Search PubMed⌕ Search

Biomedical subjects

Timothy M Swager

Publications and source records attributed to Timothy M Swager.

At least 37 records · Page 2Linked to original sources

Intramolecular photoinduced charge transfer in rotaxanes.

We report the synthesis and photophysical investigation of a series of rotaxanes in which the physical confinement of the donor and acceptor (DA) pair leads, in some cases, to emissive exciplexes. As a comparison, we examined the photoinduced charge-transfer processes in the same DA mixtures under intermolecular conditions. The interlocked configuration of the rotaxane facilitates pi orbital overlap of the excited state DA pair by keeping their center-to-center distance extremely small. This increased interaction between the DA pair significantly lowers the activation energy for exciplex formation (E(a)) and helps stabilize the highly polar charge-transfer complex. We find that the stabilizing effect of the rotaxane architecture compensates for the modest thermodynamic driving force for some charge-transfer interactions. In addition, we examined the temperature dependence on the rotaxanes' optical properties. Metal coordination to the tetrahedral cavity disrupts the cofacial conformation of the DA pair and quenches the fluorescence. Binding of alkali metal ions to the 3,4-ethylenedioxythiophene (EDOT)-based rotaxane, however, gives rise to the emergence of a new weak emission band at even lower energies, indicative of a new emissive exciplex.

Journal Article↗

Sensitivity gains in chemosensing by lasing action in organic polymers.

Societal needs for greater security require dramatic improvements in the sensitivity of chemical and biological sensors. To meet this challenge, increasing emphasis in analytical science has been directed towards materials and devices having highly nonlinear characteristics; semiconducting organic polymers (SOPs), with their facile excited state (exciton) transport, are prime examples of amplifying materials. SOPs have also been recognized as promising lasing materials, although the susceptibility of these materials to optical damage has thus far limited applications. Here we report that attenuated lasing in optically pumped SOP thin films displays a sensitivity to vapours of explosives more than 30 times higher than is observed from spontaneous emission. Critical to this achievement was the development of a transducing polymer with high thin-film quantum yield, a high optical damage threshold in ambient atmosphere and a record low lasing threshold. Trace vapours of the explosives 2,4,6-trinitrotoluene (TNT) and 2,4-dinitrotoluene (DNT) introduce non-radiative deactivation pathways that compete with stimulated emission. We demonstrate that the induced cessation of the lasing action, and associated sensitivity enhancement, is most pronounced when films are pumped at intensities near their lasing threshold. The combined gains from amplifying materials and lasing promise to deliver sensors that can detect explosives with unparalleled sensitivity.

Journal Article↗

Synthesis and application of poly(phenylene ethynylene)s for bioconjugation: a conjugated polymer-based fluorogenic probe for proteases.

A set of carboxylate-functionalized poly(phenylene ethynylene)s (PPEs) has been synthesized in which the carboxylic acid groups are separated from the polymer backbone by oligo(ethylene glycol) spacer units. These polymers are soluble in water and organic solvents and have photophysical properties that are sensitive to solvent conditions, with high salt content and the absence of surfactant promoting the formation of aggregates of relatively low quantum yield and long fluorescence lifetime. Quenching of these materials by the dinitrophenyl (DNP) chromophore (K(SV) approximately 10(4)) is also highly solvent-dependent. The presence of carboxylate groups far from the polymer backbone appended to each repeating unit allows for the postpolymerization modification of these PPEs with peptides by methods analogous to those described for carboxylate-functionalized small-molecule dyes. Covalent attachment of the fluorescence-quenching 14-mer Lys(DNP)-GPLGMRGLGGGGK to the PPE results in a nonemissive substrate whose fluorescence is restored upon treatment with trypsin. The rate of fluorescence turn-on in this case is increased 3-fold by the presence of surfactant, though the actual rate of peptide hydrolysis remains the same. A small-molecule mimic of the polymer-peptide system shows a smaller fluorescence enhancement upon treatment with trypsin, illustrating the value of polymer-based amplification in this sensory scheme.

Biosensing Techniques↗

Blue electroluminescence from oxadiazole grafted poly(phenylene-ethynylene)s.

Blue poly(phenylene-ethynylene) (PPE) electroluminescence is achieved in a single layer organic light emitting device. The polymeric system consists of an oxadiazole grafted PPE, which combines the necessary charge transport properties while maintaining the desirable efficient, narrow light-emitting properties of the PPE. Incorporation of a pentiptycene scaffold within the PPE structure prevents ground-state and excited-state interactions between the pendent oxadiazole units and the conjugated backbone.

Color↗

Ultra-photostable n-type PPVs.

Poly(p-phenylenevinylene)s containing trifluoromethyl substituted aromatic rings (CF3-PPVs) exhibit high photooxidative stability to give robust materials suitable for demanding applications.

Journal Article↗

Detection of bacteria with carbohydrate-functionalized fluorescent polymers.

Many pathogens that infect humans use cell surface carbohydrates as receptors to facilitate cell-cell adhesion. The hallmark of these interactions is their multivalency, or the simultaneous occurrence of multiple interactions. We have used a carbohydrate-functionalized fluorescent polymer, which displays many carbohydrate ligands on a single polymer chain, to allow for multivalent detection of pathogens. Incubation of a mannose-functionalized polymer with Escherichia coli yields brightly fluorescent aggregates of bacteria. These results show that carbohydrate-functionalized fluorescent polymers are a versatile detection method for bacteria. Future design of detectors for other pathogens only requires information on the carbohydrates bound by the organisms, which has been exhaustively reported in the literature.

