Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “DNA packaging”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
PubMed1983

Bacteriophage P22 in vitro DNA packaging monitored by agarose gel electrophoresis: rate of DNA entry into capsids.

Bacteriophage P22, like other double-stranded DNA bacteriophages, packages DNA in a preassembled, DNA-free procapsid. The P22 procapsid and P22 bacteriophage have been electrophoretically characterized; the procapsid has a negative average electrical surface charge density (sigma) higher in magnitude than the negative sigma of the mature bacteriophage. Dextrans, sucrose, and maltose were shown to have a dramatic stimulatory effect on the in vitro packaging of DNA by the P22 procapsid. However, sedoheptulose, smaller sugars, and smaller polyols did not stimulate in vitro P22 DNA packaging. These and other data suggest that an osmotic pressure difference across some particle, probably a capsid, stimulates P22 DNA packaging. After in vitro packaging was optimized by including dextran 40 in extracts, the entry kinetics of DNA into P22 capsids were measured. Packaged DNA was detected by: (i) DNA-specific staining of intact capsids after fractionation by agarose gel electrophoresis and (ii) agarose gel electrophoresis of DNase-resistant DNA after release of DNase-resistant DNA from capsids. It was found that the first DNA was packaged by 1.5 min after the start of incubation. The data further suggest that either P22 capsids with DNA partially packaged in vitro are too unstable to be detected by the above procedures or entry of DNA into the capsid occurs in less than 0.25 min.

Bacteriophages↗
PubMed2006

Herpes simplex virus type 1 DNA-packaging protein UL17 is required for efficient binding of UL25 to capsids.

Herpes simplex virus type 1 packages its DNA genome into a precursor capsid, referred to as the procapsid. Of the three capsid-associated DNA-packaging proteins, UL17, UL25, and UL6, only UL17 and UL6 appear to be components of the procapsid, with UL25 being added subsequently. To determine whether the association of UL17 or UL25 with capsids was dependent on the other two packaging proteins, B capsids, which lack viral DNA but retain the cleaved internal scaffold, were purified from nonpermissive cells infected with UL17, UL25, or UL6 null mutants and compared with wild-type (wt) B capsids. In the absence of UL17, the levels of UL25 in the mutant capsids were much lower than those in wt B capsids. These results suggest that UL17 is required for efficient incorporation of UL25 into B capsids. B capsids lacking UL25 contained about twofold-less UL17 than wt capsids, raising the possibilities that UL25 is important for stabilizing UL17 in capsids and that the two proteins interact in the capsid. The distribution of UL17 and UL25 on B capsids was examined using immunogold labeling. Both proteins appeared to bind to multiple sites on the capsid. The properties of the UL17 and UL25 proteins are consistent with the idea that the two proteins are important in stabilizing capsid-DNA structures rather than having a direct role in DNA packaging.

Animals↗
PubMed1985

Isolation and characterization of bacteriophage T3/T7 hybrids and their use in studies on molecular basis of DNA-packaging specificity.

In vitro DNA-packaging systems of bacteriophages T3 and T7 packaged homologous DNA more efficiently than heterologous DNA. Packaging of phage DNA proceeds by way of concatemeric intermediates (H. Fujisawa, J. Miyazaki, and T. Minagawa (1978), Virology 87, 394-400). The conversion of mature homologous and heterologous DNAs to concatemers was efficient in both the T3- and T7-packaging systems. In vitro complementation experiments indicate that the gene 19 product (gp19) specifies which DNA enters the capsid. To identify DNA regions recognized by the packaging systems, T3/T7 hybrids were constructed and physical maps of the hybrid DNAs were determined by restriction enzyme analysis. By comparing restriction maps and in vitro packaging of hybrid DNAs, it is concluded that the sequence responsible for specificity of DNA packaging is confined within 5% of the ends of the T3 and T7 genomes.

Base Sequence↗
PubMed1984

Steps in the stabilization of newly packaged DNA during phage P22 morphogenesis.

