SEARCH · Search PubMed

Results for “Atmospheric particles”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

28 recordsLinked to original sources

PubMed2026

In situ product monitoring in heterogeneous reaction of gaseous trimethylamine on Fe2O3/Fe(NO3)3: Effect of environmental factor and particle property.

Gas-particle reactions represent an important atmospheric heterogeneous transformation process for organic amines (OAs). Environmental factors and particle properties may impact the gas-particle reaction products. Although the products from gas-particle reactions can be monitored by various in situ techniques, related data remain scarce. Here, the interfacial and gaseous products from the reaction of trimethylamine on Fe2O3/Fe(NO3)3 particles under light irradiation with mixed NO2, O2, SO2 and H2O were monitored using in-situ diffuse reflectance Fourier transform infrared spectroscopy and proton transfer reaction time-of-flight mass spectrometry. Dark reaction of gaseous trimethylamine on Fe2O3/Fe(NO3)3 generated two interfacial products types: N-containing ones (CH3NCH2, CH3NO2, (CH3)2NCHO, and CH3N(OH)CHO) and N-free ones (alcohols, aldehydes and acids), both accumulating with reaction progression. Light irradiation and O2 oxidation enhanced formation of these products, while NO2 promoted the production of CH3NO2 and (CH3)2NCHO. H2O and SO2 occupied the active sites of particles to inhibit the formation of all products. Compared to Fe(NO3)3, Fe2O3 showed absolute dominance in contribution to the formation of products. Considering the smaller particle size of Fe2O3 and excess Fe(NO3)3, the physical mixing of them reduced the generation of interfacial products. Furthermore, gaseous products of CH3OH, HCHO, CH3CHO, HCOOH and CH3COOH detection clarified the N-free interfacial products. The presence of Fe(NO3)3 inhibited the formation of HCOOH and favored the formation of CH3CHO in the gas phase. By combining product information with thermodynamic calculations, the heterogeneous reaction pathways of trimethylamine were tentatively proposed. These findings provide a guiding significance for the migration of OAs in real atmospheric environment.

Methylamines↗

PubMed2026

Marine air promotes structural compaction and coating growth of soot aerosols after long-range transport from East Asia.

Soot aerosol, a key global warming contributor, undergoes morphological and chemical transformations during atmospheric transport, particularly in humidified marine environments. This study investigates morphology, mixing state, and aging mechanisms of soot particles collected in the Bohai Sea and Yellow Sea. Transmission electron microscopy analyses reveal that coated soot particles dominate the marine atmosphere, accounting for over 98 % of soot-containing particles, with a mean mixing state index (χ) of 0.83. The fractal dimension (Df) of soot particles is 1.84 ± 0.05 in the Northern Yellow Sea, 1.90 ± 0.08 in the Bohai Sea, and 1.96 ± 0.07 in the Southern Yellow Sea, indicating structural compaction during long-range transport. Correspondingly, the average Dp/Dcore ratios (particle to core size ratio) are 5.3 in the Bohai Sea, 4.2 in the Northern Yellow Sea, and 3.9 in the Southern Yellow Sea. Notably, those ratios are higher in marine environments compared to those observed during continental regional transport from northern to southern China (3.54), suggesting enhanced coating growth in humid marine air. The results highlight the important role of marine atmospheres in accelerating soot aging, which in turn leads to significantly stronger light absorption compared to soot in continental air. Our results highlight the necessity of incorporating compact morphologies, uniform mixing states, and thick coatings into optical models for accurate radiative forcing simulations.

Aerosols↗

PubMed2026

Enhancement of secondary organic aerosol formation from isoprene photooxidation by ammonia.

