Search PubMed⌕ Search

Biomedical subjects

David L Kaplan

Publications and source records attributed to David L Kaplan.

At least 55 records · Page 3Linked to original sources
PubMed2004

Lessons from seashells: silica mineralization via protein templating.

Silica, the most abundant compound in the earth's crust, is also widespread in biological systems. Silica has many functions, including support and protection in single-celled organisms and in higher plants and animals alike. Despite this widespread occurrence and importance of function, little is known about biosilica and the mechanisms that produce controlled microscopic and macroscopic silica structures with nanoscale precision, exceeding present synthetic technological approaches. Here we highlight recent progress in identifying proteins, genes and the various environmental factors responsible for the controlled synthesis of silica by marine organisms. Examples of biomimetic approaches to biosilica formation using model peptides to control the formation of structures through manipulation of the processing environment are discussed.

Animals↗
PubMed2004

Human bone marrow stromal cell responses on electrospun silk fibroin mats.

Fibers with nanoscale diameters provide benefits due to high surface area for biomaterial scaffolds. In this study electrospun silk fibroin-based fibers with average diameter 700+/-50 nm were prepared from aqueous regenerated silkworm silk solutions. Adhesion, spreading and proliferation of human bone marrow stromal cells (BMSCs) on these silk matrices was studied. Scanning electron microscopy (SEM) and MTT analyses demonstrated that the electrospun silk matrices supported BMSC attachment and proliferation over 14 days in culture similar to native silk fibroin (approximately 15 microm fiber diameter) matrices. The ability of electrospun silk matrices to support BMSC attachment, spreading and growth in vitro, combined with a biocompatibility and biodegradable properties of the silk protein matrix, suggest potential use of these biomaterial matrices as scaffolds for tissue engineering.

Adolescent↗
PubMed2004

Matrix metalloproteinases and their clinical applications in orthopaedics.

Imbalance in the expression of matrix metalloproteinases and their inhibitors contribute considerably to abnormal connective tissue degradation prevalent in various orthopaedic joint diseases such as rheumatoid arthritis and osteoarthritis. Matrix metalloproteinase expression has been detected in ligament, tendon, and cartilage tissues in the joint. They are known to contribute to the development, remodeling, and maintenance of healthy tissue through their ability to cleave a wide range of extracellular matrix substrates. Their role has been extended to cell growth, migration, differentiation, and apoptosis. In orthopaedics, their clinical applications constantly are being explored. The multiple steps in matrix metalloproteinase regulation offer potential targets for inhibition, useful in drug therapy. The correlation between matrix metalloproteinases and progression in joint erosion presents potential prognostic and diagnostic tools in rheumatoid arthritis. Matrix metalloproteinases also can be incorporated into scaffold design to control the degradation rate of engineered tissue constructs. This current review aims to summarize and emphasize the importance of matrix metalloproteinases and their natural inhibitors in the maturation of musculoskeletal tissue through matrix remodeling and, therefore, in the generation of a new clinical potential in orthopaedics.

Humans↗
PubMed2004

Tissue engineering of ligaments.

Tissue engineering is emerging as a significant clinical option to address tissue and organ failure by implanting biological substitutes for the compromised tissues. As compared to the transplantation of cells alone, engineered tissues offer the potential advantage of immediate functionality. Engineered tissues can also serve as physiologically relevant models for controlled studies of cells and tissues designed to distinguish the effects of specific signals from the complex milieu of factors present in vivo. A high number of ligament failures and the lack of adequate options to fully restore joint functions have prompted the need to develop new tissue engineering strategies. We discuss the requirements for ligament reconstruction, the available treatment options and their limitations, and then focus on the tissue engineering of ligaments. One representative tissue engineering system involving the integrated use of adult human stem cells, custom-designed scaffolds, and advanced bioreactors with dynamic loading is described.

Animals↗
PubMed2003

Human bone marrow stromal cell and ligament fibroblast responses on RGD-modified silk fibers.

Adhesion, spreading, proliferation, and collagen matrix production of human bone marrow stromal cells (BMSCs) on an RGD-modified silk matrix was studied. Anterior cruciate ligament fibroblasts (ACLFs) were used as a control cell source. Scanning electron microscopy (SEM) and MTT analyses demonstrated that the modified silk matrices support improved BMSC and ACLF attachment and show higher cell density over 14 days in culture when compared with the non-RGD-modified matrices. Collagen type I transcript levels (at day 7) and content (at day 14) was significantly higher on the RGD-modified substrate than on the nonmodified group. The ability of RGD-coupled silk matrices to support BMSC attachment, which leads to higher cell density and collagen matrix production in vitro, combined with mechanical, fatigue, and biocompatibility properties of the silk protein matrix, suggest potential for use of this biomaterial for tissue engineering.

