Search PubMed⌕ Search

Biomedical subjects

Timothy M Swager

Publications and source records attributed to Timothy M Swager.

At least 19 recordsLinked to original sources
PubMed2007

Quantification of amplified quenching for conjugated polymer microsphere systems.

A series of nonaggregating carboxylate-functionalized poly(phenylene ethynylene)s (PPEs) have been synthesized for immobilization via electrostatic adsorption onto Eu3+-polystyrene microspheres with a mean diameter of 0.2 microm. This system is shown to constitute a ratiometric system that measures fluorescence quenching with high fidelity. The fluorescence quenching properties of the polymer-coated particles in response to methyl viologen and a naphthyl-functionalized viologen have been investigated in aqueous solutions to study the influence of electrostatic and hydrophobic interactions with pentiptycene-incorporated as well as macrocycle-containing polymers.

Alkynes↗
PubMed2006

Dark-field oxidative addition-based chemosensing: new bis-cyclometalated PtII complexes and phosphorescent detection of cyanogen halides.

Heavy metal complexes that are phosphorescent at room temperature are becoming increasingly important in materials chemistry, principally due to their use in phosphorescent organic light-emitting devices (OLEDs). Their use in optical sensory schemes, however, has not been heavily explored. Homoleptic bis-cyclometalated Pt(II) complexes are known to undergo oxidative addition with appropriate electrophiles (principally alkyl halides) by either thermal or photochemical activation. We have applied this general reaction scheme to the development of a phosphorescence-based sensing system for cyanogen halides. To carry out structure-property relationship studies, a series of previously unreported Pt(II) complexes was prepared. Most of the complexes (excluding those that incorporated substituents on the ligands that forced steric crowding in the square plane) were strongly orange-red phosphorescent (Phi = 0.2-0.3) in a room-temperature oxygen-free solution. These sterically demanding ligands also accelerated the addition of cyanogen bromide to these complexes but slowed the addition of methyl iodide, indicating that the oxidative addition mechanisms for these two electrophiles is different. The lack of solvent-polarity effect on the addition of BrCN suggests a radical mechanism. Oxidative addition of BrCN to the metal complexes in solution or dispersed in poly(methyl methacrylate) gave blue-shifted emissive Pt(IV) complexes. The blue-shifted products give a dark-field sensing scheme that is in sharp contrast to energy transfer-based sensing schemes, which have limited signal-to-noise because of the presence of lower-energy vibronic bands of the energy donor that can overlap with the emission of the acceptor.

Crystallography, X-Ray↗
PubMed2006

Conducting metallopolymers based on azaferrocene.

A series of 2,5-thiophene-substituted 1',2',3',4',5'-pentamethylazaferrocene complexes were synthesized and electropolymerized to produce polymers with fully pi-conjugated backbones. The length and hence oxidation potential of the conjugated linker (the thiophene fragments) between the metal centers were varied to understand the influence of the metal-metal interactions on the overall electroactivity of the resulting polymer. These complexes were electrochemically polymerized, and the resulting polymers were characterized by cyclic voltammetry, in situ conductivity, and spectroelectrochemistry measurements. The iron-centered oxidations significantly increased the conductivity of the polymer. The results reveal that shorter conjugated linkers cause the onset of conductivity to occur at lower potentials. This effect implies that a superexchange mechanism is likely operative in the charge migration of these polymers.

Aza Compounds↗
PubMed2006

Increased alignment of electronic polymers in liquid crystals via hydrogen bonding extension.

Crucial for the development of enhanced electrooptic materials is the construction of highly anisotropic materials. Nematic liquid crystals are able to control the chain conformation and alignment of poly(phenylene ethynylene)s (PPEs), producing electronic polymers with chain-extended planar conformations for improved transport properties. Here, we show that the dichroic ratio, and hence polymer alignment, increases dramatically when interpolymer interactions are introduced by end capping the PPE with hydrogen bonding groups. This increased order can be readily turned off by the introduction of a competing monofunctionalized hydrogen bonding compound. The formation of hydrogen bonds between the polymers results in the formation of gels and elastomers which may be of interest for future applications.

Journal Article↗
PubMed2006

Conjugated polymers in an arene sandwich.