The protein products of three adjacent P22 genes, 4, 10 and 26, are required for the stabilization of DNA newly packaged into P22 phage capsids. We have isolated unstable DNA containing capsids from cells infected with mutants defective in these genes. All three classes could be converted into mature phage in vitro, confirming that they represent intermediates in particle maturation. The first of the three proteins to add to the newly filled capsids is gp4, followed by gp10 and gp26. The active form of gp4 sediments at 3 S, while the active forms of both gp10 and gp26 sediment at 5 S. These soluble subunits appear to polymerize onto the newly filled capsids to form the neck of the mature phage, the channel for DNA injection. Since gp4 is the first protein to act after DNA packaging, the unstable DNA containing capsids from 4- -infected cells must represent the direct product of the packaging of DNA into procapsids. The major fraction of these capsids lost activity with a half-life of 1.1 minutes at 23 degrees C, though they were much more stable at 0 degree C. Electron microscopic observations indicated that the loss of activity was due to the DNA exiting from the incomplete capsids. The marginal stability of the condensed DNA molecules within capsids is consistent with models of ATP-driven condensation and spontaneous DNA ejection. The basis of the stability of these highly condensed molecules remains to be determined.

Capsid↗
PubMed1982

Genome of Bacillus subtilis Bacteriophage SPP1: Structure and Nucleotide Sequence of pac, the Origin of DNA Packaging.

The DNA of Bacillus subtilis bacteriophage SPP1 is terminally redundant and partially circularly permuted. To explain these parameters, we followed the Streisinger-Botstein models of phage maturation and assumed that packaging of SPP1 DNA begins at a unique genomic site ("pac") and proceeds sequentially from there. We describe the sequence of about 1,000 nucleotides surrounding pac. This together with size determinations of small, pac-terminated restriction fragments has revealed heterogeneity of the natural pac ends of SPP1 DNA. Such ends fell in each DNA strand into a region of five to seven nucleotides. However, within this range more than 50% of all molecules terminated with defined cytosines on both strands, generating a 3' protruding terminus. The nucleotide sequence of the DNA segment surrounding pac did not reveal any features which would distinguish this region.

Journal Article↗
PubMed1983

Tests of spool models for DNA packaging in phage lambda.

Experiments are reported which bear on two spool models proposed for packaging the DNA of phage lambda. Both spool models fill an assumed spherical cavity with DNA wrapped in cylindrical or quasi-cylindrical layers composed of adjacent circular turns. In the curved-spool model, a single continuous segment of DNA, about 20% of the DNA length and probably located near the left end of the DNA, is in contact with the coat protein of the phage capsid. In the straight spool model, there are several DNA segments in contact with the capsid; they are concentrated in one half (probably the left half) of lambda DNA. We have identified the loci on the DNA which are in contact with the capsid by chemical crosslinking, induced by ultraviolet-irradiation of phage containing 5-bromodeoxyuridine in place of thymine. In an electron microscope experiment, phage are first lysed with EDTA, and then spread in a cytochrome c film by the formamide method. The disrupted capsid, which has the appearance of a phage ghost, serves as a marker showing where the DNA is crosslinked to the coat. The left end of the DNA is not distinguished from the right end, and so the map of DNA-capsid contacts is folded over on itself. Contacts are found nearly randomly over the entire map. In a second experiment, DNA from lysed, crosslinked phage is cut either with EcoRI or HindIII restriction endonucleases and the cut restriction fragments are labeled at their ends with 32P. Density centrifugation in a CsCl gradient separates free DNA from restriction fragments crosslinked to protein. After digestion with proteinase k, the DNA fragments previously crosslinked to protein are identified by size after agarose gel electrophoresis. DNA fragments from all parts of the genome are found. These two experiments show that, if the DNA of each phage is packaged identically, then the curved-spool model is ruled out and the straight spool model is unlikely. Alternatively, the manner of packaging the DNA may vary from one phage to the next. These results agree with other recent experiments on lambda DNA packaging by Hall & Schellman (1982a,b), and by Haas et al. (1982). A different experiment is also reported. The psoralen derivative aminomethyltrioxalen (AMT) is allowed to intercalate into lambda phage and then the DNA strands are crosslinked by ultraviolet-irradiation after the rapid phase of AMT intercalation is complete. The DNA is subsequently denatured by glyoxal modification and spread for electron microscopy in a cytochrome c film by the formamide method.(ABSTRACT TRUNCATED AT 400 WORDS)

