Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 16688569

A surface-modified sperm sorting device with long-term stability.

Jason M Wu·Yaokuang Chung·Kimberly J Belford·Gary D Smith·Shuichi Takayama·Joerg Lahann
View original source ↗Export metadata ↓

Abstract

Microfluidic devices fabricated from poly (dime- thylsiloxane) (PDMS) offer the ability to improve our biological and medical capabilities. Although PDMS offers a range of intriguing benefits for biomedical applications, the intrinsically hydrophobic nature of PDMS may impede with the tremendous potential of these devices. Here, we describe a PDMS-based sperm sorting device, which has been surface-modified via graft-co-polymerization of poly(ethylene glycol) methyl ether methacrylate to create a moderately hydrophilic and non-fouling surface. This process involves the exposure of PDMS to UV/ozone, which activates the PDMS surface to bond to the substrate and, at the same time, initiates the graft-co-polymerization from the PDMS surface. In this study, we confirmed long-term stability of surface-modified PDMS for up to 56 days based on Fourier transformation infrared spectroscopy (FTIR), contact angle measurements, and protein adsorption studies. Moreover, the applicability of our method to PDMS-based sperm sorting devices was demonstrated by successfully sorting human sperm.

Explore related subjects

Cell Culture TechniquesCell SeparationCells, CulturedEquipment DesignEquipment Failure AnalysisFlow CytometryHumansMaleMicrofluidic Analytical TechniquesSpecimen HandlingSperm CountSpermatozoaSurface PropertiesEvaluation StudyJournal ArticleResearch Support, Non-U.S. Gov'tResearch Support, U.S. Gov't, Non-P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jason M Wu, Yaokuang Chung, Kimberly J Belford, Gary D Smith, Shuichi Takayama, Joerg Lahann. 2006. A surface-modified sperm sorting device with long-term stability.. https://doi.org/10.1007/s10544-006-7705-7

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Investigation of metabolic objectives in cultured hepatocytes.

Using optimization based methods to predict fluxes in metabolic flux balance models has been a successful approach for some microorganisms, enabling construction of in silico models and even inference of some regulatory motifs. However, this success has not been translated to mammalian cells. The lack of knowledge about metabolic objectives in mammalian cells is a major obstacle that prevents utilization of various metabolic engineering tools and methods for tissue engineering and biomedical purposes. In this work, we investigate and identify possible metabolic objectives for hepatocytes cultured in vitro. To achieve this goal, we present a special data-mining procedure for identifying metabolic objective functions in mammalian cells. This multi-level optimization based algorithm enables identifying the major fluxes in the metabolic objective from MFA data in the absence of information about critical active constraints of the system. Further, once the objective is determined, active flux constraints can also be identified and analyzed. This information can be potentially used in a predictive manner to improve cell culture results or clinical metabolic outcomes. As a result of the application of this method, it was found that in vitro cultured hepatocytes maximize oxygen uptake, coupling of urea and TCA cycles, and synthesis of serine and urea. Selection of these fluxes as the metabolic objective enables accurate prediction of the flux distribution in the system given a limited amount of flux data; thus presenting a workable in silico model for cultured hepatocytes. It is observed that an overall homeostasis picture is also emergent in the findings.

Cell Culture Techniques↗
PubMed2007

Quantitation of interaction of lipids with polymer surfaces in cell culture.

As cell culture medium development efforts have progressed towards leaner, serum-free, and chemically defined formulations, it has become increasingly important to ensure that the appropriate concentrations of all nutrients are maintained and delivered at point of use. In light of concurrent efforts to progress to disposable polymeric storage and culture platforms, the characterization and control of medium component interactions with container surfaces can be a key issue in ensuring consistent delivery of these medium formulations. These studies characterize the interactions of lipids with culture surfaces typically encountered in the bioprocess industry using model systems. The extent and kinetics of lipid association with polymeric surfaces were determined using radio-labeled linoleic acid and cholesterol. The effect of methyl-beta-cyclodextrin, a component commonly used to solubilize lipids in culture media, on association kinetics was also examined. In addition, loss of lipids across a sterilizing membrane filter was quantified. We find that there is potential for significant loss of hydrophobic components due to non-specific binding to surfaces at timescales relevant to a typical cell culture process. The extent of loss is dependent on the nature of the hydrophobic component as well as the type of surface. These studies highlight the potential of the extracellular environment to modify medium composition and also emphasize the importance of medium formulation strategies, including those used in the delivery of hydrophobic components. It is noted, however, that the level of loss is very dependent on the specific system including the composition of the culture medium used.

Cell Culture Techniques↗
PubMed2007

ERK 1/2 activation in enhanced osteogenesis of human mesenchymal stem cells in poly(lactic-glycolic acid) by cyclic hydrostatic pressure.

The aim of this study was to identify the signal transduction pathways and mechano-transducers that play critical roles in the processes induced by changes in cyclic hydrostatic pressure and fluid shear in 3-dimensional (3D) culture systems. Mesenchymal stem cells were loaded into a polymeric scaffold and divided into three groups according to the stress treatment: static, fluid shear, and hydrostatic pressure with fluid shear. Cells were exposed daily to a hydrostatic pressure of 0.2 MPa for 1 min followed by 14 min rest with fluid flow at 30 rpm. Protein extracts were analyzed by Western blot for extracellular signal-regulated kinase 1/2 (ERK1/2). The complexes were cultured under the mechanical stimuli for 21 days with or without phospho-ERK1/2 inhibitor (U0126) and evaluated by RT-PCR, calcium contents, and immunohistochemistry. Under conditions of mechanical stimulation, the activation of ERK1/2 was sustained or increased with time. U0126 suppressed mechanical stimuli-induced expression of osteocalcin. In addition, calcium contents and the degrees of osteocalcin and osteopontin staining were decreased by this inhibitor. These results demonstrate that mechanical stimuli, particularly hydrostatic pressure with fluid shear, enhance osteogenesis in 3D culture systems via ERK1/2 activation.

Cell Culture Techniques↗