PubMed · 2866281
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
I Zágh, E Kendelényi, S Szekeres. 1985. [Interlocking medullary nailing, using a laser method].. https://pubmed.ncbi.nlm.nih.gov/2866281/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
The study investigated the influence of two different implants--the dynamic hip screw (AOR) 135 degrees with 2-hole-plate and the 135 degrees gamma-nail (HowmedicaR)--on the resulting stress and strain distributions in the proximal femur after stabilization of an idealized trochanteric fracture under typical physiological loading conditions. Data recorded for the uninjured femur were used for comparison. Two-dimensional plane stress finite element models of the femur and the implants were used for the calculations. The three-dimensional nature of this problem was approximated by an appropriate distribution of element thickness according to the real geometry in combination with an overlay technique, superimposing special finite element layers for each constituent of the bone-implant system (i.e. steel, cortical and cancellous bone). Three variations of the idealized fracture were introduced, i.e. free, with callous and bony bridging, the screw being modelled in a movable ('dynamic') as well as in a locked state. As far as the resulting stress distributions are concerned, neither of the two implants proved to be significantly superior to the other for stabilization of the idealized fracture selected.
Explore the source record for details and available documents.
In an attempt to establish some principles for the use of strain gauges in monitoring fracture healing, four strain gauges were fastened onto the most proximal pin of a Shearer external fixator applied to a hardwood fracture model. Compression and bending loads were applied and the strain data were obtained. The results show that the location of the strain gauge on the circumference of the pin has a significant effect on strain values.