Search PubMed⌕ Search

Biomedical subjects

Z Shriver

Publications and source records attributed to Z Shriver.

15 recordsLinked to original sources

Probing fibroblast growth factor dimerization and role of heparin-like glycosaminoglycans in modulating dimerization and signaling.

For a number of growth factors and cytokines, ligand dimerization is believed to be central to the formation of an active signaling complex. In the case of fibroblast growth factor-2 (FGF2) signaling, heparin/heparan sulfate-like glycosaminoglycans (HLGAGs) are involved through interaction with both FGF2 and its receptors (FGFRs) in assembling a tertiary complex and modulating FGF2 activity. Biochemical data have suggested different modes of HLGAG-induced FGF2 dimerization involving specific protein-protein contacts. In addition, several recent x-ray crystallography studies of FGF.FGFR and FGF.FGFR.HLGAG complexes have revealed other modes of molecular assemblage, with no FGF-FGF contacts. All these different biochemical and structural findings have clarified less and in fact raised more questions as to which mode of FGF2 dimerization, if any, is essential for signaling. In this study, we address the issue of FGF2 dimerization in signaling using a combination of biochemical, biophysical, and site-directed mutagenesis approaches. Our findings presented here provide direct evidence of FGF2 dimerization in mediating FGF2 signaling.

Animals↗

Crystal structure of fibroblast growth factor 9 reveals regions implicated in dimerization and autoinhibition.

Fibroblast growth factors (FGFs) constitute a large family of heparin-binding growth factors with diverse biological activities. FGF9 was originally described as glia-activating factor and is expressed in the nervous system as a potent mitogen for glia cells. Unlike most FGFs, FGF9 forms dimers in solution with a K(d) of 680 nm. To elucidate the molecular mechanism of FGF9 dimerization, the crystal structure of FGF9 was determined at 2.2 A resolution. FGF9 adopts a beta-trefoil fold similar to other FGFs. However, unlike other FGFs, the N- and C-terminal regions outside the beta-trefoil core in FGF9 are ordered and involved in the formation of a 2-fold crystallographic dimer. A significant surface area (>2000 A(2)) is buried in the dimer interface that occludes a major receptor binding site of FGF9. Thus, we propose an autoinhibitory mechanism for FGF9 that is dependent on sequences outside of the beta-trefoil core. Moreover, a model is presented providing a molecular basis for the preferential affinity of FGF9 toward FGFR3.

Amino Acid Sequence↗

Sequencing of 3-O sulfate containing heparin decasaccharides with a partial antithrombin III binding site.

Heparin- and heparan sulfate-like glycosaminoglycans (HLGAGs) represent an important class of molecules that interact with and modulate the activity of growth factors, enzymes, and morphogens. Of the many biological functions for this class of molecules, one of its most important functions is its interaction with antithrombin III (AT-III). AT-III binding to a specific heparin pentasaccharide sequence, containing an unusual 3-O sulfate on a N-sulfated, 6-O sulfated glucosamine, increases 1,000-fold AT-III's ability to inhibit specific proteases in the coagulation cascade. In this manner, HLGAGs play an important biological and pharmacological role in the modulation of blood clotting. Recently, a sequencing methodology was developed to further structure-function relationships of this important class of molecules. This methodology combines a property-encoded nomenclature scheme to handle the large information content (properties) of HLGAGs, with matrix-assisted laser desorption ionization MS and enzymatic and chemical degradation as experimental constraints to rapidly sequence picomole quantities of HLGAG oligosaccharides. Using the above property-encoded nomenclature-matrix-assisted laser desorption ionization approach, we found that the sequence of the decasaccharide used in this study is DeltaU(2S)H(NS,6S)I(2S)H(NS, 6S)I(2S)H(NS,6S)IH(NAc,6S)GH(NS,3S,6S) (+/-DDD4-7). We confirmed our results by using integral glycan sequencing and one-dimensional proton NMR. Furthermore, we show that this approach is flexible and is able to derive sequence information on an oligosaccharide mixture. Thus, this methodology will make possible both the analysis of other unusual sequences in HLGAGs with important biological activity as well as provide the basis for the structural analysis of these pharamacologically important group of heparin/heparan sulfates.

