PubMed · 12192394
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
Mark Loewen. 2002-08-22. Physical oceanography: inside whitecaps.. https://doi.org/10.1038/418830a
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
The increasing popularity of low-fat products increases the need for a better understanding of how flavor release is affected by partial substitution of fat with hydrocolloids. Partitioning and release of aroma compounds from four pectin gels with different compositions were studied with static headspace and with a model mouth. Air/product partition coefficients determine the potential extent of aroma release, and mass transfer determines the rate at which aroma compounds are released to the vapor phase. This study showed that the gel network had large effects on the partition of aroma compounds between the gel and vapor phase. The specific properties of the aroma compounds were also of importance for the air/gel partition. Storage of the four gels showed that one of the weaker gels was influencing the concentration of aroma compounds in the headspace, probably caused by formation of a denser network over time.
The adsorption of n-alkanethiols onto polycrystalline thin films of palladium containing a strong (111) texture produces well-organized, self-assembled monolayers. The organization of the alkane chains in the monolayer and the nature of the bonding between the palladium and the thiol were studied by contact angle measurements, optical ellipsometry, reflection absorption infrared spectroscopy (RAIRS), and X-ray photoelectron spectroscopy (XPS). The XPS data reveals that a compound palladium-sulfide interphase is present at the surface of the palladium film. The RAIR spectra, ellipsometry data, and wetting properties show that the palladium-sulfide phase is terminated with an organized, methyl-terminated monolayer of alkanethiolates. The local molecular environment of the alkane chains transitions from a conformationally disordered, liquidlike state to a mostly all-trans, crystalline-like structure with increasing chain length (n = 8-26). The intensities and dichroism of the methylene and methyl stretching modes support a model for the average orientation of an ensemble of all-trans-conformer chains with a tilt angle of approximately 14-18 degrees with respect to the surface normal and a twist angle of the CCC plane relative to the tilt plane of approximately 45 degrees. The SAMs are stable in air, although the sulfur present at the surface oxidizes in air over a period of 2-5 days at room temperature. The differences in chain organization between SAMs formed by microcontact printing and by solution deposition are also examined by RAIRS and XPS.
Wastewater containing organics from a semiconductor plant was experimentally investigated in this study. The wastewater is characterized by strong color, high chemical oxygen demand (COD), a large amount of refractory volatile organic compounds and low biodegradability. Because of these characteristics, treatment of this wastewater by traditional activated sludge method is essentially impossible. In the present work, combined physical, chemical and biological methods were synergistically utilized to tackle the wastewater. The combined treatment consisted of air stripping, modified Fenton oxidation and sequencing batch reactor (SBR) method. Air stripping was employed to remove the majority of volatile organic components (notably isopropyl alcohol) from the wastewater, while the Fenton treatment decomposed the remaining refractory organics leading to simultaneous reductions of wastewater COD and color. After proper dilution with other low-strength, organics-containing wastewater stream, the wastewater effluent was finally treated by the SBR method. Experimental tests were conducted to determine the effectiveness and the optimum operating conditions of each treatment process. Test results clearly demonstrated the advantages of the combined treatments. The treatment train was found capable of lowering the wastewater COD concentration from as high as 80,000 mg/l to below 100mg/l and completely eliminating the wastewater color. The overall water quality of the final effluent exceeded the direct discharge standard and the effluent can even be considered for reuse.