SEARCH · Search PubMed

Results for “chemistry, manufacturing, and controls (CMC)”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,812 records · Page 3Linked to original sources

PubMed2026

Measurement of low-density lipoprotein cholesterol and other circulating lipids in Brazil: a systematic literature review.

Accurate laboratory assessment of circulating lipids underpins cardiovascular risk stratification, yet clinical interpretation depends not only on the assays but on the formula chosen to estimate low-density lipoprotein cholesterol (LDL-C). This review integrates the 2019-2025 evidence on laboratory methods for triglycerides (TG), total cholesterol (TC), and high-density lipoprotein cholesterol (HDLC), and on the formulas estimating LDL-C, VLDL-C, and non-HDL cholesterol, to determine how these should be measured, reported, and harmonized in Brazil, where lipid thresholds are adapted from international consensus. A PRISMA 2020 systematic search (PROSPERO CRD420251241064) of PubMed/MEDLINE, Scopus, SciELO, LILACS, Web of Science, and Embase retrieved 57,915 records; after removing 38,210 duplicates, 19,705 titles/abstracts were screened, 312 full texts assessed, and 25 sources included. Enzymatic colorimetric assays remain standard for TG, TC, and HDLC. For LDL-C, Martin/Hopkins classifies more accurately than Friedewald (89.6% vs 83.2% correct categorization in 5,051,467 patients), particularly at high TG and low LDL-C, while Sampson/NIH and modified Sampson/NIH extend reliable estimation into hypertriglyceridemia and very low LDL-C; direct measurement is reserved for TG beyond the validated range. Although the review centers on the Friedewald, Martin/Hopkins, and Sampson/NIH families that dominate guideline practice, other published equations exist and are addressed in context. In Brazil, atherogenic-lipid thresholds are risk-based decision limits rather than reference intervals; national surveys describe lipid distributions but were not designed to establish them. Analytical standardization through traceability programs, multicenter validation of formulas, and-where the distribution-based construct applies (HDLC, pediatrics)-nationally derived reference intervals are priorities for equitable cardiovascular risk assessment in Brazil.

Humans↗

PubMed2026

Quality assessment, prognostic factors, and biomarkers for brain tumor analysis: a comprehensive systematic review.

The brain tumors possess different causative factors and properties, making their diagnosis and treatment difficult. Growth of these cancers usually leads to compression of the adjacent nerves and obstruction of the flow of cerebrospinal fluid, thus leading to increase in intracranial pressure. This affects the working of brain in many ways; thus, the difficulty involved in its treatment. With the improvements in technology in neuroimaging, including Diffusion Tensor Imaging (DTI), Positron Emission Tomography (PET), and multiparametric Magnetic Resonance Imaging (mpMRI), the diagnosis process has become easy. The effectiveness of any form of therapy in such patients depends primarily on their prognosis. While it is a common practice that physicians determine the prognosis of the disease by considering the age of the patient, histological grade of the tumor, and resection status, now this method has become more comprehensive by adding molecular signature and genetic analyses to the list of criteria. Next-generation sequencing (NGS) allows a reliable molecular classification. It increases the level of risk stratification, facilitating the application of therapies tailored to individual patients. Thus, molecular oncology has greatly changed our views on brain tumors' pathology and prognosis while neoadjuvant treatments aim at increasing the survival rate. On the other hand, radiogenomics is a field of study that combines non-invasive imaging phenotypes and genomic information in order to find unique molecular signatures of tumors without collecting samples from tumors. Molecular biomarkers are absolutely essential in the diagnosis of cancer, treatment monitoring, and recurrence of cancer. Advances in liquid biopsy technology, particularly the methods for circulating tumor DNA (ctDNA) and Extracellular Vesicle (EV) based analysis, have enabled the possibility of non-invasive monitoring of the progression of the tumors over time. This review highlights key studies and important scientific works about imaging technologies, biomarkers, and prognostic factors of malignant brain tumors.

Humans↗

PubMed2026

Clinicopathological response and survival outcomes of HER2-low versus HER2-zero early breast Cancer: A systematic review and Meta-analysis.

