Search PubMed⌕ Search
Home/Archive/PubMed

PubMed · 15826854

Geodesic photogrammetry for localizing sensor positions in dense-array EEG.

Gerald S Russell·K Jeffrey Eriksen·Pieter Poolman·Phan Luu·Don M Tucker
View original source ↗Export metadata ↓

Abstract

OBJECTIVE: An important goal for functional brain studies using EEG technology is to estimate the location of brain sources that produce the scalp-recorded signals. The accuracy of source estimates is dependent upon many variables, one of which is the accurate description of the scalp positions of the EEG sensors. The objective of the present research was to develop a photogrammatic method for sensor localization that is fast, accurate, and easy to use. METHODS: With the novel photogrammetric method, multiple cameras were arranged in a geodesic array, and images of the sensors on the subject's head were acquired allowing for the reconstruction of the 3D sensor positions. RESULTS: Data from the photogrammetric method were compared with data acquired with the conventional electromagnetic method. The accuracy of the photogrammatic method, quantified as RMS of the measured positions and the actual known positions, was similar (mean error = 1.27 mm) to the electromagnetic method (mean error = 1.02 mm), and both approximated the localization error of the calibration object (mean error = 0.56 mm). CONCLUSIONS: Accurate determination of 3D sensor positions can be accomplished with minimal demands on the time of the subject and the experimenter using the photogrammetric method.

Explore related subjects

ElectrodesElectroencephalographyHumansImage Processing, Computer-AssistedMagnetoencephalographyPhotogrammetryReproducibility of ResultsSensitivity and SpecificityComparative StudyJournal ArticleResearch Support, N.I.H., ExtramuralResearch Support, U.S. Gov't, P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Gerald S Russell, K Jeffrey Eriksen, Pieter Poolman, Phan Luu, Don M Tucker. 2005. Geodesic photogrammetry for localizing sensor positions in dense-array EEG.. https://doi.org/10.1016/j.clinph.2004.12.022

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Probing spin accumulation in Ni/Au/Ni single-electron transistors with efficient spin injection and detection electrodes.

We have investigated spin accumulation in Ni/Au/Ni single-electron transistors assembled by atomic force microscopy. The fabrication technique is unique in that unconventional hybrid devices can be realized with unprecedented control, including real-time tunable tunnel resistances. A grid of Au disks, 30 nm in diameter and 30 nm thick, is prepared on a SiO2 surface by conventional e-beam writing. Subsequently, 30 nm thick ferromagnetic Ni source, drain, and side-gate electrodes are formed in similar process steps. The width and length of the source and drain electrodes were different to exhibit different coercive switching fields. Tunnel barriers of NiO are realized by sequential Ar and O2 plasma treatment. By use of an atomic force microscope with specially designed software, a single nonmagnetic Au nanodisk is positioned into the 25 nm gap between the source and drain electrodes. The resistance of the device is monitored in real time while the Au disk is manipulated step-by-step with angstrom-level precision. Transport measurements in magnetic field at 1.7 K reveal no clear spin accumulation in the device, which can be attributed to fast spin relaxation in the Au disk. From numerical simulations using the rate-equation approach of orthodox Coulomb blockade theory, we can put an upper bound of a few nanoseconds on the spin-relaxation time for electrons in the Au disk. To confirm the magnetic switching characteristics and spin injection efficiency of the Ni electrodes, we fabricated a test structure consisting of a Ni/NiO/Ni magnetic tunnel junction with asymmetric dimensions of the electrodes similar to those of the single-electron transistors. Magnetoresistance measurements on the test device exhibited clear signs of magnetic reversal and a maximum tunneling magnetoresistance of 10%, from which we deduced a spin polarization of about 22% in the Ni electrodes.

Electrodes↗
PubMed2006

Organized assemblies of single wall carbon nanotubes and porphyrin for photochemical solar cells: charge injection from excited porphyrin into single-walled carbon nanotubes.

Photochemical solar cells have been constructed from organized assemblies of single-walled carbon nanotubes (SWCNT) and protonated porphyrin on nanostructured SnO2 electrodes. The protonated form of porphyrin (H4P2+) and SWCNT composites form 0.5-3.0 microm-sized rodlike structures and they can be assembled onto nanostructured SnO2 films [optically transparent electrode OTE/SnO2] by an electrophoretic deposition method. These organized assemblies are photoactive and absorb strongly in the entire visible region. The incident photon to photocurrent efficiency (IPCE) of OTE/SnO2/SWCNT-H4P2+ is approximately 13% at an applied potential of 0.2 V versus saturated calomel electrode. Femtosecond pump-probe spectroscopy experiments confirm the decay of the excited porphyrin in the SWCNT-H4P2+ assembly as it injects electrons into SWCNT. The dual role of SWCNT in promoting photoinduced charge separation and facilitating charge transport is presented.

Electrodes↗
PubMed2006

Free flow isotachophoresis in an injection moulded miniaturised separation chamber with integrated electrodes.

An injection moulded free flow isotachophoresis (FFITP) microdevice with integrated carbon fibre loaded electrodes with a separation chamber of 36.4mm wide, 28.7 mm long and 100 microm deep is presented. The microdevice was completely fabricated by injection moulding in carbon fibre loaded polystyrene for the electrodes and crystal polystyrene for the remainder of the chip and was bonded together using ultrasonic welding. Two injection moulded electrode designs were compared, one with the electrode surface level with the separation chamber and one with a recessed electrode. Separations of two anionic dyes, 0.2mM each of amaranth and acid green and separations of 0.2mM each of amaranth, bromophenol blue and glutamate were performed on the microdevice. Flow rates of 1.25 ml min(-1) for the leading and terminating electrolytes were used and a flow rate of 0.63 ml min(-1) for the sample. Electric fields of up to 370 V cm(-1) were applied across the separation chamber. Joule heating was not found to be significant although out-gassing was observed at drive currents greater than 3 mA.

Electrodes↗