Antithrombin III↗

Cleavage of the antithrombin III binding site in heparin by heparinases and its implication in the generation of low molecular weight heparin.

Heparin has been used as a clinical anticoagulant for more than 50 years, making it one of the most effective pharmacological agents known. Much of heparin's activity can be traced to its ability to bind antithrombin III (AT-III). Low molecular weight heparin (LMWH), derived from heparin by its controlled breakdown, maintains much of the antithrombotic activity of heparin without many of the serious side effects. The clinical significance of LMWH has highlighted the need to understand and develop chemical or enzymatic means to generate it. The primary enzymatic tools used for the production of LMWH are the heparinases from Flavobacterium heparinum, specifically heparinases I and II. Using pentasaccharide and hexasaccharide model compounds, we show that heparinases I and II, but not heparinase III, cleave the AT-III binding site, leaving only a partially intact site. Furthermore, we show herein that glucosamine 3-O sulfation at the reducing end of a glycosidic linkage imparts resistance to heparinase I, II, and III cleavage. Finally, we examine the biological and pharmacological consequences of a heparin oligosaccharide that contains only a partial AT-III binding site. We show that such an oligosaccharide lacks some of the functional attributes of heparin- and heparan sulfate-like glycosaminoglycans containing an intact AT-III site.

Antithrombin III↗

Histidine 295 and histidine 510 are crucial for the enzymatic degradation of heparan sulfate by heparinase III.

The heparinases from Flavobacterium heparinum are powerful tools in understanding how heparin-like glycosaminoglycans function biologically. Heparinase III is the unique member of the heparinase family of heparin-degrading lyases that recognizes the ubiquitous cell-surface heparan sulfate proteoglycans as its primary substrate. Given that both heparinase I and heparinase II contain catalytically critical histidines, we examined the role of histidine in heparinase III. Through a series of diethyl pyrocarbonate modification experiments, it was found that surface-exposed histidines are modified in a concentration-dependent fashion and that this modification results in inactivation of the enzyme (k(inact) = 0.20 +/- 0.04 min(-)(1) mM(-)(1)). The DEPC modification was pH dependent and reversible by hydroxylamine, indicating that histidines are the sole residue being modified. As previously observed for heparinases I and II, substrate protection experiments slowed the inactivation kinetics, suggesting that the modified residue(s) was (were) in or proximal to the active site of the enzyme. Proteolytic mapping experiments, taken together with site-directed mutagenesis studies, confirm the chemical modification experiments and point to two histidines, histidine 295 and histidine 510, as being essential for heparinase III enzymatic activity.

Animals↗

Heparan sulfate D-glucosaminyl 3-O-sulfotransferase-3A sulfates N-unsubstituted glucosamine residues.

3-O-Sulfation of glucosamine by heparan sulfate D-glucosaminyl 3-O-sulfotransferase (3-OST-1) is the key modification in anticoagulant heparan sulfate synthesis. However, the heparan sulfates modified by 3-OST-2 and 3-OST-3A, isoforms of 3-OST-1, do not have anticoagulant activity, although these isoforms transfer sulfate to the 3-OH position of glucosamine residues. In this study, we characterize the substrate specificity of purified 3-OST-3A at the tetrasaccharide level. The 3-OST-3A enzyme was purified from Sf9 cells infected with recombinant baculovirus containing 3-OST-3A cDNA. Two 3-OST-3A-modified tetrasaccharides were purified from the 3-O-(35)S-sulfated heparan sulfate that was digested by heparin lyases. These tetrasaccharides were analyzed using nitrous acid and enzymatic degradation combined with matrix-assisted laser desorption/ionization-mass spectrometry. Two novel tetrasaccharides were discovered with proposed structures of DeltaUA2S-GlcNS-IdoUA2S-[(35)S]GlcNH(2)3S and DeltaUA2S-GlcNS-IdoUA2S-[3-(35)S]GlcNH(2)3S6S . The results demonstrate that 3-OST-3A sulfates N-unsubstituted glucosamine residues, and the 3-OST-3A modification sites are probably located in defined oligosaccharide sequences. Our study suggests that oligosaccharides with N-unsubstituted glucosamine are precursors for sulfation by 3-OST-3A. The intriguing linkage between N-unsubstituted glucosamine and the 3-O-sulfation by 3-OST-3A may provide a clue to the potential biological functions of 3-OST-3A-modified heparan sulfate.