BACKGROUND: Breast cancer is the most common malignant tumor in women. Human epidermal growth factor receptor 2 (HER2) is a key biomarker for classification and treatment. A subgroup with HER2-low expression has been identified, but existing evidence is heterogeneous. This systematic review and meta-analysis compared pathological response and survival outcomes between HER2-low and HER2-zero early-stage breast cancer to clarify prognostic features. METHODS: This study followed PRISMA guidelines and was registered in PROSPERO (CRD420251120506). PubMed, Embase, Web of Science, ClinicalTrials.gov, and major oncology conferences were searched through September 2025. Cohort studies of early-stage breast cancer comparing HER2-low (IHC 1+/2+ and ISH-negative) vs. HER2-zero with extractable pCR, DFS, or OS data were included. Studies involving HER2-positive patients or inconsistent definitions were excluded. Meta-analyses were performed using RevMan 5.3. RESULTS: Twenty-eight studies involving 115,182 patients were included. HER2-low patients showed significantly lower pCR rates (OR = 0.58, 95% CI: 0.52-0.65). DFS favored HER2-low (multivariate HR = 0.75, 95% CI: 0.69-0.83), especially in HR+ tumors, with a weaker effect in HR- cases. OS also favored HER2-low (HR = 0.80, 95% CI: 0.72-0.89), mainly driven by the HR- subgroup; no OS difference was seen in HR+ tumors. Sensitivity analyses and funnel plots indicated robust results with no apparent publication bias. Overall study quality was high (17 high-quality, 11 moderate-quality). CONCLUSION: HER2-low early breast cancer shows lower pCR after neoadjuvant therapy but better long-term survival. These findings support the clinical relevance of HER2-low as a biologically meaningful subgroup within HER2-negative disease, while its status as a stable and independent subtype still requires further validation through prospective studies, standardized testing, and multi-omics investigation.

Humans↗

PubMed2026

Molecular Landscape and Advanced Diagnostic Technologies for BRAF Mutations in Cancer: From Quantitative PCR and ddPCR to CRISPR-Based Platforms.

BRAF mutations are key oncogenic alterations across multiple malignancies, including melanoma, thyroid carcinoma, colorectal cancer, non-small cell lung cancer, glioma, and hairy cell leukemia. The most prevalent variant, BRAF-V600E, induces constitutive activation of the MAPK signaling pathway, promoting tumor progression and influencing therapeutic responsiveness. Accurate detection of BRAF alterations is therefore essential for molecular classification, prognostic assessment, treatment selection, and resistance surveillance. This review summarizes the molecular heterogeneity of BRAF mutations and critically evaluates current diagnostic methodologies. Conventional approaches such as allele-specific PCR and Sanger sequencing are compared with advanced quantitative platforms, including high-resolution melting analysis, droplet digital PCR, and next-generation sequencing, with emphasis on analytical sensitivity, mutation coverage, and clinical applicability. Emerging technologies such as CRISPR-based assays, rolling circle amplification systems, and nanoparticle-based biosensors and point-of-care diagnostic platforms are also discussed for their potential to enhance ultra-sensitive detection, particularly in liquid biopsy settings. These emerging tools are highlighted for their potential to enable ultra-sensitive, rapid, and decentralized mutation detection, particularly in liquid biopsy settings. Key challenges, including intratumoral heterogeneity, low allele-frequency variants, FFPE-associated artifacts, and clonal evolution under therapeutic pressure, are examined within a translational framework. In addition, we examine critical barriers to clinical implementation, including standardization, cost, and global accessibility of molecular diagnostics, and outline potential solutions through scalable technologies and decentralized testing strategies. We propose that optimal BRAF testing requires a mutation subclass-informed and clinically integrated strategy combining comprehensive baseline profiling with longitudinal molecular monitoring. Future diagnostic paradigms will likely integrate multi-omics data and artificial intelligence (AI)-assisted interpretation to refine precision oncology implementation. Looking forward, we propose that optimal BRAF testing will require integration of multi-omics profiling with AI-assisted interpretation, enabling automated variant classification, real-time clinical decision support, and improved prediction of therapeutic response and resistance.

Humans↗

PubMed2026

Furanic compounds in different coffee extraction systems: Analysis of the main influencing factors and correlation with acrylamide.

