PubMed · 6931455
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
W Niedermeier. 1980. [Experience with the 3 dimensional adjustable support post].. https://pubmed.ncbi.nlm.nih.gov/6931455/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
A new generation of electronic apex locators (Endex) that operates in moistened canals has been developed lately. An experimental comparison of this apparatus with the real, tactile, and radiographic measurements of the root canal length has been conducted. Results show that tactile determination is highly inaccurate and that the Endex is as accurate as radiographic measurements. It also demonstrates that the nonreproducibility of radiographic measurements is statistically significant, whereas that of the Endex is not significant.
The aim of this study was to determine the shaping ability of Mity Roto 360 degrees and Naviflex nickel-titanium rotary instruments in simulated root canals. In all, 80 canals consisting of four different shapes in terms of angle and position of curvature were prepared by Mity Roto 360 degrees and Naviflex instruments using the techniques recommended by the manufacturers. This study describes the efficacy of the instruments in terms of preparation time, instrument failure, canal blockages, change in canal length, and three-dimensional canal form. Overall, the mean preparation time for canals prepared using Mity instruments was 5.99 min and 5.81 min when using Naviflex instruments. Canal shape had no significant effect on the speed of preparation with either instrument. No instruments separated during the study; however, 14 Naviflex and 2 Mity instruments were deformed. Canal type did not influence significantly the tendency of either instrument to deform. None of the canals became blocked with debris during preparation. The majority of canals prepared by both instruments retained their original working length, and there was no significant difference between the canal shapes in terms of the mean loss of distance or category of distance change for either instrument. Apical stops as judged from intracanal impressions were present in 29 (72%) of the canals prepared with Mity instruments and in 33 (82%) of those prepared with Naviflex instruments. However, the majority were judged to be of poor quality. Significant differences (p < 0.05) were noted in the quality of apical stops between the canal types using Mity instruments. Canals prepared with Mity and Naviflex instruments were found to be smooth in the apical half of the canal in approximately one-half of the specimens and coronally in nearly all canals. Neither instrument produced horizontal or longitudinal grooves. Favorable flow characteristics were apparent in over one-half of the canals prepared with Mity Roto instruments; however, nearly all specimens had poor taper. Flow and taper were generally poor in the specimens prepared with Naviflex instruments. Under the conditions of this study, Mity Roto 360 degrees and Naviflex instruments prepared canals rapidly, with no separations, canal blockages, and with minimal change in working length. Although, flow was adequate using Mity Roto 360 degrees instruments, the taper characteristics were less than ideal compromising the three-dimensional form of the canals. Naviflex instruments, while creating better taper, produced poorer flow characteristics. The results suggest that when using Mity Roto 360 degrees or Naviflex instruments, the stepdown sequence should be modified to improve canal flow and taper. Alternatively, an instrument with increased taper should be used to complete preparation before obturation.
The aim of this study was to determine the shaping ability of Mity Roto 360 degrees and Naviflex rotary nickel-titanium instruments in simulated canals. Forty simulated root canals made up of four different shapes in terms of angle and position of curvature were prepared by both sets of instruments using a stepdown approach. This study describes the efficacy of the instruments in terms of prevalence of canal aberrations, the amount and direction of canal transportation, and thus the overall postoperative shape. Pre- and postoperative images of the canals were taken using a videocamera attached to a computer with image analysis software. The pre- and postoperative views were superimposed to highlight the amount and position of material removed during preparation. Neither Mity Roto 360 degrees nor Naviflex instruments created any zips or elbows. Ledges were produced in 20 (50%) canals prepared with Mity instruments and in 29 (72%) canals prepared with Naviflex instruments. Statistically significant differences (p < 0.001) between canal shapes occurred in relation to the incidence of ledges with 40 degrees canals (35) associated with more aberrations than 20 degrees canals (14); the position of the beginning of the curve had no effect. The distance of ledges from the end point of preparation was also affected significantly (p < 0.01) by canal shape. Neither instrument created any perforations or danger zones. At specific positions along the canal length, canal shape had a significant influence on total width and the amount of material removed from the inner and outer aspects of the canal curve. The direction of canal transportation at the end point of preparation was most frequently toward the outer aspect of the curve in canals prepared with Naviflex instruments, whereas the Mity instruments produced a more balanced preparation. At the apex and beginning of the curve, transportation with both instruments was generally toward the outer aspect of the curve. Overall, mean absolute transportation was small and was below 0.1 mm at every position except the orifice. Under the conditions of this study, Mity Roto 360 degrees and Naviflex rotary instruments prepared canals with a high incidence of ledges. However, in the absence of other aberrations, both instruments would seem to be a valuable addition to the endodontic armamentarium.