and detection, STK Spray® may represent a useful aid in the preliminary screening phase.

Humans↗

PubMed2026

Unconfined compressive strength prediction for the ordinary Portland cement-steel slag-silica fume ternary system based on response surface methodology.

This research was undertaken to address environmental concerns associated with industrial solid waste and to reduce cement consumption in geotechnical engineering. It specifically investigates the feasibility of using steel slag (SS) and silica fume (SF) as partial substitutes for ordinary Portland cement (OPC) in soil stabilization. The effects of SS, SF, OPC, and initial moisture content on the unconfined compressive strength (UCS) of stabilized soil were investigated through single-factor experiments and response surface methodology (RSM). The results show that SS and SF can synergistically enhance the strength of stabilized soil, although their interaction effect was not statistically significant within the investigated ranges. Compared with soil stabilized solely with OPC, the addition of 18 % SS and 10 % SF reduced OPC consumption by 3 % without compromising strength. Microstructural and compositional analyses further revealed that SS mainly supplied calcium- and silica-bearing components, while SF provided highly reactive silica and micro-filling effects, jointly promoting hydration reactions and improving the compactness of the stabilized soil matrix. As a result, more hydration products were formed in the OPC/SS/SF-stabilized soil than in the OPC-stabilized soil, which contributed to pore filling and strength enhancement. This study provides useful guidance for the sustainable utilization of industrial solid waste and the low-carbon development of soil stabilization materials.

Construction Materials↗

PubMed2026

Feasibility and barriers to same-day physical therapy following lumbar fusion surgery.

OBJECTIVE: To evaluate the feasibility of same-day (postoperative day 0; POD0) physical therapy (PT) following lumbar fusion and to identify factors associated with failure to participate. METHODS: This retrospective study analyzed prospectively collected data from patients undergoing single-level posterior spinal fusion (PSF), with or without anterior (ALIF) or lateral (LLIF) interbody fusion, between January and December 2024 at a single institution. A standardized POD0 PT protocol was implemented for eligible patients. Patients were categorized into two groups: successful POD0 PT (ambulatory on POD0) and unable to participate. Demographic and surgical variables were compared between groups. Reasons for inability to participate were recorded and categorized. RESULTS: Among 129 patients in whom POD0 PT was attempted, 84 (65%) successfully participated, while 45 (35%) were unable. There were no significant differences in age, sex, BMI, ASA class, operative time, estimated blood loss, or surgical approach between groups. Patients who successfully completed POD0 PT had a significantly shorter hospital length of stay compared to those who did not (3.4 ± 1.6 vs 5.8 ± 2.9 days, P < 0.001), with no differences in complication rates, discharge disposition, emergency department visits, or reoperation rates. The most common barriers to POD0 PT were postoperative pain, medical issues (e.g., orthostatic hypotension, nausea, dizziness), and anesthesia-related somnolence. Less common factors included postoperative restrictions and logistical issues such as brace availability. CONCLUSIONS: POD0 PT following lumbar fusion is feasible in the majority of patients and is associated with a shorter hospital stay without increased complications. Failure to participate was not associated with the baseline patient or surgical characteristics evaluated in this study. Instead, the most common barriers were postoperative pain, transient medical issues, and anesthesia-related somnolence, suggesting that optimization of modifiable perioperative factors may improve the implementation of POD0 PT.

Humans↗

PubMed2026

Proteomic insights into the immunomodulatory effects of Ca/Sr co-doped sol-gel coatings for titanium implants.