This study investigates how different coffee types representative of distinct roast profiles and brewing methods jointly affect the occurrence of furanic compounds and acrylamide in brewed coffee. Coffees were prepared using eight extraction methods (AeroPress, Clever, Chemex, French Press, Moka, Pure Brew, Turkish and V60). Five furanic compounds (furfural, furfuryl acetate, 5-methylfurfural, furfuryl alcohol and 5-hydroxymethylfurfural) were quantified in coffee powders and brews by HS-SPME-GC-MS, while acrylamide was determined by UHPLC-MS/MS. Moka and Turkish brews consistently exhibited the highest concentrations of furanic compounds, whereas paper-filtered pour-over methods (V60 and Chemex) showed the lowest levels. Pearson correlation analysis revealed coffee-dependent relationships between furanic compounds, acrylamide and extraction parameters with the strongest associations observed in dark-roasted coffee, reflecting advanced Maillard reaction chemistry. Overall, these results demonstrate that contaminant levels arise from the combined effects of intrinsic coffee chemistry and brewing mechanics and support targeted mitigation strategies: such as roast selection and brewing method optimization.

Acrylamide↗

PubMed2026

Self-healing materials for food packaging: Design principles, activation mechanisms and implications for food safety.

Self-healing materials (SHMs), originally developed to restore mechanical integrity, have recently attracted growing interest in food packaging. By autonomously repairing physical damage, SHMs help preserve packaging integrity, barrier performance, food safety, and shelf-life during storage and transportation. This review summarizes recent advances in the design principles, activation mechanisms, material systems and food packaging applications of SHMs. Key healing strategies, including microencapsulation, dynamic covalent bond exchange, reversible non-covalent interactions and responsiveness to external stimuli such as temperature, pH, and humidity, are discussed. Representative material systems, including biopolymer-based films, hydrogels, nanocomposites, and stimuli-responsive polymers are evaluated with respect to their relevance to packaging animal-derived foods, fruits, and vegetables. Performance evaluation methods, sustainability implications, and food-contact safety concerns are addressed. Despite promising healing efficiency and mechanical resilience, challenges remain regarding production cost, food-grade safety, migration risks, trigger compatibility and stability under fluctuating environmental conditions. Future research should focus on scalable manufacturing, standardized evaluation protocols, repeated damage-healing safety assessment, regulatory compliance, and integration with intelligent packaging technologies.

Food Packaging↗

PubMed2026

From host response to genomic targets: electrochemical biosensing of tuberculosis biomarkers.

Tuberculosis (TB) remains one of the leading causes of death from a single infectious agent worldwide, with timely diagnosis continuing to be a major challenge, particularly in resource-limited settings. Conventional TB diagnostic methods are limited by low sensitivity, long turnaround times, and an inability to reliably differentiate latent from active disease. Biomarker-based diagnostic strategies have therefore gained increasing attention as they offer the potential to improve early detection, disease differentiation, and treatment monitoring. Herein, we examine electrochemical biosensing strategies for TB diagnostics using a biomarker-class-driven framework, covering host-response biomarkers (IFN-γ and TNF-α), pathogen-derived antigens (ESAT6, CFP10, CFP10-ESAT6, MPT64, Ag85, HspX and LpqH), cell-wall signatures and whole-cell markers (LAM and whole cell Mtb), and genomic markers (Mtb DNA and IS6110). Through structured comparison of recognition elements, biointerface designs, signal amplification strategies, electrochemical techniques, matrices, and validation levels, this review identifies the most promising technical approaches for different TB biomarker classes. It further highlights key translational bottlenecks, including limited clinical validation, buffer-based testing, complex multistep amplification, redox-probe dependence, matrix fouling, and insufficient evidence of manufacturability. This review therefore provides practical guidance for developing electrochemical TB biosensors that are analytically sensitive, clinically relevant, and suitable for decentralized diagnostic applications.

Biosensing Techniques↗

PubMed2026

Inducible flocculation in Komagataella phaffii enables enhanced biomass separation for biopharmaceutical production.

