SEARCH · Search PubMed

Results for “Three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectroscopy”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

667 records · Page 4Linked to original sources

PubMed2026

A dual-dimensional CRISPR toolkit enables one-step high-efficiency multiplex genome editing in Komagataella phaffii.

Against the backdrop of green biomanufacturing, engineering methanol-utilizing Komagataella phaffii (K. phaffii) represents an effective strategy to expand the one carbon (C1) product profile and speed up the industrialization of C1-based bioeconomy. To address the technical challenges of low efficiency and cumbersome experimental procedures for multiplex gene editing and precise large-fragment integration during the reconstruction of complex metabolic pathways in K. phaffii, this study established a CRISPR toolkit - Efficient Multi-Gene Editing System 3.0 (EMGES 3.0) - which enabled one-step large-fragment integration coupled with multiplex gene knockout. EMGES 3.0 was constructed through the synergistic optimization of a repair-engineered chassis and an episomal CRISPR vector. For chassis engineering, five DNA repair modules: Δlig4 (DNA Ligase IV, non-homologous end joining end ligation), ppMRE11(The endogenous MRE11 gene from Pichia pastoris) overexpression (The Meiotic Recombination 11, DNA double-strand break end resection), Δrad9 (Radiation-Sensitive 9, DNA damage checkpoint regulation), Δmph1 (Mutator Phenotype Helicase 1, improvement of homologous recombinant strand extension), and PapRecT-PaSSB co-expression (stabilization of recombination intermediates) were integrated to generate the highly recombinogenic strain Y09. For vector engineering, cenARS was replaced by panARS and the endogenous promoter PGAP was employed to drive the double hammerhead ribozyme-single guide RNA-hepatitis delta virus ribozyme (double HH-sgRNA-HDV: dHgH)-mediated sgRNA expression, yielding the optimized vector Nov_pGAP_panARS_pLAT1_Cas9. These two features on K. phaffii together enhanced the EMGES 3.0 to a higher standard of transformation rate and editing efficiency. According to our results, EMGES 3.0 achieved dual-functional gene knockout efficiencies between 76.6% and 100%. For insertion of medium-long fragments (>4.5 kb), the efficiency achieved 93.3%. In addition, the one-step integration of ultra-long fragments (>16 kb) achieved 14.8%, which was reported for the first time. Furthermore, the efficiency of simultaneous long-fragment integration at three neutral loci reached 38.4% (>15 kb). We applied the system for one-step production of free fatty acids (FFAs, yield: 5.82 ∼ 7.30 mg/L/OD600) and resveratrol (yield: 1.14 ∼ 1.28 mg/L) using methanol as the sole carbon source. EMGES 3.0 provides a robust technical foundation for complex compounds biosynthesis and high-yield industrial strains, while also advancing K. phaffii as an industrial synthetic biology chassis for efficient C1 utilization.

CRISPR-Cas Systems↗

PubMed2026

Modelling peak microbial pollution events caused by combined sewer overflows in a source-to-sea system.

Predicting peak microbial pollution events in downstream coastal bathing waters caused by combined sewer overflows (CSOs) is essential for protecting public health. In urban areas, wastewater effluents, CSOs, and surface runoff can contribute to elevated microorganism loads to downstream waters. These pressures are likely to be intensified by growing population density and more frequent heavy rainfalls due to climate change. This study developed a process-based model to simulate Escherichia coli (E. coli) emissions, transport, and fate from the initial sources to coastal beaches. A three-year retrospective simulation (2017-2019) shows that E. coli concentrations in CSO discharges varied widely across the catchment (4.6 - 7.3 (log10 CFU 100 ml-1)). 99th percentile E. coli concentrations (4.0 (log10 CFU 100 ml-1)) at the inland water outlet were dominated by local CSO emissions, whereas 90th percentile E. coli concentrations (3.6 (log10 CFU 100 ml-1)) reflected cumulative upstream contributions from both CSO and effluent emissions. With the simulation accuracy of 89%, the model reliably reproduced the E. coli dynamics on the downstream beach and showed strong performance in representing peak concentrations based on Complementary Cumulative Distribution Function (CCDF) analysis. The process-based model enables quantitative tracking of source contributions and identification of pollution hotspots, providing support for mitigation measures. The study lays down a source-to-sea modelling framework for representing pollution transport across the aquatic continuum and provides a transferable tool for microbial pollution forecasting and climate adaptation planning.