Ionic functionalization of biomaterial coatings has emerged as a powerful strategy to regulate early host responses at the implant interface. However, how combined Ca/Sr incorporation governs the adsorbed proteome and downstream immune signaling remains poorly understood. This study analyses, employing in vitro tests and proteomics, the effect of adding Sr and Ca to Si-based coatings designed to bioactivate Ti implants. Hybrid Si-based coatings were synthesized by the sol-gel route with a fixed Ca content (0.5 wt%) and increasing Sr contents (0.5, 1.0, 1.5 wt%), and their physicochemical properties, ion release kinetics, and hydrolytic stability were characterized. The coatings remained highly crosslinked despite Ca/Sr incorporation, whereas the highest Sr content increased hydrolytic degradation to around 70% after 56 days. Proteomic analysis identified 183 adsorbed proteins, of which 56 were differentially adsorbed on Ca/Sr-coatings, mainly associated with immune and coagulation pathways. In vitro, RAW 264.7 showed increased gene expression of TNF-α and TGF-β; with an enhanced TNF-α secretion by the addition of Ca and Sr. In parallel, MC3T3-E1 indicated that Ca/Sr-coatings were not cytotoxic and did not impair cell proliferation. However, ALP activity was reduced in the co-doped groups, indicating that the immunomodulatory effects induced by Ca/Sr incorporation were not accompanied by enhanced early osteogenic differentiation. The Ca/Sr combination induced alterations in the adsorption of immune-related proteins, which correlated with the in vitro findings. The deeper insight into how Ca/Sr mixtures modulate protein adsorption on biomaterial surfaces may be key to understanding the immunomodulatory capacity of these bioactive cations.

Animals↗

PubMed2026

Anti-inflammatory agents after hip and shoulder arthroplasty: A systematic review and meta-analysis.

BACKGROUND: Postoperative inflammation after arthroplasty contributes to pain, delayed mobilization and prolonged hospitalization. Recent randomized trials have evaluated pharmacological anti-inflammatory strategies within contemporary enhanced recovery pathways, but evidence after hip and shoulder arthroplasty remains scattered across different drug classes and perioperative regimens. OBJECTIVES: To synthesize recent randomized controlled trial (RCT) evidence on perioperative anti-inflammatory agents after hip and shoulder arthroplasty. METHODS: PubMed, Embase, Cochrane Library and Web of Science were searched for English-language RCTs published from January 2020 to March 2026. The 2020-2026 window was selected to update evidence generated under modern arthroplasty, anesthesia, multimodal analgesia and enhanced recovery after surgery (ERAS) pathways. Eligible trials included adults undergoing hip or shoulder arthroplasty and compared corticosteroids, cyclooxygenase-2 (COX-2) inhibitors, nonsteroidal anti-inflammatory drug (NSAID)-based/local anti-inflammatory regimens, or related anti-inflammatory interventions with placebo, saline, no treatment, or the same regimen without the target component. Weighted mean differences (WMDs) were pooled using random-effects models. RESULTS: Nine RCTs involving 800 patients were included. Anti-inflammatory interventions significantly reduced postoperative C-reactive protein (CRP) [WMD=-32.18, 95% confidence interval (CI) (-41.16, -23.21), P<0.001], interleukin-6 (IL-6) [WMD=-31.25, 95% CI (-41.79, -20.77), P<0.001], rest pain [WMD=-0.41, 95% CI (-0.58, -0.23), P<0.001], activity pain [WMD=-0.56, 95% CI (-0.83, -0.29), P<0.001] and hospital stay [WMD=-0.54, 95% CI (-0.92, -0.15), P=0.006]. CONCLUSION: Recent RCT evidence suggests that perioperative anti-inflammatory interventions can attenuate early inflammatory responses and improve short-term pain and recovery after hip and shoulder arthroplasty. Because data were limited and clinically heterogeneous, the findings should not be interpreted as evidence favoring a specific drug class, dose, route, or timing.

Humans↗

PubMed2026

Comparative effects of 12-week resistance training on unstable and stable surfaces on muscle stiffness, muscle co-activation, and balance in older patients with knee osteoarthritis.