Ammonia (NH3) can participate in atmospheric secondary organic aerosol (SOA) formation by reacting with organic acids and carbonyl compounds in particle phase, but its influence on the gas phase chemistry remains unclear. This study performed a series of smog chamber experiments to investigate the influence of NH3 on the formation of SOA from isoprene photooxidation by OH radicals. Both gas and particle phase products were measured with a series of state-of- art instruments including a nitrate ion chemical ionization mass spectrometer (nitrate-CIMS) and high-resolution time-of-flight aerosol mass spectrometer (HR-TOF-AMS). Our results showed that in the presence of NH3 SOA in the chamber significantly increased, along with an enhanced oxidation of isoprene. CIMS analysis further showed that NH3 in the chamber homogeneously reacts not only with gas-phase organic acids but also with gaseous low volatility oxygenated organic molecules (OOMs) to generate extremely low volatility and ultralow volatility NH3-OOMs clusters. Quantum chemical calculation showed that NH3 can spontaneously interact with OOMs to form NH3-OOMs clusters by forming hydrogen bonds with RCOOH, R-OOH, and R-OH. These clusters can promote new particles formation and particle growth through nucleation and condensation, directly enhancing the isoprene SOA production with a contribution of 78% to the enhanced SOA. Moreover, the formation of NH3-OOMs clusters also results in more isoprene consumed by OH radicals, indirectly increasing the SOA production with a contribution of 22 % to the enhanced SOA. Our work for the first time clarified a synergetic effect of NH3 on isoprene SOA formation, which should be accounted for by models.

Aerosols↗

PubMed2026

Thermal analysis techniques for microplastic mass quantification: Methodological challenges and standardization needs.

Microplastics (MPs, 1 μm-5 mm) and nanoplastics (NPs, <1 μm) are ubiquitous contaminants requiring standardized quantification methods. This systematic review evaluates thermal analysis techniques for mass-based MP detection, including pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS), thermogravimetry-MS (TGA-MS), thermal extraction desorption-GC-MS (TED-GC-MS), and differential scanning calorimetry (DSC). Database searches (Web of Science, from inception to December 1, 2025) following PRISMA guidelines identified studies across seven environmental matrices (water, soil/sediment, atmosphere, biota, human tissues). We identify critical standardization gaps: inconsistent marker ion selection, unvalidated conversion factors for tire and road wear particles (TRWPs), and the absence of certified reference materials for complex matrices. Py-GC-MS demonstrates versatility but suffers from lipid interference in biological samples; TED-GC-MS offers superior sensitivity (sample capacity ∼200× Py-GC-MS) but lacks real-time chromatographic monitoring. To advance data comparability, we propose: (i) harmonized ion selection hierarchies based on specificity-sensitivity balance, (ii) matrix-specific TRWP quantification protocols, and (iii) inter-laboratory validation using environmental reference materials. This review provides a methodological roadmap for standardizing thermal analysis in MP research.

Humans↗

PubMed2026

Biomass burning contributions to Mexico City's atmospheric CO2 estimated using a multi-isotope approach.

Fossil fuel combustion dominates anthropogenic emissions worldwide; however, special attention should be addressed to biomass burning, since it is an increasingly important contributor under warmer, drier fire-weather conditions exacerbated by climate change. These emissions could impact the atmospheric composition of heavily urbanized environments. To assess the influence of biomass burning, along with fossil fuels combustion and soil and plant respiration on Mexico City's atmospheric composition, we conducted a year-long (December 2023-December 2024) isotopic monitoring of atmospheric CO2, combining radiocarbon (Δ14C), CO2 stable isotopes (δ13C, δ18O), and CO/CO2 ratios. Once defined the isotopic signatures and the characteristic CO/CO2 that describe the sources, we performed Monte Carlo simulations under two tracer modalities (Δ14C + CO/CO2 and Δ14C + CO2 stable isotopes) for source apportionment. Results show that during the dry season, particularly in March-April, atmospheric Δ14C values approached and overlapped background levels despite Mexico City's fossil-fuel dominance, indicating enhanced non-fossil inputs. Moreover, backward HYSPLIT trajectories supported that these elevated Δ14C values coincided with regional wildfire activity. Monte Carlo results attributed up to ∼34 %-60 % of local CO2 to biomass burning in April, followed by March with contributions of ∼31 %-49 %. Since these biomass burning figures contrast with the official emissions inventory of Mexico City metropolitan area, which assigns <1 % of total CO2 emissions to biomass burning, this study could exhibit the emissions inventory underestimation of this source, and thus, the need to reassess and incorporate top-down isotopic constraints in fire-affected urban regions.

Mexico↗

PubMed2026

Variability and ozone formation potential of ambient non-methane hydrocarbons in a tropical semi-arid atmosphere of northwest India.