Bacteriophage lambda↗
PubMed2006

A critical coiled coil motif in the small terminase, gp16, from bacteriophage T4: insights into DNA packaging initiation and assembly of packaging motor.

Double-stranded DNA packaging in bacteriophages is driven by one of the most powerful force-generating molecular motors reported to date. The phage T4 motor is composed of the small terminase protein, gpl6 (18kDa), the large terminase protein, gp17 (70kDa), and the dodecameric portal protein gp20 (61kDa). gp16, which exists as an oligomer in solution, is involved in the recognition of the viral DNA substrate, the very first step in the DNA packaging pathway, and stimulates the ATPase and packaging activities associated with gp17. Sequence analyses using COILS2 revealed the presence of coiled coil motifs (CCMs) in gp16. Sixteen T4-family and numerous phage small terminases show CCMs in the corresponding region of the protein, suggesting a common structural and functional theme. Biochemical properties such as reversible thermal denaturation and analytical gel filtration data suggest that the central CCM-1 is critical for oligomerization of gp16. Mutations in CCM-1 that change the hydrophobicity of key residues, or pH 6.0, destabilized coiled coil interactions, resulting in a loss of gp16 oligomerization. The gp16 oligomers are in a dynamic equilibrium with lower M(r) intermediate species and monomer. Monomeric gp16 is unable to stimulate gp17-ATPase, an activity essential for DNA packaging, while conversion back into oligomeric form restored the activity. These data for the first time defined a CCM that is critical for structure and function of the small terminase. We postulate a packaging model in which the gp16 CCM is implicated in the regulation of packaging initiation and assembly of a supramolecular DNA packaging machine on the viral concatemer.

Adenosine Triphosphatases↗
PubMed1991

sRNA of phage phi 29 of Bacillus subtilis mediates DNA packaging of phi 29 proheads assembled in Escherichia coli.

The structural genes of the prohead of phage phi 29 of Bacillus subtilis and a small phi 29 RNA (sRNA) were cloned and expressed in Escherichia coli individually or in combination to study the role of the sRNA in prohead assembly and the mechanism of prohead morphogenesis. The genes coding for the proteins of the scaffold (gp7), the capsid (gp8), the portal vertex (gp10), and the dispensable head fiber (gp8.5) were expressed in E. coli and the gene products were assembled, with and without the presence of the sRNA, into uniform and prolate particles that resembled the typical native phi 29 prohead. No differences in particle size and shape were found between the particles of 7-8-8.5-10 (scaffold-capsid-fiber-portal vertex) and 7-8-8.5-10-RNA (scaffold-capsid-fiber-portal vertex-RNA), suggesting that the phi 29 sRNA was not required for phi 29 prohead assembly. The 7-8-8.5-10 particles produced in E. coli in the absence of phi 29 sRNA were fully competent to package phi 29 DNA in the defined in vitro DNA packaging system by the addition of purified sRNA. Moreover, these DNA-filled heads were assembled into infectious virions in extracts. Without the addition of the sRNA, the 7-8-8.5-10 particles were incompetent while the 7-8-8.5-10-RNA particles were competent in DNA packaging. Bacterial sRNA present in E. coli cannot substitute for the phi 29 sRNA. The assembly of prohead particles in E. coli indicated that host factors unique to B. subtilis were not required. The evidence that the phi 29 sRNA was not required for phi 29 prohead assembly and was not a fixed structural component of the phi 29 prohead favors the conclusion that the phi 29 sRNA is a specific enzyme or morphogenetic factor in DNA packaging.