OBJECTIVE: This randomized trial compared the effects of unstable resistance training (URT), involving resistance exercises on unstable surfaces, and stable resistance training (SRT), performed on stable surfaces, on muscle stiffness, co-activation, and balance in older adults with knee osteoarthritis (KOA). We hypothesized that URT would yield greater improvements by enhancing neuromuscular adaptability. METHODS: Fifty patients with KOA were randomly assigned to the URT group (n = 25) or the SRT group (n = 25). After attrition, 46 participants (URT: n = 23; SRT: n = 23) completed the intervention and were included in the final analysis. Both groups completed a 12-week supervised lower-limb resistance training program (3 sessions/week) consisting of 10 exercises performed under either unstable or stable support conditions. RESULTS: After 12 weeks of intervention, both groups showed significant reductions in pain intensity (p < 0.001). However, compared with the SRT group, the URT group demonstrated significantly greater reductions in quadriceps stiffness (p < 0.05), selected hamstring stiffness outcomes (p < 0.05), and quadriceps-hamstring co-activation (p < 0.001), alongside superior improvements in both dynamic balance and static balance (all p < 0.05). CONCLUSION: While both training modalities are effective for pain relief, URT elicited greater improvements in balance-related performance and neuromuscular-mechanical outcomes than SRT in older adults with KOA. These findings suggest that incorporating unstable support conditions into resistance training may provide additional rehabilitation benefits for this population.

Humans↗

PubMed2026

Adherence and efficacy of the 0 - 7 - 21-day versus the 0 - 1 - 6-month hepatitis B vaccination schedules among people who use drugs: a two-year randomized controlled trial.

BACKGROUND: To compare the adherence and efficacy between the 0 - 7 - 21-day and the 0 - 1 - 6-month hepatitis B virus (HBV) vaccination schedules among people who use drugs (PWUD) in China. RESEARCH DESIGN AND METHODS: A randomized controlled trial was conducted in 1261 HBV-susceptible PWUD from compulsory isolated detoxification centers (CIDCs) and methadone maintenance treatment (MMT) clinics in Xi'an. A 20 µg per-dose vaccine was used. HBV surface antibody (anti-HBs), surface antigen, and core antibody were tested at months 7, 15, and 22 after the first dose. RESULTS: Third-dose coverage was significantly higher in the 0 - 7 - 21-day group (74.40%) than in the 0 - 1 - 6-month group (51.58%, p < 0.001), mainly driven by participants from CIDCs (77.75% vs. 45.69%). Anti-HBs positive rates at months 7, 15, and 22 among participants who completed all three doses were significantly higher for the 0 - 1 - 6-month schedule (90.71%, 76.82%, and 67.35%) than for the 0 - 7 - 21-day schedule (74.23%, 49.40%, and 40.95%; all p < 0.001). HBV infection incidence was similar between schedules, but significantly different between vaccinees and non-vaccinees (p = 0.018). CONCLUSIONS: The 0 - 7 - 21-day schedule substantially enhances three-dose completion in PWUD, but induces a notably weaker anti-HBs response and persistence. Schedules should be selected based on the management models for PWUD and their individual characteristics. CLINICAL TRIAL REGISTRATION: Chinese Clinical Trial Registry (ChiCTR1900022403).

Humans↗

PubMed2026

Fused Deposition Modeling (FDM) of polyether-ether-ketone (PEEK) dental implants: A systematic review of the effect of printing parameters on mechanical behaviour and surface quality.

