Search PubMed⌕ Search

Biomedical subjects

David L Kaplan

Publications and source records attributed to David L Kaplan.

At least 37 records · Page 2Linked to original sources
PubMed2005

Peroxidase-catalyzed in situ polymerization of surface orientated caffeic acid.

Nanoscale surface patterning and polymerization of caffeic acid on 4-aminothiophenol-functionalized gold surfaces has been demonstrated with dip pen nanolithography (DPN). The diphenolic moiety of caffeic acid can be polymerized by biocatalysis with laccase or horseradish peroxidase. In the present study, the DPN patterned features were polymerized in situ through the use of the peroxidase. Using samples prepared by DPN, microcontact printing, and adsorption on macroscopic substrates, the products were characterized by electrostatic force microscopy (EFM), MALDI-TOF, X-ray photoelectron spectroscopy (XPS), UV-vis, and FT-IR. The in situ surface polymerization resulted in the formation of a quinone structure, while the phenyl ester formed in bulk polymerization reactions was not detected. A different coupling site was observed when comparing the polymers obtained from solution (bulk) vs the surface DPN reactions. The structural differences were attributed to surface-induced pre-organization and orientation of the monomers prior to the enzymatic polymerization step. The results of this study expand the application of DPN technology to surface modification and surface chemistry reactions wherein stereo-regularity and regioselectivity can be exploited.

Alloys↗
PubMed2005

Twenty-one millisecond pulsars in Terzan 5 using the Green Bank Telescope.

We have identified 21 millisecond pulsars (MSPs) in globular cluster Terzan 5 by using the Green Bank Telescope, bringing the total of known MSPs in Terzan 5 to 24. These discoveries confirm fundamental predictions of globular cluster and binary system evolution. Thirteen of the new MSPs are in binaries, of which two show eclipses and two have highly eccentric orbits. The relativistic periastron advance for the two eccentric systems indicates that at least one of these pulsars has a mass 1.68 times greater than the mass of the Sun at 95% confidence. Such large neutron star masses constrain the equation of state of matter at or beyond the nuclear equilibrium density.

Journal Article↗
PubMed2005

The inflammatory responses to silk films in vitro and in vivo.

Silks have a long history of biomedical use as sutures. Silk can be purified, chemically modified to attach RGD sequences and processed into highly porous scaffolds for tissue engineering. We report biocompatibility studies of silk films (with or without covalently bound RGD) that were seeded with bone-marrow derived mesenchymal stem cells (MSC) and (a) cultured in vitro with human MSC or (b) seeded with autologous rat MSC and implanted in vivo. Controls for in vitro studies included tissue culture plastic (TCP; negative control), TCP with lipopolysaccharide (LPS) in the cell culture medium (positive control), and collagen films; controls for in vivo studies included collagen, PLA and TCP. After 9 h of culture, the expression of the pro-inflammatory Interleukin 1 beta (IL-1beta) and inflammatory cyclooxygenase 2 (COX-2) in human MSC were comparable for silk, collagen and TCP. After 30 and 96 h, gene expression of IL-1beta and COX-2 in MSC returned to the baseline (pre-seeding) levels. These data were corroborated by measuring IL-1beta and prostaglandin E2 levels in culture medium. The rate of cell proliferation was higher on silk films than either on collagen or TCP. In vivo, films made of silk, collagen or PLA were seeded with rat MSCs, implanted intramuscularly in rats and harvested after 6 weeks. Histological and immunohistochemical evaluation of silk explants revealed the presence of circumferentially oriented fibroblasts, few blood vessels, macrophages at the implant-host interface, and the absence of giant cells. Inflammatory tissue reaction was more conspicuous around collagen films and even more around PLA films when compared to silk. These data suggest that (a) purified degradable silk is biocompatible and (b) the in vitro cell culture model (hMSC seeded and cultured on biomaterial films) gave inflammatory responses that were comparable to those observed in vivo.

Animals↗
PubMed2005

Three-dimensional aqueous-derived biomaterial scaffolds from silk fibroin.