Climate projection↗

PubMed2025

An integrated multiscale air quality modelling framework for industrial park pollution: Linking local emissions to regional transport.

Capturing the spatiotemporal distribution of pollutants in industrial parks remains challenging for regional air quality models because of their coarse resolution (3 km), resulting in uncertainties in local emission quantification. To address this, we developed the Integrated Multiscale Air Quality Modelling System for Industry (IAQMS-Industry), coupling the regional Nested Air Quality Prediction Modelling System (NAQPMS) with a city-scale chemical transport model. This framework integrates point-source locations and Gaussian plume dispersion to simulate particulate matter with a diameter smaller than 2.5 micrometres (PM2.5) at 100 m resolution. Applied to the Beijing Yi Zhuang and Tangshan industrial parks and evaluated against observations. The coupled model achieved a normalized mean bias (NMB) ranging from 3.1 % to 6.2 %, improving upon NAQPMS (-16.9 % to -7.7 %). Spatial analysis revealed that coarse regional grids underestimated the PM2.5 concentrations at industrial sites by smoothing gradients, whereas IAQMS-Industry successfully resolved spatial patterns. Industrial point emissions accounted for 22.9 %-26.4 % of PM2.5 in the coupled model, which was significantly greater than the regional model estimates of 1.6 %-13.7 %. These findings indicate that regional models overestimate pollutant dispersion processes in industrial parks while underestimating local industrial impacts. By explicitly resolving point-source dynamics and linking them to regional transport, IAQMS-Industry provides a robust tool for designing targeted emission controls in industrial cities and balancing local air quality improvements with minimized regional pollution outflow. This study underscores the necessity of multiscale modelling for accurate source apportionment and informed environmental governance in industrial zones.

Air Pollution↗

PubMed2026

Visualizing the future: impact of holographic visualization on teaching minimally invasive veneer preparation: a randomized controlled trial.

BACKGROUND: Minimally invasive veneer preparation in prosthodontic education requires advanced spatial understanding and psychomotor precision. Although immersive technologies are increasingly used in dental education, evidence regarding the educational effectiveness of holographic visualization in prosthodontics remains limited. This randomized controlled trial evaluated the impact of holographic visualization on preparation quality and student-reported educational outcomes during preclinical training in minimally invasive veneer preparation. METHODS: Sixty undergraduate dental students were randomly assigned to receive either conventional two-dimensional photographic visualization (n = 30) or holographic three-dimensional visualization (n = 30). Following a standardized calibration session and baseline preparation, participants performed a second veneer preparation after exposure to the assigned visualization modality. Preparations were independently assessed by two blinded evaluators using a predefined scoring rubric. Within-group changes were analysed using Wilcoxon signed-rank tests, and between-group differences were assessed using analysis of covariance adjusted for baseline performance. Student-reported outcomes were compared using Mann-Whitney U tests with false discovery rate correction. RESULTS: Both groups showed significant improvements in preparation quality from baseline to post-intervention (both p < 0.001). However, no significant between-group differences were observed (adjusted mean difference: 0.60 points; 95% confidence interval: -0.48 to 1.67; p = 0.269). Overall student-reported outcomes were comparable between groups. Spatial understanding showed the largest between-group effect in favour of holographic visualization, although this difference was not significant after correction for multiple comparisons. Holographic visualization was highly accepted by students, and 70% supported its future integration into dental education. CONCLUSIONS: Although holographic visualization did not significantly improve immediate preparation quality compared with conventional two-dimensional photographs, it was highly accepted by students and showed the largest observed effect for perceived spatial understanding. These findings suggest that holographic visualization may primarily support spatial understanding and represent a valuable adjunct for teaching complex three-dimensional concepts in preclinical prosthodontic education. TRIAL REGISTRATION: German Clinical Trials Register (DRKS), DRKS00040713, prospectively registered on 22 June 2026.

Humans↗

PubMed2026

Acupuncture improves depressive symptoms and prefrontal cortical function in mild to moderate depressive disorder: A randomized sham-controlled trial and fNIRS study.

