Search PubMed⌕ Search

PubMed · 9496679

Flow through, immunomagnetic cell separation.

Abstract

A brief, process-oriented overview of immunologically based cell separation technology is presented. In addition, the design and preliminary experimental data of two unique flow-through immunomagnetic cell separation devices are presented. The first design is based on a dipole magnetic field, while the second design is basis on a quadrupole magnetic field. The dipole design can "fractionate" an inlet, magnetically labeled, cell stream into different outlet streams on the basis of the degree to which the cell is immunomagnetically labeled. The quadrupole separator splits an inlet, immunomagnetically labeled, cell stream into two outlet streams in which the purity, recovery, and potentially the degree to which the cells are immunomagnetically labeled is controlled by the flow rates in the inlet and outlet flows. A 99% purity and 86% recovery have been achieved with this system. Some distinct advantages of these two systems are the potential of high purity, recovery, and throughput at a cost which is potentially significantly lower than current, comparable technologies.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J J Chalmers, M Zborowski, L Sun, L Moore. Flow through, immunomagnetic cell separation.. https://doi.org/10.1021/bp970140l

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Removal of nitrate from water by electroreduction and electrocoagulation.

The aim of this work was to investigate the feasibility of the removal of nitrate from water by applying electrochemical methods such as electroreduction and electrocoagulation. In electroreduction, removal of nitrate to an allowable concentration has been accomplished at the pH range of 5-7 with energy consumption value of 1 x 10(-3) kWh g(-1). In electrocoagulation, an allowable concentration of nitrate has been achieved at the pH range of 9-11 with energy consumption value of 0.5 x 10(-4) kWh g(-1). Full removal of nitrate was also possible but with higher energy consumptions for these two methods.

Electrochemistry↗

Electroytic partial fluorination of organic compounds. 52. Regio- and diastereoselective anodic fluorination of thiazolidines.

Anodic fluorination of N-benzoyl, N-acethyl-, and N-formylthiazolidine derived from L-cysteine was carried out in dimethoxyethane (DME) and acetonitrile containing various supporting fluoride salts using an undivided cell. Highly regioselective fluorination proceeded to provide the corresponding 5-monofluorinated thiazolidine derivatives in good yields in DME, and the diastereoselectivitiy was moderate to high regardless of the supporting fluoride salts. The diastereoselectivitiy of the fluorination was greatly affected by the bulkyness of the subsitituent on the nitrogen atom, and N-benzoylthiazolidine gave much higher diastereoselectivity compared with N-formyl derivative. The fluorination of the thiazolidines was not achieved by commercially available fluorinating reagents such as N-fluoropyridinium salts.

Electrochemistry↗