A new all-aqueous process is described to form three-dimensional porous silk fibroin matrices with control of structural and morphological features. The result of this process are scaffolds with controllable porosity and pore sizes that fully degrade in the presence of proteases, unlike prior methods to generate silk-based biomaterials that required the use of organic solvent treatments to impart control of structure and stability in aqueous environments, with low rates of proteolytic hydrolysis. A mechanism is proposed for this novel process that imparts physical stability via hydrophobic interactions. Adjusting the concentration of silk fibroin in water, and the particle size of granular NaCl used in the process, leads to the control of morphological and functional properties of the scaffolds. The aqueous-derived scaffolds had highly homogeneous and interconnected pores with pore sizes ranging from 470 to 940 microm, depending on the mode of preparation. The scaffolds had porosities >90% and compressive strength and modulus up to 320 +/- 10 and 3330 +/- 500 KPa, respectively, when formed from 10% aqueous solutions of fibroin. The scaffolds fully degraded upon exposure to protease during 21 days, unlike the scaffolds prepared from organic solvent processing. These new silk-based three-dimensional matrices provide useful properties as biomaterial matrices due to the all-aqueous mode of preparation, control of pore size, connectivity of pores, degradability and useful mechanical features. Importantly, this process offers an entirely new window of materials properties when compared with traditional silk fibroin-based materials.

Absorbable Implants↗
PubMed2005

In vitro and in vivo evaluation of differentially demineralized cancellous bone scaffolds combined with human bone marrow stromal cells for tissue engineering.

Mineralized and partially or fully demineralized biomaterials derived from bovine bone matrix were evaluated for their ability to support human bone marrow stromal cell (BMSC) osteogenic differentiation in vitro and bone-forming capacity in vivo in order to assess their potential use in clinical tissue-engineering strategies. BMSCs were either seeded on bone-derived scaffolds and cocultured in direct cell-to-scaffold contact, allowing for the exposure of soluble and insoluble matrix-incorporated factors, or cocultured with the scaffold preparations in a transwell system, exposing them to soluble matrix-incorporated factors alone. Osteoblast-related markers, alkaline phosphatase (ALP) activity and bone sialoprotein (BSP) and osteopontin (OP) mRNA expression were evaluated in BMSCs following 14 days of cocultivation in both systems. The data demonstrate that BMSCs from some donors express significantly higher levels of all osteoblast-related markers following cocultivation in direct cell-to-scaffold contact with mineralized scaffolds in comparison to fully demineralized preparations, while BMSCs from other donors display no significant differences in response to various scaffold preparations. In contrast, BMSCs cocultured independently with soluble matrix-incorporated factors derived from each scaffold preparation displayed significantly lower levels of ALP activity and BSP mRNA expression in comparison to untreated controls, while no significant differences were observed in marker levels between cells cocultured similarly with different biomaterial preparations. In addition, BMSCs were seeded directly on mineralized and partially or fully demineralized biomaterials and implanted in subcutaneous sites of athymic mice for 8 weeks to evaluate their in vivo bone-forming capacity. The ex vivo incorporation of BMSCs into all bone-derived scaffold preparations substantially increased the mean extent and frequency of samples containing de novo bone formation over similar nonseeded controls, as determined by histological and histomorphometrical analysis. No statistically significant differences were observed in the extent or frequency of bone formation between various scaffold preparations seeded with BMSCs from different donors. These results demonstrate that the in vivo osteoinductivity of bone-derived scaffolds can be modulated by ex vivo incorporated BMSCs and the extent of scaffold demineralization plays a significant role in influencing in vitro osteogenic differentiation of BMSCs depending on the coculture system and BMSC donor.

Alkaline Phosphatase↗
PubMed2005

In vitro degradation of silk fibroin.

A significant need exists for long-term degradable biomaterials which can slowly and predictably transfer a load-bearing burden to developing biological tissue. In this study Bombyx mori silk fibroin yarns were incubated in 1mg/ml Protease XIV at 37 degrees C to create an in vitro model system of proteolytic degradation. Samples were harvested at designated time points up to 12 weeks and (1) prepared for scanning electron microscopy (SEM), (2) lyophilized and weighed, (3) mechanical properties determined using a servohydraulic Instron 8511, (4) dissolved and run on a SDS-PAGE gel, and (5) characterized with Fourier transform infrared spectroscopy. Control samples were incubated in phosphate-buffered saline. Fibroin was shown to proteolytically degrade with predictable rates of change in fibroin diameter, failure strength, cycles to failure, and mass. SEM indicated increasing fragmentation of individual fibroin filaments from protease-digested samples with time of exposure to the enzyme; particulate debris was present within 7 days of incubation. Gel electrophoresis indicated a decreasing amount of the silk 25 kDa light chain and a shift in the molecular weight of the heavy chain with increasing incubation time in protease. Results support that silk is a mechanically robust biomaterial with predictable long-term degradation characteristics.