PURPOSE: This systematic review evaluated how FDM printing parameters influence mechanical behaviour and surface characteristics of 3D-printed PEEK and identified parameter combinations linked to the most favourable mechanical performance and surface quality. MATERIALS AND METHODS: An electronic search was conducted in: MEDLINE (Ovid), PubMed, Embase, Web of Science, Scopus, and Compendex (last update: January 2025). Studies that evaluated the effect of FDM printing parameters on mechanical and surface properties of PEEK were included. Outcomes comprised compressive, tensile, and flexural strengths, elastic modulus, fracture toughness, surface hardness, roughness, and wettability. RESULTS: Of 4005 reports screened, 54 manuscripts were included. 92.6% (n = 50) of articles showed low risk-of-bias, while 7.4% (n = 4) showed medium risk-of-bias. Tensile strength was the most investigated mechanical parameter (78%), followed by elastic modulus (41%), flexural strength (30%), compressive strength (20%), and fracture toughness (6%). Surface roughness was the most evaluated surface property (30%), followed by hardness (17%) and wettability (6%). Across studies, higher printing temperatures, lower printing speed, thinner layer thickness, and maximum infill ratio in a horizontal printing orientation were associated with higher strengths, less warpage, increased accuracy, and improved surface quality. CONCLUSION: Specific combinations of FDM printing parameters can significantly improve the mechanical and surface properties of PEEK. However, it is difficult to meet all the optimal conditions simultaneously. Thus, balancing between different parameters must be considered in practical production.

Benzophenones↗

PubMed2026

Surface shaving proteomics reveals a parasite-encoded protein embedded in the spore filaments of Ameson portunus.

The surfaces of microsporidian spores are frequently adorned with filamentous appendages of unknown origin and function. Although some studies suggest that these structures may be host-acquired, the absence of identified parasite-encoded components has hindered our understanding of their biogenesis and role in infection. Here, we applied surface shaving proteomics to profile the surface-exposed proteins of Ameson portunus -a microsporidian pathogen causing severe myopathy in portunid crabs. Our analysis identified 120 candidate surface proteins. Nineteen of these were highly enriched by both direct shaving and SDS-assisted methods, representing a high-confidence surfome. Among these, a previously uncharacterized protein, designated 8-2.11, was confirmed via immunofluorescence assay and immunoelectron microscopy. It was expressed early in development stage and specifically localized to the spore wall and hair-like projections (HLPs) of microsporidia. Notably, polyclonal antibodies against recombinant 8-2.11 recognized a native protein in spores, specifically labeled the HLP structures, and showed no cross-reactivity with host cells. Our results provide the first evidence of a parasite-encoded protein that is integral to HLP formation, challenging the prevailing hypothesis that these surface filaments are solely host-derived. This study establishes surface shaving as a powerful tool for microsporidian research and highlights 8-2.11 as a promising candidate for future functional studies on spore surface biology and host-parasite interactions.

Animals↗

PubMed2026

Three-dimensional source apportionment and quantitative characterization of horizontal and vertical transport fluxes of O3 and its precursors in the Beijing-Tianjin-Hebei region, China.

Persistent surface ozone (O3) pollution in the Beijing-Tianjin-Hebei (BTH) region is driven by coupled precursor emissions and multi-scale transport, yet its altitude-dependent transport and source contributions remain insufficiently quantified. Here we integrated the Weather Research and Forecasting and the Comprehensive Air Quality Model with Extensions with the Ozone Source Apportionment Technology and a quantitative transport-flux framework to characterize three-dimensional source apportionment and horizontal/vertical fluxes of O3, Volatile Organic Compounds‌ (VOCs), and Nitrogen Oxides (NOx) across dynamic meteorological scenarios. Simulations showed that VOCs and NOx were dominated by local emissions near the surface (73.61 %-82.18 %), whereas surface O3 was primarily controlled by regional transport, with local contributions of only 11.01 %-13.75 %. Notably, the transport dominance further strengthened with altitude, exceeding 93 % at 1.8 km. Industrial and transportation emissions together contributed more than 75 % of precursor emissions and account for approximately 80 % of O3 formation, while favorable/unfavorable meteorological years modulated long-range transport efficiency and the vertical distribution of contributions. Horizontal flux analysis highlighted three major pathways (Northwest-Southeast, Southeast-Northwest, and Southwest-Northeast), with Shijiazhuang serving as a critical pollutant "sink" across altitude layers. Vertical fluxes revealed an altitude transition near 600 m: net downward transport dominated below 600 m, whereas enhanced summer convection promoted upward transport above 600 m. These results support altitude-dependent, scenario-specific strategies for coordinated regional O3 mitigation in the BTH region.

