Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 8925651

Computer program for performing whole-cell voltage-clamp experiments.

G B Shkodrov
View original source ↗Export metadata ↓

Abstract

This computer program was designed to be used instead of a stimulator and an oscilloscope in whole-cell voltage-clamp experiments. It runs on IBM XT-AT compatible computers under MS-DOS. The program uses drivers for specific ADC-DAC boards, which are stored in separate files. The driver to be used is loaded on start-up. Drivers for Labmaster TL-1 and CSY-10 are available and the driver for CED 1401 is now being developed. Stimulus waveforms of up to five consecutive pulses are supported. Data may be acquired from up to four input channels, using two ADC sampling rates. The acquired data are visualised on six plots which can be resized and moved independently on the screen in order to obtain a readable picture. A special mode for monitoring the giga-seal formation is supported. There are several data processing procedures, which can be used without interrupting the experiment, including I-V relationships, cursor measurements, addition and subtraction of obtained currents.

Explore related subjects

MicrocomputersOscillometryPatch-Clamp TechniquesSignal Processing, Computer-AssistedSoftware ValidationUser-Computer InterfaceJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

G B Shkodrov. 1995. Computer program for performing whole-cell voltage-clamp experiments.. https://doi.org/10.1016/0169-2607(95)01696-1

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

Troubleshooting secrets you may want to try on your own.

I hope you can use one or two tools in this list to solve an issue you may be having right now, or one that comes up in the future. Please, please, please, do not try the more extensive (and potentially more troublesome) options unless you have a lot of experience working on computers or you are 100% certain you do not need any data that is on that computer. I don't like putting that warning in here, because the instructor in me wants you to learn, but not at the expense of losing all of your practice data. Have you tested your backup recently?

Microcomputers↗
PubMed2005

Desktop and conference room VR for physicians.

Virtual environments such as the CAVE and the ImmersaDesk, which are based on graphics supercomputers or workstations, are large and expensive. Most physicians have no access to such systems. The recent development of small Linux personal computers and high-performance graphics cards has afforded opportunities to implement applications formerly run on graphics supercomputers. Using PC hardware and other affordable devices, a VR system has been developed which can sit on a physician's desktop or be installed in a conference room. Affordable PC-based VR systems are comparable in performance with expensive VR systems formerly based on graphics supercomputers. Such VR systems can now be accessible to most physicians. The lower cost and smaller size of this system greatly expands the range of uses of VR technology in medicine.

Microcomputers↗
PubMed2003

Electrically actuated, pressure-driven microfluidic pumps.

In order to make the lab-on-a-chip concept a reality, it is desirable to have an integrated component capable of pumping fluids through microchannels. We have developed novel, electrically actuated micropumps and have integrated them with microfluidic systems. These devices utilize the build-up of electrolysis gases to achieve pressure-driven pumping, only require small voltages (approximately 10 V), and have approximate dimensions of 5 cm x 3 cm x 2 cm. Furthermore, these micropumps are composed of relatively inexpensive materials, and the reversible sealability of their poly(dimethylsiloxane) body to different microfluidic arrays enables repeated uses of the same pump. Under an applied potential of 10 V, three different micropumps had average flow rates of 8-13 microL min(-1) for water being pumped through five different 2 cm-long, 5500 microm(2) cross-sectional-area channels in poly(methyl methacrylate), in approximate agreement with predicted pump rates. We have also evaluated pump operation at the lower applied potential of 8 V and observed an average flow rate of 6.1 microL min(-1) for a pump-channel system. The current micropump design is capable of sustaining pumping pressures in the range of 300 kPa. The various advantages of these micropumps make them well suited for use in lab-on-a-chip analysis techniques.

Microcomputers↗