We present first-time measurements of twenty-six ambient non-methane hydrocarbons (NMHCs; C2-C8), including isoprene (C5H8), at a semi-arid site in northwest India (Ajmer; 26.45°N, 74.64°E), during January 2022-December 2023. Ambient samples were analyzed using a thermal desorption gas chromatography system equipped with dual flame ionization detectors. Daily total NMHC levels ranged from 6 ppbV to >100 ppbV. Most NMHCs, except isoprene, toluene, ethylbenzene, m-xylene and o-xylene, exhibited the highest levels in winter and the lowest in the monsoon. In contrast, others were highest in the pre-monsoon and toluene was highest during monsoon. These variations reflect the combined influence of emissions, chemistry and meteorology. Toluene and o-xylene were the dominant NMHCs (25 %-67 %). Correlation analyses indicated major contributions from liquefied petroleum gas (LPG) and vehicular emissions, with additional influence from urban and oil and natural gas activities. Compared with other Indian sites, NMHCs levels at Ajmer were 2-5 times lower than Ahmedabad and Udaipur and 10 times lower than Delhi. The total ozone formation potential was highest in the monsoon (about 175 ppbV) and lowest in the post-monsoon (about 55 ppbV), with dominance of o-xylene (24 %-33 %) and toluene (8 %-37 %). Propylene-equivalent concentrations were highest in the pre-monsoon (30.23 ppb C) and lowest in the post-monsoon (7.28 ppb C). Similarly, OH reactivity was highest in the pre-monsoon (19.58 s⁻¹) and lowest in the post-monsoon (4.71 s⁻¹), dominated by benzene and toluene. These findings emphasize the importance of NMHC chemistry in a climatically sensitive region and highlight the need for their continuous monitoring.

India↗

PubMed2026

Stable chloroform emissions in southeastern China: insights from recent observations.

Chloroform (CHCl3) is a short-lived ozone-depleting substance not currently regulated under the Montreal Protocol. Due to the unique meteorological conditions in East Asia, CHCl3 emitted in this region has a greater potential to reach the stratosphere and contribute to ozone depletion. As an essential component of national CHCl3 emissions, southeastern China has attracted increasing attention. However, long-term observational data in this region remain relatively scarce, with no updates since 2020. In this study, we continuously measured atmospheric CHCl3 concentrations at a remote monitoring station in southeastern China from 1 June 2023 to 31 May 2025. Frequent concentration enhancements were observed during the monitoring period, with mixing ratios ranging from 9.3 to 134.1 ppt and an average value of 36.8 ± 19.7 ppt. Back-trajectory analysis indicated that air masses associated with elevated CHCl3 levels primarily originated from coastal industrial provinces in eastern China. Using the Potential Source Contribution Function and Concentration Weighted Trajectory methods, we identified the Yangtze River Delta (Jiangsu, Anhui, and Zhejiang Provinces) and Jiangxi Province as dominant source regions. Emissions of CHCl3 in southeastern China were estimated using the Tracer Ratio Method to be approximately 30.1 ± 5.3 Gg/yr from 2023-06-01 to 2025-05-31, indicating overall stability relative to earlier estimates and no apparent upward trend. These findings provide updated insights into the current status of CHCl3 emissions in southeastern China and highlight the need for continued monitoring and emission assessment of CHCl3 in East Asia, given its unregulated status and implications for ozone layer recovery.

Air Pollutants↗

PubMed2026

Reducing state anxiety with alpha-frequency transcranial alternating current stimulation.

BACKGROUND: Anxiety reactivity to acute stress is a transdiagnostic vulnerability factor. We tested whether a single session of alpha-frequency transcranial alternating current stimulation (tACS) targeting the frontoparietal control network reduces stress-evoked state anxiety in healthy adults. METHODS: In a randomized, blinded, sham-controlled study, 42 participants (mean age 58.9 years) completed an acute stress task before and after stimulation. The task was an adapted moving-circles paradigm in which circle collisions triggered a brief aversive event (mild electric shock plus unpleasant noise and a white flash). Active stimulation consisted of 20 min of 10-Hz tACS (2.0 mA/channel; 30-s ramp up/down) delivered via electrodes at F3, P3, Cz, and T7 (0° phase at F3/P3; 180° at Cz/T7). Sham stimulation used the same montage and ramp periods but no sustained current. RESULTS: State anxiety showed a significant Time × Protocol interaction (F(1,35) = 4.22, p = .047): STAI-S decreased after active tACS (Δ = -3.16) but increased slightly after sham (Δ = +1.17). Perceived stress appraisal (SAAS) did not change. Resting-state alpha power at F3/P3 showed no reliable pre-post effects. During the task, left-frontal relative alpha differed by protocol and showed a trend toward larger increases following active tACS. Electrodermal and pupil indices changed across sessions in both groups, with no differential stimulation effects. CONCLUSIONS: A single alpha-tACS session produced a modest, selective reduction in stress-evoked state anxiety, supporting oscillatory neuromodulation as a scalable approach to dampen anxiety reactivity.