Animals↗
PubMed2003

Mechanistic limitations in the synthesis of polyesters by lipase-catalyzed ring-opening polymerization.

Lipase-catalyzed polymerization of caprolactone (CL) in toluene with methoxy-poly(ethylene glycol) (MPEG) and water as initiators was characterized in detail for mechanistic insight. (1)H NMR analysis of polycaprolactone chains (PCL), dicaprolactone, degree of esterification of MPEG, and fractions of PCL chains initiated by MPEG and water were used to follow the reactions. The data were analyzed with the kinetic scheme involving formation of the acylenzyme and its consequent reaction with MPEG, water, or PCL to yield the MPEG- or water-initiated PCL chains, or increase in PCL length. A limit for MPEG initiator esterification in lipase-catalyzed CL polymerization was observed and was explained by preferential reaction of PCL propagation over MPEG esterification at long reaction times and low MPEG concentrations. Slower monomer conversion in concentrated monomer solutions was explained by decreased partitioning of PCL between the solvent and the enzyme. This effect resulted in inhibition of the lipase by the reaction product, PCL chains, and/or insufficient diffusion of monomer to the enzyme active site. High monomer/initiators ratio in these solutions did not yield longer polymer chains due to decreased monomer conversion and the corresponding decrease in product yields; lower yields were also observed for chain initiation by MPEG and water. A shift in the reaction rate-limiting step from formation of acylenzyme in dilute CL solutions to its deacylation in concentrated CL solutions yielded higher PCL polydispersity due to increased initiation by water. Enhanced intramolecular cyclization was also observed. Endgroup composition of PCL chains was influenced by the concentration of monomer, ratio of initiators (MPEG and water), and reaction time, yielding PCL chains initiated exclusively by MPEG at "infinite reaction times."

Caproates↗
PubMed2003

Cloning, expression, and assembly of sericin-like protein.

Recombinant sericin proteins of different molecular masses (17.4, 31.9, and 46.5 kDa), based on the 38-amino acid repetitive motif of native sericin, were cloned, expressed, and purified. The recombinant sericin self-assembled during dialysis (starting concentration of 2.5 mg/ml) forming twisted fibers. Circular dichroism and Fourier transform infrared spectroscopy studies demonstrated protein conformational transitions occurred from random coil to beta-sheets during the dialysis. Congo red-stained recombinant sericin fibrils exhibited apple-green birefringence, indicating long-range order in the array of beta-sheets. Biosynthetic sericin has a high content of polar amino acids (e.g. > 40 mol % serine), leading to a beta-sheet conformation formed by hydrogen bonding via polar zipper interactions. Analysis of recombinant sericin sequence using Mandel-Gutfreund's (Mandel-Gutfreund, Y., and Gregoret, L. M. (2002) J. Mol. Biol. 323, 453-461) definition of polar and non-polar amino acids showed that the hydrophobicity pattern resembles the most frequent pattern of amyloidogenic proteins, polar amino acid aggregates (PPPPP). Many beta-proteins and peptides are designed to study amyloidogenesis using a polar/non-polar alternating pattern (PNPNPN). Sericin-like proteins or peptides provide an alternative model in terms of hydrophobicity pattern with which to explore questions related to beta-sheet formation and amyloidogenesis. The glue-like property of sericin is attributed to the hydrogen bonding between serine residues of sericin with serine residues in the fibroin structural components of silk fiber.

Amino Acid Motifs↗
PubMed2003

Mechanism of silk processing in insects and spiders.

Silk spinning by insects and spiders leads to the formation of fibres that exhibit high strength and toughness. The lack of understanding of the protein processing in silk glands has prevented the recapitulation of these properties in vitro from reconstituted or genetically engineered silks. Here we report the identification of emulsion formation and micellar structures from aqueous solutions of reconstituted silkworm silk fibroin as a first step in the process to control water and protein-protein interactions. The sizes (100-200 nm diameter) of these structures could be predicted from hydrophobicity plots of silk protein primary sequence. These micelles subsequently aggregated into larger 'globules' and gel-like states as the concentration of silk fibroin increased, while maintaining solubility owing to the hydrophilic regions of the protein interspersed among the larger hydrophobic regions. Upon physical shearing or stretching structural transitions, increased birefringence and morphological alignment were demonstrated, indicating that this process mimics the behaviour of similar native silk proteins in vivo. Final morphological features of these silk materials are similar to those observed in native silkworm fibres.

Animals↗
PubMed2003

Supramolecular assembly of collagen triblock peptides.

