Antibody inhibitors of nonmuscle myosin function and assembly.
Explore the source record for details and available documents.
Animals↗
Biomedical subjects
T D Pollard
Publications and source records attributed to T D Pollard.
Arrangement of actin filaments and myosin-like filaments in the contractile ring and of actin-like filaments in the mitotic spindle of dividing HeLa cells.
We used a glutaraldehyde-tannic acid-saponin fixative to improve the preservation of actin filaments in dividing HeLa cells during preparation for thin sectioning. The contractile ring in the cleavage furrow is composed of a parallel array of actin filaments that circle the equator. We show that many of these actin filaments are arranged in small bundles. These bundles consist of about 25 filaments throughout cytokinesis. For comparison, filopodia on these cells have about 23 actin filaments packed at a higher density than the filaments in the contractile ring bundles. Some of the contractile ring actin filaments appear to radiate out from electron-dense sites on the plasma membrane. The contractile ring also has a large number of short filaments 13 nm in diameter that closely resemble filaments formed from purified human cytoplasmic myosin. These thick filaments are aligned circumferentially and interdigitate with the actin filaments, as expected for a sliding filament mechanism of tension generation. There are no long actin filaments in the mitotic spindle, but there are a large number (400 to 1000 per micron 3) of very short filaments identical in appearance to actin filaments in other parts of these cells. These short filaments may account for the reported staining of the mitotic spindle with fluorescent antibodies to actin and with fluorescent myosin fragments.
Actin Cytoskeleton↗
Purification and characterization of two isoforms of Acanthamoeba profilin.
Acanthamoeba profilin purified according to E. Reichstein and E.D. Korn (1979, J. Biol. Chem. 254:6174-6179) consists of two isoforms (profilin-I and-II) with approximately the same molecular weight and reactivity to a monoclonal antibody but different isoelectric points and different mobilities on carboxymethyl-agarose chromatography and reversed-phase high-performance liquid chromatography. The isoelectric points of profilin-I is approximately 5.5 and that of profilin-II is greater than or equal to 9.0. Tryptic peptides from the two proteins are substantially different, which suggests that there are major differences in their sequences. At similar concentrations, both profilins prolong the lag phase at the outset of spontaneous polymerization and inhibit the extent of polymerization. Both forms also inhibit elongation weakly at the barbed end and strongly at the pointed end of actin filaments.
Actins↗
Characterization of monoclonal antibodies to Acanthamoeba myosin-I that cross-react with both myosin-II and low molecular mass nuclear proteins.
We characterized nine monoclonal antibodies that bind to the heavy chain of Acanthamoeba myosin-IA. Eight of these antibodies bind to myosin-IB and eight cross-react with Acanthamoeba myosin-II. All but one of the antibodies bind to a 30-kD chymotryptic peptide of myosin-IA that derives from the COOH terminus of the molecule, and to tryptic peptides as small as 17 kD, hence these epitopes are clustered closely together on the heavy chain. None of the antibodies prevent heavy chain phosphorylation by myosin-I heavy chain kinase. One antibody inhibits the K+-EDTA ATPase activity and three antibodies inhibit the actin-activated Mg++-ATPase activity of myosin-I under the set of conditions that we tested. When fluorescent antibody staining of both whole cells and isolated nuclei is done, several of these monoclonal antibodies react strongly with nuclei. These antibodies also stain the cytoplasmic matrix, especially the cortex near the plasma membrane. All nine of the monoclonal antibodies bind to polypeptides of 30-34 kD that are highly enriched in nuclei isolated from Acanthamoeba. There is no myosin-I in the isolated nuclei, so the 30-34-kD polypeptides, not myosin-I, are responsible for the nuclear staining.
Amoeba↗
Rate constants for the reactions of ATP- and ADP-actin with the ends of actin filaments.