Animals↗

Conducting metallopolymers: the roles of molecular architecture and redox matching.

Recent reports of highly conductive metallopolymers are reviewed. This literature is classified into one of two categories (inner or outer sphere) depending on the mode of interaction between the transition metal centers with each other and the conducting polymer backbone. The critical nature of charge transport is discussed in the context of the relative energies of the organic polymer-based and metal-centered redox processes. Also included are recent advances in the development of functional materials based on metal-containing conducting polymers.

Journal Article↗

Dynamic nuclear polarization with biradicals.

Dynamic nuclear polarization (DNP) experiments in rotating solids have been performed for the first time using biradicals rather than monomeric paramagnetic centers as polarizing agents. Specifically, two TEMPO radicals were tethered with a poly(ethylene glycol) chain of variable length where the number of glycol units was 2, 3, or 4. NMR experiments show that the signal observed in DNP experiments is approximately inversely proportional to the length of the chain. Thus, the shorter chain with larger electron dipolar couplings yields larger enhancements. The size of the enhancement is a factor of 4 larger than obtained with the identical concentration of monomeric nitroxide radicals achieving a value of approximately 175 for the n = 2 chain.

Cyclic N-Oxides↗

Rotaxanated conjugated sensory polymers.

Two highly emissive conjugated polymers with tethered rotaxane repeat units are reported. Hydrogen bonding between acidic alcohols and the N-heteroaromatic groups in the rotaxanes attenuates polymer fluorescence. In addition, the rotaxane groups create precise three-dimensional pockets for metal binding, which results in fluorescence quenching. Exposing thin films of Zn-doped polymers to alcohol vapors reverses the quenching by up to 25%.

Journal Article↗

Hyperconjugative and inductive perturbations in poly(p-phenylene vinylenes).

New polymers having high solid-state fluorescence quantum yields and the ability to tune their electron affinity without effecting their band gap using hyperconjugative interactions is reported. The novel three-dimensional poly(phenylene vinylenes) having [2.2.2] bicyclic ring systems shown were synthesized, and the different hyperconjugative perturbations provide differential fluorescence sensory quenching responses to electron-rich and electron-deficient analytes in solution and solid thin films.

Journal Article↗

Molecular design of free volume as a route to low-kappa dielectric materials.

Polymers incorporating the triptycene subunit were prepared for the molecular-level design of low dielectric constant (low-kappa) materials that can be used to manufacture faster integrated circuits. Triptycenes having restricted rotation by multiple point attachment to the polymer backbone are shown to introduce free volume into the films, thereby lowering their dielectric constants. The triptycene containing polymers exhibit a number of desirable properties including low-water absorption and high thermal stability. Systematic studies wherein comparisons are made between two separate classes of triptycene polymers and their non-triptycene containing analogues demonstrate that proper insertion of triptycenes into a polymer backbone can give rise to a reduction in the material's dielectric constant while also improving its mechanical properties. These characteristics are desired by the semiconductor industry for the next generation of microprocessors and memory to provide insulation of the increasingly shrinking features.

Journal Article↗

Polarized photoluminescence from poly(p-phenylene-ethynylene) via a block copolymer nanotemplate.

A new approach based on a conjugated polymer/block copolymer guest/host system for the generation of polarized photoluminescence is reported. Synthetic modification of a poly(p-phenylene-ethynylene) (PPE) conjugated polymer is used for domain-specific incorporation into a cylindrical morphology block copolymer host matrix. Subsequent ordering of the host nanostructure via roll cast processing templates uniaxial alignment of the guest PPE. The ordered films are optically anisotropic displaying both polarized absorption with a dichroic ratio of 3.0 at 440 nm and polarized emission with a polarization ratio of 7.3 at 472 nm.

Journal Article↗

Defining space around conducting polymers: reversible protonic doping of a canopied polypyrrole.

A canopy-shaped pyrrole derivative 2 was prepared, in which a sterically demanding pendant group is juxtaposed to the pyrrole fragment to minimize interstrand pi-pi stacking interactions in the resulting polymer. Anodic polymerization of 2 afforded highly conductive poly(2), the electronic structure of which was probed by various spectroelectrochemical techniques. A limited charge delocalization within poly(2) translates into a well-defined conductivity profile, properties important for resistivity-based sensing. Notably, the bulk conductivity was precisely modulated by a rapid and reversible deprotonation and reprotonation of the polymer backbone.

Journal Article↗

Fluorescent detection of chemical warfare agents: functional group specific ratiometric chemosensors.

Indicators providing highly sensitive and functional group specific fluorescent response to diisopropyl fluorophosphate (DFP, a nerve gas (G-agent) simulant) are reported. Nonemissive indicator 2 reacts with DFP to give a cyclized compound 2+A- that shows a high emission due to its highly planar and rigid structure. Very weak emission was observed by the addition of HCl. Another indicator based on pyridyl naphthalene exhibits a large shift in its emission spectrum after reaction with DFP, which provides for quantitative ratiometric detection.

Chemical Warfare Agents↗