Absorbable Implants↗
PubMed2005

Influence of macroporous protein scaffolds on bone tissue engineering from bone marrow stem cells.

The aim of this study was to investigate the effect of three-dimensional silk fibroin scaffold preparation methods (aqueous and solvent) on osteogenic responses by human bone marrow stem cells (hMSCs). Macroporous 3D protein scaffolds with similar sized pores of 900+/-50 microm were prepared either by an organic solvent process (hexafluoro-2-propanol, HFIP) or an aqueous process. hMSCs were expanded, seeded on the scaffolds, and cultured up to 28 days under static conditions in osteogenic media. hMSCs seeded onto the water-based silk scaffolds showed a significant increase in cell numbers (p<0.01) vs. the HFIP-prepared silk scaffolds. Significantly higher (p<0.01) alkaline phosphatase (ALPase) activity and calcium deposition were apparent after 28 days of culture in the water-based silk scaffolds when compared to the HFIP-derived silk scaffolds. Transcript levels for collagen type I (Col I), ALP, and osteopontin (OP) increased (p<0.05) in the water-based silk scaffolds in comparison to the HFIP-derived materials. At early stages of culture, increased expression of OP and collagen type II (Col II) were also observed in both scaffolds. Expression of Col II, MMP 13, Col I, and OP proteins increased in the water-based silk scaffolds in comparison to the HFIP-derived scaffolds while bone sialoprotein (BSP) proteins increased in the HFIP-derived silk scaffolds in comparison to the water-based scaffolds after 28 days of culture. Histological analysis showed the development of bone-like trabeculae with cuboid cells in an extracellular matrix (ECM) in the water-based silk scaffolds with more organization than in the HFIP-derived material after 28 days of culture. Alcian blue staining demonstrated the presence of proteoglycan in the ECM formed in the water-based scaffolds but not in the HFIP-prepared silk scaffolds. The results suggest that macroporous 3D aqueous-derived silk fibroin scaffolds provide improved bone-related outcomes in comparison to the HFIP-derived systems. These data illustrate the importance of materials processing on biological outcomes, as the same protein, silk fibroin, was used in both preparations.

Bone Substitutes↗
PubMed2005

Matrix-mediated retention of adipogenic differentiation potential by human adult bone marrow-derived mesenchymal stem cells during ex vivo expansion.

Recently, cell-based approaches utilizing adipogenic progenitor cells for fat tissue engineering have been developed and reported to have success in promoting in vivo adipogenesis and the repair of defect sites. For autologous applications, human bone marrow-derived mesenchymal stem cells (MSCs) have been suggested as a potential cell source for adipose tissue engineering applications due to their ability to be isolated and ex vivo expanded from adult bone marrow aspirates and their versatility for pluripotent differentiation into various mesenchymal lineages including adipogenic. Due to the relatively low frequency of MSCs present within bone marrow, extensive ex vivo expansion of these cells is necessary to obtain therapeutic cell populations for tissue engineering strategies. Currently, utilization of MSCs for adipose tissue engineering is limited due to the attenuation of their adipogenic differentiation potential following extensive ex vivo expansion on conventional tissue culture plastic (TCP) substrates. In the present study, the ability of a denatured collagen type I (DC) matrix to preserve MSC adipogenic potential during ex vivo expansion was examined. Adipocyte-related markers and functions were examined in vitro in response to adipogenic culture conditions for 21 days in comparison to early passage MSCs and late passage MSCs ex vivo expanded on TCP. The results demonstrated significant preservation of the ability of late passage MSCs ex vivo expanded on the DC matrix to express adipogenic markers (fatty acid-binding protein-4, lipoprotein lipase, acyl-CoA synthetase, adipsin, facilitative glucose transporter-4, and accumulation of lipids) similar to the early passage cells and in contrast to late passage MSCs expanded on TCP. The ability of the DC matrix to preserve adipocyte-related markers and functions of MSCs following extensive ex vivo expansion represents a novel culture technique to expand functional adipogenic progenitors for tissue engineering applications.