BACKGROUND: Depressive disorder is a common mental illness associated with substantial functional impairment. Although pharmacotherapy is widely used, its effectiveness is often limited by adverse effects and poor adherence. Acupuncture has been increasingly applied as a complementary treatment for depression, and its neurobiological characteristics remain unclear. OBJECTIVE: This randomized, sham-controlled trial aimed to evaluate the clinical efficacy of acupuncture for mild to moderate depressive disorder and to investigate its effects on prefrontal cortical function using functional near-infrared spectroscopy (fNIRS). METHODS: Patients with mild to moderate depressive disorder were randomly assigned to a real acupuncture (RA) group or a sham acupuncture (SA) group and received standardized treatment for 8 weeks. Clinical outcomes were assessed using the Self-Rating Depression Scale (SDS), Self-Rating Anxiety Scale (SAS), Short Form-36 Health Survey (SF-36), and a traditional Chinese medicine syndrome score. A subset of participants underwent fNIRS assessment during resting-state and task-based conditions to evaluate prefrontal cortical activation and functional connectivity. RESULTS: Compared with baseline, the RA group showed significant reductions in SDS and SAS scores and significant improvements in SF-36 emotional domains, with effects emerging at Week 4 and persisting up to 12 weeks after treatment. Improvements were greater and more stable in the RA group than in the SA group. fNIRS analyses revealed enhanced activation in dorsolateral and medial prefrontal regions and strengthened prefrontal functional connectivity following acupuncture, whereas neural changes in the SA group were limited. CONCLUSION: Acupuncture is effective for improving depressive and anxiety symptoms and quality of life in patients with mild to moderate depressive disorder. Modulation of prefrontal cortical activation and connectivity may underlie its antidepressant effects.

Humans↗

PubMed2026

Effectiveness of passive vs. assistive robotic gait training on functional recovery and neuroplasticity post-stroke: A randomized controlled trial.

OBJECTIVE: This study seeks to compare the impacts of various robotic gait training (RAGT) modes on lower limb motor function recovery in stroke patients while exploring the corresponding neural mechanisms. DESIGN: A single-blind, randomized controlled trial. SETTING: Inpatient Rehabilitation Facility. PARTICIPANTS: Forty-eight patients aged 18-80 who had experienced their first unilateral subacute stroke accompanied by walking impairments were included. INTERVENTIONS: Participants were randomly assigned to: (1) assistive mode training, (2) passive mode training, or (3) control group receiving only traditional rehabilitation. Clinical and neurological outcomes were assessed at pre-intervention (T0), and post-2-week intervention (T1). MAIN OUTCOME MEASURES: Outcomes were evaluated using the Fugl-Meyer Assessment for Lower Extremity, Berg Balance Scale, Modified Barthel Index, the Functional Ambulatory Category, and functional near-infrared spectroscopy. RESULTS: Among the 48 patients recruited, significant time effects were observed across all groups in FMA-LE scores (p < 0.001). Notable improvements were detected in the conventional group (MD = 2.69, p＜0.01) and the passive group (MD = 3.67, p < 0.001), with the assistive mode also demonstrating a significant effect (MD = 1.79, p < 0.05). BBS scores improved across all groups; however, no significant differences were noted between the groups (p = 0.11). Similarly, MBI scores showed a significant time effect (p < 0.001), without notable group differences (p = 0.29). CONCLUSION: All training modalities effectively enhanced motor function, balance, and daily living skills in stroke patients. Distinct cortical activation and connectivity patterns were observed between training modalities, which may reflect different neuroplastic mechanisms. These preliminary neural differences may help inform personalized rehabilitation strategies, although no clinical superiority of one mode over another can be concluded from the present data.

Humans↗

PubMed2026

Nonviral transposon‑engineered stem cells characterization: dose‑dependency between vector copy number and transgene expression.