I measured the rate of elongation at the barbed and pointed ends of actin filaments by electron microscopy with Limulus sperm acrosomal processes as nuclei. With improvements in the mechanics of the assay, it was possible to measure growth rates from 0.05 to 280 s-1. At 22 degrees C in 1 mM MgCl2, 10 mM imidazole (pH 7), 0.2 mM ATP with 1 mM EGTA or 50 microM CaCl2 or with EGTA and 50 mM KCl, the elongation rates at both ends have a linear dependence on the ATP-actin concentration from the critical concentration to 20 microM. Consequently, over a wide range of subunit addition rates, the rate constants for association and dissociation of ATP-actin are constant. This shows that the nucleotide composition at or near the end of the growing filament is either the same over this range of growth rates or has no detectable effect on the rate constants. Under conditions where polymerization is fastest (MgCl2 + KCl + EGTA) the rate constants have these values: (table; see text) Compared with ATP-actin, ADP-actin associates slower at both ends, dissociates faster from the barbed end, but dissociates slower from the pointed end. Taking into account the events at both ends, these constants and a simple Oosawa-type model account for the complex three-phase dependence of the rate of polymerization in bulk samples on the concentration of ATP-actin monomers observed by Carlier, M.-F., D. Pantaloni, and E. D. Korn (1985, J. Biol. Chem., 260:6565-6571). These constants can also be used to predict the reactions at steady state in ATP. There will be slow subunit flux from the barbed end to the pointed end. There will also be minor fluctuations in length at the barbed end due to occasional rapid dissociation of strings of ADP subunits but the pointed end will be relatively stable.
Acrosome↗
Interaction of actin filaments with microtubules is mediated by microtubule-associated proteins and regulated by phosphorylation.
We have reconstituted high viscosity networks of actin filaments and microtubules from purified actin, tubulin, and MAPs. MAP-2 can effectively cross-link actin filaments and microtubules, presumably because a low affinity actin binding site is available even when it is bound tightly to microtubules. Phosphorylation of MAP-2 inhibits cross-linking of actin filaments and microtubules. Tau is not an effective cross-linker of actin and microtubules even though it can interact with each polymer individually.
Actin Cytoskeleton↗
Actin and actin-binding proteins. A critical evaluation of mechanisms and functions.
Explore the source record for details and available documents.
Actins↗
Mechanical properties of actin.
We used a cone and plate rheometer to evaluate the mechanical properties of actin over a wide range of oscillation frequencies and shear rates. Remarkably, both filamentous and nonfilamentous actin behaved as viscoelastic solids in both oscillatory and shear type experiments, providing that they were given ample time to equilibrate. Actin was purified by gel filtration from rabbit skeletal muscle and Acanthamoeba. Nonfilamentous actin in 2 different buffers had similar properties. In a low ionic strength buffer the absence of filaments was confirmed by electron microscopy, ultracentrifugation, and the fluorescence of pyrene-labeled actin. In 0.6 M KI, actin was monomeric by gel filtration. Filamentous actin had similar properties in 2 mM MgCl2 with either 50 mM KC1 or 500 mM KC1. Under all 4 of these conditions, actin required about 1000 min at 25 degrees C for the rheological properties to equilibrate. Under conditions where the oscillation of the rheometer did not affect the mechanical properties, all of the actin preparations had dynamic viscosities that were inverse functions of the frequency and dynamic elasticites that leveled off at low frequencies as expected for viscoelastic solids. For filamentous actin, the values of these parameters were about 2 times higher than for nonfilamentous actin. In shear experiments, both filamentous and nonfilamentous actin exhibited shear rate-dependent yield stresses. When filamentous and nonfilamentous actin structures were disrupted by transient shearing, the dynamic elasticity recovered to 90% in 30 min. Ovalbumin in the low ionic strength buffer also behaved as a viscoelastic material with elasticity and viscosity about 10 times lower than nonfilamentous actin, while cytochrome c behaved as a Newtonian fluid with a viscosity of 0.02 poise.
Actins↗
Effect of capping protein on the kinetics of actin polymerization.