Bacillus subtilis↗
PubMed2003

Defining the bacteriophage T4 DNA packaging machine: evidence for a C-terminal DNA cleavage domain in the large terminase/packaging protein gp17.

Double-stranded DNA packaging in bacteriophage T4 and other viruses occurs by translocation of DNA into an empty prohead by a packaging machine assembled at the portal vertex. Coordinated with this complex process is the cutting of concatemeric DNA to initiate and terminate DNA packaging and encapsidate one genome-length viral DNA. The catalytic site responsible for cutting, and the mechanisms by which cutting is precisely coordinated with DNA translocation remained as interesting open questions. Phage T4, unlike the phages with defined ends (e.g. lambda, T3, T7), packages DNA in a strictly headful manner, and exhibits no strict sequence specificity to initiate or terminate DNA packaging. Previous evidence suggests that the large terminase protein gp17, a key component of the T4 packaging machine, possesses a non-specific DNA cutting activity. A histidine-rich metal-binding motif, H382-X(2)-H385-X(16)-C402-X(8)-H411-X(2)-H414-X(15)-H430-X(5)-H436, in the C-terminal half of gp17 is thought to be involved in the terminase cleavage. Here, exhaustive site-directed mutagenesis revealed that none of the cysteine and histidine residues other than the H436 residue is critical for function. On the other hand, a cluster of conserved residues within this region, D401, E404, G405, and D409, are found to be critical for function. Biochemical analyses showed that the D401 mutants exhibited a novel phenotype, showing a loss of in vivo DNA cutting activity but not the DNA packaging activity. The functional nature of the critical residues and their disposition in the conserved loop region between two predicted beta-strands suggest that these residues are part of a metal-coordinated catalytic site that cleaves the phosphodiester bond of DNA substrate. The data suggest that the T4 terminase consists of at least two functional domains, an N-terminal DNA-translocating ATPase domain and a C-terminal DNA-cutting domain. Although the DNA recognition mechanisms may be distinct, it appears that T4 and other phage terminases employ a common catalytic paradigm for phosphodiester bond cleavage that is used by numerous nucleases.

Adenosine Triphosphatases↗
PubMed1992

DNA packaging induced by micellar aggregates: a novel in vitro DNA condensation system.

Evidence for a conceptually novel DNA packaging process is presented. X-ray scattering, electron microscopy, and circular dichroism measurements indicate that in the presence of positively charged micellar aggregates and flexible anionic polymers, such as negatively charged polypeptides or single-stranded RNA species, a complex is formed in which DNA molecules are partially embedded within a micellar scaffold and partially condensed into highly packed chiral structures. Based on studies of micelle-DNA and micelle-flexible anionic polymer systems, as well as on the known effects of a high charge density upon the micellar organization, a DNA packaging model is proposed. According to this model, the DNA induces the elongation of the micelles into rodlike aggregates, forming a closely packed matrix in which the DNA molecules are immobilized. In contrast, the flexible anionic polymers stabilize clusters of spherical micelles which are proposed to effect a capping of the rodlike micelles, thus arresting their elongation and creating surfactant-free segments of the DNA that are able to converge and collapse. Thus, unlike other in vitro DNA packaging systems, in which condensation follows encounters between charge-neutralized DNA molecules, a prepackaging phase where the DNA is immobilized within a matrix is proposed in this case. Cellular and nuclear membranes have been implicated in DNA packaging processes in vivo, and negatively charged polyelectrolytes were shown to be involved in the processes. These observations, combined with the basic tenets of the DNA condensation system described here, allow for the progression to the study of more elaborate model systems and thus might lead to insights into the nature and roles of the intricate in vivo DNA-membrane complexes.

Circular Dichroism↗
PubMed1997

Purification and characterization of the small subunit of phage T4 terminase, gp16, required for DNA packaging.

