Search PubMed⌕ Search

Biomedical subjects

M Cynthia Goh

Publications and source records attributed to M Cynthia Goh.

12 recordsLinked to original sources

Fibrous long spacing type collagen fibrils have a hierarchical internal structure.

Nanodissection of single fibrous long spacing (FLS) type collagen fibrils by atomic force microscopy (AFM) reveals hierarchical internal structure: Fibrillar subcomponents with diameters of approximately 10 to 20 nm were observed to be running parallel to the long axis of the fibril in which they are found. The fibrillar subcomponent displayed protrusions with characteristic approximately 270 nm periodicity, such that protrusions on neighboring subfibrils were aligned in register. Hence, the banding pattern of mature FLS-type collagen fibrils arises from the in-register alignment of these fibrillar subcomponents. This hierarchical organization observed in FLS-type collagen fibrils is different from that previously reported for native-type collagen fibrils, displaying no supercoiling at the level of organization observed.

Animals↗

Direct and real-time visualization of the disassembly of a single RecA-DNA-ATPgammaS complex using AFM imaging in fluid.

RecA disassembly from circular double-stranded DNA (dsDNA) was studied by atomic force microscopy (AFM) imaging in fluid on a single molecule scale. The RecA/DNA complex was formed in the presence of ATPgammaS, and the disassembly was then initiated by buffer exchange to rinse off ATPgammaS. Performing AFM imaging in fluid allowed direct and real-time visualization of the disassembly of RecA from dsDNA in solution. It was found that RecA disassembly commenced from multiple sites both in deionized water and in buffer; the areas where RecA dissociated showed the appearance of "gaps" in the filamentous structure. RecA further disassembled either through the already existing "gaps" or by generation of new gaps. The disassembly was slower in buffer than in deionized water, suggesting that ions also contribute to the stabilization of the complex. RecA hexamers and monomers were observed in deionized water and in buffer, respectively, during the disassembly process.

Adenosine Triphosphate↗

An enzyme-amplified diffraction-based immunoassay.

We have previously shown that a gold-conjugated secondary label can be used to reduce the limit of detection in a diffraction-based assay by more than 40-fold. We now show that by using a combination of a peroxidase-conjugated secondary label and a precipitating substrate the limit of detection in a diffraction-based assay can be reduced by more than 1000-fold. The response to secondary enhancement was linear for concentrations from 50 to 2000 pg/mL of antidigoxin.

Animals↗

DNA base pair resolution by single molecule force spectroscopy.

The forces that hold complementary strands of DNA together in a double helix, and the role of base mismatches in these, are examined by single molecule force spectroscopy using an atomic force microscope (AFM). These forces are important when considering the binding of proteins to DNA, since these proteins often mechanically stretch the DNA during their action. In AFM measurement of forces, there is an inherent instrumental limitation that makes it difficult to compare results from different experimental runs. This is circumvented by using an oligonucleotide microarray, which allowed a direct comparison of the forces between perfectly matched short oligonucleotides and those containing a single or double mismatch. Through this greatly increased sensitivity, the force contribution of a single AT base pair was derived. The results indicate that the contribution to forces from the stacking interactions is more important than that from hydrogen bonding.

Base Pair Mismatch↗

Direct observation of the assembly of RecA/DNA complexes by atomic force microscopy.

The formation of the RecA/DNA nucleofilament on nicked circular double stranded (ds) DNA in the presence of ATPgammaS was studied using the atomic force microscope (AFM) at nanometer resolution. The AFM allowed simultaneous observation of both dsDNA substrate and RecA protein-coated sections such that they are highly distinguishable. Using a time series of images, the complex formation was monitored. AFM imaging provided direct evidence that assembly of the nucleofilaments occurs via a nucleation and growth mechanism. The nucleation step is much slower than the growth phase, as demonstrated by the predominance of naked dsDNA at early and middle time points, followed by the rapid appearance of partially then fully formed complexes. Observation of the formation of nucleation sites without accompanying growth on unnicked dsDNA enabled an estimate of the nucleation rate, of 5 x 10(-5) RecA min(-1) bp(-1). The published model for the analysis of RecA assembly on dsDNA deduces a single kinetic parameter that prevents the separate determination of nucleation rate and growth rate. By directly measuring the nucleation rate with the AFM, this model is employed to determine a growth rate of 202 min(-1). These AFM results provide the first direct evidence of previous results on complex formation obtained only by indirect means.

