Search PubMedSearch

PubMed · 3627907

Depth on a flat screen.

Abstract

The hypothesis was tested that the coupling of parallax shifts between objects depicted on a monitor screen around a fixation point with the head movements of an observer viewing this screen monocularly around a point coinciding with the fixation point is sufficient to create a convincing depth impression and to enable the observer to make reliable estimations of depth. The estimates were based on monocular vision and involved the aligning of wedges. The investigation consisted of two analogous experiments carried out simultaneously, one on depth estimations virtually in the screen and one on depth estimations virtually in front of the screen. In each experiment three conditions were compared: an active condition in which the coupling of parallax shifts and observer's head movements operated, a passive condition in which it did not, and a real-life set-up to measure the maximum reliability in depth estimation. The hypothesis is confirmed: in the active condition the variances in the alignments are significantly smaller than in the passive condition and approach those in the real-life set-up. This holds not only for estimates in the screen but also for estimates in front of the screen, that is, we can make a thing apparently leap out of the screen towards the observer. Results are interpreted against the background of the debate between the direct and the indirect theories of perception.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

G J Smets, C J Overbeeke, M H Stratmann. 1987. Depth on a flat screen.. https://doi.org/10.2466/pms.1987.64.3c.1023

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Quantitative depth for a phantom surface can be based on cyclopean occlusion cues alone.

Liu, L., Stevenson, S.B., and Schor, C.M. (1994, Nature, 367, 66-669) reported quantitative stereoscopic depth in a phantom rectangle which appeared to lack conventional matching elements. Later, Gillam, B.J. (1995, Nature, 373, 202-203) and Liu, L., Stevenson, S.B., and Schor, C.M. (1995, Nature, 373, 203) and Liu, L., Stevenson, S.B., and Schor, C.M. (1997, Vision Research, 37(5), 633-644) indicated that the varying depth of the phantom rectangle could be based on stereoscopic matching. To remove the contaminating effects of conventional stereopsis from the Liu et al. (1994) original example, we presented a pair of parallel vertical lines to each eye where there is a central gap in the right line for the left eye's view and in the left line for the right eye's view. Observers saw a phantom rectangle bounded by subjective contours whose depth increased with the thickness of the lines. We attribute the quantitative variation of depth to a purely cyclopean (binocular) process sensitive to the pattern of contour presence and absence in the two eye's view.

Cues

Weighted combination of size and disparity: a computational model for timing a ball catch.

How do we time hand closure to catch a ball? Binocular disparity and optical looming provide two sources of information about an object's motion in depth, but the relative effectiveness of the two cues depends on ball size. Based on results from a virtual reality ball-catching task, we derive a simple model that uses both cues. The model is sensitive to the relative effectiveness of size and disparity and implicitly switches its response to the cue that specifies the earliest arrival and away from a cue that is lost or below threshold. We demonstrate the model's robustness by predicting the response of participants to some very unusual ball trajectories in a virtual reality task.

Cues

Isolating the interference caused by cue duration in partial report: a quantitative approach.

In bar-probe partial report experiments, subjects are presented with a brief array of letters, followed by a cue that singles out a target letter. Using this procedure, V. M. Townsend (1973) reported a counterintuitive effect: As the duration of a cue was increased, target performance decreased dramatically. The aim of the present study was to isolate the locus of the cue-duration effect. To this end, several characteristics of the bar-probe display were manipulated in a single experiment: the interstimulus interval between the array and the cue, array density, the number of letters, and the number of symbols adjacent to the target. These factors were manipulated on a priori grounds so as to affect the different sources of information used in the bar-probe task--namely, durable storage, abstract identity information, and feature level information. The data were accurately fit by a simple quantitative, multinomial model that assumes that the different sources of information used in the bar-probe task make independent contributions to performance. The critical assumption of the model is that cue duration interferes with only one source of information--namely, feature level information.

Cues