Genetically engineered stem cells hold substantial promises for advancing regenerative medicine, yet ensuring their genomic safety remains a critical challenge. A key safety concern is vector copy number (VCN), which defines the number of integrated transgene copies per genome. Although ddPCR is used to assess VCN in virally transduced cells, its application in transposon‑engineered systems is limited. In this study, we extended VCN determination to non‑viral, transposon‑engineered stem cells. In alignment with FDA recommendations, the primary objective was to establish a robust and quantitative framework for interim VCN determination at the time of lot release. Specifically, we demonstrate that reliable interim VCN estimates increase in a dose‑dependent manner with increasing plasmid input. In addition, strong linear correlations between VCN and both EGFP median fluorescence intensity (MFI) and gene‑of‑interest (GOI) protein expression validate the accuracy of this framework. Furthermore, comparison of two distinct GOIs revealed gene‑specific differences in expression efficiency. Together, these findings validate a standardized VCN determination workflow that quantitatively links plasmid dose, genomic integration, and functional transgene expression. This workflow provides a systematic characterization of engineered cells, offering comprehensive information to support downstream risk‑based analyses to ensure the genomic safety and stability of the final cell product.

Transgenes↗

PubMed2026

Natural deep eutectic solvent in situ formation-based extraction method coupled to high-performance anion-exchange chromatography with pulsed amperometric detection for multiclass carbohydrates in hot pot bases.

A novel method was developed for the simultaneous extraction of fourteen multiclass carbohydrates from high-fat foods via the in situ formation of deep eutectic adducts from analytes and acetate ions. Different natural deep eutectic solvents (NADESs) composed of fructose and organic acids were tested as extraction solvents. A model NADES formulated with sodium acetate and fructose was characterized using Fourier transform infrared (FTIR) spectroscopy and hydrogen nuclear magnetic resonance (1H-NMR) spectroscopy. The critical extraction parameters were systematically optimized using multi-response surface methodology (MRSM) with a central composite design (CCD). The extract was analyzed using high-performance anion-exchange chromatography coupled with pulsed amperometric detection (HPAEC-PAD) using a sodium hydroxide-sodium acetate eluent, which did not require organic solvents. This approach exhibited good linearity over the concentration range of 0.02-10 mg L-1, with correlation coefficients (r) ranging from 0.9994 to 0.9999. The limits of detection and quantification were in the ranges of 0.06-0.42 mg kg-1 and 0.19-1.3 mg kg-1, respectively, which were significantly lower than those of liquid chromatography (LC). The protocol was successfully applied to the determination of fourteen carbohydrates in forty-five hotpot seasoning samples. The recoveries ranged from 86.3% to 104.1%, with relative standard deviations (RSDs) of 0.9-7.1%. By integrating multiple techniques, this strategy simplifies operations, shortens extraction time, and achieves baseline separation of three carbohydrate classes that exhibit poor resolution using a conventional LC method. This study describes an efficient procedure for the simultaneous determination of multiple trace-level carbohydrates in complex samples using HPAEC-PAD.

Journal Article↗

PubMed2026

From bioactive compounds to volatile profiles: a multidimensional characterization of Indonesian stingless bee honeys.

BACKGROUND: Stingless bee honeys are drawing increasing attention as ingredients for functional foods and health-oriented products because of their distinctive sensory characteristics and bioactive potential. In this study, honeys collected from nine stingless bee species reared in West Sumatra, Indonesia, were comprehensively characterized using physicochemical indices, antioxidant assays [DPPH (i.e. 2,2-diphenyl-1-picrylhydrazyl) and ferric reducing antioxidant power], microbiological screening, volatile profiling [gas chromatography-mass spectrometry (GC-MS)] and Fourier transform infrared (FTIR) fingerprinting. RESULTS: Marked between-sample variability was observed across key quality attributes, including pH (2.80-3.68), Brix (49.83-61.25), viscosity (23.36-175.22 cP) and color parameters. FTIR spectra were consistent with carbohydrate-rich matrices and exhibited carbonyl-related bands. GC-MS profiling identified linalool oxide isomers and junenol among the predominant volatiles. To the best of our knowledge, junenol has not previously been reported in stingless bee honey and may represent a potential regional chemical marker for Indonesian stingless bee honeys. Lactic acid bacteria were detected in selected samples, whereas yeast and mold were not detected. Antioxidant activities were comparatively low, which may reflect local environmental and ecosystem-related factors. CONCLUSION: The results provide a multi-parameter baseline for stingless bee honeys produced within a shared ecosystem in West Sumatra and demonstrate the value of integrating conventional chemical indices with FTIR and volatile fingerprints for quality assessment. This combined approach may also support future authentication and origin-tracing frameworks for Indonesian stingless bee honeys. © 2026 Society of Chemical Industry.