Humans↗

PubMed2026

Microplastic contamination in South Asian commercially important seafood: A comprehensive assessment of occurrence, source, and human health risk.

Seafood is a cornerstone of global food security and human nutrition, serving as the primary source of animal protein for more than one-fourth of the global population, with South Asia representing one of the world's fastest-growing seafood-consuming regions. However, escalating microplastic (MP) pollution in marine ecosystems poses an emerging threat to seafood safety and human health, yet a comprehensive regional assessment of MP contamination in South Asian seafood remains lacking. This study presents the first region-wide systematic synthesis of the literature on MP contamination in commercially important seafood across South Asia, integrating occurrence patterns, human exposure assessment, polymer-specific hazard evaluation, and bibliometric analysis to address this critical knowledge gap. The meta-analysis estimated an average microplastic exposure of 145 particles/person/day through seafood consumption in South Asia, with fish contributing the highest intake (121 particles/person/day). The detected polymers were classified into PHI hazard levels I-IV, with polyvinyl chloride (PVC), polyurethane (PU), and polyacrylamide (PAM) representing the highest hazard categories. The mean pollution load index (PLI) was 7.71 (Category I), with crustaceans exhibiting the highest contamination (PLI = 10.07). Polypropylene was the predominant polymer, whereas fragments and blue particles were the most frequently reported microplastic characteristics. These findings provide the first regional baseline for assessing microplastic contamination, polymer-associated hazards, and human exposure through seafood consumption in South Asia, underscoring the need for standardized monitoring and targeted mitigation strategies to safeguard seafood safety and public health.

Animals↗

PubMed2025

Effects of aerosol aging on composition and light-absorbance of nitrogen-containing organic compounds: Evidences from ultra-high-resolution mass spectrometry analysis.

Nitrogen-containing organic compounds (NOCs) are key components of particulate matter (PM), but their compositional evolution and light-absorbing properties during atmospheric aging remain poorly understood. In this study, ultra-high-performance liquid chromatography coupled with Orbitrap mass spectrometry was used to semi-quantitatively analyze 59 PM1 samples collected in Shanghai. NOCs accounted for 31 % and 64 % of the detected species in negative (ESI-) and positive (ESI+) ionization modes, respectively. Atmospheric aging significantly reduced the molecular diversity of polar organics, with both the number and mass concentration percentages of CHON- compounds showing significant negative correlations with aging degree. Van Krevelen analysis demonstrated a decrease in the number of carboxylic-rich alicyclic molecules and their CHON- contributions during the aging process (from 37.7 % in fresh samples to 21.2 % in aged samples). CHN+ compounds, a major NOCs group in ESI+ mode, also decreased with aging. Correlation analyses involving the Bep/(Bep+Bap) ratio, relative humidity, and mass absorption efficiency at 365 nm revealed a decline in light absorption capacity with aging, suggesting aqueous-phase oxidation as a dominant aging mechanism. CHON- and CHN+ compounds were identified as the principal light-absorbing constituents in PM1. This work provides new insights into the aging-induced transformations of NOCs in urban PM1, and their changing role in light absorption, highlighting the need for further investigation of the aging mechanisms of NOCs.

Aerosols↗

PubMed2026

Oxidative potential of fresh vs. O₃-aged PM2.5 across urban and rural sources in China.

Fine particulate matter (PM2.5) is a major health risk, yet its impacts are still largely assessed using mass concentration, which does not capture toxicity. Recently, oxidative potential (OP) has emerged as a more relevant metric, reflecting the ability of particles to generate reactive oxygen species. A current challenge, especially in China, is understanding how emission sources and ozone (O3) aging affect PM2.5 toxicity, given that O3 is an increasingly important pollutant there. A work by Ma and co-workers published in J. Environ. Sci. (doi.org/10.1016/j.jes.2024.04.023) addressed this by evaluating the OP of fresh and O3-aged PM2.5 from multiple sources in China using the dithiothreitol (DTT) assay. Biomass burning particles exhibited the highest OP, up to 35 times greater than suburban PM2.5, driven by water-soluble organics and transition metals. While O3 aging generally reduced OP, it also induced complex chemical transformations. These findings highlight that PM2.5 toxicity is dynamic and source-dependent, underscoring the need to move beyond mass-based air quality metrics.