Phage T4 terminase is an enzyme that binds to the portal protein of proheads and cuts and packages concatemeric DNA. The T4 terminase is composed of two subunits, gene products (gp) 16 and 17. The role of the small subunit, gp16, in T4 DNA packaging is not well characterized. We developed a new purification procedure to obtain large quantities of purified gp16 from an overexpression vector. The pure protein is found in two molecular weight forms, due to specific C-terminal truncation, displays in vitro packaging activity, and binds but does not hydrolyze ATP. gp16 forms specific oligomers, rings, and side-by-side double rings, as judged by native polyacrylamide gel electrophoresis and scanning transmission electron microscopy measurements. The single ring contains about eight monomers, and the rings have a diameter of about 8 nm with a central hole of about 2 nm. A DNA-binding helix-turn-helix motif close to the N terminus of gp16 is predicted. The oligomers do not bind to DNA, but following denaturation and renaturation in the presence of DNA, binding can be demonstrated by gel shift and filter binding assays. gp16 binds to double-stranded DNA but not single-stranded DNA, and appears to bind preferentially to a gene 16-containing DNA sequence.

Adenosine Triphosphatases↗
PubMed1990

Phylogenetic analysis and secondary structure of the Bacillus subtilis bacteriophage RNA required for DNA packaging.

An unusual RNA molecule encoded by the Bacillus subtilis bacteriophage phi 29 is a structural component of the viral prohead and is required for the ATP-dependent packaging of DNA. Here we report a model of secondary structure for this prohead RNA developed from a phylogenetic analysis of the primary sequences of prohead RNAs of related phages. Twenty-nine phages related to phi 29 were found to produce prohead RNAs. These RNAs were analyzed by their ability to replace phi 29 RNA in in vitro phage assembly, by Northern blot hybridization with a probe complementary to phi 29 RNA, and by partial and complete sequence analyses. These analyses revealed four quite different sequences ranging in length from 161 to 174 residues. The secondary structure deduced from these sequences, in agreement with earlier observations, indicated that prohead RNA is organized into two domains. The larger 5'-domain (Domain I) is composed of 113-117 residues and contains four helices. Three of these helices appear to be organized into a central stem that is interrupted by two unpaired loops and the fourth helix and loop. The smaller 3'-domain (Domain II) is composed of 40-44 residues and consists of two helices. Domains I and II are separated by 8-13 unpaired residues. Nuclease cleavage occurs readily in this single-stranded joining region, and this cleavage allows the subsequent separation of the two RNA domains. The separated Domain I is fully active in DNA packaging in vitro. The functional significance and biological role of Domain II are unknown. The phylogenetic secondary structure model provides a basis for further analysis of the role of this RNA in bacteriophage morphogenesis.

Bacillus subtilis↗
PubMed1999

Analysis of capsid portal protein and terminase functional domains: interaction sites required for DNA packaging in bacteriophage T4.

Bacteriophage DNA packaging results from an ATP-driven translocation of concatemeric DNA into the prohead by the phage terminase complexed with the portal vertex dodecamer of the prohead. Functional domains of the bacteriophage T4 terminase and portal gene 20 product (gp20) were determined by mutant analysis and sequence localization within the structural genes. Interaction regions of the portal vertex and large terminase subunit (gp17) were determined by genetic (terminase-portal intergenic suppressor mutations), biochemical (column retention of gp17 and inhibition of in vitro DNA packaging by gp20 peptides), and immunological (co-immunoprecipitation of polymerized gp20 peptide and gp17) studies. The specificity of the interaction was tested by means of a phage T4 HOC (highly antigenicoutercapsid protein) display system in which wild-type, cs20, and scrambled portal peptide sequences were displayed on the HOC protein of phage T4. Binding affinities of these recombinant phages as determined by the retention of these phages by a His-tag immobilized gp17 column, and by co-immunoprecipitation with purified terminase supported the specific nature of the portal protein and terminase interaction sites. In further support of specificity, a gp20 peptide corresponding to a portion of the identified site inhibited packaging whereas the scrambled sequence peptide did not block DNA packaging in vitro. The portal interaction site is localized to 28 residues in the central portion of the linear sequence of gp20 (524 residues). As judged by two pairs of intergenic portal-terminase suppressor mutations, two separate regions of the terminase large subunit gp17 (central and COOH-terminal) interact through hydrophobic contacts at the portal site. Although the terminase apparently interacts with this gp20 portal peptide, polyclonal antibody against the portal peptide appears unable to access it in the native structure, suggesting intimate association of gp20 and gp17 possibly internalizes terminase regions within the portal in the packasome complex. Both similarities and differences are seen in comparison to analogous sites which have been identified in phages T3 and lambda.

