Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Electrochemistry”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

Towards combined electrochemistry and surface-enhanced resonance Raman of heme proteins: Improvement of diffusion electrochemistry of cytochrome c at silver electrodes chemically modified with 4-mercaptopyridine.

To date, a successful combination of surface-enhanced resonance Raman spectroscopy (SERRS) and electrochemistry to study heme proteins is inhibited by the problems raised by the prerequisite to use silver as electrode metal. This paper indicates an approach to overcome these problems. It describes a quick and reproducible procedure to prepare silver electrodes chemically modified with 4-mercaptopyridine suitable to perform diffusion electrochemistry of cytochrome c (cyt c). The method involves the employment of a mechanical and a chemical treatment and avoids the use of alumina slurries and any electrochemical pretreatment. Cyclic voltammetry (CV) was used to test the electrochemical response of cyt c, and the CV signals were found identical with those obtained on gold electrodes under the same experimental conditions. Compared to previous literature, a significant improvement of the CV signal of cyt c at silver electrodes was achieved. Preliminary results show that this treatment can be also successfully employed for the preparation of SERRS-active electrodes.

Animals↗

An interface comprising molecular wires and poly(ethylene glycol) spacer units self-assembled on carbon electrodes for studies of protein electrochemistry.

The characterization and application of a modified electrode interface for protein electrochemistry is reported. This generic interface is composed of a mixed monolayer of oligo(phenylethynylene) molecular wires (MWs) and poly(ethylene glycol) (PEG) deposited on glassy carbon electrodes by reductive adsorption of the respective aryl diazonium salts. Electrochemistry and scanning electron microscopy demonstrate that the PEG component exhibits a distinct decrease in nonspecific adsorption of blood serum and the proteins bovine serum albumin (BSA) and horseradish peroxidase (HRP) relative to a bare glassy carbon electrode. The ability of the MWs to facilitate efficient electron transfer through the PEG layer to the underlying electrode was demonstrated by covalently attaching ferrocenemethylamine to the end of the MWs. The calculated rate constant for this system was 229 +/- 30 s(-1). Covalent attachment of HRP to the MWs allowed direct electron transfer to the redox protein with almost ideal electrochemistry, indicating a specific interaction between the MW and HRP, with a rate constant of 13.4 +/- 2.3 s(-1). This rate constant is more rapid than previously reported for HRP shown to still be catalytically active. Retained catalytic activity of HRP was demonstrated by the enzyme responding to the addition of hydrogen peroxide. Similarly, by attaching myoglobin to the end of the MWs, a rate constant for this protein of 2 s(-1) was measured. The rigidity of the MWs, as well as it being longer than the PEG diluent, means this generic interface can be employed to investigate the electrochemistry of a wide range of redox proteins.

Carbon↗

Brain acetaminophen measurement by in vivo dialysis, in vivo electrochemistry and tissue assay: a study of the dialysis technique in the rat.

After peripheral injections of the electrochemically active drug acetaminophen, striatal levels of the drug were measured in 3 different ways: in vivo electrochemistry, in vivo dialysis, and tissue assay. The time course of the acetaminophen concentrations measured by in vivo dialysis paralleled the in vivo electrochemistry curve and lagged behind the peak tissue concentration. This result suggests that dialysis and electrochemistry provide equivalent measurements of extracellular fluid acetaminophen. In vitro, dialysis recovery of acetaminophen was 28% of the beaker concentration.

Acetaminophen↗

Characterization of solution-phase and gas-phase reactions in on-line electrochemistry-thermospray tandem mass spectrometry.