Binding Sites↗

An interactive triple-helical collagen builder.

UNLABELLED: To facilitate the building of triple-helical polypeptide structures, we provide an interactive, platform-independent Tcl/Tk script. User specified amino acid sequences are parsed to obtain localized melting temperature estimates corresponding to helical propensity. These propensities may be graphically examined prior to their automated use in combination with two separate statistical parameter sets to build the complete polypeptide backbone and, if desired, predict side-chain terminal atom locations. AVAILABILITY: The Tcl/Tk Triple Helical collagen Building Script (THe BuScr) and full documentation is freely available under the terms of the GNU General Public License at www.pence.ca/~jrainey/ or www.chem.utoronto.ca/staff/MCG/.

Algorithms↗

A quantitative diffraction-based sandwich immunoassay.

It is shown that diffraction-based sensing can be enhanced for diagnostic purposes through the use of a secondary label. The limit of detection for anti-rabbit IgG was reduced more than 40-fold by using a gold-conjugated secondary antibody. The response to secondary antibody binding was linear for concentrations from 25 to 500 ng/ml of anti-rabbit IgG, suggesting that quantitative determinations can be readily done. Moreover, the binding of the secondary antibody was observed as soon as 1 min after its introduction to the surface-bound primary complex.

Animals↗

Investigating the ultrastructure of fibrous long spacing collagen by parallel atomic force and transmission electron microscopy.

The ultrastructure of fibrous long spacing (FLS) collagen fibrils has been investigated by performing both atomic force microscopy (AFM) and transmission electron microscopy (TEM) on exactly the same area of FLS collagen fibril samples. These FLS collagen fibrils were formed in vitro from type I collagen and alpha1-acid glycoprotein (AAG) solutions. On the basis of the correlated AFM and TEM images obtained before and after negative staining, the periodic dark bands observed in TEM images along the longitudinal axis of the FLS collagen fibril correspond directly to periodic protrusions seen by AFM. This observation is in agreement with the original surmise made by Gross, Highberger, and Schmitt (Gross J, Highberger JH, Schmitt FO, Proc Natl Acad Sci USA 1954;40:679-688) that the major repeating dark bands of FLS collagen fibrils observed under TEM are thick relative to the interband region. Although these results do not refute the idea of negative stain penetration into gap regions proposed by Hodge and Petruska (Petruska JA, Hodge AJ. Aspects of protein structure. Ramachandran GN, editor. New York: Academic Press; 1963. p. 289-300), there is no need to invoke the presence of gap regions to explain the periodic dark bands observed in TEM images of FLS collagen fibrils.

Animals↗

Diffraction-based assay for detecting multiple analytes.

The principles of diffraction are utilized to enable the simultaneous detection of multiple analytes in solution, forming the basis of a multi-analyte sensor. Probe molecules are immobilized on a substrate such that each type of molecule defines a specific pattern within the same region of substrate. The binding of a target molecule to its complementary probe is heralded by a characteristic diffraction image. This principle is demonstrated using antibody conjugates.

Animals↗

Hierarchical assembly and the onset of banding in fibrous long spacing collagen revealed by atomic force microscopy.