Animals↗

PubMed2026

Assay-dependent variability in peptide biomarker quantification: experimental evidence from renalase in chronic kidney disease.

BACKGROUND: Renalase is a promising biomarker for kidney disease, but published levels vary widely between studies. We hypothesised that variability in commercial enzyme-linked immunosorbent assays (ELISAs) kits and matrix effects (serum vs plasma) drive these inconsistencies. METHODS: Paired serum and plasma samples from 56 participants (28 chronic kidney disease (CKD) stages 2-5, 28 healthy controls) were tested using three commercial renalase ELISAs (BTLAB, Cloud-Clone, EIAab). We assessed intra-assay precision, inter-assay agreement (Spearman's rank correlation and Bland-Altman analysis on log10-transformed values), matrix effects, and associations with estimated glomerular filtration rate (eGFR). Diagnostic performance was evaluated by Receiver operating characteristic (ROC) analysis. RESULTS: Inter-assay renalase concentrations differed markedly (up to orders of magnitude), with weak inter-assay correlations (r ≤ 0.25). Bland-Altman analyses revealed large, systematic biases between kits. Only the BTLAB assay showed consistent serum/plasma agreement, a significant correlation with eGFR (ρ ≈ 0.32-0.42, p < 0.05), and moderate discriminatory performance for CKD in serum (AUC = 0.70) and plasma (AUC = 0.68). Cloud-Clone and EIAab produced divergent results and strong matrix-dependent biases. CONCLUSIONS: Observed variability among commercial ELISA platforms may compromise comparability between studies. Harmonisation, standardised reference materials, and cross-validation are necessary before renalase assays can be used reliably in clinical practice.

Humans↗

PubMed2026

Structural complexity and mechanistic diversity of MECOM rearrangements in myeloid neoplasms.

Rearrangements involving MECOM at chromosome 3q26.2 are recurrent in myeloid neoplasms, classically represented by inv(3)(q21q26.2) and t(3;3)(q21;q26.2), which reposition the GATA2-distal haematopoietic enhancer and drive aberrant EVI1 overexpression. However, the full structural and mechanistic diversity of MECOM rearrangements (MECOM-r) is yet to be explored. We retrospectively analysed 97 cases with cytogenetically defined MECOM-r and identified 12 with complex rearrangements using GTG-banded karyotyping and tri-colour interphase/metaphase fluorescence in situ hybridisation analyses. These 12 cases demonstrated remarkable structural heterogeneity. The abnormalities encompassed translocations, inversions, insertions, duplications, and deletions, which often coexisted within the same specimen as multiple rearranged subclones. Insertional events emerged as a distinct mechanism of MECOM activation. These encompassed insertions of MYNN and/or MECOM into chromosomes 1 and 6, insertion of chromosome 8 segment into MECOM, and inverted insertions between homologous chromosome 3 segments. Recurrent breakpoints at 3q21 across multiple cases, together with localised copy number imbalances frequently involving the MYNN and GOLIM4 loci at 3q26.2, underscore the architectural fragility of these two regions. Co-occurring abnormalities such as -5/del(5q), -7/del(7q), and TP53 loss were common, reflecting a permissive genomic background for chromosomal reassembly. Our findings expand the mechanistic landscape of MECOM-r beyond canonical inv(3)/t(3;3), establishing 3q21 and 3q26.2 as structural 'hotspots' and genomic instability hubs. Distinct from fusion-driven oncogenes such as KMT2A, MECOM activation results from enhancer hijacking and regional structural remodelling, leading to EVI1 overexpression and clonal evolution in myeloid malignancies.

Humans↗

PubMed2026

Comparative Transcriptomics Reveals Shared Downstream Pathways in Craniofacial Pathology.