Electrochemistry was used on-line with high-performance liquid chromatography-thermospray tandem mass spectrometry to provide insight into the solution-phase decomposition reactions of electrochemically generated oxidation products. Products formed during electrooxidation were monitored as the electrode potential was varied. The solution reactions which follow the initial electron transfer at the electrode are affected by the vaporizer tip temperature of the thermospray probe and the composition of the thermospray buffer. Either hydrolysis or ammonolysis reactions of the initial electrochemical oxidation products can occur with pH 7 ammonium acetate buffer. Both the electrochemically generated and the synthesized disulfide of 6-thiopurine decompose under thermospray conditions to produce 6-thiopurine and purine-6-sulfinate. Solution-phase studies indicate that nucleophilic and electrophilic substitution reactions with purine-6-sulfinate result in the formation of purine, adenine, and hypoxanthine. Products were identified and characterized by tandem mass spectrometry. This work shows the first example of high-performance liquid chromatography used on-line with electrochemistry to separate stable oxidation products prior to analysis by thermospray tandem mass spectrometry. In addition, solution-phase and gas-phase studies with methylamine show that the site of the nucleophilic and electrophilic reactions is probably inside the thermospray probe. Most importantly, these results also show that the on-line combination of electrochemistry with thermospray tandem mass spectrometry provides valuable information about redox and associated chemical reactions of biological molecules such as the structures of intermediates or products as well as providing insight into reaction pathways.

Adenine↗

Biomedical applications of liquid chromatography-electrochemistry.

Liquid chromatography-electrochemistry has proven to be a viable tool for solving a wide variety of practical analytical problems, primarily in biomedical research. Over 2000 papers have appeared and over 20 manufacturers participate in this area. In spite of these obvious measures of acceptance, there continues to be a general lack of understanding of how these systems work. This naturally stems from the unfamiliarity of chromatographers with electrochemistry and electrochemists with chromatography. Furthermore, there are aspects of both which are not yet understood in molecular detail by anyone. While there is more work to do to optimize the technique, liquid chromatography-electrochemistry clearly is very useful at its present state of development. This article presents an overview of the technology and more recently developed applications. Emphasis is placed on the chromatograph as a whole, dual-channel detectors, microdialysis sampling for in vivo determinations, derivatization and post-column reactions, and studies of xenobiotic metabolism.

Amino Acids↗

Direct electrochemistry of proteins. Investigations of yeast cytochrome c mutants and their complexes with cytochrome b5.

Direct electrochemistry of site-specific mutants of yeast iso-1-cytochrome c (cyt c) and their complexes with bovine cytochrome b5 (cyt b5) has been investigated at edge-plane pyrolytic graphite (EPG) and bis(4-pyridyl)-disulphide-modified gold electrodes. Structure/function relationships have been investigated with the particular aim of clarifying the factors controlling the interactions of proteins at electrode/electrolyte interfaces and the determinants for direct electrochemistry in ternary protein/protein/electrode adducts, e.g. cyt c/cyt b5/EPG. Investigations of the cyt c mutants alone revealed a variety of electrochemical responses: all the mutants show similar voltammetric reversibility at modified gold electrodes, whereas at EPG electrodes the reversibility follows the order: Asn52Ile-Cys102Thr greater than Cys102Thr greater than Asn52Ala-Cys102Thr. Mid-point potentials follow the order: Arg13Ile (+60 +/- 5 mV vs. standard calomel electrode) greater than Cys102Thr (+40 +/- 5 mV) greater than Lys27Gln (+30 +/- 5 mV) approximately Lys72Asp (+30 +/- 5 mV) greater than Asn52Ala-Cys102Thr (+15 +/- 5 mV) greater than Asn52Ile-Cys102Thr (-10 +/- 5 mV). The structural basis for these differences is briefly discussed. When these mutants are bound to cyt b5, the differences in electrochemical response are greatly enhanced in the ternary cyt c/cyt b5/EPG adducts. A minimal analysis of these differences supports a model of multiple overlapping binding and recognition domains on cyt c which may be finely tuned to allow ternary complex formation so that a single-site variation could modify or abolish direct electrochemistry in the ternary adduct.

Animals↗

Construction and electrochemistry of Langmuir-Blodgett films of fullerene lipid composite/hybrid materials.