Ozone↗

PubMed2026

Avian egg incubation period: Revisiting existing allometric relationships via surface area-to-volume ratio of an egg.

The incubation period (I) for bird eggs varies among species and is used in establishing allometric relationships. Research on variations in I shed light on the evolutionary mechanisms that gave rise to the differentiation of embryonic development in distinct taxa of birds. Here, using a sampling of 444 images from 444 avian species, 89 families and 30 orders, we calculated their major geometric dimensions: volume (V) and surface area (S). An assessment of the relationship between I and the measured and calculated egg parameters demonstrated the closest and most significant correlation (R = -0.760) between I and the S/V ratio that was adopted as a conditional indicator and reflects the embryo's metabolic rate. Approximation of the values of these parameters made it possible to derive a power-law dependence for the prediction of I depending on the S/V value of a particular egg (R2 = 0.757). The prediction accuracy was higher (R2 = 0.783) if the eggs of the family Procellariiformes (petrels), whose I value is characterized by a longer time, were removed from the general sampling computation. We conclude that the value of the S/V ratio can characterize both the metabolism of an embryo and the conditional thermal conductivity of an egg, which aids in ensuring the temperature regime of egg incubation.

Animals↗

PubMed2026

Preparation and study of non-thrombotic and biostable sulfobetaine-modified small-diameter polyurethane vascular grafts.

A novel sulfobetaine-modified polysiloxane-polycarbonate polyurethane (ZSiPCU) was synthesized. In vitro characterizations revealed that polysiloxane surface enrichment endowed the material with excellent biostability. Importantly, sulfobetaine zwitterions formed a robust hydration layer, effectively suppressing protein adsorption and platelet adhesion to ensure outstanding hemocompatibility. Furthermore, the material supported the adhesion and proliferation of vascular endothelial cells, confirming its cytocompatibility, while its elastomeric matrix provided rapid mechanical self-sealing capabilities. Electrospun ZSiPCU grafts were evaluated in a 3-month rat abdominal aorta model, maintaining high patency rates and facilitating in situ luminal endothelialization and smooth muscle cell remodeling. Additionally, superior puncture resistance of the grafts was demonstrated by puncture tests, with complete hemostasis achieved within 2 mins through mechanical self-sealing.

Polyurethanes↗

PubMed2026

Interface-dependent V. parahaemolyticus biofilm under varying temperatures, media, and oxygen conditions: implications for seafood safety.

Vibrio parahaemolyticus biofilms play a critical role in pathogen persistence in marine and seafood-processing environments, where oxygen availability, temperature, and surface interfaces vary widely. This study investigated biofilm development by three strains on partially submerged stainless-steel coupons under gas-liquid-wall (GLW) and fully submerged (SM) interfaces. Viable cell counts (log₁₀CFU/cm2) along with normalized protein concentration per viable cell (nProt) and normalized polysaccharide concentration per viable cell (nPol) were measured, under aerobic and anaerobic conditions across a temperature range of 15-30 °C, using tryptic soy broth with 3% NaCl (TSB) and seawater-based medium (SW). GLW biofilms consistently exhibited higher cell counts (6.4-7.3 log₁₀CFU/cm2) compared to SM biofilms (5.9-6.3 log₁₀CFU/cm2), suggesting that enhanced oxygen diffusion promotes bacterial proliferation. Conversely, SM biofilms exhibited significantly higher nProt and nPol levels (p < 0.001), indicating increased production of the extracellular polymeric substance (EPS) matrix under low-oxygen, high-nutrient conditions. Microscopy and three-dimensional surface plot analyses revealed relatively uniform biofilm layers at the GLW interface, whereas SM biofilms formed heterogeneous, tower-like structures. EPS production was further influenced by medium composition, oxygen, and temperature. SM biofilms grown in SW exhibited significantly higher nProt and nPol than those in TSB under aerobic conditions (p < 0.001), indicating enhanced matrix stabilization. Under anaerobic conditions at 15 °C, nProt and nPol were higher, whereas under aerobic conditions, peak nProt and nPol occurred at elevated temperatures. These findings highlight a trade-off between bacterial growth and matrix production and provide insight into biofilm adaptation and persistence in seafood-processing environments. These insights may help develop improved biofilm control and seafood safety management.

