Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “DNA packaging”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
PubMed1988

Packaging of DNA in cricket sperm. A compact mode of DNA packaging.

The packaging of DNA in the sperm of the house cricket (Gryllus bimaculatus) was investigated by microscopical and diffraction methods. The principle of DNA packaging in the cricket sperm is parallel bundling. This is in contrast with that in somatic cells, which assumes successive supercoiling. About 240 threads of DNA are bundled into one 300 A fiber, and then more than 200 fibers (300 A) are packed in a parallel manner in one nucleus. Therefore, DNA is oriented so that its helix axis is parallel with the long axis of the nucleus. This simple packaging of DNA is maintained by a newly discovered protein, 17 K protein; no histones were found. The packaging ratio (the ratio of the volume of DNA to that of the suprastructure) of the chromatin is about 1 and shows an effectiveness much higher than that of the nucleosome solenoid structure. The mode of packaging DNA in cricket sperm is different from the nucleosome structure, and is a quite new type of packaging.

Animals↗
PubMed1985

DNA packaging of bacteriophage T4 proheads in vitro. Evidence that prohead expansion is not coupled to DNA packaging.

We developed a system for DNA packaging of isolated bacteriophage T4 proheads in vitro and studied the role of prohead expansion in DNA packaging. Biologically active proheads have been purified from a number of packaging-deficient mutant extracts. The cleaved mature prohead is the active structural precursor for the DNA packaging reaction. Packaging of proheads requires ATP, Mg2+ and spermidine, and is stimulated by polyethylene glycol and dextran. Predominantly expanded proheads (ELPs) are produced at 37 degrees C and predominantly unexpanded proheads (ESPs) are produced at 20 degrees C. Both the expanded and unexpanded proheads are active in DNA packaging in vitro. This is based on the observations that (1) both ESPs and ELPs purified by chromatography on DEAE-Sephacel showed DNA packaging activity; (2) apparently homogeneous ELPs prepared by treatment with sodium dodecyl sulfate (which dissociates ESPs) retained significant biological activity; (3) specific precipitation of ELPs with anti-hoc immunoglobulin G resulted in loss of DNA packaging activity; and (4) ESPs upon expansion in vitro to ELPs retained packaging activity. Therefore, contrary to the models that couple DNA packaging to head expansion, in T4 the expansion and packaging appear to be independent, since the already expanded DNA-free proheads can be packaged in vitro. We therefore propose that the unexpanded to expanded prohead transition has evolved to stabilize the capsid and to reorganize the prohead shell functionally from a core-interacting to a DNA-interacting inner surface.

Adenosine Triphosphate↗
PubMed1992

Transcription dependence of DNA packaging of bacteriophages T3 and T7.

T3 and T7 phages package homologous DNA more efficiently than heterologous DNA and recombinant plasmids carrying DNA sequences necessary for DNA packaging (pac sequence). The pac sequence contains a promoter for phage RNA polymerase and transcription from the promoter is necessary for DNA packaging. T3 and T7 RNA polymerases are stringently specific for their own promoters. To examine the relationship between DNA packaging and transcription, we constructed a cleared in vitro system for packaging T3 or T7 DNA containing an ammonium sulfate fractionate of a high-speed supernatant of phage-infected cells. In the system, DNA packaging required GTP and was inhibited by the 3'-deoxy analog of GTP, ATP, or CTP. The DNA packaging activity paralleled the transcriptional activity, assayed by incorporation of [32P]UTP into acid-insoluble material. In the system, homologous DNA was packaged more efficiently than heterologous DNA, but heterologous DNA was packaged as efficiently as homologous DNA by the addition of heterologous phage RNA polymerase, demonstrating that the transcriptional specificity determines the DNA packaging specificity of T3 and T7.

Bacteriophage T7↗
PubMed1992

Molecular genetic analysis of bacteriophage P22 gene 3 product, a protein involved in the initiation of headful DNA packaging.

Bacteriophage P22 DNA packaging events occur in processive series on concatemeric phage DNA molecules. At the point where such series initiate, the DNA is recognized at a site called pac, and most molecular left ends are generated within six short regions called end sites, which are present in a 120 base-pair region surrounding the pac site. The bacteriophage P22 genes 2 and 3 proteins are required for successful generation of these ends and DNA packaging during progeny virion assembly. Mutants lacking the 162-amino-acid gene 3 protein replicate DNA and assemble functional procapsids. In this report we describe the nucleotide changes and DNA packaging phenotypes of a number of missense mutations of gene 3, which give the phage a higher than normal frequency of generalized transduction. In cells infected by these mutants, more packaging events initiate on the host chromosome than in wild-type infections, so the mutations are thought to affect the specificity of packaging initiation. In addition to having this phenotype, these mutations affect the process of phage DNA packaging in detectable ways. They may: (1) alter the target site specificity for packaging; (2) make target site recognition more promiscuous; (3) affect end site utilization; (4) alter the pac site; and (5) cause apparent random DNA packaging series initiation on phage DNA.

