Search PubMed⌕ Search

PubMed · 13116110

Electrolysis.

Abstract

The source did not provide an abstract. Follow the original record for more information.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A M ROSS. 1953. Electrolysis.. https://pubmed.ncbi.nlm.nih.gov/13116110/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Detoxification of methyl-parathion pesticide in aqueous solutions by electrochemical oxidation.

Commercial methyl-parathion (MeP) was detoxified using an electrochemical method that employed a Ti/Pt anode and stainless steel 304 as cathode. Sodium chloride was added as electrolyte and the mixture was passed through an electrolytic cell for 2 h. Due to the strong oxidizing potential of the produced chemicals, the organic pollutants were wet oxidized to carbon dioxide and water. A number of experiments were run at laboratory scale. Reductions of COD and BOD(5) were both over 80% and the mean energy consumption was 18-8 kWh per kg(-1) COD reduced (COD(r)). The degradation of MeP was more effective when the pH of the brine solution was in the acid range than when it was in the alkaline range. From the results it can be concluded that electrolysis could be used as an oxidation pre-treatment stage for detoxification of toxic wastes with MeP.

Electrolysis↗

Decomposition of ethylene, a flower-senescence hormone, with electrolyzed anode water.

Electrolyzed anode water (EAW) markedly extended the vase life of cut carnation flowers. Therefore, a flower-senescence hormone involving ethylene decomposition by EAW with potassium chloride as an electrolyte was investigated. Ethylene was added externally to EAW, and the reaction between ethylen and the available chlorine in EAW was examined. EAW had a low pH value (2.5), a high concentration of dissolved oxygen, and extremely high redox potential (19.2 mg/l and 1323 mV, respectively) when available chlorine was at a concentration of about 620 microns. The addition of ethylene to EAW led to ethylene decomposition, and an equimolar amount of ethylene chlorohydrine with available chlorine was produced. The ethylene chlorohydrine production was greatly affected by the pH value (pH 2.5, 5.0 and 10.0 were tested), and was faster in an acidic solution. Ethylene chlorohydrine was not produced after ethylene had been added to EAW at pH 2.6 when available chlorine was absent, but was produced after potassium hypochlorite had been added to such EAW. The effect of the pH value of EAW on the vase life of cut carnations was compatible with the decomposition rate of ethylene in EAW of the same pH value. These results suggest that the effect of EAW on the vase life of cut carnations was due to the decomposition of ethylene to ethylene chlorohydrine by chlorine from chlorine compounds.

Electrolysis↗

Immobilization of glucose oxidase in polypyrrole/polytetrahydrofuran graft copolymers.

Glucose oxidase (GOD) was immobilized in four different conducting polymer matrices, namely: polypyrrole, (PPy), poly(pyrrole-graft-polytetrahydrofuran), (1) and (3); and poly(pyrrole-graft-polystyrene/polytetrahydrofuran), (2). The kinetic parameters V(max) and K(m), and the optimum temperature were determined for both immobilized and native enzymes. The effect of electrolysis time and several supporting electrolytes, p-toluenesulfonic acid, p-toluene sulfonic acid (PTSA), sodium p-toluene sulfonate, sodium p-toluene sulfonate (NaPTS), and sodium dodecyl sulfate, sodium dodecyl sulfate (SDS), on enzyme immobilization were investigated. The high K(m) value (59.9 mM) of enzyme immobilized in PPy was decreased via immobilization in graft copolymer matrices of pyrrole. V(max), which was 2.25 mM/min for pure PPy, was found as 4.71 mM/min for compound (3).

Electrolysis↗