Adipocytes↗
PubMed2005

In vitro cartilage tissue engineering with 3D porous aqueous-derived silk scaffolds and mesenchymal stem cells.

Adult cartilage tissue has limited self-repair capacity, especially in the case of severe damages caused by developmental abnormalities, trauma, or aging-related degeneration like osteoarthritis. Adult mesenchymal stem cells (MSCs) have the potential to differentiate into cells of different lineages including bone, cartilage, and fat. In vitro cartilage tissue engineering using autologous MSCs and three-dimensional (3-D) porous scaffolds has the potential for the successful repair of severe cartilage damage. Ideally, scaffolds designed for cartilage tissue engineering should have optimal structural and mechanical properties, excellent biocompatibility, controlled degradation rate, and good handling characteristics. In the present work, a novel, highly porous silk scaffold was developed by an aqueous process according to these criteria and subsequently combined with MSCs for in vitro cartilage tissue engineering. Chondrogenesis of MSCs in the silk scaffold was evident by real-time RT-PCR analysis for cartilage-specific ECM gene markers, histological and immunohistochemical evaluations of cartilage-specific ECM components. Dexamethasone and TGF-beta3 were essential for the survival, proliferation and chondrogenesis of MSCs in the silk scaffolds. The attachment, proliferation, and differentiation of MSCs in the silk scaffold showed unique characteristics. After 3 weeks of cultivation, the spatial cell arrangement and the collagen type-II distribution in the MSCs-silk scaffold constructs resembles those in native articular cartilage tissue, suggesting promise for these novel 3-D degradable silk-based scaffolds in MSC-based cartilage repair. Further in vivo evaluation is necessary to fully recognize the clinical relevance of these observations.

Adult↗
PubMed2005

Growth factor induced fibroblast differentiation from human bone marrow stromal cells in vitro.

Utilizing a two-dimensional tissue culture plastic screening system and a fractional factorial design, specific media formulations and growth factor combinations were determined that support human bone marrow stromal cell (BMSC) differentiation toward fibroblast characteristics for utilization in tissue engineering, specifically cell morphology and alignment, metabolic activity, abundant expression of collagen types I and III, and negligible expression of other tissue-specific markers. BMSCs were cultured for up to 14 days on tissue culture plastic, supplemented with Dulbecco's Minimal Essential Medium (DMEM)/10% FBS or Advanced DMEM(ADMEM)/5% FBS. Each medium base was supplemented with one of nine possible growth factor combinations and ascorbate-2-phosphate (Asc-2-P) for the duration of culture. ADMEM supported comparable cell viability with half the serum content of the DMEM formulation. Asc-2-P was potent in promoting BMSC proliferation, in the absence of a mitogen, supporting significant increases in cell activity over 14 days of culture. DMEM promoted significant increases in cell viability for 7 of 9 growth factor groups when compared to their ADMEM counterparts. ADMEM, however, promoted increased cell transcript and protein expression, as 5 of 9 growth factor combinations induced a 200% increase in collagen type I versus equivalent DMEM cultures. Cell morphology and collagen type I immunostaining, when assessed in context of MTT and RNA results, identified 3 growth factor and medium combinations that supported fibroblast differentiation for future development of ligament tissue in vitro.

Bone Marrow Cells↗
PubMed2005

Characterization of transcript levels for matrix molecules and proteases in ruptured human anterior cruciate ligaments.

An improved understanding of cellular responses during normal anterior cruciate ligament (ACL) function or repair is essential for clinical assessments, understanding ligament biology, and the implementation of tissue engineering strategies. The present study utilized quantitative real-time RT-PCR combined with univariate and multivariate statistical analyses to establish a quantitative database of marker transcript expression that can provide a "blueprint" of ACL wound healing. Selected markers (collagen types I and III, biglycan, decorin, MMP-1, MMP-2, MMP-9, and TIMP-1) were assessed from 33 torn ACLs harvested during reconstructive surgery. Trends were observed between postinjury period and marker expressions. Significant correlations between marker expression existed and were most prominent between collagen types I and III. Canonical correlation analysis established a relationship between patient demographics and a combination of all marker expressions. The currently observed trends and correlations may assist in identifying appropriate tissue samples and provide a baseline information of marker expression level that can support in vitro optimization of environmental cues for ligament tissue engineering application.