Acanthamoeba capping protein increased the rate of actin polymerization from monomers with and without calcium. In the absence of calcium, capping protein also increased the critical concentration for polymerization. Various models were evaluated for their ability to predict the effect of capping protein on kinetic curves for actin polymerization under conditions where the critical concentration was not changed. Several models, which might explain the increased rate of polymerization from monomers, were tested. Two models which predicted the experimental data poorly were (1) capping protein was similar to an actin filament, bypassing nucleation, and (2) capping protein fragmented filaments. Three models in which capping protein accelerated, but did not bypass, nucleation predicted the data well. In the best one, capping protein resembled a nondissociable actin dimer. Several lines of evidence have supported the idea that capping protein blocks the barbed end of actin filaments, preventing the addition and loss of monomers [Cooper, J. A., Blum, J. D., & Pollard, T. D. (1984) J. Cell Biol. 99, 217-225; Isenberg, G. A., Aebi, U., & Pollard, T. D. (1980) Nature (London) 288, 455-459]. This mechanism was also supported here by the effect of capping protein on the kinetics of actin polymerization which was nucleated by preformed actin filaments. Low capping protein concentrations slowed nucleated polymerization, presumably because capping protein blocked elongation at barbed ends of filaments. High capping protein concentrations accelerated nucleated polymerization because of capping protein's ability to interact with monomers and accelerate nucleation.
Actin Depolymerizing Factors↗
Myosin from human erythrocytes.
We have purified myosin from human erythrocytes using methods similar to that for other cytoplasmic myosins with a yield of about 500 micrograms/100 ml of packed cells. It consists of a 200-kDa heavy chain and light chains of 26- and 19.5 kDa and therefore differs from the isozyme in platelets which has light chains of 20- and 15 kDa. At low ionic strength, the myosin forms short bipolar filaments like those of platelet myosin. Eight of eight monoclonal antibodies to platelet myosin also bind to erythrocyte myosin. Like most myosins, it has a high ATPase activity in the presence of Ca2+ or EDTA, but is inhibited by Mg2+. Myosin light-chain kinase transfers 1 phosphate from ATP to the 20-kDa light chain, and this stimulates the actin-activated ATPase. Thus, myosin may play a role in shape changes in the erythrocytes.
Adenosine Triphosphatases↗
Quantitative analysis of the effect of Acanthamoeba profilin on actin filament nucleation and elongation.
The current view of the mechanism of action of Acanthamoeba profilin is that it binds to actin monomers, forming a complex that cannot polymerize [Tobacman, L. S., & Korn, E. D. (1982) J. Biol. Chem. 257, 4166-4170; Tseng, P., & Pollard, T. D. (1982) J. Cell Biol. 94, 213-218; Tobacman, L. S., Brenner, S. L., & Korn, E. D. (1983) J. Biol. Chem. 258, 8806-8812]. This simple model fails to predict two new experimental observations made with Acanthamoeba actin in 50 mM KC1, 1 mM MgCl2, and 1 mM EGTA. First, Acanthamoeba profilin inhibits elongation of actin filaments far more at the pointed end than at the barbed end. According, to the simple model, the Kd for the profilin-actin complex is less than 5 microM on the basis of observations at the pointed end and greater than 50 microM for the barbed end. Second, profilin inhibits nucleation more strongly than elongation. According to the simple model, the Kd for the profilin-actin complex is 60-140 microM on the basis of two assays of elongation but 2-10 microM on the basis of polymerization kinetics that reflect nucleation. These new findings can be explained by a new and more complex model for the mechanism of action that is related to a proposal of Tilney and co-workers [Tilney, L. G., Bonder, E. M., Coluccio, L. M., & Mooseker, M. S. (1983) J. Cell Biol. 97, 113-124]. In this model, profilin can bind both to actin monomers with a Kd of about 5 microM and to the barbed end of actin filaments with a Kd of about 50-100 microM. An actin monomer bound to profilin cannot participate in nucleation or add to the pointed end of an actin filament. It can add to the barbed end of a filament. When profilin is bound to the barbed end of a filament, actin monomers cannot bind to that end, but the terminal actin protomer can dissociate at the usual rate. This model includes two different Kd's--one for profilin bound to actin monomers and one for profilin bound to an actin molecule at the barbed end of a filament. The affinity for the end of the filament is lower by a factor of 10 than the affinity for the monomer, presumably due to the difference in the conformation of the two forms of actin or to steric constraints at the end of the filament.