The relationship between primary sequence and collagen triple-helix formation is relatively well characterized, while higher levels of structural assembly from these sequences is poorly understood. To address this gap, a new collagen-like triblock peptide design was used to study the relationship between amino acid sequence and supramolecular assembly. Four collagen-like peptides with the sequence (Glu)(5)(Gly-Xaa-Hyp-Gly-Pro-Hyp)(6)(Glu)(5) and corresponding to Xaa = alanine, proline, serine, or valine, and an analogous peptide without the glutamic acid end blocks, were solubilized in water at high concentrations (20-150 mg/mL) and analyzed in optical polarizing microscopy and transmission electron microscopy. Some of the peptides self-assembled into supramolecular structures, the nature of which was determined by the core collagen-like sequence. The globular end blocks appeared necessary for these short triple-helix-forming peptides to spontaneously organize into supramolecular structures in solution and also provided enhanced thermal stability based on CD analysis. The results indicate a strong dependence of the peptide triblock assembly behavior on the identity of the guest residue Xaa; nematic order when Xaa was valine, no organization when Xaa was serine, and banded spherulites displaying a cholesteric-like twist when Xaa was proline or alanine. According to these results, the identity of the amino acid in position Xaa of the triplet Gly-Xaa-Yaa dramatically determined the type of supramolecular assembly formed by short triple helices based on collagen-triblock like sequences. Moreover, the structural organization observed for these collagen-triblock peptides was analogous to some assemblies observed for native collagen in vivo and in vitro. The amino acid sequence in the native collagen proteins may therefore be a direct determinant of the different supramolecular architectures found in connective tissues.

Animals↗
PubMed2003

Silk-based biomaterials.

Silk from the silkworm, Bombyx mori, has been used as biomedical suture material for centuries. The unique mechanical properties of these fibers provided important clinical repair options for many applications. During the past 20 years, some biocompatibility problems have been reported for silkworm silk; however, contamination from residual sericin (glue-like proteins) was the likely cause. More recent studies with well-defined silkworm silk fibers and films suggest that the core silk fibroin fibers exhibit comparable biocompatibility in vitro and in vivo with other commonly used biomaterials such as polylactic acid and collagen. Furthermore, the unique mechanical properties of the silk fibers, the diversity of side chain chemistries for 'decoration' with growth and adhesion factors, and the ability to genetically tailor the protein provide additional rationale for the exploration of this family of fibrous proteins for biomaterial applications. For example, in designing scaffolds for tissue engineering these properties are particularly relevant and recent results with bone and ligament formation in vitro support the potential role for this biomaterial in future applications. To date, studies with silks to address biomaterial and matrix scaffold needs have focused on silkworm silk. With the diversity of silk-like fibrous proteins from spiders and insects, a range of native or bioengineered variants can be expected for application to a diverse set of clinical needs.

Animals↗
PubMed2003

Macrophage responses to silk.

Silk fibers have potential biomedical applications beyond their traditional use as sutures. The physical properties of silk fibers and films make it a promising candidate for tissue engineering scaffold applications, particularly where high mechanical loads or tensile forces are applied or in cases where low rates of degradation are desirable. A critical issue for biomaterial scaffolds is biocompatibility. The direct inflammatory potential of intact silk fibers as well as extracts was studied in an in vitro system. The results indicate that silk fibers are largely immunologically inert in short- and long-term culture with RAW 264.7 murine macrophage cells while insoluble fibroin particles induced significant TNF release. Soluble sericin proteins extracted from native silk fibers did not induce significant macrophage activation. While sericin did not activate macrophages by itself, it demonstrated a synergistic effect with bacterial lipopolysaccharide. The low level of inflammatory potential of silk fibers makes them promising candidates in future biomedical applications.

Animals↗
PubMed2002

Genetic engineering of fibrous proteins: spider dragline silk and collagen.

Various strategies have been employed to genetically engineer fibrous proteins. Two examples, the subject of this review, include spider dragline silk from Nephila clavipes and collagen. These proteins are highlighted because of their unique mechanical and biological properties related to controlled release, biomaterials and tissue engineering. Cloning and expression of native genes and synthetic artificial variants of the consensus sequence repeats from the native genes has been accomplished. Expression of recombinant silk and collagen proteins has been reported in a variety of host systems, including bacteria, yeast, insect cells, plants and mammalian cells. Future utility for these proteins for biomedical materials is expected to increase as needs expand for designer materials with tailored mechanical properties and biological interactions to elicit specific responses in vitro and in vivo.

Amino Acid Sequence↗
PubMed2002

Silk: molecular organization and control of assembly.