Biomass separation represents a critical bottleneck in Komagataella phaffii-based biopharmaceutical processes, as typically high cell densities of 40 - 50 % create significant operational, technical and economic challenges for harvest operations. Yeast cell aggregation (flocculation) provides a solution to accelerate cell sedimentation by increasing particle size, thus allowing to improve biomass-supernatant separation efficiency during both natural gravity settling and (continuous) centrifugation operations. This study demonstrates successful engineering of K. phaffii strains with an inducible flocculation phenotype using CRISPR/Cas9-based genome editing to integrate the Saccharomyces cerevisiae FLO1 (ScFLO1) gene under control of various regulatory elements, including methanol-inducible and derepressible promoters. Flocculation strength could be enhanced by implementing transcriptional positive feedback circuits based on the methanol-inducible AOX1 promoter. To address methanol-free production requirements, we developed alternative systems to retrofit PAOX1-based ScFLO1 expression and exploited the derepressible PDF promoter, offering broader compatibility with biopharmaceutical manufacturing facilities. Flocculating cells cultivated in a bioreactor demonstrated significantly improved sedimentation behavior, with considerably lower supernatant turbidity after short low-speed centrifugation or gravity sedimentation compared to non-flocculating controls. Crucially, cell flocculation had no negative impact on product amount and quality when expressing a multivalent NANOBODY® VHH molecule with pharmaceutical relevance. Thus, this work establishes the first genetically engineered flocculation system in K. phaffii compatible with recombinant protein production, providing the basis for an innovative approach to streamline harvest operations in biopharmaceutical processes.

Flocculation↗

PubMed2026

Dengue and chikungunya vaccines past, present and future: implications for travelers.

PURPOSE OF REVIEW: Novel vaccines for dengue and chikungunya viruses offer new prevention options against two globally important arboviral diseases. This review summarizes recent developments in vaccine licensure, implementation, real-world experience and research priorities, with emphasis on implications for both endemic populations and travelers. RECENT FINDINGS: Of the three live-attenuated dengue vaccines licensed to date, TAK-003 is authorized in >40 countries and Butantan-DV in Brazil, while manufacturing of CYD-TDV is discontinued. Long-term and postmarketing data continue to refine understanding of serotype-specific protection, waning immunity, and rare adverse events.For chikungunya, two single-dose vaccines are licensed-a live-attenuated vaccine (VLA1553) and virus-like particle vaccine (PXVX0317). Uptake is guided by emerging safety and effectiveness data, with each platform offering potential advantages in different settings.Further data on long-term protection, safety, effectiveness, use in vulnerable populations and integration into outbreak management and immunization systems is anticipated. SUMMARY: Dengue and chikungunya vaccines are increasingly being used in immunization programs and pretravel consultations. Further real-world data are needed-particularly for seronegative dengue vaccine recipients and older, immunocompromised or medically at-risk adults. Research priorities include developing single-dose, nonlive dengue vaccines suitable for high-risk groups, understanding long-term chikungunya vaccine performance, and exploring broader flaviviral or pan-arboviral platforms.

Humans↗

PubMed2026

Variability and ozone formation potential of ambient non-methane hydrocarbons in a tropical semi-arid atmosphere of northwest India.

We present first-time measurements of twenty-six ambient non-methane hydrocarbons (NMHCs; C2-C8), including isoprene (C5H8), at a semi-arid site in northwest India (Ajmer; 26.45°N, 74.64°E), during January 2022-December 2023. Ambient samples were analyzed using a thermal desorption gas chromatography system equipped with dual flame ionization detectors. Daily total NMHC levels ranged from 6 ppbV to >100 ppbV. Most NMHCs, except isoprene, toluene, ethylbenzene, m-xylene and o-xylene, exhibited the highest levels in winter and the lowest in the monsoon. In contrast, others were highest in the pre-monsoon and toluene was highest during monsoon. These variations reflect the combined influence of emissions, chemistry and meteorology. Toluene and o-xylene were the dominant NMHCs (25 %-67 %). Correlation analyses indicated major contributions from liquefied petroleum gas (LPG) and vehicular emissions, with additional influence from urban and oil and natural gas activities. Compared with other Indian sites, NMHCs levels at Ajmer were 2-5 times lower than Ahmedabad and Udaipur and 10 times lower than Delhi. The total ozone formation potential was highest in the monsoon (about 175 ppbV) and lowest in the post-monsoon (about 55 ppbV), with dominance of o-xylene (24 %-33 %) and toluene (8 %-37 %). Propylene-equivalent concentrations were highest in the pre-monsoon (30.23 ppb C) and lowest in the post-monsoon (7.28 ppb C). Similarly, OH reactivity was highest in the pre-monsoon (19.58 s⁻¹) and lowest in the post-monsoon (4.71 s⁻¹), dominated by benzene and toluene. These findings emphasize the importance of NMHC chemistry in a climatically sensitive region and highlight the need for their continuous monitoring.