Studies of the electrochemistry of Langmuir-Blodgett (LB) films of C70/artificial lipids including tridodecylmethylammonium bromide (3C12N+Br-, 1), didodecylphosphate (2C12PO4H, 2), and dioleoylphosphatidylcholine (DOPC, 3) and of LB films of a fullerene lipid (4) bearing triple alkyl chains on a C60 moiety on electrodes were carried out in aqueous media. Stable Langmuir monolayers of fullerene C70/artificial lipid composites and the fullerene lipid (4) were formed at the air-water interface and these monolayers were transferred onto electrodes as LB films. Here, we focus on the importance of cationic matrix lipid films to the facile electrochemistry of C70 embedded in a LB film of cationic lipids on an electrode in aqueous media. On the basis of the electrolyte dependence and the charge dependence of the matrix lipids, a possible electron-transfer mechanism of the C70/artificial lipid LB film-modified electrodes is presented. Electrochemistry of a LB film of 4 was also obtained in an aqueous medium. We demonstrate that the introduction of the chemistry of lipid bilayer membranes to the LB films of fullerenes guides us toward the construction of fullerene/lipid bilayer devices.

Electrochemistry↗

Surface-modified mutants of cytochrome P450cam: enzymatic properties and electrochemistry.

We report the electrochemistry of genetic variants of the haem monooxygenase cytochrome P450cam. A surface cysteine-free mutant (abbreviated as SCF) was prepared in which the five surface cysteine residues Cys-58, Cys-85, Cys-136, Cys-148 and Cys-334 were changed to alanines. Four single surface cysteine mutants with an additional mutation, R72C, R112C, K344C or R364C, were also prepared. The haem spin-state equilibria, NADH turnover rates and camphor-hydroxylation properties, as well as the electrochemistry of these mutants are reported. The coupling of a redox-active label, N-ferrocenylmaleimide, to the single surface cysteine mutant SCF-K344C, and the electrochemistry of this modified mutant are also described.

Animals↗

Electrochemistry and spectroelectrochemistry of meso-substituted free-base corroles in nonaqueous media: reactions of (Cor)H3, [(Cor)H4]+, and [(Cor)H2]-.

Eleven free-base corroles with different electron-donating or electron-withdrawing meso substituents were characterized as to their electrochemistry and UV-visible spectroscopy in benzonitrile (PhCN) or pyridine containing tetra-n-butylammonium perchlorate (0.1 M). Six forms of the compounds with different numbers of protons and/or oxidation states were spectroscopically identified and are represented as (Cor)H3, (.Cor)H2, [(Cor)H2]-, [(.Cor)H2]2-, [(Cor)H4]+, and [(.Cor)H4]2+, where Cor is a trianionic corrole macrocycle. The electrochemistry and UV-visible properties are a function of corrole basicity, solvent basicity, and types or sizes of the meso substituents, and the compounds could be subdivided into one of two different groups, one of which comprises sterically hindered corroles and another that does not. The electroactive species in PhCN is (Cor)H3, whereas in pyridine, one inner proton dissociates, generating a mixture of (Cor)H3, [(Cor)H2]-, and pyH+. The addition of one electron to [(Cor)H2]- reversibly gives the [(.Cor)H2]2- pi-anion radical, whereas a reversible oxidation of the same species gives the neutral radical (.Cor)H2. The first one-electron reduction of (Cor)H3 occurs at the macrocycle in PhCN, but the initial product rapidly converts to [(Cor)H2]-, which undergoes additional reversible redox reactions at the conjugated pi-ring system. The first oxidation of (Cor)H3 in PhCN leads to a mixture of (.Cor)H2 and [(Cor)H4]+, both of which could be further oxidized or reduced. The UV-visible spectra of [(Cor)H4]+ were measured in PhCN after titrations with trifluoroacetic acid, after which selected samples were examined as to their electrochemistry. The HOMO-LUMO gaps of [(Cor)H2]-, (Cor)H3, and [(Cor)H4]+ were also determined.

Journal Article↗

Electron-donating or -withdrawing nature of substituents revealed by the electrochemistry of metal-free phthalocyanines.