Bacteriophage P22↗
PubMed1985

Isolation and characterization of bacteriophage T3/T7 hybrids and their use in studies on molecular basis of DNA-packaging specificity.

In vitro DNA-packaging systems of bacteriophages T3 and T7 packaged homologous DNA more efficiently than heterologous DNA. Packaging of phage DNA proceeds by way of concatemeric intermediates (H. Fujisawa, J. Miyazaki, and T. Minagawa (1978), Virology 87, 394-400). The conversion of mature homologous and heterologous DNAs to concatemers was efficient in both the T3- and T7-packaging systems. In vitro complementation experiments indicate that the gene 19 product (gp19) specifies which DNA enters the capsid. To identify DNA regions recognized by the packaging systems, T3/T7 hybrids were constructed and physical maps of the hybrid DNAs were determined by restriction enzyme analysis. By comparing restriction maps and in vitro packaging of hybrid DNAs, it is concluded that the sequence responsible for specificity of DNA packaging is confined within 5% of the ends of the T3 and T7 genomes.

Base Sequence↗
PubMed1991

sRNA of phage phi 29 of Bacillus subtilis mediates DNA packaging of phi 29 proheads assembled in Escherichia coli.

The structural genes of the prohead of phage phi 29 of Bacillus subtilis and a small phi 29 RNA (sRNA) were cloned and expressed in Escherichia coli individually or in combination to study the role of the sRNA in prohead assembly and the mechanism of prohead morphogenesis. The genes coding for the proteins of the scaffold (gp7), the capsid (gp8), the portal vertex (gp10), and the dispensable head fiber (gp8.5) were expressed in E. coli and the gene products were assembled, with and without the presence of the sRNA, into uniform and prolate particles that resembled the typical native phi 29 prohead. No differences in particle size and shape were found between the particles of 7-8-8.5-10 (scaffold-capsid-fiber-portal vertex) and 7-8-8.5-10-RNA (scaffold-capsid-fiber-portal vertex-RNA), suggesting that the phi 29 sRNA was not required for phi 29 prohead assembly. The 7-8-8.5-10 particles produced in E. coli in the absence of phi 29 sRNA were fully competent to package phi 29 DNA in the defined in vitro DNA packaging system by the addition of purified sRNA. Moreover, these DNA-filled heads were assembled into infectious virions in extracts. Without the addition of the sRNA, the 7-8-8.5-10 particles were incompetent while the 7-8-8.5-10-RNA particles were competent in DNA packaging. Bacterial sRNA present in E. coli cannot substitute for the phi 29 sRNA. The assembly of prohead particles in E. coli indicated that host factors unique to B. subtilis were not required. The evidence that the phi 29 sRNA was not required for phi 29 prohead assembly and was not a fixed structural component of the phi 29 prohead favors the conclusion that the phi 29 sRNA is a specific enzyme or morphogenetic factor in DNA packaging.

Bacillus subtilis↗
PubMed1992

DNA packaging induced by micellar aggregates: a novel in vitro DNA condensation system.

Evidence for a conceptually novel DNA packaging process is presented. X-ray scattering, electron microscopy, and circular dichroism measurements indicate that in the presence of positively charged micellar aggregates and flexible anionic polymers, such as negatively charged polypeptides or single-stranded RNA species, a complex is formed in which DNA molecules are partially embedded within a micellar scaffold and partially condensed into highly packed chiral structures. Based on studies of micelle-DNA and micelle-flexible anionic polymer systems, as well as on the known effects of a high charge density upon the micellar organization, a DNA packaging model is proposed. According to this model, the DNA induces the elongation of the micelles into rodlike aggregates, forming a closely packed matrix in which the DNA molecules are immobilized. In contrast, the flexible anionic polymers stabilize clusters of spherical micelles which are proposed to effect a capping of the rodlike micelles, thus arresting their elongation and creating surfactant-free segments of the DNA that are able to converge and collapse. Thus, unlike other in vitro DNA packaging systems, in which condensation follows encounters between charge-neutralized DNA molecules, a prepackaging phase where the DNA is immobilized within a matrix is proposed in this case. Cellular and nuclear membranes have been implicated in DNA packaging processes in vivo, and negatively charged polyelectrolytes were shown to be involved in the processes. These observations, combined with the basic tenets of the DNA condensation system described here, allow for the progression to the study of more elaborate model systems and thus might lead to insights into the nature and roles of the intricate in vivo DNA-membrane complexes.