Actins↗
The rate constant for ATP hydrolysis by polymerized actin.
Polymerized actin hydrolyzes bound ATP in a reaction that depends on the concentration of polymerized ATP-actin, not on the rate of incorporation of ATP-actin into the polymer. The apparent first order rate constant is about 0.07 s-1 at 21 degrees C in 50 mM KCl with 1 mM MgCl2 or CaCl2.
Actins↗
Physical, immunochemical, and functional properties of Acanthamoeba profilin.
Acanthamoebe profilin has a native molecular weight of 11,700 as measured by sedimentation equilibrium ultracentrifugation and an extinction coefficient at 280 nm of 1.4 X 10(4) M-1cm-1. Rabbit antibodies against Acanthamoeba profilin react only with the 11,700 Mr polypeptide among all other ameba polypeptides separated by electrophoresis. These antibodies react with a 11,700 Mr polypeptide in Physarum but not with any proteins of Dictyostelium or Naeglaria. Antibody-binding assays indicate that approximately 2% of the ameba protein is profilin and that the concentration of profilin is approximately 100 mumol/liter cells. During ion exchange chromatography of soluble extracts of Acanthamoeba on DEAE-cellulose, the immunoreactive profilin splits into two fractions: an unbound fraction previously identified by Reichstein and Korn (1979, J. Biol. Chem., 254:6174-6179) and a tightly bound fraction. Purified profilin from the two fractions is identical by all criteria tested. The tightly bound fraction is likely to be attached indirectly to the DEAE, perhaps by association with actin. By fluorescent antibody staining, profilin is distributed uniformly throughout the cytoplasmic matrix of Acanthamoeba. In 50 mM KCl, high concentrations of Acanthamoeba profilin inhibit the elongation rate of muscle actin filaments measured directly by electron microscopy, but the effect is minimal in KCl with 2 MgCl2. By using the fluorescence change of pyrene-labeled Acanthamoeba actin to assay for polymerization, we confirmed our earlier observation (Tseng, P. C.-H., and T. D. Pollard, 1982, J. Cell Biol. 94:213-218) that Acanthamoeba profilin inhibits nucleation much more strongly than elongation under physiological conditions.
Actins↗
Acanthamoeba castellanii capping protein: properties, mechanism of action, immunologic cross-reactivity, and localization.
We report further characterization of the physical and immunologic properties, mechanism of action, and intracellular localization of Acanthamoeba castellanii capping protein, an actin regulatory protein discovered by Isenberg (Isenberg, G., U. Aebi, and T. D. Pollard, 1980, Nature (Lond.) 288:455-459). The native molecular weight calculated from measurements of Stokes' radius (3.8 nm by gel filtration chromatography) and sedimentation coefficient (4.8 S by sucrose gradient velocity sedimentation) was 74,000 daltons. The subunit molecular weights were 31,000 and 28,000 daltons, so the native molecule is a heterodimer. The two subunits did not immunologically cross-react with each other or with any other proteins from Acanthamoeba or several other organisms. In studies of the mechanism of action, Isenberg (see above reference) found that capping protein blocked polymerization from the barbed end of actin filaments and sedimented with actin filaments. We confirmed that capping protein binds to actin filaments with a gel filtration assay. Capping protein decreased the length distribution and high shear viscosity of actin filaments. Capping protein did not bundle or cross-link actin filaments. Low concentrations of capping protein increased the critical concentration for muscle and ameba actin polymerization from 0.1 to 0.6 microM in Mg++ and EGTA. Increasing amounts of capping protein did not increase the critical concentration further. In Ca++ capping protein did not change the critical concentration for muscle actin, but did increase the critical concentration for ameba actin. Ca++ had no effect on the ability of capping protein to decrease the low or high shear viscosity of actin filaments. By indirect fluorescent antibody staining, capping protein was localized to the cell cortex, an area rich in actin filaments. During subcellular fractionation of homogenates, about 1/3 of cellular capping protein banded with a crude membrane fraction. The other 2/3 of cellular capping protein was soluble, with a Stokes' radius equal to that of the purified protein. The molar ratio of capping protein to actin in the cell was 1:150.