Treacher Collins syndrome and Nager syndrome are craniofacial developmental disorders caused by defects in ribosome biogenesis and RNA splicing, respectively, yet they exhibit overlapping abnormalities affecting neural crest cell-derived craniofacial structures. To investigate shared downstream pathogenic mechanisms, we performed a comparative transcriptomic analysis of zebrafish polr1c and sf3b4 mutant models from our previous studies. Comparative analysis identified 17 shared differentially expressed genes (DEGs) between polr1c and sf3b4 mutants, with the majority of shared genes dysregulated in the same direction, indicating a coordinated rather than random transcriptional response. Gene ontology analysis identified ATP-dependent protein folding chaperone activity as the only shared molecular function, driven in part by upregulation of hsp90aa1.2, indicating a common proteostasis response. Because chaperone activity is linked to extracellular matrix (ECM) protein processing, we cross-referenced DEGs from both mutants against the curated zebrafish matrisome. Three of the 17 shared DEGs (serpinh1b, il11a, and lepa) were matrisome-associated and upregulated in both mutants. Serpinh1b, a collagen-specific chaperone, was strongly expressed in craniofacial cartilage and mesenchymal populations during pharyngeal arch development and exhibited nearly identical fold changes in both mutants. Il11a is of particular interest because its receptor, IL11RA, is known to be associated with human craniosynostosis, suggesting potential relevance to craniofacial development. Together, it is possible to hypothesize that shared chaperone-associated transcriptional changes, together with altered ECM-related gene expression, may contribute to polr1c- and sf3b4-associated craniofacial disorders, warranting further functional validation.

Extracellular Matrix↗

PubMed2026

Electrocardiographic correlates of pacing induced cardiomyopathy and response to cardiac resynchronization therapy.

BACKGROUND: Chronic right ventricular (RV) pacing (RVP) causes pacing-induced cardiomyopathy (PICM) in only a small number of patients. We evaluated ECG correlates of (i) PICM and (ii) response to cardiac resynchronization therapy (CRT) upgrade. METHODS: We conducted a retrospective case-control study by including all CRT upgrades for PICM (LVEF <50%) at our center between 2014 and 2018. Controls were patients with ≥5 ECGs all demonstrating RVP over ≥2 years and all echocardiographic LVEF ≥50%. Root-summed-squared (3D) ECG was obtained from reconstructed vectorcardiographic X-Y-Z leads. Predictors of PICM and CRT response were assessed as area under ROC curve (AUC) for pre-CRT and Δ (post-CRT - pre-CRT) ECG intervals and QRS voltage-time-integrals (VTI). RESULTS: We included 104 patients with CRT upgrade for PICM (age 73.7 ± 10.5 years, female 29.1%, QRS duration 167.8 ± 25.2 ms, LVEF 28.8 ± 8.0%, ΔLVEF 13.8 ± 10.3%) and 178 controls without PICM (age 73.2 ± 14.9 years, female 52.8%, QRS duration 144.0 ± 20.9 ms, LVEF 56.7 ± 5.2%). PICM was best identified by VTIQRS-3D (AUC 0.851; VTIQRS-3D ≥ 80 μVs sensitivity 87.5%, specificity 63.5%), VTIQRS-Y (0.846), and QRS duration (0.775). CRT response (LVEF increase ≥10% at 3-12 months) occurred in 73/104 (70.2%) patients. Lack of CRT response was best predicted by longer pre-CRT QRS duration (AUC 0.640; QRS duration ≥180 ms sensitivity 45.2%, specificity 83.6%), and less ΔVTIQRS-3D (0.609) and ΔVTIQRS-X (0.608). CONCLUSION: In patients with chronic RVP, VTIQRS-3D ≥ 80 μVs can be used as a screening test for echocardiographic confirmation of PICM. RV-paced QRS duration >180 ms, on the other hand, identifies those who may not respond to CRT upgrade.

Humans↗

PubMed2026

Integrative modeling of the genome structure and dynamics in fission yeast.