Circular Dichroism↗
PubMed1990

Phylogenetic analysis and secondary structure of the Bacillus subtilis bacteriophage RNA required for DNA packaging.

An unusual RNA molecule encoded by the Bacillus subtilis bacteriophage phi 29 is a structural component of the viral prohead and is required for the ATP-dependent packaging of DNA. Here we report a model of secondary structure for this prohead RNA developed from a phylogenetic analysis of the primary sequences of prohead RNAs of related phages. Twenty-nine phages related to phi 29 were found to produce prohead RNAs. These RNAs were analyzed by their ability to replace phi 29 RNA in in vitro phage assembly, by Northern blot hybridization with a probe complementary to phi 29 RNA, and by partial and complete sequence analyses. These analyses revealed four quite different sequences ranging in length from 161 to 174 residues. The secondary structure deduced from these sequences, in agreement with earlier observations, indicated that prohead RNA is organized into two domains. The larger 5'-domain (Domain I) is composed of 113-117 residues and contains four helices. Three of these helices appear to be organized into a central stem that is interrupted by two unpaired loops and the fourth helix and loop. The smaller 3'-domain (Domain II) is composed of 40-44 residues and consists of two helices. Domains I and II are separated by 8-13 unpaired residues. Nuclease cleavage occurs readily in this single-stranded joining region, and this cleavage allows the subsequent separation of the two RNA domains. The separated Domain I is fully active in DNA packaging in vitro. The functional significance and biological role of Domain II are unknown. The phylogenetic secondary structure model provides a basis for further analysis of the role of this RNA in bacteriophage morphogenesis.

Bacillus subtilis↗
PubMed1990

Bacteriophage T7 DNA packaging. II. Analysis of the DNA sequences required for packaging using a plasmid transduction assay.

Recombinant plasmids carrying a bacteriophage T7 origin of DNA replication and sequences from the T7 concatemer junction are efficiently packaged into transducing particles during phage infection. With some constructs, as many as 50 transducing particles are produced per infected cell. We have used this plasmid packaging system to determine which T7 DNA sequences are required for the processing and packaging of the plasmid concatemers and to investigate the effects of altering the spacing and orientation of the required sequences. An origin of T7 DNA replication is essential for high-efficiency transduction, presumably to form the plasmid concatemers that are the substrates of the packaging reaction. In addition, two short sequences from the concatemer junction are required, one flanking the site where the right end of T7 DNA is formed (pacR) and the other flanking the site for formation of the left end (pacL). The spacing between pacR and pacL is not important, but the sequences must be positioned in the same orientation on the plasmid. With certain deletions of pacL, the specificity of end formation is reduced but the efficiency of packaging is near normal. Plasmids that contain only one of the two pac sites are packaged at about 10% of the efficiency of those with both sites. The residual packaging of these plasmids results from regeneration of the other packaging site by recombination with T7 phage DNA. To function in plasmid packaging, the sequences from the concatemer junction must be positioned on the plasmid in the same orientation relative to the T7 replication origin as is found in T7 DNA. This apparently results from a requirement for transcription through these sequences in the rightward direction from the T7 promoter that is associated with the replication origin. Such transcription from another T7 promoter (phi 10), that is not itself a replication origin, allows packaging when the origin is in the opposite orientation.

Base Sequence↗
PubMed1990

RNA dependence of the bacteriophage phi 29 DNA packaging ATPase.

The activity of the DNA packaging adenosine triphosphatase (ATPase) of the Bacillus subtilis bacteriophage phi 29 is dependent upon prohead RNA. The 174 nucleotide viral-encoded RNA is positioned on the head-tail connector at the portal vertex of the phi 29 precursor shell (prohead). Here, the RNA interacts with the ATP-binding gene 16 product (gp16) to constitute the DNA-packaging ATPase and initiate DNA packaging in vitro. Both the prohead connector (gene 10 product, gp10) and gp16 may utilize an RNA recognition motif characteristic of a number of RNA-associated proteins, and the binding of gp16 by proheads shields the prohead RNA from RNase A. The ATPase activity of gp16 is stimulated fourfold by RNA and tenfold by proheads with RNA. RNA is needed continuously for the gp16/RNA ATPase activity and is essential for the gp16/prohead ATPase activity. The prohead, with its connector, RNA and associated gp16 in an assembly-regulated configuration, hydrolyzes ATP and drives phi 29 DNA translocation.