Biofilms↗

PubMed2025

Tracking microplastic contamination across seasons in a freshwater reservoir: Evidence from surface water, sediments, and fishes.

Microplastics (MPs) are prevalent contaminants in aquatic environments, posing substantial ecological and health risks. These particles migrate within the different layers of aquatic bodies with time and affect the respective biota. Thus, to get an in-depth understanding of the particles, this current study investigated the seasonal distribution, morphological and chemical characteristics, along with potential ecological and human health impacts in the samples including surface water, sediment, and fish from a drinking water supplying reservoir in eastern India. Across three different seasons, pre-monsoon, monsoon, and post-monsoon samples were collected using optimized methods. Results revealed distinct seasonal trends: MP abundance in surface water peaked during the monsoon (mean: 1.15 MPs/L), while sediment showed the highest concentrations in the pre-monsoon (mean: 596 MPs/kg), indicating temporal accumulation dynamics influenced by runoff, hydrodynamics, and sedimentation. Fish gut analysis confirmed ingestion of MPs across five species, with concentrations ranging from 26 to 100 MPs/kg, depending on feeding habits. The most dominant MP type were fragments, followed by fibers, films, and beads. Polymer analysis via µFTIR identified polyethylene, polypropylene, and polyvinyl chloride as prevalent, with hazard assessments (i.e., Polymer Hazard Index (PHI)) indicating medium to very high ecological risks. Heavy metal association was more dominant in the MPs isolated from sediments than the waterborne MPs. Pollution Load Index (PLI) values were > 1 in most seasons, confirming contamination. Health risk analysis suggested potential exposure through both drinking water and fish consumption. This study emphasizes the need for seasonal monitoring, improved waste management, and mitigation strategies to address MP pollution in freshwater ecosystems.

Microplastics↗

PubMed2026

Comprehensive source-risk assessment of organophosphate esters in surface water of the Dianchi Lake Basin, Yunnan, China.

Organophosphate esters (OPEs), widely used as flame retardants and plasticizers, have been increasingly detected in aquatic environments. However, investigations of their distribution in high-altitude plateau lakes remain scarce. Identifying and quantifying the sources and associated risks of OPEs are crucial for subsequent water environment management. In this study, an integrated source-risk analysis approach was employed by combining the Positive Matrix Factorization (PMF) model, the Geodetector (GD) model, and risk quotient (RQ). Analysis of 14 OPEs in surface waters of the Dianchi Lake Basin (DLB) revealed 12 detectable compounds, with total OPEs concentrations (ΣOPEs) ranging from not detected (ND)-64.6 ng/L during the wet season and ND-35.8 ng/L during the dry season. Elevated ΣOPEs were primarily observed at inflow sites in the northern part of the lake and in urban rivers. Source apportionment indicated four major contributing sources: agricultural films containing flame-retardant and plasticizer additives, traffic-related particulate emissions, releases from household and personal care products, and industrial production and applications of flame retardants in plastics, electronics, and related products (the predominant source). The ecological impact caused by OPEs ranges from no risk to low risk, with tris(2-chloroethyl) phosphate emitted from industrial source being the primary driver of potential environmental risk. These findings highlight the necessity of prioritizing industrial sources in future management strategies. Overall, this study provides a methodological framework for source apportionment and risk assessment of OPEs and offers scientific evidence to support environmental management of OPEs in the DLB.

Environmental Monitoring↗