Adolescent↗
PubMed2004

Emulsan quantitation by Nile red quenching fluorescence assay.

A Nile red fluorescent technique to quantify 20-200 microg ml(-1) of emulsan was developed. Nile red dissolved in DMSO showed an adsorption peak at 552 nm, and emission peak at 636 nm, with molar extinction coefficient of 19,600 cm(-1) M(-1). Nile red fluorescence in DMSO was proportionally quenched by emulsan and the quenching was time-dependent. The assay was used to follow the production of emulsan by cultures of Acinetobacter venetianus RAG-1.

Acinetobacter↗
PubMed2004

Engineering bone-like tissue in vitro using human bone marrow stem cells and silk scaffolds.

Porous biodegradable silk scaffolds and human bone marrow derived mesenchymal stem cells (hMSCs) were used to engineer bone-like tissue in vitro. Two different scaffolds with the same microstructure were studied: collagen (to assess the effects of fast degradation) and silk with covalently bound RGD sequences (to assess the effects of enhanced cell attachment and slow degradation). The hMSCs were isolated, expanded in culture, characterized with respect to the expression of surface markers and ability for chondrogenic and osteogenic differentiation, seeded on scaffolds, and cultured for up to 4 weeks. Histological analysis and microcomputer tomography showed the development of up to 1.2-mm-long interconnected and organized bonelike trabeculae with cuboid cells on the silk-RGD scaffolds, features still present but to a lesser extent on silk scaffolds and absent on the collagen scaffolds. The X-ray diffraction pattern of the deposited bone corresponded to hydroxyapatite present in the native bone. Biochemical analysis showed increased mineralization on silk-RGD scaffolds compared with either silk or collagen scaffolds after 4 weeks. Expression of bone sialoprotein, osteopontin, and bone morphogenetic protein 2 was significantly higher for hMSCs cultured in osteogenic than control medium both after 2 and 4 weeks in culture. The results suggest that RGD-silk scaffolds are particularly suitable for autologous bone tissue engineering, presumably because of their stable macroporous structure, tailorable mechanical properties matching those of native bone, and slow degradation.

Absorbable Implants↗
PubMed2004

Impact of collagen structure on matrix trafficking by human fibroblasts.

Biodegradation of collagen biomaterial matrices and the deposition of new collagen extracellular matrix (ECM) are critical to the integration of in vitro bioengineered materials and tissues in vivo. In previous studies, we observed significant impact of collagen matrix structure on primary lung fibroblast behavior in vitro. In the present work, to begin to understand the mechanistic basis for our previous observation, the response of human fibroblasts (IMR-90) to the structural state of collagen matrices was studied with respect to cell proliferation, cell morphology, beta-galactosidase level, and transcript content for collagen (Col-1), matrix metalloproteinases (MMP-1, MMP-2), tissue inhibitors of matrix metalloproteinase (TIMP-1 and TIMP-2). Collagen digestion was assessed quantitatively by uptake of collagen-coated fluorescent beads incorporated in the preformed collagen matrix. Transcript levels related to the deposition of new ECM proteins varied as a function of the structure of the collagen matrix presented to the cells. Col-1 expression was 2-fold higher and expression for MMP-1, MMP-2, TIMP-1, and TIMP-2 increased for cells when grown on 156 microg/cm2 denatured collagen compared with cells grown on tissue culture (TC) plastic. On 156 microg/cm2 nondenatured (native) collagen, Col-1 expression was decreased by half and MMP-2 was increased by 2.5-fold compared with cells grown on TC plastic. On 78 microg/cm2 denatured collagen, Col-1 expression was 80% whereas the MMPs and TIMPs were increased by 1.25- to 2-fold compared with cells grown on TC plastic. On 78 microg/cm2 nondenatured collagen expression of all 5 transcripts was reduced 60-90% of the levels determined for the cells grown on TC plastic. Cell viability, based on cell morphology and beta-galactosidase activity, was improved on the denatured collagen. A higher level of collagen matrix incorporation was observed for cells grown on denatured collagen than on nondenatured collagen or TC plastic. These data suggest that tissue engineering matrices incorporating denatured collagen may promote more active remodeling toward new ECM in comparison to cells grown on nondenatured collagen or cells grown on TC plastic.

Animals↗
PubMed2004

Mapping domain structures in silks from insects and spiders related to protein assembly.

