PubMed · 4487425
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
M Maeda. 1973. [Sound].. https://pubmed.ncbi.nlm.nih.gov/4487425/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Strecker stent is a balloon-expandable metallic stent that is made of knitted tantalum wire mesh in order to Maintain flexibility. Therefore, the prosthesis is well suited to irregular and tortuous tube organs. We performed several physical experiments using 8 mm and 6 mm diameter stents made of 0.1 mm diameter wire filament. The bearing power of the 8 mm diameter stent against the circumferential compression pressure was divided into two groups, that is, 77-100% and under 66% of expansile rate. The capacity bearing the circumferential compression pressure of the latter group was greater than that of the former. Further, the bearing power of the 6 mm diameter stent was greater than that of the 56% expansile rate of the 8 mm diameter stent. The smaller the expansile rate of the stent, the smaller the minimum radius of curvature within the limits of the stent's plastic. To evaluate the suitability of the stent in clinical use, we made two projections on the inner surface of rubber tubes, and the stents were placed into the rubber tubes at different expansile rates. We evaluated the degree of contact of the stents against the rubber wall by taking soft X-ray photographs. The stents showed good suitability under the condition of incomplete expansion. For the above reasons, we concluded that, from the view-point of bearing power, the stent should be placed in the full expansile state. From the viewpoint of contact against the vessel wall, the stent should be placed in the incomplete expansile state.
The comparative evaluation of radiographic screen-film systems presents several problems from both the theoretical and the experimental points of view. From the theoretical point of view the main difficulties are related to the choice of the parameters best suited to express the "overall quality" of a system. This quantity is expressed as a product of image quality index and system sensitivity. As image quality index we assumed the signal-to-noise power ratio: this index depends in an explicit way on contrast, resolution and noise of the system. From the experimental point of view the main problem is that to measure some basic quantities, sophisticated and expensive equipment, like computer-controlled microdensitometers, is generally required. In this paper, we report the Italian Association of Biomedical Physicists Task group suggestions for measuring the basic physical parameters (with particular reference to the use of cost-effective equipment and for purchasing specification drafting). Using synthetic quality indices, the evaluation criteria of radiographic materials are directly derived from the general theory of radiographic image perception.
Explore the source record for details and available documents.