Amino Acid Sequence↗
PubMed1995

DNA packaging intermediates of bacteriophage φX174

BACKGROUND: Like many viruses, bacteriophage phi X174 packages its DNA genome into a procapsid that is assembled from structural intermediates and scaffolding proteins. The procapsid contains the structural proteins F, G and H, as well as the scaffolding proteins B and D. Provirions are formed by packaging of DNA together with the small internal J proteins, while losing at least some of the B scaffolding proteins. Eventually, loss of the D scaffolding proteins and the remaining B proteins leads to the formation of mature virions. RESULTS: phi X174 108S 'procapsids' have been purified in milligram quantities by removing 114S (mature virion) and 70S (abortive capsid) particles from crude lysates by differential precipitation with polyethylene glycol. 132S 'provirions' were purified on sucrose gradients in the presence of EDTA. Cryo-electron microscopy (cryo-EM) was used to obtain reconstructions of procapsids and provirions. Although these are very similar to each other, their structures differ greatly from that of the virion. The F and G proteins, whose atomic structures in virions were previously determined from X-ray crystallography, were fitted into the cryo-EM reconstructions. This showed that the pentamer of G proteins on each five-fold vertex changes its conformation only slightly during DNA packaging and maturation, whereas major tertiary and quaternary structural changes occur in the F protein. The procapsids and provirions were found to contain 120 copies of the D protein arranged as tetramers on the two-fold axes. DNA might enter procapsids through one of the 30 A diameter holes on the icosahedral three-fold axes. CONCLUSIONS: Combining cryo-EM image reconstruction and X-ray crystallography has revealed the major conformational changes that can occur in viral assembly. The function of the scaffolding proteins may be, in part, to support weak interactions between the structural proteins in the procapsids and to cover surfaces that are subsequently required for subunit-subunit interaction in the virion. The structures presented here are, therefore, analogous to chaperone proteins complexed with folding intermediates of a substrate.

Bacteriophage phi X 174↗
PubMed1999

ATP depletion blocks herpes simplex virus DNA packaging and capsid maturation.

During herpes simplex virus (HSV) assembly, immature procapsids must expel their internal scaffold proteins, transform their outer shell to form mature polyhedrons, and become packaged with the viral double-stranded (ds) DNA genome. A large number of virally encoded proteins are required for successful completion of these events, but their molecular roles are poorly understood. By analogy with the dsDNA bacteriophage we reasoned that HSV DNA packaging might be an ATP-requiring process and tested this hypothesis by adding an ATP depletion cocktail to cells accumulating unpackaged procapsids due to the presence of a temperature-sensitive lesion in the HSV maturational protease UL26. Following return to permissive temperature, HSV capsids were found to be unable to package DNA, suggesting that this process is indeed ATP dependent. Surprisingly, however, the display of epitopes indicative of capsid maturation was also inhibited. We conclude that either formation of these epitopes directly requires ATP or capsid maturation is normally arrested by a proofreading mechanism until DNA packaging has been successfully completed.

Adenosine Triphosphate↗
PubMed1995

A defined system for in vitro lambda DNA packaging.