The interface between the science and engineering of biology and materials is an area of growing interest. One of the goals of this field is to utilize biological synthesis and processing of polymers as a route to gain insight into topics such as molecular recognition, self-assembly and the formation of materials with well-defined architectures. The biological processes involved in polymer synthesis and assembly can offer important information on fundamental interactions involved in the formation of complex material architectures, as well as practical knowledge into new and important materials related to biomaterial uses and tissue engineering needs. Classic approaches in biology, including genetic engineering, controlled microbial physiology and enzymatic synthesis, are prototypical methods used to control polymer structure and chemistry, including stereoselectivity and regioselectivity, to degrees unattainable using traditional synthetic chemistry. This type of control can lead to detailed and systematic studies of the formation of the structural hierarchy in materials and the subsequent biological responses to these materials.

Animals↗
PubMed2002

Future direction of the treatment of ACL ruptures.

The future of treatment of the ACL rupture is changing as our understanding of the biology surrounding the ACL continues to increase. It is our expectation that clinically applicable treatments, including the repair of the ACL and the development of a biologically engineered ACL, will occur in the next decade.

Animals↗
PubMed2002

Silk matrix for tissue engineered anterior cruciate ligaments.

A silk-fiber matrix was studied as a suitable material for tissue engineering anterior cruciate ligaments (ACL). The matrix was successfully designed to match the complex and demanding mechanical requirements of a native human ACL, including adequate fatigue performance. This protein matrix supported the attachment, expansion and differentiation of adult human progenitor bone marrow stromal cells based on scanning electron microscopy, DNA quantitation and the expression of collagen types I and III and tenascin-C markers. The results support the conclusion that properly prepared silkworm fiber matrices, aside from providing unique benefits in terms of mechanical properties as well as biocompatibility and slow degradability, can provide suitable biomaterial matrices for the support of adult stem cell differentiation toward ligament lineages. These results point toward this matrix as a new option for ACL repair to overcome current limitations with synthetic and other degradable materials.

Animals↗
PubMed2002

Pyogenic arthritis, pyoderma gangrenosum, and acne syndrome (PAPA syndrome) associated with hypogammaglobulinemia and elevated serum tumor necrosis factor-alpha levels.

Pyogenic aseptic arthritis, pyoderma gangrenosum, and cystic acne (PAPA) syndrome is an unusual triad that was recently mapped to a chromosome 15q mutation. We describe a patient from this kindred in whom hypogammaglobulinemia and elevated tumor necrosis factor-alpha serum levels were detected. The patient responded well to intravenous gammaglobulin and intra-articular corticosteroid therapy. Immune abnormalities can be found in PAPA syndrome and could be the consequence of the chromosomal abnormalities affecting candidate genes on this chromosome with subsequent abnormalities in cytokine or chemokine secretion. Rheumatologists should be alert for this syndrome. Correction of the immune abnormalities may be effective in controlling the disease manifestations.

Journal Article↗
PubMed2002

Advanced bioreactor with controlled application of multi-dimensional strain for tissue engineering.

Advanced bioreactors are essential for meeting the complex requirements of in vitro engineering functional skeletal tissues. To address this need, we have developed a computer controlled bench-top bioreactor system with capability to apply complex concurrent mechanical strains to three-dimensional matrices independently housed in 24 reactor vessels, in conjunction with enhanced environmental and fluidic control. We demonstrate the potential of this new system to address needs in tissue engineering, specifically toward the development of a tissue engineered anterior cruciate ligament from human bone-marrow stromal cells (hBMSC), where complex mechanical and biochemical environment control is essential to tissue function. Well-controlled mechanical strains (resolution of < 0.1 micron for translational and < 0.1 degree for rotational strain) and dissolved oxygen tension (between 0%-95% +/- 1%) could be applied to the developing tissue, while maintaining temperature at 37 +/- 0.2 degrees C about developing tissue over prolonged periods of operation. A total of 48 reactor vessels containing cell culture medium and silk fiber matrices were run for up to 21 days under 90 degrees rotational and 2 mm translational deformations at 0.0167 Hz with only one succumbing to contamination due to a leak at an medium outlet port. Twenty-four silk fiber matrices seeded with human bone marrow stromal cells (hBMSCs) housed within reactor vessels were maintained at constant temperature (37 +/- 0.2 degrees C), pH (7.4 +/- 0.02), and pO2 (20 +/- 0.5%) over 14 days in culture. The system supported cell spreading and growth on the silk fiber matrices based on SEM characterization, as well as the differentiation of the cells into ligament-like cells and tissue (Altman et al., 2001).

Biomimetics↗