Animals↗

Sequencing complex polysaccharides.

Although rapid sequencing of polynucleotides and polypeptides has become commonplace, it has not been possible to rapidly sequence femto- to picomole amounts of tissue-derived complex polysaccharides. Heparin-like glycosaminoglycans (HLGAGs) were readily sequenced by a combination of matrix-assisted laser desorption ionization mass spectrometry and a notation system for representation of polysaccharide sequences. This will enable identification of sequences that are critical to HLGAG biological activities in anticoagulation, cell growth, and differentiation.

Carbohydrate Sequence↗

Oligomeric self-association of basic fibroblast growth factor in the absence of heparin-like glycosaminoglycans.

Basic fibroblast growth factor (FGF-2) represents a class of heparin-binding growth factors that are stored in the extracellular matrix attached to heparin-like glycosaminoglycans (HLGAGs). It has been proposed that cell surface HLGAGs have a central role in the biological activity of FGF-2, presumably by inducing dimers or oligomers of FGF-2 and leading to the dimerization or oligomerization of FGF receptor and hence signal transduction. We have previously proposed that FGF-2 possesses a natural tendency to self-associate to form FGF-2 dimers and oligomers; HLGAGs would enhance FGF-2 self-association. Here, through a combination of spectroscopic, chemical cross-linking and spectrometric techniques, we provide direct evidence for the self-association of FGF-2 in the absence of HLGAGs, defying the notion that HLGAGs induce FGF-2 oligomerization. Further, the addition of HLGAGs seems to enhance significantly the FGF-2 oligomerization process without affecting the relative percentages of FGF-2 dimers, trimers or oligomers. FGF-2 self-association is consistent with FGF-2's possessing biological activity both in the presence and in the absence of HLGAGs; this leads us to propose that FGF-2 self-association enables FGF-2 to signal both in the presence and in the absence of HLGAGs.

Biopolymers↗

Fibroblast growth factors 1 and 2 are distinct in oligomerization in the presence of heparin-like glycosaminoglycans.

Fibroblast growth factor (FGF) 1 and FGF-2 are prototypic members of the FGF family, which to date comprises at least 18 members. Surprisingly, even though FGF-1 and FGF-2 share more than 80% sequence similarity and an identical structural fold, these two growth factors are biologically very different. FGF-1 and FGF-2 differ in their ability to bind isoforms of the FGF receptor family as well as the heparin-like glycosaminoglycan (HLGAG) component of proteoglycans on the cell surface to initiate signaling in different cell types. Herein, we provide evidence for one mechanism by which these two proteins could differ biologically. Previously, it has been noted that FGF-1 and FGF-2 can oligomerize in the presence of HLGAGs. Therefore, we investigated whether FGF-1 and FGF-2 oligomerize by the same mechanism or by a different one. Through a combination of matrix-assisted laser desorption ionization mass spectrometry and chemical crosslinking, we show here that, under identical conditions, FGF-1 and FGF-2 differ in the degree and kind of oligomerization. Furthermore, an extensive analysis of FGF-1 and FGF-2 uncomplexed and HLGAG complexed crystal structures enables us to readily explain why FGF-2 forms sequential oligomers whereas FGF-1 forms only dimers. FGF-2, which possesses an interface capable of protein association, forms a translationally related oligomer, whereas FGF-1, which does not have this interface, forms only a symmetrically related dimer. Taken together, these data show that FGF-1 and FGF-2, despite their sequence homology, differ in their mechanism of oligomerization.