We constructed a defined in vitro system for packaging lambda DNA which is composed of purified proheads, the noncapsid proteins terminase and gpFI, and the Escherichia coli DNA binding/bending protein IHF. The defined packaging system: (i) is free from endogenous ATP, DNAs, and DNases and (ii) packages 30% of the input mature lambda DNA efficiently. In this defined packaging system, IHF and gpFI make modest contributions to packaging efficiency. The defined packaging reactions showed that DNA packaging gave a linear response to the concentration of mature lambda DNA and terminase. DNA packaging showed a sigmoidal relationship with respect to the concentration of ATP and proheads.

Adenosine Triphosphate↗
PubMed1990

Bacteriophage T7 DNA packaging. II. Analysis of the DNA sequences required for packaging using a plasmid transduction assay.

Recombinant plasmids carrying a bacteriophage T7 origin of DNA replication and sequences from the T7 concatemer junction are efficiently packaged into transducing particles during phage infection. With some constructs, as many as 50 transducing particles are produced per infected cell. We have used this plasmid packaging system to determine which T7 DNA sequences are required for the processing and packaging of the plasmid concatemers and to investigate the effects of altering the spacing and orientation of the required sequences. An origin of T7 DNA replication is essential for high-efficiency transduction, presumably to form the plasmid concatemers that are the substrates of the packaging reaction. In addition, two short sequences from the concatemer junction are required, one flanking the site where the right end of T7 DNA is formed (pacR) and the other flanking the site for formation of the left end (pacL). The spacing between pacR and pacL is not important, but the sequences must be positioned in the same orientation on the plasmid. With certain deletions of pacL, the specificity of end formation is reduced but the efficiency of packaging is near normal. Plasmids that contain only one of the two pac sites are packaged at about 10% of the efficiency of those with both sites. The residual packaging of these plasmids results from regeneration of the other packaging site by recombination with T7 phage DNA. To function in plasmid packaging, the sequences from the concatemer junction must be positioned on the plasmid in the same orientation relative to the T7 replication origin as is found in T7 DNA. This apparently results from a requirement for transcription through these sequences in the rightward direction from the T7 promoter that is associated with the replication origin. Such transcription from another T7 promoter (phi 10), that is not itself a replication origin, allows packaging when the origin is in the opposite orientation.

Base Sequence↗
PubMed1998

Cellular components interact with adenovirus type 5 minimal DNA packaging domains.

Adenovirus type 5 DNA packaging is initiated from the left end of the viral genome and depends on the presence of a cis-acting packaging domain located between nucleotides 194 and 380. Multiple redundant packaging elements (termed A repeats I through VII [AI through AVII]) are contained within this domain and display differential abilities to support DNA packaging in vivo. The functionally most important repeats, AI, AII, AV, and AVI, follow a bipartite consensus motif exhibiting AT-rich and CG-rich core sequences. Results from previous mutational analyses defined a fragment containing AV, AVI, and AVII as a minimal packaging domain in vivo, which supports a functional independence of the respective cis-acting sequences. Here we describe multimeric versions of individual packaging elements as minimal packaging domains that can confer viability and packaging activity to viruses carrying gross truncations within their left end. These mutant viruses directly rate the functional role that different packaging elements play relative to each other. The A repeats are likely to be binding sites for limiting, trans-acting packaging factors of cellular and/or viral origin. We report here the characterization of two cellular binding activities interacting with all of the minimal packaging domains in vitro, an unknown binding activity termed P-complex, and the transcription factor chicken ovalbumin upstream promoter transcription factor. The binding of both activities is dependent on the integrity of the AT-rich, but not the CG-rich, consensus half site. In the case of P-complex, binding affinity for different minimal packaging domains in vitro correlates well with their abilities to support DNA packaging in vivo. Interestingly, P-complex interacts not only with packaging elements but also with the left terminus of the viral genome, the core origin of replication. Our data implicate cellular factors as components of the viral packaging machinery. The dual binding specificity of P-complex for packaging and replication sequences may further suggest a direct involvement of left-end replication sequences in viral DNA encapsidation.

Adenoviruses, Human↗