Adenosine Triphosphatases↗
PubMed1987

Early events in DNA packaging in a defined in vitro system of bacteriophage T3.

We have developed a defined in vitro system for packaging phage T3 DNA which is composed of purified proheads and the noncapsid proteins gp18 and gp19, products of genes 18 and 19. The reaction requires Mg2+, ATP, and polyethylene glycol and is inhibited by a nonhydrolyzable ATP analog, adenosine-5'-O-(3'-thiotriphosphate) (ATP-gamma-S) (K. Hamada, H. Fujisawa, and T. Minagawa, 1986, Virology 151, 119-123). About 30% of added mature T3 DNA was packaged into heads in the defined system. A complex with a sedimentation coefficient of about 50 S (50 S complex) accumulated in the reaction mixture containing ATP-gamma-S. The 50 S complex was DNase sensitive and was converted to filled heads by a second reaction in the presence of ATP without addition of DNA, proheads, gp18, and gp19. These results indicate that during early stages of DNA packaging, formation of precursor complexes proceeds by an allosteric mechanism with ATP acting as effector. The movement of DNA into the head is driven by the energy released by hydrolysis of ATP. gp18 formed a complex with DNA without addition of ATP-gamma-S and gp19. gp18-DNA complex was DNase sensitive and did not bind gp19; it was converted to filled heads by way of a second reaction after addition of ATP, gp19, and proheads. gp19 formed a functional complex with prohead in the presence of ATP-gamma-S or ATP. The complex did not bind gp18 but was converted to filled heads by incubation with ATP, gp18, and DNA. In the absence of ATP-gamma-S, gp19 formed complexes with prohead that were abortive in DNA packaging. Formation of the 50 S complex occurred in a reaction mixture containing gp18-DNA and gp19-prohead complexes in the presence of ATP-gamma-S. From these results, we propose details of the molecular mechanism of DNA packaging in the defined in vitro system.

Adenosine Triphosphate↗
PubMed1985

DNA packaging by the Bacillus subtilis defective bacteriophage PBSX.

Defective bacteriophage PBSX, a resident of all Bacillus subtilis 168 chromosomes, packages fragments of DNA from all portions of the host chromosome when induced by mitomycin C. In this study, the physical process for DNA packaging of both chromosomal and plasmid DNAs was examined. Discrete 13-kilobase (kb) lengths of DNA were packaged by wild-type phage, and the process was DNase I resistant and probably occurred by a head-filling mechanism. Genetically engineered isogenic host strains having a chloramphenicol resistance determinant integrated as a genetic flag at two different regions of the chromosome were used to monitor the packaging of specific chromosomal regions. No dramatic selectivity for these regions could be documented. If the wild-type strain 168 contains autonomously replicating plasmids, especially pC194, the mitomycin C induces an increase in size of resident plasmid DNA, which is then packaged as 13-kb pieces into phage heads. In strain RB1144, which lacks substantial portions of the PBSX resident phage region, mitomycin C treatment did not affect the structure of resident plasmids. Induction of PBSX started rolling circle replication on plasmids, which then became packaged as 13-kb fragments. This alteration or cannibalization of plasmid replication resulting from mitomycin C treatment requires for its function some DNA within the prophage deletion of strain RB1144.

Bacillus subtilis↗
PubMed1992

Conformation of DNA packaged in bacteriophage T7. Analysis by use of ultraviolet light-induced DNA-capsid cross-linking.

The conformation of the linear, double-stranded, 39,936 kilobase-pair DNA packaged in the protein capsid of bacteriophage T7 is investigated here by use of short wavelength ultraviolet light-induced DNA-capsid cross-linking. To detect both DNA-capsid and DNA-DNA cross-links, DNA is expelled from the T7 capsid and the products of expulsion are analyzed by use of Nycodenz buoyant density centrifugation, followed by either pulsed field gel electrophoresis or invariant field gel electrophoresis. Short wavelength ultraviolet light is found to progressively induce both DNA-DNA and DNA-protein cross-links in intact bacteriophage T7, but not in T7 from which DNA had been expelled before exposure to ultraviolet light. Protein-protein cross-links are not induced. When DNA expelled from previously cross-linked T7 is cleaved with restriction endonuclease (1 to 3 sites cleaved), analysis of the resulting fragments reveals no regions on T7 DNA that are excluded from cross-linking to the capsid. However, the efficiency of cross-linking decreases as the distance from the left end (last end packaged) of the packaged DNA increases. Electron microscopy of negatively stained capsid-DNA complexes reveals no DNA-retaining structure other than the outer shell of the capsid. Together with previously reported data that indicate lack of protein-based specificity for ultraviolet light-induced cross-linking, these observations are interpreted by the assumptions that, within the limits of resolution of these experiments: (1) no region of packaged T7 DNA is excluded from contact with the outer shell of the T7 capsid; (2) the probability of contacting the outer shell decreases as the distance from the left end of packaged T7 DNA increases. Thus, T7 DNA packaging concentrates the last end packaged near the inner surface of the outer shell of the T7 capsid.