Genome organization in the nucleus is highly structured and dynamic. Recent advances in genomic technology have enabled the measurement of genome-wide architecture and locus-specific motion, yielding contact maps and live-cell trajectories. However, these outcomes are derived from different modalities and are not directly comparable, with their quantitative integration being a key challenge. Here we establish a genome-wide live-cell imaging platform in fission yeast Schizosaccharomyces pombe, tracking 131 chromosomal loci, along with the spindle pole body (SPB) and nucleolus, to construct a quantitative map of locus dynamics. By integrating these dynamics with contact data through polymer modeling of Hi-C data, we build a physics-based "digital twin" of the S. pombe genome consistent with the spatiotemporal dynamics of interphase chromatin. We validate it against genome-wide mobility patterns and known architectural features, including centromere and telomere clustering. The model also identifies distinct dynamical regimes: centromere- and telomere-proximal loci relax within [Formula: see text]150 s, whereas the remaining loci relax within [Formula: see text]70 s. We measure semiperiodic dynamics of SPB motion, including a characteristic peak near 225 s and [Formula: see text] fluctuations. We use the model with SPB-directed forcing to show how these low-frequency components propagate through the genome to drive genome-wide chromatin displacements. Together, this predictive physics-based modeling framework integrates genome structure and dynamics to reveal how nuclear mechanical driving forces shape chromosome motion, linking mechanically driven chromatin responses to genome maintenance and regulation.

Schizosaccharomyces↗

PubMed2026

Mesenchymal Stem Cell-Derived Exosomes Combined With 3-Dimensional Hyaluronan-Based Scaffold Promote Tendon-to-Bone Tunnel Healing.

PURPOSE: Tendon-to-bone healing remains a major clinical challenge due to poor regenerative capacity at the enthesis. This study aimed to evaluate the effects of mesenchymal stem cell-derived exosomes combined with a 3-dimensional hyaluronan-based scaffold on graft healing within bone tunnels. This study was conducted in accordance with the ARRIVE (Animal Research: Reporting of In Vivo Experiments) guidelines. METHODS: A total of 128 tendon-bone models were created in 64 Sprague-Dawley rats, randomized into four groups: control, exosome-only, scaffold-only, and exosome-loaded scaffold. At weeks 4 and 8 postoperatively, samples were analyzed histologically (hematoxylin-eosin, Masson Trichrome), immunohistochemically (fibroblast growth factor 2, bone morphogenetic protein 2), and biomechanically (maximum failure load). RESULTS: At both time points, the exosome-loaded scaffold group demonstrated significantly enhanced vascularization, cellular activity, and collagen fiber continuity and parallelism compared to all other groups (P < .05). Fibroblast growth factor 2 and bone morphogenetic protein 2 expression levels were highest in the exosome-loaded scaffold group, indicating early activation of proregenerative pathways. Biomechanically, this group also exhibited the greatest maximum failure load (15.64 ± 0.86 N at week 4; 22.97 ± 2.86 N at week 8), suggesting superior tendon-to-bone integration. The exosome-only group showed delayed but comparable improvements by week 8. CONCLUSIONS: Combining mesenchymal stem cell-derived exosomes with a 3-dimensional hyaluronan-based polycaprolactone/tricalcium phosphate scaffold enhances early and sustained healing at the tendon-bone interface. This cell-free, biocompatible strategy significantly improves vascularization, growth factor expression, collagen organization, and mechanical strength. These findings support its potential as a clinically translatable approach for improving tendon-to-bone healing outcomes. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic V.

Animals↗

PubMed2026

Ageing effects on chemical, physical, mechanical, and morphological properties of clear aligners - a systematic review.

