Search PubMed⌕ Search

PubMed · 15038549

A slotted waveguide applicator for continuous flow grain drying.

Abstract

A slotted waveguide antenna was designed and developed with series slots cut on the broad side that constituted a popular means of coupling microwaves with grain for drying. The radiating characteristics of the slotted wave guide antenna mounted in a setup that simulated the coupling to a grain conveying tube were studied at a frequency of 2.45 GHz. The antenna consisted of a WR-340 waveguide made of copper. The effect of the slot inclination angle O, moisture content and the shape of the slots were investigated. The results indicated 55 degrees as an optimum slot angle for slots having a width of 13 mm and a length 58 mm. Slots with a width of 6 mm did not exhibit any regular behavior and the effect of O was not clearly identified.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

E St Denis, G S Raghavan, C Akyel, M Venkatesh. 2001. A slotted waveguide applicator for continuous flow grain drying.. https://doi.org/10.1080/08327823.2001.11688444

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Dynamics of spatial heterogeneity of stomatal closure in Tradescantia virginiana altered by growth at high relative air humidity.

The spatial heterogeneity of stomatal closure in response to rapid desiccation of excised well-watered Tradescantia virginiana leaves grown at moderate (55%) or high (90%) relative air humidity (RH) was studied using a chlorophyll fluorescence imaging system under non-photorespiratory conditions. Following rapid desiccation, excised leaves grown at high RH had both a greater heterogeneity and a higher average value of PSII efficiency (Phi(PSII)) compared with leaves grown at moderate RH. Larger decreases in relative water content resulted in smaller decreases in water potential and Phi(PSII) of high RH-grown leaves compared with moderate RH-grown leaves. Moreover, the Phi(PSII) of excised high RH-grown leaves decreased less with decreasing water potential, implying that the stomata of high RH-grown leaves are less sensitive to decreases in leaf water potential compared with moderate RH-grown leaves. After desiccation, some non-closing stomata were distributed around the main vein in high RH-grown leaves. Direct measurements of stomatal aperture showed 77% stomatal closure in the margins after 2 h desiccation compared with 40% closure of stomata in the main-vein areas in high RH-grown leaves. Faster closure of stomata in leaf margins compared with main-vein areas of leaves grown at high RH was related to substantially lower relative water content in these areas of the leaves.

Desiccation↗

Use of dried high-phenolic laden host leaves for virus and viroid preservation and detection by PCR methods.

The efficiency of RNA extraction for Apricot latent virus (ApLV), Plum bark necrosis stem pitting associated virus (PBNSPaV), Prunus necrotic ring spot virus (PNRSV), Potato virus Y (PVY), and Apple scar skin viroid (ASSVd) from infected hosts is of great importance for molecular diagnosis by the polymerase chain reaction (PCR). A method is described for drying tissue to overcome phenolic inhibitors of viral RNA. This study showed that the infected host leaves, dried at 65 degrees C for 2 days and conserved at 4 degrees C in air proof conditions, serve as good sources for detection of viral and viroid pathogens by PCR methods. Preliminary results suggest that ApLV, PNRSV, PVY, and ASSVd were detected easily by reverse transcriptase-polymerase chain reaction (RT-PCR) and PBNSPaV by nested-RT-PCR with high amplification yields. No significant difference was observed between ethidium bromide-stained band profiles of dried compared to fresh leaves of infected samples. The RNA derived from dry leaf samples was suitable for detection studies. This simple and inexpensive method has proved very effective for long term conservation of virus and viroid isolates.

Desiccation↗

Vacuum foam drying for preservation of LaSota virus: effect of additives.

The purpose of this research was to apply vacuum foam drying (VFD) for processing of LaSota virus and to screen formulation additives for its stability. The aqueous dispersion of harvest containing sucrose or trehalose in combination with additive (monosaccharides, polymers, N-Z-amine) was prepared. The diluted dispersions in vials were vacuum concentrated, foamed to form a continuous structure, and vacuum dried. The products were evaluated for foam characteristics, residual moisture, virus titer, x-ray diffraction pattern, and stability profile. The foamability increased with solid content in solutions. The foamability of sucrose was enhanced with incorporation of N-Z-amine (10% and 15% wt/vol) and polyvinyl pyrrolidone (PVP K30, 3% wt/vol). The fructose- or galactose-containing mixtures were deposited irregularly on the vial surface. The virus titer increased with disaccharides in the formulation. Sucrose provided better protection than trehalose. Unlike lyophilization, N-Z-amine with sucrose protected the virus from Millard's Browning. Amino acids do not have a catalytic effect on hydrolysis of sucrose during VFD. Monosaccharides were ineffective. A synergistic effect of PVP K30 or polyethylene glycol 6000 (3% wt/vol) with N-Z-amine provided the maximum virus titer (6.97 and 7.15, respectively). This formulation retained the desired virus potency at 5 degrees , 25 degrees , and 40 degrees C. The diffraction pattern revealed that a threshold concentration of N-Z-amine was required for inhibiting crystallization of sucrose during VFD. VFD was successfully applied to produce a solid LaSota formulation. The products were amorphous and did not devitrify on storage.

Desiccation↗