Search PubMed⌕ Search

PubMed · 11248885

Multispectral imaging microscope with millisecond time resolution.

Abstract

A new multispectral imaging microscope with micrometer spatial resolution and millisecond temporal resolution has been developed. The imaging microscope is based on the use of an acousto-optic tunable filter (AOTF) for spectral tuning and a progressive scan camera capable of snapshot operation for recording. It can operate in two modes: images are recorded as a function of time or wavelength. When operated as a function of time, the microscope is configured so that as many images as possible are recorded, grabbed, and stored per one wavelength. Upon completion, the AOTF is scanned to a new wavelength, and a new set of images are recorded. Up to 33 images/ second (i.e., 30 ms/image) can be recorded in this mode. In the other configuration, the recording wavelength is rapidly scanned (by means of the AOTF) and only one image is rapidly recorded, grabbed, and stored for each wavelength. Because additional time is needed to scan the AOTF, the maximum number of images can be grabbed in this case is 16 frames/s. Preliminary applications of the imaging microscope include measurements of photoinduced changes of a single unit cell in temperature-sensitive cholesteric liquid crystals as a function of time and wavelength. The changes were found to be varied with time and wavelength. Interestingly, the photoinduced changes of unit cells in the liquid crystal are not the same but different from cell to cell. This imaging microscope is particularly useful for measurements of small-size samples that undergo rapid chemical or biochemical reactions, e.g., activities of a single biological cell.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

O Khait, S Smirnov, C D Tran. 2001-02-15. Multispectral imaging microscope with millisecond time resolution.. https://doi.org/10.1021/ac0007581

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Selective sterol-phospholipid associations in fluid bilayers.

The nearest-neighbor preferences of three exchangeable lipid monomers (two phospholipids that differ in length, A and B, and a derivative of cholesterol, C) have been quantified in the fluid bilayer state by use of the nearest-neighbor recognition method (Davidson, S. K. M.; Regen, S. L. Chem. Rev. 1997, 97, 1269). Thus, an analysis of the equilibrium dimer distributions has shown that (i) the sterol favors both phospholipids as nearest neighbors relative to other sterol molecules, (ii) that this recognition is selective (i.e., the sterol favors the longer phospholipid as a nearest neighbor over the shorter one, especially when the sterol concentrations in the bilayer is high (e.g., 40 mol %), and (iii) the phospholipids, themselves, are unable to recognize each other. Taken together, these findings indicate that the probable mechanism by which cholesterol induces homoassociation of A and B in analogous bilayers is one in which the sterol "pulls" two or more of the longer phospholipid monomers (B) out of a "sea" of randomly mixed A and B. These findings also lend support for the notion of cholesterol-phospholipid complexation in fluid bilayers. The biological implications of these findings are briefly discussed.

Cholesterol↗

Photogeneration and quenching of reactive oxygen species by urocanic acid.

Urocanic acid, UCA, is characterized by two electronic transitions in the UV-B (280-320 nm) which comprise its broad absorption spectrum and give rise to wavelength-dependent isomerization quantum yields. The absorption spectrum of UCA extends into the UV-A (320-400 nm). Given the UV-A component of sunlight is significantly greater than the UV-B component it is hypothesized even weak UV-A photochemistry of UCA could be important for in vivo responses to UV radiation. Degenerate pump-probe experiments performed on t-UCA at several wavelengths in the UV-A reveal an excited-state absorption that undergoes a rapid, approximately 1 ps decay. Photoacoustic experiments performed on both the cis and trans isomers reveal the formation of a long-lived intermediate following UV-A excitation. The efficiency and action spectra for this latter photoactive process are presented and are similar for both isomers of UCA. Cholesterol hydroperoxide assays designed to investigate the nature of the UV-A photoreactivity of t-UCA confirm the production of reactive oxygen species. The bimolecular rate constant for the quenching of singlet oxygen by t-UCA is determined to be 3.5 x 10(6) M(-1) s(-1). Taking into consideration recent theoretical calculations and jet expansion studies of the electronic structure of gas-phase t-UCA, a model is proposed to explain the isomerization and photoreactivity of t-UCA in solution over the UV-A region.

Cholesterol↗