The effect of substituents on the electrochemistry of metal-free phthalocyanines was examined for 17 phthalocyanine compounds. This work also provides new information about the electron-donating or -withdrawing nature of various substituents, namely, alkoxy, alkylthio, alkyl, alkynyl, phenyloxy, and phenylthio groups attached to the phthalocyanine system, from the viewpoint of electrochemistry. Most of the effects of peripheral and nonperipheral substitution and changes in the ring (pi-conjugated system) size on the electrochemistry of metal-free phthalocyanines can be reasonably explained by considering the energy levels of frontier molecular orbitals of the corresponding compounds, which were obtained by calculations using the semiempirical PM3 method.

Journal Article↗

The solid-state electrochemistry of metal octacyanomolybdates, octacyanotungstates, and hexacyanoferrates explained on the basis of dissolution and reprecipitation reactions, lattice structures, and crystallinities.

The electrochemical behavior of solid microparticles of metal (Ag+, Cd2+, Co2+, Cr2+, Cu2+, Fe2+, Mn2+, Ni2+, Pb2+, and Zn2+) octacyanomolybdates, octacyanotungstates, and hexacyanoferrates has been studied by voltammetry, electrochemical quartz crystal microbalance, and microscopic diffuse reflectance spectroelectrochemical measurements. The solid microparticles have been immobilized on the surface of graphite electrodes prior to the electrochemical measurements. A comparative study of the cyclic oxidation and reduction of these compounds in the presence of potassium ions revealed that any interpretation of the electrochemistry requires the solubility equilibria of the reduced compounds to be taken into account, such as in the case of the silver salts [Ag3K[X]] and [Ag4[X]] (with X = FeII(CN)6(4-), MIV(CN)8(4-) (M = Mo, W)). Because [Ag4[X]] has a lower solubility than [Ag3K[X]], the electrochemistry is accompanied by a conversion of solid [Ag3K[X]] into solid [Ag4[X]]. Two distinct voltammetric signal systems are generated by these two compounds according to [Ag3K[X]] reversible [Ag3[X]] + K(+) + e- and [Ag4[X]] reversible [Ag3[X]] + Ag(+) + e-. When silver ions are present in the solution adjacent to the microparticles, the silver octacyanometalates and silver hexacyanoferrate show a chemically reversible and very stable voltammetric behavior. Despite the fact that the electrochemistry is based upon a single-electron/single-ion transfer reaction ([Ag4[X]] reversible [Ag3[X]] + Ag(+) + e-), more than one electrochemical signal is observed because of the simultaneous presence of amorphous and crystalline particles. This study shows that the interplay of solubility equilibria and electrochemical equilibria is generally observed for the other metal octacyanomolybdates, octacyanotungstates, and hexacyanoferrates as well.

Journal Article↗

Electrochemistry and electroanalytical applications of carbon nanotubes: a review.

This review addresses recent developments in electrochemistry and electroanalytical chemistry of carbon nanotubes (CNTs). CNTs have been proved to possess unique electronic, chemical and structural features that make them very attractive for electrochemical studies and electrochemical applications. For example, the structural and electronic properties of the CNTs endow them with distinct electrocatalytic activities and capabilities for facilitating direct electrochemistry of proteins and enzymes from other kinds of carbon materials. These striking electrochemical properties of the CNTs pave the way to CNT-based bioelectrochemistry and to bioelectronic nanodevices, such as electrochemical sensors and biosensors. The electrochemistry and bioelectrochemistry of the CNTs are summarized and discussed, along with some common methods for CNT electrode preparation and some recent advances in the rational functionalization of the CNTs for electroanalytical applications.

Journal Article↗

Molecular bilayer-based superstructures of a fullerene-carrying ammonium amphiphile: structure and electrochemistry.

The synthesis of a water-soluble C60-carrying single-chain ammonium amphiphile, 10- (N-methyl-2-fulleropyrrolidyl)decyltrimethylammonium bromide (1) as well as the characterization of aqueous solutions and cast films of 1 are described. X-ray diffraction study suggests that cast films of 1 form a multilayer structure based on biomembrane-like molecular bilayers. Electron microscopy has revealed that 1 produces both fibrous and disk-like aggregates with 10-12 nm of thickness through self-organization of 1 in aqueous solution. Differential scanning calorimetry, dynamic light scattering, FTIR, and UV-visible absorption studies were also carried out to characterize aqueous solutions and cast films of 1. Electrochemistry for an aqueous solution and for cast films of just 1 and 1 incorporated in lipid films on electrodes was conducted. It was found that films of just 1 and of 1/lipid cast on electrodes showed electron transfer reactions leading to the generation of the fullerene dianion or trianion. In contrast, electrochemistry of aqueous solution of 1 at a bare electrode gives a cathodic current near -0.5 to -0.6 V against SCE; however, an anodic current for the solution did not appear.