India↗

PubMed2026

Strategy for enhanced production of A40926B0 in Nonomuraea gerenzanensis using an efficient CRISPR/AsCas12f1 system.

The global emergence of vancomycin-resistant Gram-positive pathogens underscores the urgent need for efficient production of novel lipoglycopeptide antibiotics. Dalbavancin, a last-resort therapeutic agent, relies on its key biosynthetic precursor A40926B0, whose industrial manufacture is severely limited by the low yield of wild-type Nonomuraea gerenzanensis and inefficient genetic tools for this rare actinomycete. Here, we developed a high-efficiency CRISPR/AsCas12f1 genome editing system and applied systematic metabolic engineering to boost A40926B0 biosynthesis. First, conjugation conditions were optimized to elevate the transfer efficiency in N. gerenzanensis D11. The hypercompact AsCas12f1 nuclease showed markedly lower cytotoxicity than SpCas9 and enabled 100% gene deletion efficiency with preferred PAMs (TTTG, CTTG, GTTG). Second, we strengthened the shikimate pathway via multiple genetic strategies: overexpressing feedback-resistant DAHP synthase (aroG fbr ) and chorismate mutase/prephenate dehydrogenase (tyrA fbr ), as well as knocking out pheA. This manipulation blocks the phenylalanine synthetic branch and redirects metabolic flux toward the l-tyrosine branch. Third, we engineered the branched-chain fatty acid (BCFA) pathway via promoter replacement of bkdA2B2C2, LipAB, fabF and deletion of acdH to enhance isododecanoyl side-chain supply. The combinatorial engineering yielded strain B-13, which produced 1740 mg/L A40926B0 in shake flasks. Finally, 50-L fed-batch fermentation with continuous maltodextrin feeding further increased the titer to 1817 mg/L, the highest reported titer to date. This work establishes a robust CRISPR editing tool for N. gerenzanensis and provides valuable engineering references for precursor-oriented strain improvement targeting lipoglycopeptide antibiotics, offering insights for the industrial scale production of A40926B0.

A40926B0↗

PubMed2026

A versatile reversed-phase liquid chromatography charged aerosol detection method for streamlined monitoring of QS-21 content and stability in liposomal adjuvant formulations.

Identifying and quantifying an active adjuvant along with its degradants in drug formulations is essential for ensuring the safety and efficacy of the drug product. QS-21 is a potent adjuvant that is being evaluated in several clinical trials and is currently formulated in licensed vaccines that protect against shingles, malaria, and RSV. In aqueous environments, QS-21 is subject to hydrolytic degradation that is influenced by pH and temperature, resulting in the formation of a degradant known as QS-21 Hydrolyzed Product, QS-21 HP, which can occur during manufacturing and/or prolonged storage. The intact QS-21 and QS-21 HP induce distinct immune response profiles, making it critical to monitor the degradation of QS-21 in vaccine adjuvant formulations. To date, there has been a paucity of reliable assays for QS-21, its isomers, and degradant QS-21 HP in liposomal adjuvant formulations available that can be transferred seamlessly in quality control (QC) environments. Herein, we introduce a simple and QC-friendly liquid chromatography coupled to a charged aerosol detector (LC-CAD) enabled by stationary phase screening combined with in silico method development optimization. The method exploits 2.7 μm fused-core phenyl hexyl particles, ensuring its versatility in standard and ultra-high pressure LC systems. This approach demonstrates a high correlation between predicted retention time (RT) and experimental outcomes with overall ∆RT < 4%. In addition, this assay shows great linearity, precision, specificity, and accuracy to advance process development characterization of new vaccine formulations.