The mechanism of formation of fibrillar collagen with a banding periodicity much greater than the 67 nm of native collagen, i.e. the so-called fibrous long spacing (FLS) collagen, has been speculated upon, but has not been previously studied experimentally from a detailed structural perspective. In vitro, such fibrils, with banding periodicity of approximately 270 nm, may be produced by dialysis of an acidic solution of type I collagen and alpha(1)-acid glycoprotein against deionized water. FLS collagen assembly was investigated by visualization of assembly intermediates that were formed during the course of dialysis using atomic force microscopy. Below pH 4, thin, curly nonbanded fibrils were formed. When the dialysis solution reached approximately pH 4, thin, filamentous structures that showed protrusions spaced at approximately 270 nm were seen. As the pH increased, these protofibrils appeared to associate loosely into larger fibrils with clear approximately 270 nm banding which increased in diameter and compactness, such that by approximately pH 4.6, mature FLS collagen fibrils begin to be observed with increasing frequency. These results suggest that there are aspects of a stepwise process in the formation of FLS collagen, and that the banding pattern arises quite early and very specifically in this process. It is proposed that typical 4D-period staggered microfibril subunits assemble laterally with minimal stagger between adjacent fibrils. alpha(1)-Acid glycoprotein presumably promotes this otherwise abnormal lateral assembly over native-type self-assembly. Cocoon-like fibrils, which are hundreds of nanometers in diameter and 10-20 microm in length, were found to coexist with mature FLS fibrils.

Animals↗

A statistically derived parameterization for the collagen triple-helix.

The triple-helix is a unique secondary structural motif found primarily within the collagens. In collagen, it is a homo- or hetero-tripeptide with a repeating primary sequence of (Gly-X-Y)(n), displaying characteristic peptide backbone dihedral angles. Studies of bulk collagen fibrils indicate that the triple-helix must be a highly repetitive secondary structure, with very specific constraints. Primary sequence analysis shows that most collagen molecules are primarily triple-helical; however, no high-resolution structure of any entire protein is yet available. Given the drastic morphological differences in self-assembled collagen structures with subtle changes in assembly conditions, a detailed knowledge of the relative locations of charged and sterically bulky residues in collagen is desirable. Its repetitive primary sequence and highly conserved secondary structure make collagen, and the triple-helix in general, an ideal candidate for a general parameterization for prediction of residue locations and for the use of a helical wheel in the prediction of residue orientation. Herein, a statistical analysis of the currently available high-resolution X-ray crystal structures of model triple-helical peptides is performed to produce an experimentally based parameter set for predicting peptide backbone and C(beta) atom locations for the triple-helix. Unlike existing homology models, this allows easy prediction of an entire triple-helix structure based on all existing high-resolution triple-helix structures, rather than only on a single structure or on idealized parameters. Furthermore, regional differences based on the helical propensity of residues may be readily incorporated. The parameter set is validated in terms of the predicted bond lengths, backbone dihedral angles, and interchain hydrogen bonding.

Amino Acid Sequence↗

Statistically based reduced representation of amino acid side chains.

Preferred conformations of amino acid side chains have been well established through statistically obtained rotamer libraries. Typically, these provide bond torsion angles allowing a side chain to be traced atom by atom. In cases where it is desirable to reduce the complexity of a protein representation or prediction, fixing all side-chain atoms may prove unwieldy. Therefore, we introduce a general parametrization to allow positions of representative atoms (in the present study, these are terminal atoms) to be predicted directly given backbone atom coordinates. Using a large, culled data set of amino acid residues from high-resolution protein crystal structures, anywhere from 1 to 7 preferred conformations were observed for each terminal atom of the non-glycine residues. Side-chain length from the backbone C(alpha) is one of the parameters determined for each conformation, which should itself be useful. Prediction of terminal atoms was then carried out for a second, nonredundant set of protein structures to validate the data set. Using four simple probabilistic approaches, the Monte Carlo style prediction of terminal atom locations given only backbone coordinates produced an average root mean-square deviation (RMSD) of approximately 3 A from the experimentally determined terminal atom positions. With prediction using conditional probabilities based on the side-chain chi(1) rotamer, this average RMSD was improved to 1.74 A. The observed terminal atom conformations therefore provide reasonable and potentially highly accurate representations of side-chain conformation, offering a viable alternative to existing all-atom rotamers for any case where reduction in protein model complexity, or in the amount of data to be handled, is desired. One application of this representation with strong potential is the prediction of charge density in proteins. This would likely be especially valuable on protein surfaces, where side chains are much less likely to be fixed in single rotamers. Prediction of ensembles of structures provides a method to determine the probability density of charge and atom location; such a prediction is demonstrated graphically.

Amino Acids↗