PubMed · 2040572
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
M I Freeman. 1991. Patient selection.. https://doi.org/10.1097/00004397-199103120-00003
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Explore the source record for details and available documents.
PURPOSE: To report a new sutureless ring system to fix corneal contact lens in place during vitrectomy. DESIGN: New surgical instrument. METHODS: The sutureless ring system consists of a stainless steel ring that has two upright tabs 180 degrees apart with a hook on the top and two elastic silicone bands 8 mm in diameter to fix the ring to the eyelid speculum. RESULTS: The contact lens fixed in place with the sutureless ring was stable and allowed intraoperative visualization of the fundus. CONCLUSION: This suture-free contact lens system facilitates visualization of the fundus during vitrectomy allowing shorter surgical time. It also enables us to avoid additional trauma associated with the lens ring fixation procedure.
BACKGROUND: Water content of the corneal stroma may influence excimer laser ablation and may therefore affect residual refractive error following laser in situ keratomileusis. This study reports associations between water content of hydrogel materials and laser ablation depth. METHODS: Hydrated (n = 4) and dehydrated (n = 4) hydrogel buttons of 38%, 45%, 55% and 69% water content were ablated with the Nidek EC-5000 ArF 193 nm excimer laser, set to deliver a -6.00 DS curvature. Central curvature, optical quality and water content were measured before and after ablation. Hydrated buttons were rehydrated postablation and prior to measurement, to eliminate the effect of water removal during the procedure. The ablation depth per pulse was calculated. RESULTS: The average ablation rate for fully hydrated buttons was 0.51 +/- 0.17 microm. The ablation rate for hydrated materials (dry component ablation) reduced with increasing water content (P < 0.001). Dry hydrogel materials (0% water content) had an average ablation rate of 0.23 +/- 0.06 microm per pulse. CONCLUSIONS: For a constant laser energy output, lower water content materials ablated to a greater extent than higher water content materials. This model provides a simple way to assess the effect of water content and dehydration on myopic laser in situ keratomileusis.