Liposomes↗

PubMed2026

Comparative Efficacy and Safety of Adjunctive 0.015% Triamcinolone Acetonide Topical Spray With Lokivetmab Versus Lokivetmab Monotherapy as 'Reactive Therapy' for Canine Atopic Dermatitis: A Randomised, Single-Blinded, Controlled Preliminary Trial.

BACKGROUND: Lokivetmab is considered an effective systemic therapy for dogs with atopic dermatitis (AD); however, utilisation of lokivetmab with adjunctive topical anti-inflammatory glucocorticoids has not been investigated in canine AD. OBJECTIVES: To evaluate the efficacy and safety of the combination therapy of lokivetmab and 0.015% triamcinolone acetonide (TCA) spray in dogs with AD. ANIMALS: Twenty dogs with nonseasonal AD. MATERIALS AND METHODS: This study was a randomised, single-blinded (investigators only) 4-week controlled trial. Dogs were randomised to receive lokivetmab monotherapy or lokivetmab-TCA spray per manufacturer instructions. Clinical assessments included the Canine Atopic Dermatitis Extent and Severity Index, 4th iteration (CADESI-04), CADESI-04E (i.e., extracted erythema grade alone) and the 10-grade pruritus Visual Analog Scale (PVAS10) at Day (D)0, D14 and D28. Complete blood count and serum biochemical analysis were performed on D0 and D28. RESULTS: The median CADESI-04 and CADESI-04E scores in the lokivetmab-TCA group were significantly reduced on D14 (p < 0.05 for both) and D28 (p < 0.01 for both) compared to baseline; there were no significant differences in lesional scores at any time point for the lokivetmab monotherapy group. Lokivetmab-TCA significantly reduced CADESI-04E values compared to the lokivetmab monotherapy group on D28 (p = 0.04). Both interventions significantly reduced PVAS10 scores on D14 and D28 compared to D0 (p < 0.05 for both groups). CONCLUSIONS AND CLINICAL RELEVANCE: Topical application of TCA spray may be a useful and safe adjunctive therapy for systemic lokivetmab to alleviate pruritus and clinical lesions in the initial management of canine AD patients.

Animals↗

PubMed2026

Health bill beneath the plastic feast: A phthalate contamination alert from takeout food containers.

The rapid growth of takeout food consumption in China has raised concerns regarding exposure to phthalic acid esters (PAEs) from food packaging. This study investigated the presence, source, contribution, and health risk of PAEs in commonly used takeout containers. Widespread contamination was observed, with total PAE concentrations ranging from below the limit of detection to 222,000 ng/g. Diisobutyl phthalate (DIBP), dibutyl phthalate (DBP), and bis(2-ethylhexyl) phthalate (DEHP) were identified as the predominant compounds, accounting for 7.50 %, 14.7 %, and 18.7 % of the total concentration, respectively. These PAEs may originated from additives during manufacturing and potential contamination of raw materials. Human exposure assessment showed that daily exposure doses of DIBP, DBP, and DEHP via container ranged from 0.00 to 2340 ng/(kg·day) among frequent takeout consumers, contributing substantially to overall PAE body burdens. To further assess exposure and associated risks, a nationwide online questionnaire survey was conducted across China. Based on this national-scale behavioral dataset, the health risks among Chinese residents were evaluated. Although the modeled non-carcinogenic risks of DIBP, DBP, and DEHP remained within acceptable limits, the simulation suggested that approximately 70 % of participants may experience potential exceedance of the carcinogenic risk threshold for DEHP. The frequency of takeout food consumption was identified as the most important factor affecting PAE exposure. These findings underscore the importance of limiting takeout frequency and reducing reliance on plastic containers to mitigate health risks. This study provides scientific evidence to support the development of safer packaging materials and informs public health strategies.

Phthalic Acids↗

PubMed2026

Clinical performance of two lithium disilicate CAD/CAM materials in posterior Class II inlay restorations: A 48-month randomised split-mouth clinical trial.