The exceptional solubility in vivo (20-30%, w/v) of the silk proteins of insects and spiders is dictated by both the need to produce solid fibres with a high packing fraction and the high mesogen concentration required for lyotropic liquid crystalline spinning. A further design requirement for silk proteins is a strong predominance of hydrophobic amino acid residues to provide for the hydrophobic interactions, water exclusion, and beta-crystallite formation required to produce strong insoluble threads. Thus, the domain structure of silk proteins needs to enable nanoscale phase separation to achieve high solubility of hydrophobic proteins in aqueous solutions. Additionally, silk proteins need to avoid premature precipitation as beta-sheets during storage and processing. Here we use mapping of domain types, sizes and distributions in silks to identify consistent design features that have evolved to meet these requirements. We show that silk proteins consist of conspicuously hydrophilic terminal domains flanking a very long central portion constructed from hydrophobic blocks separated by hydrophilic ones, discussing the domain structure in detail. The general rules of construction for silk proteins based on our observations should give a useful guide to the way in which Nature has solved the problem of processing hydrophobic proteins in water and how this can be copied industrially. Following these rules may also help in obtaining adequate expression, soluble products and controllable conformational switches in the production of genetically engineered or chemically synthesized silk analogues. Thus these insights have implications for structural biology and relevance to fundamental and applied questions in material science and engineering.

Animals↗
PubMed2004

Matrix-mediated retention of osteogenic differentiation potential by human adult bone marrow stromal cells during ex vivo expansion.

During prolonged cultivation ex vivo, adult bone marrow stromal stem cells (BMSCs) undergo two probably interdependent processes, replicative aging and a decline in differentiation potential. Recently, our results with primary human fibroblasts indicated that growth on denatured collagen (DC) matrix results in the reduction of the rate of cellular aging. The present study has been undertaken to test whether the growth of human BMSCs under the same conditions would translate into preservation of cellular aging-attenuated functions, such as the ability to express HSP70 in response to stress as well as of osteogenic differentiation potential. We report here that growth of BMSCs on a DC matrix versus tissue culture polystyrene significantly reduced one of the main manifestations of cellular aging, the attenuation of the ability to express a major protective stress response component, HSP70, increased the proliferation capacity of ex vivo expanded BMSCs, reduced the rate of morphological changes, and resulted in a dramatic increase in the retention of the potential to express osteogenic-specific functions and markers upon treatment with osteogenic stimulants. BMSCs are a promising and increasingly important cell source for tissue engineering as well as cell and gene therapeutic strategies. For use of BMSCs in these applications, ex vivo expansion is necessary to obtain a sufficient, therapeutically useful, number of cells; however, this results in the loss of differentiation potential. This problem is especially acute in older patients where more extensive in vitro expansion of smaller number of stem/progenitor cells is needed. The finding that growth on certain biomaterials preserves aging-attenuated functions, enhances proliferation capacity, and maintains differentiation potential of BMSCs indicates a promising approach to address this problem.

Adult↗
PubMed2004

Production of high molecular weight pullulan by Aureobasidium pullulans HP-2001 with soybean pomace as a nitrogen source.

The production of pullulan by Aureobasidium pullulans HP-2001 was enhanced by yeast extract as a nitrogen source as well as soybean pomace. The highest production of pullulan by A. pullulans HP-2001 with yeast extract was 5.5 g/l whereas that of pullulan with soybean pomace was 7.5 g/l. The gas chromatogram of pullulan produced by A. pullulans HP-2001 with soybean pomace as a nitrogen source showed that the major and minor components were glucose and mannose. The FTIR spectra of pullulans produced with yeast extract, a mixture of yeast extract and soybean pomace, and soybean pomace alone exhibited similar features. The increase in content of reducing sugars after pullulanase treatment of pullulans produced with different nitrogen sources indicated that all the pullulans had alpha-(1,6) glucosidic linkages of alpha-(1,4) linked maltotriose units. The average molecular weights of pullulans produced with various concentrations of yeast extract and soybean pomace ranged from 0.17 to 1.32x10(6) and from 1.32 to 5.66x10(6), respectively. All pullulans produced by A. pullulans HP-2001 in this study had the same basic structures, but their ratios of monomeric components were a little different, which might result in the production of pullulans with different molecular weights.

Ascomycota↗