A series of poly(p-arylene butadiynylene)s containing zero, one, and two co-facial pi-pi interactions per repeat unit were synthesized and characterized. A surprisingly selective and high-yielding Diels-Alder cycloaddition of anthracene and nonsymmetric, sterically hindered anhydrides proved essential to generating the cofacial arene-containing monomers. Single-crystal X-ray structures display nearly parallel cofacial arenes that are within the van der Waals contact distances. The precursor molecules with cofacial arenes undergo reversible one- and two-electron oxidations to the radical cation and dication in CH2Cl2. The anhydrides were converted to N-alkyl imides to increase the solubility. High-molecular weight poly(p-arylene butadiynylene)s were prepared via Pd/Cu(I)/benzoquinone oxidative coupling of the diacetylene monomers. The resulting polymers are highly emissive in solution and thin films. The ionization potentials were measured using ultraviolet photoelectron spectroscopy with thin films. Last, fluorescence measurements of polymer thin films during continuous irradiation indicate that the most hindered polymer is more resistant to photobleaching.

Journal Article↗
PubMed2006

TOTAPOL: a biradical polarizing agent for dynamic nuclear polarization experiments in aqueous media.

In a previous publication, we described the use of biradicals, in that case two TEMPO molecules tethered by an ethylene glycol chain of variable length, as polarizing agents for microwave driven dynamic nuclear polarization (DNP) experiments. The use of biradicals in place of monomeric paramagnetic centers such as TEMPO yields enhancements that are a factor of approximately 4 larger (epsilon approximately 175 at 5 T and 90 K) and concurrently the concentration of the polarizing agent is a factor of 4 smaller (10 mM electron spins), reducing the residual electron nuclear dipole broadening. In this paper we describe the synthesis and characterization by EPR and DNP/NMR of an improved polarizing agent 1-(TEMPO-4-oxy)-3-(TEMPO-4-amino)propan-2-ol (TOTAPOL). Under the same experimental conditions and using 2.5 mm magic angle rotors, this new biradical yields larger enhancements (epsilon approximately 290) at lower concentrations (6 mM electron spins) and has the additional important property that it is compatible with experiments in aqueous media, including salt solutions commonly used in the study of proteins and nucleic acids.

Cyclic N-Oxides↗
PubMed2006

Probing a conjugated polymer's transfer of organization-dependent properties from solutions to films.

The dynamic transfer of a conjugated polymer's organization-dependent properties from the solution state to the solid film state was probed by circularly polarized luminescence (CPL) and circular dichroism (CD) spectroscopy. Different supramolecular organizations within films and aggregate solutions of a chiral poly(p-phenylenevinylene) derivative led to opposite CPL and CD spectra. These dramatic property differences were controlled by regulating the polymer's self-assembly through solvent selection and film annealing. Therefore, different processing conditions can greatly affect the functional properties of conjugated polymer films employed in various optoelectronic applications.

Journal Article↗
PubMed2006

Tunable columnar mesophases utilizing C2 symmetric aromatic donor-acceptor complexes.

Derivatives of relatively electron rich 1,5-dialkoxynaphthalene (Dan) donors and relatively electron deficient 1,4,5,8-naphthalenetetracarboxylic diimide (Ndi) acceptors have been exploited in the folding and self-assembly of a variety of complex molecular systems in solution. Here, we report the use of Dan and Ndi derivatives to direct assembly of extended columns with alternating face-centered stacked structure in the solid state. A variety of 1:1 Dan:Ndi mixtures produced mesophases that were found to be stable over temperature ranges extending up to 110 degrees C. Analysis of these mesophases indicates mixtures with soft/plastic crystal phases and a few mixtures with the thermodynamic properties of true liquid crystals, all composed of alternating donor-acceptor columns within. Importantly, a correspondence was found between the clearing and crystallization points of the mesophase mixtures and the melting/clearing points of the component Ndi and Dan units, respectively. This correspondence enables the predictable tuning of mesophase phase transition temperatures. The study of sterically hindered derivatives led to a set of mixtures in which a dramatic and sudden color change (deep red to yellow) was observed upon crystallization of the mesophase due to a phase separation of the component donor and acceptor units.

Biomimetic Materials↗
PubMed2006

Syntheses of soluble, pi-stacking tetracene derivatives.

[reaction: see text] The syntheses of a series of fluorine- and alkyl/alkoxy-functionalized tetracenes are reported. These functional groups are found to improve the solubility in common organic solvents and tune molecular arrangement in solids. The crystal packing, electrochemical behavior, and UV-vis absorbance spectroscopy of these materials are discussed.

Journal Article↗
PubMed2005

perpendicular organization of macromolecules: synthesis and alignment studies of a soluble poly(iptycene).

We describe herein a polymeric material that prefers to align perpendicular to a stretch-aligned polymer host in the solid state. Poly(iptycene) poly-1 was synthesized from monomer 1 under hyperbaric techniques via a Diels-Alder polymerization. Polarized excitation spectra of the anthracene end groups in this material in a stretch-aligned, solution-cast poly(vinyl chloride) (PVC) film showed that the poly(iptycene) prefers to align normal (counter aspect ratio) to the stretching direction of the PVC. This is explained by a "threading" mechanism, whereby the PVC intercalates through the internal free volume presented by poly-1, similar to effects observed in small molecule iptycenes under similar conditions.