Capsid↗
PubMed1985

Ion etching bacteriophage T4: support for a spiral-fold model of packaged DNA.

Ion etching of bacteriophage T4 erodes virus components progressively from the outside to the inside while preserving the overall structure. The terminal portion of the T4 DNA molecule packaged can be specifically radiolabeled and was found to be eroded more rapidly than the remainder of the DNA. This strongly suggests that the first DNA to enter the prohead is condensed in the center of the capsid and is therefore shielded from the ion beam by the surrounding last packaged DNA. The results support a "spiral-fold" model for the arrangement of DNA within the icosahedral bacteriophage head. According to this model, phage T4 DNA strands run parallel to the long axis of the phage, with sharp (180 degrees) bends at the top and bottom of the capsid. The folds themselves are arranged radially about the long axis of the head in spirally organized shells.

DNA, Viral↗
PubMed1978

Visualization of the intracellular development of bacteriophage lambda, with special reference to DNA packaging.

To reveal intermediates in lambda DNA packaging, infected cells were osmotically ruptured and the cell lysates were deposited on electron microscope grids by sedimentation through a sucrose/formalin cushion. A fixation procedure that crosslinks head-related structures to DNA allowed us to study successive stages in the process of head filling. Three types of head-related structures can be distinguished: (i) empty heads (petit lambda), less angular in outline than complete lambda heads; (ii) heads partially filled with DNA (partially filled heads), having a roundish outline; and (iii) particles tightly packed with DNA (full heads), having a hexagonal outline. DNA-head complexes were bound either at the terminal end of a DNA thread or at a point intermediate along the thread. The terminal complexes were more abundant. No head-related structures could be found in an induced lambda mutant lysogen blocked in the synthesis of petit lambda (amber in lambda gene E). One type of mutant blocked in DNA packaging (amber in gene A) produces empty heads and free tails, whereas another (amber in gene D) produces partially filled heads in addition. Our data suggest that a DNA-petit lambda complex may be an early intermediate in packaging and that the lambda DNA substrate can be a cohesive-ended concatemer or a concatemer with double-stranded cohesive site sequences.

Coliphages↗
PubMed1991

Nucleotide sequence of the bacteriophage P22 genes required for DNA packaging.

The mechanism of DNA packaging by dsDNA viruses is not well understood in any system. In bacteriophage P22 only five genes are required for successful condensation of DNA within the capsid. The products of three of these genes, the portal, scaffolding, and coat proteins, are structural components of the precursor particle, and two, the products of genes 2 and 3, are not. The scaffolding protein is lost from the structure during packaging, and only the portal and coat proteins are present in the mature virus particle. These five genes map in a contiguous cluster at the left end of the P22 genetic map. Three additional genes, 4, 10, and 26, are required for stabilizing of the condensed DNA within the capsid. In this report we present the nucleotide sequence of 7461 bp of P22 DNA that contains the five genes required for DNA condensation, as well as a nonessential open reading frame (ORF109), gene 4, and a portion of gene 10. N-terminal amino acid sequencing of the encoded proteins accurately located the translation starts of six genes in the sequence. Despite the fact that most of these proteins have striking analogs in the other dsDNA bacteriophage groups, which perform highly analogous functions, no amino acid sequence similarity between these analogous proteins has been found, indicating either that they diverged a very long time ago or that they are the products of spectacular convergent evolution.

Amino Acid Sequence↗
PubMed1986

Synthesis of bacteriophage phi X174 in vitro: mechanism of switch from DNA replication to DNA packaging.

Replication of a replicative form DNA of bacteriophage phi X174 initiates by rolling-circle synthesis of the viral DNA followed by discontinuous synthesis of the complementary DNA. Gene C protein of phi X174, which is involved in DNA packaging, inhibits the rolling-circle DNA synthesis by binding to the initiation complex in vitro. The gene C protein-associated initiation complex can synthesize and package the viral DNA to produce infectious phage when supplemented with phi X174 gene J protein and the prohead. Multiple rounds of phage synthesis occur without dissociation of the gene C protein from the complex. These results indicate that gene C protein is central in the switch from replication of a replicative form DNA to synthesis and concomitant packaging of viral DNA into phage capsid, which occurs in the late stage of infection.

Bacteriophage phi X 174↗