BACKGROUND: Clear aligner (CA) therapy has experienced rapid use over the past two decades to treat orthodontic malocclusions. However, evidence on CA material degradation in the oral environment remains limited and often focuses on single brands or isolated material properties. OBJECTIVES: To investigate CA ageing characteristics across different materials and brands and evaluate the chemical, physical, mechanical, and morphological changes following simulated or intraoral ageing. SEARCH METHODS: Five databases (PubMed, Web of Science, MEDLINE [Ovid], ProQuest, and Scopus) were searched to 18 March 2026, with no restrictions. ELIGIBILITY CRITERIA: Studies assessing CA properties after intraoral use or simulated ageing (thermocycling, cyclic loading, or liquid immersion) were included. DATA COLLECTION AND ANALYSIS: Study selection followed PRISMA 2020. RoB was assessed using QUIN for purely in vitro studies, JBI for cohort in vivo studies, and Cochrane RoB 2 for RCTs. Results were synthesised narratively and organised by property domain, as substantial methodological heterogeneity precluded formal meta-analysis. Where protocols were comparable, a simple pooled weighted mean was calculated and presented graphically. RESULTS: Ninety-five studies were included. RoB was low in eight studies, moderate in sixty-two, and high in twenty-five. Chemical composition remained largely stable during ageing, though some brands showed trace elemental release. Physical, mechanical, and morphological properties showed material-dependent deterioration. Pooled discolouration was greatest with coffee (weighted mean ΔE = 70.9), versus tea (ΔE = 18.4) and red wine (ΔE = 11.5), with Invisalign® consistently exceeding the clinically perceptible threshold. Force decay of 40-90% typically occurred within 48 h. Thermoplastic polyurethane (TPU)-based and directly printed aligners (DPAs) generally showed greater susceptibility than polyethylene terephthalate glycol-modified (PETG)-based aligners, though findings on hardness, roughness, and stiffness were inconsistent. CONCLUSIONS: CA materials undergo clinically relevant degradation during use, particularly in TPU-based and DPAs aligners. Clinicians may need to prioritise material-specific protocols, reinforce dietary and cleaning instructions, and consider force decay when determining aligner replacement intervals. PROSPERO number: CRD420251110248.

Humans↗

PubMed2026

Biomass burning contributions to Mexico City's atmospheric CO2 estimated using a multi-isotope approach.

Fossil fuel combustion dominates anthropogenic emissions worldwide; however, special attention should be addressed to biomass burning, since it is an increasingly important contributor under warmer, drier fire-weather conditions exacerbated by climate change. These emissions could impact the atmospheric composition of heavily urbanized environments. To assess the influence of biomass burning, along with fossil fuels combustion and soil and plant respiration on Mexico City's atmospheric composition, we conducted a year-long (December 2023-December 2024) isotopic monitoring of atmospheric CO2, combining radiocarbon (Δ14C), CO2 stable isotopes (δ13C, δ18O), and CO/CO2 ratios. Once defined the isotopic signatures and the characteristic CO/CO2 that describe the sources, we performed Monte Carlo simulations under two tracer modalities (Δ14C + CO/CO2 and Δ14C + CO2 stable isotopes) for source apportionment. Results show that during the dry season, particularly in March-April, atmospheric Δ14C values approached and overlapped background levels despite Mexico City's fossil-fuel dominance, indicating enhanced non-fossil inputs. Moreover, backward HYSPLIT trajectories supported that these elevated Δ14C values coincided with regional wildfire activity. Monte Carlo results attributed up to ∼34 %-60 % of local CO2 to biomass burning in April, followed by March with contributions of ∼31 %-49 %. Since these biomass burning figures contrast with the official emissions inventory of Mexico City metropolitan area, which assigns <1 % of total CO2 emissions to biomass burning, this study could exhibit the emissions inventory underestimation of this source, and thus, the need to reassess and incorporate top-down isotopic constraints in fire-affected urban regions.

Mexico↗

PubMed2026

PdIr bimetallic nanozyme engineered metal-organic frameworks integrated dual-mode sensor toward Stx2 detection in food.

Shiga toxin II (Stx2) has attracted extensive attention due to its toxicity and pathogenicity, making the development of sensitive detection methods urgent. This study constructed a dual-mode sensing platform for the sensitive detection of Stx2 in food. Composite material UIO-66@PdIr with peroxidase-like activity and fluorescent properties was synthesized and combined with cDNA as the signal probe, while aptamer-modified magnetic beads served as the capture probe. Specific binding of Stx2 to the aptamer triggered the release of the signal probe, enabling colorimetric and fluorescence signal readout. The colorimetric mode showed a linear range of 0.05-100 ng/mL with an LOD of 0.039 ng/mL, and the fluorescence mode exhibited 0.01-1000 ng/mL with an LOD of 0.0097 ng/mL. Additionally, this method was successfully applied to the detection of Stx2 in food, and the recovery rates were 94.33% ∼ 102.20%. It indicated that the constructed sensor holds great practical potential for Stx2 detection.

Food Contamination↗