Particulate Matter↗

PubMed2026

Climate and soil shape Daqu wheat quality and seed microbiome via rhizosphere taxa and microbial assembly.

The grain quality and seed microbiome of Daqu wheat are fundamental determinants of Daqu fermentation performance; however, the mechanisms by which cultivation environments influence these traits via rhizosphere microbial communities remain unclear. Bacterial and fungal communities across the bulk soil-rhizosphere-seed continuum of three wheat cultivars grown in four ecoregions were characterized using absolute quantitative amplicon sequencing. The rhizosphere microbiome was treated as a central intermediary, while the response variables were seed microbial diversity and grain-quality traits, including starch content, protein content, and grain hardness. Twelve physicochemical properties of soil and 11 climatic factors were integrated into a multidimensional association framework. Environmental conditions exerted stronger influences on both seed quality traits and microbial diversity than cultivar identity. Distinct regional signatures were also evident in rhizosphere microbiomes, with environmental gradients explaining community variation more effectively than geographic distance. Bacterial communities exhibited greater sensitivity to environmental fluctuations than fungi. Mantel analyses identified available nitrogen, precipitation, and atmospheric pressure as significant drivers of core rhizosphere taxa (P < 0.05). iCAMP revealed that stochastic processes predominantly governed rhizosphere bacterial assembly, whereas stochastic and deterministic mechanisms jointly shaped fungal assembly. Partial least squares path modeling further uncovered a rhizosphere-mediated environment-seed cascade, wherein sunlight intensity and duration, atmospheric pressure, and soil nitrogen directly or indirectly affected seed wet gluten content, grain hardness, and seed microbial diversity through their influences on rhizosphere microbiota. Rhizosphere bacterial diversity was negatively associated with seed bacterial diversity (path coefficient = -0.118, P < 0.05), indicating that rhizosphere communities may shape seed endophytic bacterial assemblages via environmental filtering and competitive interactions. Collectively, these findings elucidate how environments shape the quality and seed microbiomes of Daqu wheat, providing scientific guidance for optimal site selection and the standardized production of high-quality brewing wheat for industrial Baijiu.

Triticum↗

PubMed2026

Towards microplastic bioremediation: Fungal degradation of pristine and pretreated high-density polyethylene and polystyrene.

Microplastic (MP) contamination has become a significant ecological issue because of its enduring existence in the ecosystem and its possible negative impacts. Therefore, using degrading strategies to eliminate these stubborn polymers has been a subject of scientific research. However, the currently used degradation methods are relatively inefficient. Given the pervasiveness of High-Density Polyethylene (HDPE) and Polystyrene (PS) and their resistance to biodegradability, disposal strategies are critical and must be addressed. This manuscript examines the biodegradation of pristine and UV-treated HDPE and PS MPs by Aspergillus flavus species in minimal growth media over 70 days. The maximum weight loss observed at 70 days for pristine HDPE and PS in sole carbon source (SCS) media was (29.33 ± 0.28) % and (17.67 ± 0.35) %, respectively. Whereas, for UV-treated HDPE and PS MPs, the % weight reduction was (33 ± 0.21) % and (25 ± 0.19) %, respectively. UV-treated MPs exhibited greater weight reduction, as UV induced oxygenated functional groups enhance polymer susceptibility to enzymes, thereby promoting biodegradation. HDPE MPs typically show a higher proportion of particles in the lower size range compared to PS MPs. This assertion was based on the weight loss, particle size distribution, and SEM analysis. Furthermore, chemical changes were evaluated using Fourier transform Infrared Spectroscopy (FTIR) analysis, which also displayed chemical oxidation occurring during biodegradation. Liquid Chromatography-Mass Spectrometry (LC-MS) results indicate that UV pretreatment enhances biodegradability by promoting chain scission. These findings further suggest that this fungus's natural and ubiquitous occurrence in terrestrial and marine environments may actively contribute to MP biodegradation while requiring few nutrients.

Microplastics↗

PubMed2026

Optimization of a niosomal formulation for Quercetin delivery: Comparative effects on growth performance, antioxidant and immune responses, and disease resistance against Streptococcus iniae in rainbow trout (Oncorhynchus mykiss).

