Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 17223376

Ultrasonically driven continuous process for vegetable oil transesterification.

Carmen Stavarache·M Vinatoru·Y Maeda·H Bandow
View original source ↗Export metadata ↓

Abstract

A bench scale continuous process for the manufacture of biodiesel from neat vegetable oils under high power low frequency ultrasonic irradiation was investigated. The experimental studies explored variations in alcohol-oil stoichiometry and type of oil. Important parameters such as residence time and reaction volume were considered. The highest conversion was achieved when short residence time was employed. The transesterification under ultrasonic irradiation is mainly influenced by the residence time in the reactor and alcohol-oil molar ratio.

Explore related subjects

EsterificationPlant OilsUltrasonicsJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Carmen Stavarache, M Vinatoru, Y Maeda, H Bandow. 2007-01-16. Ultrasonically driven continuous process for vegetable oil transesterification.. https://doi.org/10.1016/j.ultsonch.2006.09.014

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

Transesterification of canola oil in mixed methanol/ethanol system and use of esters as lubricity additive.

Transesterification of canola oil was carried out with methanol, ethanol, and various mixtures of methanol/ethanol, keeping the molar ratio of oil to alcohol 1:6 and using KOH as a catalyst. Mixtures of alcohol increased the rate of transesterification reaction and produced methyl as well as ethyl esters. The increased rate was result of better solubility of oil in reaction mixture due to better solvent properties of ethanol than methanol and equilibrium due to methanol. With 3:3 molar ratio of methanol to ethanol {MEE (3:3)} the amount of ethyl ester formed was 50% that of methyl ester. Properties (acid value, viscosity, density) of all esters including mixed esters were within the limits of ASTM standards. Lubricities of these esters are in the order: ethyl ester>methyl ethyl ester>methyl ester.

Esterification↗
PubMed2006

Esterification of select polyols with D-glucaric acid as model reactions for esterification of starch.

Aqueous solutions of D-glucaric acid and model polyols xylitol, methyl alpha-D-glucopyranoside or beta-cyclodextrin were freeze dried, then heated, and the product mixtures analyzed by instrumental methods that included GC-MS, electrospray ionization-mass spectrometry (ESIMS), and NMR. The thermal process and analyses were carried out with these polyols in order to determine to what extent multiple acylations of the alcohol functions occurred with D-glucaric acid lactones serving as acylating agents, the extent to which acylations occurred at the 1 degrees alcohol sites, and the relative tendency for acylations to occur at the C1 or C6 end of the glucaryl unit. The results of these studies showed an overwhelming preference for 1 degrees alcohol acylation and preferred acylation occurring at the C1 end of the glucaryl unit.

Esterification↗
PubMed2006

Dual positional and stereospecificity of lipoxygenase isoenzymes from germinating barley (green malt): biotransformation of free and esterified linoleic acid.

The lipoxygenase isoenzymes LOX1 and LOX2 from green malt were separated by isoelectric focusing, and their catalytic properties regarding complex lipids as substrates were characterized. The regio- and stereoisomers of hydroperoxy octadecadienoates (HPODE) resulting from LOX1 and LOX2 enzymatic transformations of linoleic acid, methyl linoleate, linoleic acid glycerol esters monolinolein, dilinolein, and trilinolein, and 1-palmitoyl-2-linoleoyl-glycero-3-phosphocholine (PamLinGroPCho) were determined. In addition, biotransformations of polar and nonpolar lipids extracted from malt were performed with LOX1 and LOX2. The results show that LOX2 catalyzes the oxidation of esterified fatty acids at a higher rate and is more regioselective than LOX1. The dual position specificity of LOX2 (9-HPODE:13-HPODE) with trilinolein as the substrate (6:94) was higher than the resultant ratio (13:87) when free linoleic acid was transformed. A high (S)-enantiomeric excess of 13-HPODE was analyzed with all esterified substrates confirming the formation of 13-HPODE through the LOX2 enzyme; however, 9-HPODE detected after LOX2 biotransformations showed (R)-enantiomeric excesses. PamLinGroPCho was oxygenated by LOX1 with the highest regio- and stereoselectivities among the applied substrates.

Esterification↗