OBJECTIVES: To compare the clinical performance of Amber Mill (AM) and IPS e.max CAD (EM) lithium disilicate computer-aided design/computer-aided manufacturing (CAD/CAM) materials in posterior Class II inlay restorations and characterise their baseline properties. METHODS: Thirty-four adults received paired AM and EM posterior Class II inlays (68 restorations) in a triple-blind randomised split-mouth trial followed for 48 months. Restorations were evaluated at baseline and annually using revised World Dental Federation (FDI) criteria, with fracture and retention as the primary endpoint. Baseline characterisation included flexural strength, shear bond strength, translucency parameter, and scanning electron microscopy. McNemar, Wilcoxon signed-rank, Friedman, one-way analysis of variance, Tukey post hoc, and inter-rater agreement analyses were used. RESULTS: At 48 months, 18 paired participants were available for primary analysis. Failures occurred in 2 of 18 AM restorations and in 3 of 18 EM restorations, corresponding to success rates of 88.9% and 83.3%, respectively, with no significant between-material difference (McNemar p = 1.000). No catastrophic bulk ceramic fracture was observed. Secondary FDI scores remained mostly within the clinically acceptable range; marginal staining deteriorated over time in both groups (p < .001) without significant between-material differences. Baseline material testing showed significant material- and translucency-dependent differences in flexural strength, shear bond strength, and translucency. CONCLUSIONS: Within the limitations of the 48-month follow-up and the tested Class II inlay indication, AM showed clinical performance comparable to EM. Observed clinical complications were related to retention or marginal/interface behaviour. CLINICAL SIGNIFICANCE: For posterior Class II lithium disilicate CAD/CAM inlays, medium-term complications were mainly retention/interface-related, suggesting adhesive-interface durability may be as important as baseline ceramic strength.

Humans↗

PubMed2026

Clinical Performance of Bulk-Fill Versus Incremental Composite Placement Approaches in Vital Posterior Teeth: A 24 Months Randomized Controlled Trial.

BACKGROUND: Composite resin placement technique may influence marginal integrity, polymerization stress distribution, and long-term clinical performance of posterior restorations. This randomized controlled clinical trial evaluated the 24-month clinical performance of four different placement techniques in Class I posterior composite restorations. METHODS: Fifty patients aged 20-35 years presenting with four occlusal carious lesions each were enrolled, resulting in 200 restorations. Cavities (4-5 mm depth) were prepared according to caries extension. Restorations were randomly allocated into four equal groups (n = 50) according to placement technique: stamp technique, snowplow technique, modified incremental "pizza" technique, and bulk-fill technique. All materials were applied following manufacturers' instructions. Clinical evaluation was performed at baseline and after 6, 12, and 24 months using FDI criteria. Functional (fracture/retention, marginal adaptation), esthetic (marginal staining, anatomical form), and biological (postoperative sensitivity, secondary caries) properties were assessed by two calibrated evaluators. Statistical analysis was performed at a significance level of α = 0.05. RESULTS: Thirty-eight patients with a total of 152 restorations were evaluated at the end of the 24 months in line with FDI at the end of the study with 76% recall rates. No statistically significant differences were observed among groups regarding fracture/retention or secondary caries (p > 0.05). Marginal adaptation and marginal staining demonstrated minor deterioration over time across all groups, with statistically significant intergroup differences found (p < 0.05). Postoperative sensitivity was minimal and transient in all groups with no significant difference (p = 0.181). CONCLUSIONS: Within the limitations of this 24-month follow-up, the four placement techniques demonstrated comparable clinical performance in Class I posterior composite restorations. Selection of technique may therefore be guided by clinical preference and procedural efficiency rather than differences in short-term clinical outcomes. TRIAL REGISTRATION: ClinicalTrials.gov identifier: NCT07415317.

Humans↗

PubMed2026

Safety and efficacy of recombinant botulinum toxin type A (Eveotox®) in patients with post-stroke upper limb spasticity: Results from a Phase Ib/II clinical trial.