Binding Sites↗

Biochemical investigations and mapping of the calcium-binding sites of heparinase I from Flavobacterium heparinum.

The heparinases from Flavobacterium heparinum are lyases that specifically cleave heparin-like glycosaminoglycans. Previously, amino acids located in the active site of heparinase I have been identified and mapped. In an effort to further understand the mechanism by which heparinase I cleaves its polymer substrate, we sought to understand the role of calcium, as a necessary cofactor, in the enzymatic activity of heparinase I. Specifically, we undertook a series of biochemical and biophysical experiments to answer the question of whether heparinase I binds to calcium and, if so, which regions of the protein are involved in calcium binding. Using the fluorescent calcium analog terbium, we found that heparinase I tightly bound divalent and trivalent cations. Furthermore, we established that this interaction was specific for ions that closely approximate the ionic radius of calcium. Through the use of the modification reagents N-ethyl-5-phenylisoxazolium-3'-sulfonate (Woodward's reagent K) and 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride, we showed that the interaction between heparinase I and calcium was essential for proper functioning of the enzyme. Preincubation with either calcium alone or calcium in the presence of heparin was able to protect the enzyme from inactivation by these modifying reagents. In addition, through mapping studies of Woodward's reagent K-modified heparinase I, we identified two putative calcium-binding sites, CB-1 (Glu207-Ala219) and CB-2 (Thr373-Arg384), in heparinase I that not only are specifically modified by Woodward's reagent K, leading to loss of enzymatic activity, but also conform to the calcium-coordinating consensus motif.

Amino Acid Sequence↗

The calcium-binding sites of heparinase I from Flavobacterium heparinum are essential for enzymatic activity.

In the accompanying paper (Shriver, Z., Liu, D., Hu, Y., and Sasisekharan, R. (1999) J. Biol. Chem. 274, 4082-4088), we have shown that calcium binds specifically to heparinase I and have identified two major calcium-binding sites (CB-1 and CB-2) that partly conform to the EF-hand calcium-binding motif. In this study, through systematic site-directed mutagenesis, we have confirmed the accompanying biochemical studies and have shown that both CB-1 and CB-2 are involved in calcium binding and enzymatic activity. More specifically, we identified critical residues (viz. Asp210, Asp212, Gly213, and Thr216 in CB-1 and Asn375, Tyr379, and Glu381 in CB-2) that are important for calcium binding and heparinase I enzymatic activity. Mutations in CB-1 resulted in a lower kcat, but did not change the product profile of heparinase I action on heparin; conversely, mutations in CB-2 not only altered the kcat for heparinase I, but also resulted in incomplete degradation, leading to longer saccharides. Fluorescence competition experiments along with heparin affinity chromatography suggested that mutations in CB-1 alter heparinase I activity primarily through decreasing the enzyme's affinity for its calcium cofactor without altering heparin binding to heparinase I. Compared with CB-1 mutations, mutations in CB-2 affected calcium binding to a lesser extent, but they had a more pronounced effect on heparinase I activity, suggesting a different role for CB-2 in the enzymatic action of heparinase I. These results, taken together with our accompanying study, led us to propose a model for calcium binding to heparinase I that includes both CB-1 and CB-2 providing critical interactions, albeit via a different mechanism. Through binding to CB-1 and/or CB-2, we propose that calcium may play a role in the catalytic mechanism and/or in the exolytic processive mechanism of heparin-like glycosaminoglycan depolymerization by heparinase I.

Amino Acid Sequence↗

Mass spectrometric evidence for the enzymatic mechanism of the depolymerization of heparin-like glycosaminoglycans by heparinase II.