Quercetin (QUR) is a flavonoid with antibacterial and antioxidant properties that has been studied for its effects on fish health and the immune system. Due to the low bioavailability of QUR, the present study was primarily aimed at developing a niosomal formulation of QUR to enhance its bioavailability and therapeutic properties. The performance of niosomal QUR was then compared with that of its free form by evaluating their effects on the growth and immune system of rainbow trout, Oncorhynchus mykiss. For this purpose, an optimal QUR-containing niosome was formulated by testing different proportions of cholesterol, surfactant, and stabilizer, and the niosomes were then added to the fish diet. A QUR-free diet and a diet containing QUR-free niosomes (QFN) were considered control groups. Niosomes prepared at low hydrophilic-lipophilic balance (HLB) values showed higher QUR entrapment efficiency (QUR-EE%) (P < 0.01). An increase in the molar ratio of cholesterol to surfactant significantly reduced QUR-EE% (P < 0.05). A surfactant/cholesterol/stabilizer ratio of 1:1:0.1 increased QUR-EE% (P < 0.05). The particle size of the niosomes was also affected by HLB and the surfactant/cholesterol/stabilizer ratio. Low HLB values resulted in smaller particle sizes (P < 0.01). Furthermore, a surfactant/cholesterol/stabilizer ratio of 1:1:0.1 resulted in the smallest niosomal particle size (P < 0.05). The presence of diacetyl phosphate as the stabilizer in the formulation improved the niosomal zeta potential to -40.55 mV. The optimal niosomal formulation (HLB = 6.6; surfactant/cholesterol/stabilizer ratio of 1:1:0.1) remained stable at 2 °C over 10 days of storage, as the niosomal QUR content and size did not show significant changes during this period (P > 0.01). After preparation of the diets containing the optimal niosomal QUR, fish were fed the experimental diets for two months. QUR, in both niosomal and free forms, resulted in better growth performance than the QUR-free diets (P < 0.01). There were no significant differences in growth performance between the free and niosomal forms of QUR; however, 500 mg/kg QUR showed significantly better growth performance than 250 mg/kg QUR (P < 0.01). Although both the niosomal and free forms of QUR enhanced immune and antioxidant components in the fish, the effects of the niosomal form were more significant (P < 0.01). In addition, QUR in both free and niosomal forms reduced fish mortality after challenge with Streptococcus iniae. In conclusion, the results of this study suggest that the niosomal form of QUR has strong potential for improving the immune system of fish and increasing resistance to S. iniae infection.

Animals↗

PubMed2025

Tracking microplastic contamination across seasons in a freshwater reservoir: Evidence from surface water, sediments, and fishes.

Microplastics (MPs) are prevalent contaminants in aquatic environments, posing substantial ecological and health risks. These particles migrate within the different layers of aquatic bodies with time and affect the respective biota. Thus, to get an in-depth understanding of the particles, this current study investigated the seasonal distribution, morphological and chemical characteristics, along with potential ecological and human health impacts in the samples including surface water, sediment, and fish from a drinking water supplying reservoir in eastern India. Across three different seasons, pre-monsoon, monsoon, and post-monsoon samples were collected using optimized methods. Results revealed distinct seasonal trends: MP abundance in surface water peaked during the monsoon (mean: 1.15 MPs/L), while sediment showed the highest concentrations in the pre-monsoon (mean: 596 MPs/kg), indicating temporal accumulation dynamics influenced by runoff, hydrodynamics, and sedimentation. Fish gut analysis confirmed ingestion of MPs across five species, with concentrations ranging from 26 to 100 MPs/kg, depending on feeding habits. The most dominant MP type were fragments, followed by fibers, films, and beads. Polymer analysis via µFTIR identified polyethylene, polypropylene, and polyvinyl chloride as prevalent, with hazard assessments (i.e., Polymer Hazard Index (PHI)) indicating medium to very high ecological risks. Heavy metal association was more dominant in the MPs isolated from sediments than the waterborne MPs. Pollution Load Index (PLI) values were > 1 in most seasons, confirming contamination. Health risk analysis suggested potential exposure through both drinking water and fish consumption. This study emphasizes the need for seasonal monitoring, improved waste management, and mitigation strategies to address MP pollution in freshwater ecosystems.

Microplastics↗

PubMed2026

Integrated proteomic and acetylomic analyses reveal the metabolic reprogramming associated with increased tylosin-equivalent concentration in Streptomyces xinghaiensis sf106-B1.

