PubMed · 7502026
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
M Blank. 1995-11-17. EMF studies.. https://pubmed.ncbi.nlm.nih.gov/7502026/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Electronic article surveillance (EAS) is used in many applications throughout the world to prevent theft. EAS systems produce electromagnetic (EM) energy around exits to create an EM interrogation zone through which protected items must pass before leaving the establishment. Specially designed EAS tags are attached to these items and must either be deactivated or removed prior to passing through the EAS EM interrogation zone to prevent the alarm from sounding. Recent reports in the scientific literature have noted the possibility that EM energy transmitted by EAS systems may interfere with the proper operation of sensitive electronic medical devices. The Food and Drug Administration has the regulatory responsibility to ensure the safety and effectiveness of medical devices. Because of the possibility of electromagnetic interference (EMI) between EAS systems and electronic medical devices, in situ measurements of the electric and magnetic fields were made around various types of EAS systems. Field strength levels were measured around four types of EAS systems: audio frequency magnetic, pulsed magnetic resonant, radio frequency, and microwave. Field strengths from these EAS systems varied with magnetic fields as high as 1073.6 Am(-1) (in close proximity to the audio frequency magnetic EAS system towers), and electric fields up to 23.8 Vm(-1) (in close proximity to the microwave EAS system towers). Medical devices are only required to withstand 3 Vm(-1) by the International Electrotechnical Commission's current medical device standards. The modulation scheme of the signal transmitted by some types of EAS systems (especially the pulsed magnetic resonant) has been shown to be more likely to cause EMI with electronic medical devices. This study complements other work in the field by attaching specific characteristics to EAS transmitted EM energy. The quantitative data could be used to relate medical device EMI with specific field strength levels and signal waveforms. This is one of several efforts being made by the FDA, the electronic medical device industry and the EAS industry to mitigate the potential for EMI between EAS and medical devices.
The properties of polaritons propagating in hollow dielectric and magnetic cylinders embedded in an optically inert medium are studied. We pay special attention to those solutions of Maxwell's equations that give the behavior of the nonradiative modes (confined and localized) propagating in an optically active cylindrical medium. The dispersion relation of surface (localized) modes is obtained. Numerical results are presented for cylinders constituted by magnetic and dielectric materials, such as the uniaxial Heisenberg antiferromagnet MnF2 and the dielectric TiO2.
Explore the source record for details and available documents.