Heparin-like glycosaminoglycans, acidic complex polysaccharides present on cell surfaces and in the extracellular matrix, regulate important physiological processes such as anticoagulation and angiogenesis. Heparin-like glycosaminoglycan degrading enzymes or heparinases are powerful tools that have enabled the elucidation of important biological properties of heparin-like glycosaminoglycans in vitro and in vivo. With an overall goal of developing an approach to sequence heparin-like glycosaminoglycans using the heparinases, we recently have elaborated a mass spectrometry methodology to elucidate the mechanism of depolymerization of heparin-like glycosaminoglycans by heparinase I. In this study, we investigate the mechanism of depolymerization of heparin-like glycosaminoglycans by heparinase II, which possesses the broadest known substrate specificity of the heparinases. We show here that heparinase II cleaves heparin-like glycosaminoglycans endolytically in a nonrandom manner. In addition, we show that heparinase II has two distinct active sites and provide evidence that one of the active sites is heparinase I-like, cleaving at hexosamine-sulfated iduronate linkages, whereas the other is presumably heparinase III-like, cleaving at hexosamine-glucuronate linkages. Elucidation of the mechanism of depolymerization of heparin-like glycosaminoglycans by the heparinases and mutant heparinases could pave the way to the development of much needed methods to sequence heparin-like glycosaminoglycans.

Binding Sites↗

Heparinase II from Flavobacterium heparinum. Role of cysteine in enzymatic activity as probed by chemical modification and site- directed mutagenesis.

Heparinase II (no EC number) is one of three lyases isolated from Flavobacterium heparinum that degrade heparin-like complex polysaccharides. Heparinase II is unique among the heparinases in that it has broad substrate requirements and possesses the ability to degrade both heparin and heparan sulfate-like regions of glycosaminoglycans. This study set out to investigate the role of cysteines in heparinase II activity. Through a series of chemical modification experiments, it was found that one of the three cysteines in heparinase II is surface-accessible and possesses unusual chemical reactivity toward cysteine-specific chemical modifying reagents. Substrate protection experiments suggest that this surface-accessible cysteine is proximate to the active site, since addition of substrate shields the cysteine from modifying reagents. The cysteine, present in an ionic environment, was mapped by radiolabeling with N-[3H]ethylmaleimide and identified as cysteine 348. Site-directed mutagenesis of cysteine 348 to an alanine resulted in loss of activity toward heparin but not heparan sulfate, indicating that cysteine 348 is required for heparinase II activity toward heparin but is not essential for the breakdown of heparan sulfate. Furthermore, we show in this study that cysteine 164 and cysteine 189 are functionally unimportant for heparinase II.

Binding Sites↗

Heparinase II from Flavobacterium heparinum. Role of histidine residues in enzymatic activity as probed by chemical modification and site-directed mutagenesis.

The three heparinases derived from Flavobacterium heparinum are powerful tools for studying heparin-like glycosaminoglycans in major biological processes, including angiogenesis and development. Heparinase II is unique among the three enzymes because it is able to catalytically cleave both heparin and heparan sulfate-like regions of heparin-like glycosaminoglycans. Toward understanding the catalytic mechanism of heparin-like glycosaminoglycan degradation by heparinase II, we set out to investigate the role of the histidines of heparinase II in catalysis. We observe concentration-dependent inactivation of heparinase II in the presence of the reversible histidine-modifying reagent diethylpyrocarbonate (DEPC). With heparin as the substrate, the rate constant of inactivation was found to be 0.16 min-1 mM-1; with heparan sulfate as the substrate, the rate constant was determined to be 0.24 min-1 mM-1. Heparinase II activity is restored following hydroxylamine treatment. This, along with other experiments, strongly suggests that the inactivation of heparinase II by DEPC is specific for histidine residues and that three histidines are modified by DEPC. Substrate protection experiments show that heparinase II preincubation with heparin followed by the addition of DEPC resulted in a loss of enzymatic activity toward heparan sulfate but not heparin. However, heparinase II preincubation with heparan sulfate was unable to protect heparinase II from DEPC inactivation for either of the substrates. Proteolytic mapping studies with Lys-C were consistent with the chemical modification experiments and identified histidines 238, 451, and 579 as being important for heparinase II activity. Further mapping studies identified histidine 451 as being essential for heparin degradation. Site-directed mutagenesis experiments on the 13 histidines of heparinase II corroborated the chemical modification and the peptide mapping studies, establishing the importance of histidines 238, 451 and 579 in heparinase II activity.

Binding Sites↗