Journal Article↗
PubMed2005

Highly emissive conjugated polymer excimers.

Conjugated polymers often display a decrease of fluorescence efficiency upon aggregation due in large part to enhanced interpolymer interactions that produce weakly emissive species generally described as having excimer-like character. We have found that poly(phenylene ethynylene)s with fused pendant [2.2.2] ring structures having alkene bridges substituted with two ester groups function to give highly emissive, broad, and red-shifted emission spectra in the solid state. To best understand the origin of this new solid-state emissive species, we have performed photophysical studies of a series of different materials in solution, spin-coated thin films, solid solutions, and Langmuir films. We conclude that the new, red-shifted, emissive species originate from excimers produced by interchain interactions being mediated by the particular [2.2.2] ring system employed. The ability to design structures that can reliably produce highly emissive conjugated polymer excimers offers new opportunities in the emission tailoring of electroluminescence and sensory devices.

Journal Article↗
PubMed2005

Conjugated polymers containing large soluble diethynyl iptycenes.

[structures: see text] An efficient synthesis of large iptycenes appended with alkoxy and ethynyl substituents is reported. The rigid shape-persistent iptycene scaffold prevents interactions between the polymer backbones and can be used to solubilize polymers containing less soluble but readily accessible comonomers to prepare functional, solution-processible poly(p-phenyleneethynylene) (PPE)-conjugated polymers. These polymers are highly emissive in thin films without significant excimer/exciplex formation as a result of the effective chain isolation enforced by the iptycene units.

Ethylenes↗
PubMed2005

High ionization potential conjugated polymers.

We report the synthesis of a series of poly(p-phenylene ethynylene)s (PPEs) with high ionization potentials and associated high excited-state electron affinities. Their photophysical properties were investigated using steady-state and time-resolved fluorescence techniques. The ionization potentials of the polymer thin films were determined using ultraviolet photoelectron spectroscopy (UPS), and those with the highest ionization potentials displayed high sensitivity for the detection of electron-donating aromatic compounds. The effects of sterics, chemical structure, and electronic properties on the polymers' sensory responses were investigated by fluorescence quenching experiments in both solution and solid thin films. In addition, we report that in some cases the excited-state charge-transfer complexes (exciplexes) of the PPEs with analytes were observed. These latter effects provide promising opportunities for the formation of sensitive and selective chemical sensors.

Journal Article↗
PubMed2005

Detection of myelination using a novel histological probe.

Current methods for myelin staining in tissue sections include both histological and immunohistochemical techniques. Fluorescence immunohistochemistry, which uses antibodies against myelin components such as myelin basic protein, is often used because of the convenience for multiple labeling. To facilitate studies on myelin, this paper describes a quick and easy method for direct myelin staining in rodent and human tissues using novel near-infrared myelin (NIM) dyes that are comparable to other well-characterized histochemical reagents. The near-infrared fluorescence spectra of these probes allow fluorescent staining of tissue sections in multiple channels using visible light fluorophores commonly used in immunocytochemistry. These dyes have been used successfully to detect normal myelin structure and myelin loss in a mouse model of demyelination disease.

Animals↗
PubMed2005

Conjugation enhancement of intramolecular exciton migration in poly(p-phenylene ethynylene)s.

Efficient energy migration in conjugated polymers is critical to their performance in photovoltaic, display, and sensor devices. The ability to precisely control the polymer conformation is a key issue for the experimental investigations and deeper understanding of the nature of this process. We make use of specially designed iptycene-containing poly(p-phenylene ethynylene)s that display chain-extended conformations when dissolved in nematic liquid crystalline solvents. In these solutions, the polymers show a substantial enhancement in the intrachain exciton migration rate, which is attributed to their increased conjugation length and better alignment. The organizational enhancement of the energy transfer efficiency, as determined by site-selective emission from lower energy traps at the polymer termini, is accompanied by a significant increase of the fluorescence quantum yield. The liquid crystalline phase is a necessary requirement for these phenomena to occur, and when the temperature was increased above the nematic-isotropic transition, we observed a dramatic reduction of the energy transfer efficiency and fluorescence quantum yield. The ability to improve the exciton migration efficiency through precise control of the polymer structure with liquid crystalline solutions demonstrates the importance of a polymer's conformation for energy transfer, and provides a way to improve the energy transporting performance of conjugated polymers.

Journal Article↗