Carbon↗

pH dependence of heme electrochemistry in cytochromes investigated by multiconformation continuum electrostatic calculations.

Cytochromes belong to a diverse family of heme-containing redox proteins that function as intermediaries in electron transfer chains. They can be soluble, extrinsic, or intrinsic membrane proteins, and are found in different structural motifs (globin, 4-helix bundles, alpha beta roll, beta sandwich). Measured electrochemical midpoint potentials vary over a wide range even though the basic redox reaction at the heme is the same for all cytochromes. The perturbation of the heme electrochemistry is induced by the protein structure. Also, the pH dependence varies since it depends on the strength of interaction between the heme and surrounding residues as well as the ionization states of these groups. Multiconformation continuum electrostatics (MCCE) has been used to investigate the pH dependence of heme electrochemistry in cytochromes with different folds. Often propionates are the primary contributors for pH dependence especially if they are partially protonated in the reduced heme as it is shown for globin cytochrome c551 P. aeruginosa and cytochrome b5 R. norvegicus (alpha beta roll). However, if the propionates are already fully ionized at a certain pH they do not contribute to the pH dependence even if they have big interaction with the heme. At pH 7 there is no propionate contribution for cytochrome f C. reinhardtii (beta sandwich) and the 4-helix bundle c' R. palustris. Other residues can also change their ionization significantly during heme oxidation and therefore be involved in proton release and pH dependence. These residues have been identified for different cytochrome types.

Amino Acid Motifs↗

History of blood gas analysis. I. The development of electrochemistry.

In 1982 Poul Astrup, in writing a history of acid base balance and blood gases, invited me to contribute a chapter about the modern period, from 1950 to the present. Astrup's book is scheduled for publication at the end of 1985 by Radiometer Company of Copenhagen; it will be distributed by Munksgaard (Blackwell). The story of blood gas analysis since 1950 is vast: there are some 420 references to methodology and closely related physiology. This "modern" history will appear in the Journal of Clinical Monitoring as a series of essays. This first essay centers on electrochemistry, the basis of modern blood gas analysis, and accordingly examines its roots in more detail. The 17th and 18th century exploration of electricity and gas laws led to the development of thermodynamic electrochemistry in 1887 through the collaborative efforts of van't Hoff, Arrhenius, Ostwald, and Nernst. The importance of the hydrogen ion in biology and in the body's buffering mechanisms was worked out by Henderson, Van Slyke, Barcroft, and many others in the first quarter of this century. The glass electrode became available after 1925, but practical blood pH measurement was introduced in the 1950s by Astrup and Siggaard Andersen. Succeeding essays will concern micro pH methods and base excess analysis, the discoveries of Stow's CO2 electrode and Clark's O2 electrode, the development of oximetry, and related physiology.

Blood Gas Analysis↗

Importance of catecholamine release for the functional action of intrastriatal implants of adrenal medullary cells: pharmacological analysis and in vivo electrochemistry.