Deciphering the metabolic basis of high-yield antibiotic production in Streptomyces is crucial for strain optimization. Atmospheric and room-temperature plasma (ARTP) mutagenesis of Streptomyces xinghaiensis sf106 generated a mutant with a 30% increase in tylosin-equivalent concentration (μg/mL). 4D-FastDIA quantitative proteomics identified 279 differentially abundant proteins enriched in the Type I polyketide synthase (PKS) pathway, with increased abundance of key macrolide-biosynthesis-related proteins. Lysine-acetylome profiling identified 1152 differentially abundant acetylation sites and revealed altered acetylation of enzymes involved in fatty acid metabolism and the tricarboxylic acid (TCA) cycle, suggesting adjustments in central metabolism associated with acyl-CoA precursor availability and energy generation. Integration of proteomic and acetylomic data suggests coordinated changes in protein abundance and lysine acetylation associated with the increased tylosin-equivalent concentration. These results highlight candidate nodes for rational metabolic engineering of S. xinghaiensis.

Streptomyces↗

PubMed2026

Extreme Temperature and Incident Diabetes Risk Among Middle-Aged and Older Adults in China: A National Longitudinal Cohort Study.

BACKGROUND AND AIMS: The metabolic consequences of extreme temperature exposure in nondiabetic populations remain poorly understood. This study aimed to examine associations between heatwave and coldwave exposure and incident diabetes mellitus (DM) and impaired glucose tolerance (IGT) in middle-aged and older Chinese adults. METHODS: A total of 1803 China Health and Retirement Longitudinal Study participants aged ≥45 years with normoglycemia at baseline were followed from Wave 1 (2011) to Wave 3 (2015). Eighteen extreme-temperature indicators were derived from city-level fifth-generation European Centre for Medium-Range Weather Forecasts atmospheric reanalysis data. Outcomes were classified according to American Diabetes Association criteria. Generalized linear mixed-effects models (GLMMs) were pooled across five imputed datasets, with Bonferroni correction for multiple comparisons (α = 0.0028) and sensitivity analysis adjusting for individual follow-up duration. RESULTS: All nine heatwave indicators showed odds ratios (ORs) < 1.0 for DM and IGT. HT9 (≥97.5th percentile, ≥4 consecutive days) was the sole Bonferroni-significant result: OR = 0.845 (95% confidence interval [CI]: 0.802-0.890). Coldwave indicators showed no consistent associations. Age significantly modified the HT9 effect (P-interaction = 0.004): adults aged 65-84 showed a stronger inverse association (OR = 0.616) than those aged < 65 (OR = 0.921). CONCLUSION: Prolonged heatwave exposure was consistently associated with reduced diabetes risk, with pronounced age heterogeneity. Replication in larger prospective studies is warranted.

Humans↗

PubMed2026

Applications of metal-organic frameworks in smart packaging for food freshness indication: a comprehensive review.

Smart packaging is extensively studied for its multifunctional capabilities in antimicrobial activity, preservation, and atmosphere modification. Recently emerged metal-organic frameworks (MOFs) freshness-indicating packaging becomes a key research direction in smart packaging owing to its distinctive functions and physicochemical properties. As multifunctional materials, the unique porous structure and tunable properties of MOFs provide a distinctive approach for developing food packaging applications dedicated to food freshness indication. Existing MOFs-based smart packaging still faces potential safety risks and technical challenges in practical applications, and there remains a lack of integrated discussion that combines synthesis strategies, packaging design, optimization, and safety assessment. This review elaborates on the application of MOFs in freshness-indicating smart packaging, focusing on diverse MOFs synthesis strategies, the formats of smart packaging, types of indicator signals, and qualitative/quantitative analytical methods. It also delves into the methodology concepts of MOFs-based smart packaging and evaluates MOFs safety in food packaging by addressing potential risks. Studies show that MOFs-based smart packaging achieves qualitative and semi-quantitative analysis of food freshness through multiple signal modalities such as visible color change, fluorescence, and photothermal effects. This review emphasizes that safe MOFs design is critically important and should comply with the overall migration limit of <10 mg/dm2 specified in Regulation (EC) No 1935/2004, lanthanide element limit of <0.05 mg/kg, and FDA threshold of 1.5 μg/person/day. Comprehensive safety assessment and intelligent sensing platforms will constitute pivotal directions for advancing MOFs-based smart packaging toward practical application.

Food Packaging↗