PubMed · 5492849
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
R E Boulton, R G Huntsman, H Lehmann, P Lorkin, A E Romero-Herrera. 1970. Myoglobin variants.. https://doi.org/10.1042/bj1190069pa
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
A non-uniform alternating electric field induces motion in polarisable particles called dielectrophoresis. The effect is governed by the relative magnitudes of the dielectric properties of the medium and the particles. The technology has been used to manipulate particles for biotechnological applications, including purification, fractionation and concentration of cells and microorganisms. However, the lower size limit for the dielectrophoretic manipulation of particles was believed to be about 1 micron, but recent work has proved otherwise. The dielectrophoretic movement and properties of latex beads and a simple rod-shaped virus, tobacco mosaic virus (TMV), have been measured using microfabricated electrode structures. Measurements have been made over a range of suspending medium conductivities, applied frequencies and electric field strengths. It is shown that under appropriate conditions both latex beads and tobacco mosaic virus particles can be selectively attracted to regions of high electric field strength located at the tips of microfabricated electrode structures. The ability to selectively trap and separate bio-particles has many potential applications in the area of biotechnology.
We have developed a simple and efficient technique for automated parallel loading of >/=200 lanes on a 30 cm-wide gel in automated DNA sequencing, using porous filter materials and an associated manual or robotic system. The samples are loaded onto the teeth of a comb made of the porous material. The comb, with samples, is inserted directly above the straight edge of the polymerized gel. The samples are driven from the comb into the gel by the applied electrical field. A particularly advantageous aspect of this method is the elimination of the thin gel walls separating the sample wells in the standard gel loading technique. The time for sample loading is significantly reduced to a few minutes. The loading technique is applicable to horizontal or vertical systems, with standard or ultrathin gels.
The surface physico-chemical properties (hydrophobicity, electrophoretic mobility, chemical composition) of a large set of top- and bottom-fermenting brewing yeasts, harvested in the exponential and stationary growth phases, have been investigated. Bottom- and top-fermenting strains showed different surface properties. Top strains were generally more hydrophobic than bottom strains, due to higher surface protein concentrations. Bottom strains possessed higher surface phosphate concentrations. The different profiles of electrophoretic mobility versus pH for top and bottom strains could be explained by modelling the surface charge according to the surface chemical composition as given by X-ray photoelectron spectroscopy. For bottom strains, the electrical properties were mainly controlled by phosphate, resulting in a low isoelectric point (pH 2 or below) and an electrophoretic mobility that did not become much more negative above pH 4. For the top strains, they were mainly determined by the balance of protonated amino- and carboxylate groups in proteins, which gave a high isoelectric point (pH 4) and an electrophoretic mobility changing greatly with pH in the range of 2 to 7. No difference in surface properties was found between flocculating and non-flocculating strains, or between cells from the exponential and stationary growth phases, even for strains where flocculation occurred during the transition from one growth phase to the other.