Upper limb spasticity is a common and disabling complication of stroke. Botulinum toxin type A (BoNT-A) is widely used for focal spasticity treatment, but naturally derived products may present limitations related to immunogenicity and manufacturing variability. Recombinant botulinum toxin type A, produced by genetic engineering without complexing proteins, may provide improved product consistency. This Ib/II study evaluated the safety, tolerability, and preliminary efficacy of recombinant botulinum toxin type A in adults with post-stroke upper limb spasticity. This multicenter, seamless Ib/II clinical study included an open-label dose-escalation Ib phase and a randomized, double-blind, placebo-controlled II phase. Adult patients with post-stroke upper limb spasticity received a single intramuscular injection of recombinant botulinum toxin type A or placebo. The primary endpoint in Phase II was the change from baseline in the Modified Ashworth Scale (MAS) score of the primary target muscle group at Week 4. Secondary endpoints included MAS and Tardieu scale changes in individual muscle groups, Disability Assessment Scale (DAS), Physician's Global Assessment (PGA), and immunogenicity. The Ib phase showed improvements in MAS, DAS, and PGA, indicating an early efficacy signal. In Phase II, recombinant botulinum toxin type A produced a significant reduction in MAS score of the primary target muscle group at Week 4 compared with placebo, with effects sustained through Week 12. At Week 4, the PGA score in the Eveotox® group showed a statistically significant improvement compared with the placebo group. While MAS and PGA scores showed significant improvement, DAS functional scores did not differ statistically from the placebo group at week 4. The treatment was generally well tolerated, and low incidence of antibodies were observed. Recombinant botulinum toxin type A was safe and effective in reducing post-stroke upper limb spasticity after a single administration. These results support further Phase III clinical evaluation.

Humans↗

PubMed2026

Clinical applications of digital twin technology in In Vitro Fertilisation.

BACKGROUND: Digital twin technology, originating from aerospace and manufacturing industries, has emerged as a transformative tool in healthcare. In vitro fertilisation (IVF) faces persistent challenges including suboptimal embryo selection, unpredictable treatment outcomes, and limited personalisation of protocols. Despite advances in assisted reproductive technology, existing literature exhibits fragmentation: artificial intelligence applications in embryo selection, ovarian stimulation, and endometrial assessment have been developed independently without systematic integration into comprehensive treatment frameworks. Digital twin technology offers unprecedented opportunities to create virtual replicas of biological systems, enabling real-time monitoring, predictive modelling, and personalised treatment strategies. AIM: This narrative review aims to critically examine the current applications of digital twin technology in IVF, evaluate its potential benefits and limitations, synthesize existing evidence into an integrative conceptual model, and identify future directions for implementation in reproductive medicine. METHOD: A comprehensive narrative review was conducted using PubMed, Scopus, Web of Science, and IEEE Xplore databases. A narrative review approach was selected over systematic review to accommodate the heterogeneity of evidence types in this emerging field, including theoretical frameworks, simulation studies, and proof-of-concept implementations that would be excluded from systematic reviews. Search terms included "digital twin," "IVF," "in vitro fertilisation," "assisted reproductive technology," "embryo selection," and "predictive modelling." Studies published between 2015 and 2025 were included, focusing on original research articles, systematic reviews, and proof-of-concept studies describing digital twin applications in reproductive medicine. RESULTS: Digital twin technology in IVF demonstrates significant potential across multiple domains including embryo development simulation, ovarian response prediction, endometrial receptivity modelling, and personalised stimulation protocols. Current applications integrate artificial intelligence, machine learning algorithms, time-lapse imaging, and omics data to create comprehensive virtual models. Early evidence suggests improvements in embryo selection accuracy, ovarian response prediction, and treatment protocol optimization, though large-scale randomized controlled trials remain limited. Implementation challenges include data integration complexity, computational requirements, regulatory considerations, and validation requirements. CONCLUSION: Digital twin technology represents a paradigm shift in IVF practice, offering personalised, predictive, and precision medicine approaches. This review synthesizes existing evidence to propose an integrative conceptual model for digital twin implementation across the IVF treatment spectrum, identifies critical knowledge gaps, and establishes research priorities to advance clinical translation. Despite current limitations, continued advancement promises improved success rates and patient outcomes.

Humans↗