PubMed · 1918662
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
N J Gendusa. 1991. Dentin bonding systems.. https://pubmed.ncbi.nlm.nih.gov/1918662/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
OBJECTIVES: To test the hypothesis that a blue light emitting diode (LED) light curing unit (LCU) can produce an equal dental composite depth of cure to a halogen LCU adjusted to give an irradiance of 300 mWcm-2 and to characterise the LCU's light outputs. MATERIALS AND METHODS: Depth of cure for three popular composites was determined using a penetrometer. The Student's t test was used to analyse the depth of cure results. A power meter and a spectrometer measured the light output. RESULTS: The spectral distribution of the LCUs differed strongly. The irradiance for the LED and halogen LCUs were 290 mWcm-2 and 455 mWcm-2, when calculated from the scientific power meter measurements. The LED LCU cured all three dental composites to a significantly greater (P < 0.05) depth than the halogen LCU. CONCLUSIONS: An LED LCU with an irradiance 64% of a halogen LCU achieved a significantly greater depth of cure. The LCU's spectral distribution of emitted light should be considered in addition to irradiance as a performance indicator. LED LCUs may have a potential for use in dental practice because their performance does not significantly reduce with time as do conventional halogen LCUs.
STATEMENT OF PROBLEM: Mechanical retentive devices and the application of complicated surface preparation have been indispensable for bonding composite material to the metal substructure of restorations. PURPOSE: This study evaluated the priming effects of 4 metal conditioners on bonding between a prosthetic veneering material and a silver-palladium-based casting alloy. MATERIAL AND METHODS: Four primers designed for conditioning noble metal alloys (Alloy Primer, Metaltite, Metal Primer II, and V-Primer) were assessed (all materials contain organic sulfur compounds). Cast disk specimens made of silver-palladium-copper-gold alloy (Castwell M.C.12) were primed with 1 of the 4 primers, and bonded with a light-activated prosthetic composite material (Axis). Shear testing was performed before and after thermocycling for evaluation of bond durability. RESULTS: All primed groups showed improved 24-hour bond strengths compared with the unprimed group. After thermocycling, 3 groups primed with the Metal Primer II, Alloy Primer, and Metaltite agents exhibited the highest bond strength. CONCLUSION: Use of 1-liquid metal conditioners containing sulfur compounds was a simple and useful method for improving bonding between the alloy and the composite material tested.
The load applied to a tooth surface during mastication is not a constant force and the objective of the research reported in this paper was to evaluate the impact of variable masticatory loads on the mechanisms involved in the wear of a dental composite. A new wear testing machine has therefore been developed, which incorporates a sine cam mechanical system to generate an alternating sine curve load at the wear surfaces to simulate the loading produced by masticatory process. The basic wear pattern is generated by positioning a disc shaped specimen against a rotating cylindrical ring with a normal load applied to the upper surface of the specimen. This approach allows different combinations of static and sine curve loads to be applied, thereby facilitating the study of different wear situations. It was found that the wear behaviour associated with variable loading patterns differed from that of static loading.