Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 15974265

Dairy manure nutrient analysis using quick tests.

A Singh·J R Bicudo
View original source ↗Export metadata ↓

Abstract

Rapid on-farm assessment of manure nutrient content can be achieved with the use of quick tests. These tests can be used to indirectly measure the nutrient content in animal slurries immediately before manure is applied on agricultural fields. The objective of this study was to assess the reliability of hydrometers, electrical conductivity meter and pens, and Agros N meter against standard laboratory methods. Manure samples were collected from 34 dairy farms in the Mammoth Cave area in central Kentucky. Regression equations were developed for combined and individual counties located In the area (Barren, Hart and Monroe). Our results indicated that accuracy in nutrient estimation could be improved if separate linear regressions were developed for farms with similar facilities in a county. Direct hydrometer estimates of total nitrogen were among the most accurate when separate regression equations were developed for each county (R2 = 0.61, 0.93, and 0.74 for Barren, Hart and Monroe county, respectively). Reasonably accurate estimates (R2 > 0.70) were also obtained for total nitrogen and total phosphorus using hydrometers, either by relating specific gravity to nutrient content or to total solids content. Estimation of ammoniacal nitrogen with Agros N meter and electrical conductivity meter/pens correlated well with standard laboratory determinations, especially while using the individual data sets from Hart County (R2 = 0.70 to 0.87). This study indicates that the use of quick test calibration equations developed for a small area or region where farms are similar in terms of manure handling and management, housing, and feed ration are more appropriate than using "universal" equations usually developed with combined data sets. Accuracy is expected to improve if individual farms develop their own calibration curves. Nevertheless, we suggest confidence intervals always be specified for nutrients estimated through quick testing for any specific region, county, or farm.

Explore related subjects

AutomationDairyingElectric ConductivityEnvironmental MonitoringManureMicronutrientsReproducibility of ResultsSensitivity and SpecificityWaterEvaluation StudyJournal ArticleResearch Support, U.S. Gov't, Non-P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A Singh, J R Bicudo. 2005. Dairy manure nutrient analysis using quick tests.. https://doi.org/10.1080/09593332608618541

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

Cyclodextrins micrometric powders obtained by supercritical fluid processing.

Supercritical fluid technology offers the possibility to produce dry powder formulations of biocompatible materials, overcoming the drawbacks of classical micronization processes. In this work, Supercritical Assisted Atomization (SAA) has been used to micronize alpha-cyclodextrin (alpha-CD) and hydroxypropyl-beta-cyclodextrin (HP-beta-CD). Some process parameters, such as precipitation temperature and solute concentration in the liquid solution, have been studied to evaluate their influence on morphology and size of precipitated particles. Cyclodextrins (CDs) micronization has been successful: well-defined spherical microparticles of alpha-CD and HP-beta-CD have been produced. Particle size analysis revealed that sharp distributions have been obtained: 95% of particles have diameters ranging between 0.1 and 5 microm for both CDs. X-ray and DSC analyses have been also performed to investigate CDs modifications induced by SAA processing: amorphous particles have been obtained in both cases, whereas raw alpha-CD was crystalline and raw HP-beta-CD was amorphous.

Automation↗
PubMed2006

Quantitative imaging of contaminant distributions in heterogeneous porous media laboratory experiments.

Intermediate-scale laboratory experiments on heterogeneous porous media have been increasingly used for the study of saturated and unsaturated ground water systems. While the ability to reproduce field-scale heterogeneity in these experiments has advanced, the use of visualization or image analysis methods to characterize the spatial distribution of solute concentrations has largely remained at the homogeneous media level. To advance these imaging techniques we developed a generic image analysis package that, for the first time, automatically segments regions in photographic images that require unique concentration calibration curves due to varying porous media properties or lighting nonuniformities. As a robust test, our image analysis package was applied to an intermediate-scale flow tank experiment characterized by a correlated random permeability field with unprecedented resolution. Twenty-five distinct classes of porous media were developed and binned to the synthetic permeability field, creating an experimental field of 3456 rectangular cells and thereby ensuring the emplaced field closely matched the statistics of the original continuous distribution. Concentration distributions were determined for an experimental tracer run and the corresponding dispersion parameters were calculated. The closeness of the experimental, image-processed longitudinal dispersivity (4.6 x 10(-2) m) to that obtained from the field statistics (9.1 x 10(-2) m) verifies our image analysis technique.

Automation↗
PubMed2006

Performance of the automated Abbott RealTime HIV-1 assay on a genetically diverse panel of specimens from Brazil.

The combination of automated sample preparation and real-time RT-PCR for measurement of HIV-1 viral load has the potential to significantly enhance throughput, reduce operator-associated error, and increase assay sensitivity and dynamic range. In this study, RNA was extracted from the plasma of 91 HIV-1 seropositive Brazilian blood donors using the Abbott m2000sp automated sample preparation system. Viral loads measured using the RealTime HIV-1 (RealTime HIV-1) assay and the Abbott m2000rt instrument were compared to values obtained in the LCx HIV RNA quantitative assay. Subtype was determined for 89 of 91 specimens by sequence/phylogenetic analysis of three genomic regions: gag p24, pol integrase, and env gp41. The panel included 69 subtype B, 1 C, 2 F, and 17 recombinant strains. Eighty-seven specimens were quantified by both assays. Two specimens were quantified only in RealTime HIV-1. Two additional specimens below the detection limit of both assays were also negative on PCR amplification. Viral load results were highly correlated, and good agreement was observed between assays with 90% of values within 0.5 log(10)copies/ml. The RealTime HIV-1 assay and m2000 system offer the advantages of automation while providing reliable quantification of diverse HIV strains.

Automation↗