The aim of the present experiments was to test whether adrenal chromaffin cells implanted into the striatum of rats could exert a functional effect through a release of catecholamines. A cell suspension obtained from bovine adrenal medulla was implanted unilaterally into the striatum. The striatal dopaminergic input was extensively destroyed beforehand to preclude the possibility of reinnervation of the striatum by endogenous dopaminergic neurons. The functional influence of the implant was tested through the measurement of drug-induced rotation, while catecholamine release was measured subsequently in the same animals by in vivo electrochemistry. Transplant survival, as shown by the immunohistochemical analysis performed at the end of the in vivo experiments, was highly variable. Surviving chromaffin cells maintained their endocrine morphology and no reinnervation of the host striatum could be detected. Rotation of the animals evoked by apomorphine (0.1 mg/kg, sc) or amphetamine (5.0 mg/kg, ip) following the lesion was left uninfluenced following transplantation, even when a large transplant was recovered. On the other hand, nicotine (0.5 mg/kg, sc) evoked a strong contraversive rotational response in the transplant-bearing animals. This response could not be ascribed to the central effect of substances released peripherally and entering the nervous system through the blood-brain barrier opened by the implantation procedure, as it could not be found in animals bearing implants of other peripheral endocrine tissue, viz, pituitary. The effect of nicotine was not blocked by the pretreatment of the animals with either the opiate antagonist naloxone (2.5 mg/kg, 10 min) or the dopamine receptor blocker pimozide (0.5 mg/kg, 1 h), although the latter pretreatment blocked the amphetamine-evoked rotation. No spontaneous catecholamine release could be detected from the implanted chromaffin cells by in vivo electrochemistry, while treatment with amphetamine or nicotine did evoke a release. The results suggest that the functional effects of such intrastriatal grafts of chromaffin cells, reported in previous studies, cannot be explained by the secretion from the grafted cells of catecholamines into the denervated striatum. On the other hand the results obtained following the pharmacological stimulation of these cells indicate that adrenal grafts can, under suitable conditions, influence the functioning of the host nervous system.

Adrenal Medulla↗

An innovative spectroelectrochemical reflection cell for rapid protein electrochemistry and ultraviolet/visible/infrared spectroscopy.

A novel electrochemical reflection cell combining electrochemical techniques and spectroscopy which uses a solid gold working electrode as an optical mirror is described. This cell can be used at path lengths as low as a few micrometers and thus is suitable for ultraviolet/visible (UV/Vis) and infrared spectroscopy even for aqueous solutions and suspensions. The cell was designed for small sample volumes of only a few microliters, thus reducing the effort for sample preparation. Due to the short path length of some micrometers, the entire volume is within the Nernst diffusion layer, hence resulting in fast equilibration. Evaluation of the technique is described with direct electrochemistry of horse heart cytochrome c at the gold electrode modified with 4,4'-dithiodipyridine. Cyclic voltammograms indicate rapid and reversible electrochemistry with the correct midpoint potential (52 mV vs Ag/AgCl/3 M KCl). Chronoamperometry and coulometry confirm rapid and complete oxidation and reduction; the cell volume can be entirely fully reduced within less than 10-20 s. Spectroscopy in the UV/Vis region, with potentials at the working electrode stepped between -390 and 390 mV, show perfect titration of the cytochrome c heme bands. A Nernst fit of the alpha band absorption, with redox potential Em and number of electrons n left as parameters, yields a midpoint potential of 49 mV and n=0.9. The potential of this cell in the investigation of biological electron transfer reactions and in the study of bioenergetic systems is discussed.

Animals↗

Direct electrochemistry of heme multicofactor-containing enzymes on alkanethiol-modified gold electrodes.

Direct electrochemistry of heme multicofactor-containing enzymes, e.g., microbial theophylline oxidase (ThOx) and D-fructose dehydrogenase (FDH) from Gluconobacter industrius was studied on alkanethiol-modified gold electrodes and was compared with that of some previously studied complex heme enzymes, specifically, cellobiose dehydrogenase (CDH) and sulphite oxidase (SOx). The formal redox potentials for enzymes in direct electronic communication varied for ThOx from -112 to -101 mV (vs. Ag|AgCl), at pH 7.0, and for FDH from -158 to -89 mV, at pH 5.0 and pH 4.0, respectively, on differently charged alkanethiol layers. Direct and mediated by cytochrome c electrochemistry of FDH correlated with the existence of two active centres in the protein structure, i.e., the heme and the pyrroloquinoline quinone (PQQ) prosthetic groups. The effect of the alkanethiols of different polarity and charge on the surface properties of the gold electrodes necessary for adsorption and orientation of ThOx, FDH, CDH and SOx, favourable for the efficient electrode-enzyme electron transfer reaction, is discussed.

Adsorption↗