Search PubMed⌕ Search

PubMed · 15081127

Interventional spinal procedures.

Abstract

The interventional procedures for disk herniation and protrusion by percutaneous techniques are decompressive such as chemodiscolysis with chimopapain, nucleo-discectomy introduced by Onik, LASER discectomy, and recently nucleoplasty, and decompressive and direct antinflammatory such as chemiodiscolysis with an Oxygen-ozone mixture. These techniques have minimized the invasive nature of surgery and avoid or decrease complications like infection linked to surgery. Reducing intervertebral disc size by mechanical aspiration of a part of the disc or partially dissolving the herniation by drying reduces the conic pressure on the torn annulus and creates the space necessary for retropulsion whenever the circular fibres of the annulus regain a minimum capacity to contain the disc under tension. The proposed suggestion in these techniques is that a small change in volume produces large change in pressure. The success rates reported in different studies vary from 65 to 80% of excellent or good results with chemonucleolysis and aspiration. Vertebroplasty (VP) is done by percutaneous injection of acrylic cement (polymethylmetacrylate-PMMA) into the vertebrae under fluoroscopic and/or CT control to achieve an antalgic effect and stabilize the vertebral body. VP has been used for vertebral collapses caused by osteoporosis, long-term steroid treatment, aggressive symptomatic angiomas and lytic metastasis. The reported figures in literature are 80-95% of pain relief, within 7 days after procedure, commonly on the same day.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Cosma Andreula, Mario Muto, Marco Leonardi. 2004. Interventional spinal procedures.. https://doi.org/10.1016/j.ejrad.2003.10.013

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Effects of nano HAP on biological and structural properties of glass bone cement.

A novel type of glass-based nanoscale hydroxyapatite (HAP) bioactive bone cement (designed as GBNHAPC) was synthesized by adding nanoscale hydroxyapatite crystalline (20-40 nm), into the self-setting glass-based bone cement (GBC). The inhibition rate of nanoscale HAP and micron HAP on osteosarcoma U2-OS cells was examined. The effects of nanoscale HAP on the crystal phase, microstructure and compressive strength of GBNHAPC were studied, respectively. It was concluded that nanoscale HAP could inhibit the cell proliferation, whereas micron HAP could not, and that nanoscale HAP could be dispersed in the cement evenly and the morphology did not change significantly after a longer immersion time. XRD and FTIR results show nanoscale HAP did not affect the setting reaction of the cement. Furthermore, GBNHAPC had a higher compressive strength (92.6 +/- 3.8 MPa) than GBC (80.1 +/- 3.0 MPa). It was believed that GBNHAPC might be a desirable biomaterial that could not only fill bone defects but also inhibit cancer cell growth.

Bone Cements↗

CT volumetry of intravertebral cement after kyphoplasty. Comparison of polymethylmethacrylate and calcium phosphate in a 12-month follow-up.

This study was intended to measure the volume of intravertebral cement after balloon kyphoplasty with high resolution computed tomography (CT) and dedicated software. Volume changes of biocompatible calcium phosphate cement (CPC) were detected during a follow-up of 12 months. Measurements were compared with a control group of patients treated with polymethylmethacrylate (PMMA). Twenty-three vertebrae (14 CPC, 9 PMMA) of 12 patients were examined with CT using an identical imaging protocol. Dedicated software was used to quantify intravertebral cement volume in subvoxel resolution by analyzing each cement implant with a density-weighted algorithm. The mean volume reduction of CPC was 0.08 ml after 12 months, which corresponds to an absorption rate of 2 vol%. However, the difference did not reach significance level (P>0.05). The mean error estimate was 0.005 ml, indicating excellent precision of the method. CT volumetry appears a precise tool for measurement of intravertebral cement volume. CT volumetry offers the possibility of in vivo measurement of CPC resorption.

Bone Cements↗

A novel percutaneous system for bone graft delivery and containment for elevation and stabilization of vertebral compression fractures. Technical note.

OBJECT: Vertebroplasty and kyphoplasty are minimally invasive procedures used to treat persistently symptomatic vertebral compression fractures (VCFs). Both interventions usually involve injection of polymethyl methacrylate (PMMA). The purpose of this technical note was to review the theory and surgical technique for a novel percutaneous system for fracture reduction and stabilization of VCFs by using bone graft. METHODS: This technical note highlights the Optimesh system as an alternative method of minimally invasive VCF reduction and stabilization with the delivery of a bone graft containment device. Instead of using PMMA as in vertebroplasty or kyphoplasty, this system allows the delivery of allograft and/or autograft bone, with its osteoinductive, osteoconductive, and osteogenic properties. CONCLUSIONS: This system allows for restoration of sagittal alignment of the spine with direct control of bone graft delivery by using a mesh graft containment device that allows for ingrowth of new bone and vascular tissue.

Bone Cements↗