Actin Depolymerizing Factors↗
Interaction of actin filaments with microtubules.
Explore the source record for details and available documents.
Actins↗
Monoclonal antibodies demonstrate limited structural homology between myosin isozymes from Acanthamoeba.
We used a library of 31 monoclonal and six polyclonal antibodies to compare the structures of the two classes of cytoplasmic myosin isozymes isolated from Acanthamoeba: myosin-I, a 150,000-mol-wt, globular molecule; and myosin-II, a 400,000-mol-wt molecule with two heads and a 90-nm tail. This analysis confirms that myosin-I and -II are unique gene products and provides the first evidence that these isozymes have at least one structurally homologous region functionally important for myosin's role in contractility. Characterization of the 23 myosin-II monoclonal antibody binding sites by antibody staining of one-dimensional peptide maps and solid phase, competitive binding assays demonstrate that they bind to at least 15 unique sites on the myosin-II heavy chain. The antibodies can be grouped into six families, whose members bind close to one another. None of the monoclonal antibodies bind to myosin-II light chains and polyclonal antibodies against myosin-II light or heavy chain bind only to myosin-II light or heavy chains, respectively: no antibody binds both heavy and light chains. Six of eight monoclonal antibodies and one of two polyclonal sera that react with the myosin-I heavy chain also bind to determinants on the myosin-II heavy chain. The cross-reactive monoclonal antibodies bind to the region of myosin-II recognized by the largest family of myosin-II monoclonal antibodies. In the two papers that immediately follow, we show that this family of monoclonal antibodies to myosin-II binds to the myosin-II tail near the junction with the heads and inhibits both the actin-activated ATPase of myosin-II and contraction of gelled cytoplasmic extracts of Acanthamoeba cytoplasm. Further, this structurally homologous region may play a key role in energy transduction by cytoplasmic myosins.
Amoeba↗
Direct localization of monoclonal antibody-binding sites on Acanthamoeba myosin-II and inhibition of filament formation by antibodies that bind to specific sites on the myosin-II tail.
Electron microscopy of myosin-II molecules and filaments reacted with monoclonal antibodies demonstrates directly where the antibodies bind and shows that certain antibodies can inhibit the polymerization of myosin-II into filaments. The binding sites of seven of 23 different monoclonal antibodies were localized by platinum shadowing of myosin monomer-antibody complexes. The antibodies bind to a variety of sites on the myosin-II molecule, including the heads, the proximal end of the tail near the junction of the heads and tail, and the tip of the tail. The binding sites of eight of the 23 antibodies were also localized on myosin filaments by negative staining. Antibodies that bind to either the myosin heads or to the proximal end of the tail decorate the ends of the bipolar filaments. Some of the antibodies that bind to the tip of the myosin-II tail decorate the bare zone of the myosin-II thin filament with 14-nm periodicity. By combining the data from these electron microscope studies and the peptide mapping and competitive binding studies we have established the binding sites of 16 of 23 monoclonal antibodies. Two of the 23 antibodies block the formation of myosin-II filaments and given sufficient time, disassemble preformed myosin-II filaments. Both antibodies bind near one another at the tip of the myosin-II tail and are those that decorate the bare zone of preformed bipolar filaments with 14-nm periodicity. None of the other antibodies affect myosin filament formation, including one that binds to another site near the tip of the myosin-II tail. This demonstrates that antibodies can inhibit polymerization of myosin-II, but only when they bind to key sites on the tail of the molecule.
Adenosine Triphosphate↗
Inhibition of acanthamoeba actomyosin-II ATPase activity and mechanochemical function by specific monoclonal antibodies.
Monoclonal and polyclonal antibodies that bind to myosin-II were tested for their ability to inhibit myosin ATPase activity, actomyosin ATPase activity, and contraction of cytoplasmic extracts. Numerous antibodies specifically inhibit the actin activated Mg++-ATPase activity of myosin-II in a dose-dependent fashion, but none blocked the ATPase activity of myosin alone. Control antibodies that do not bind to myosin-II and several specific antibodies that do bind have no effect on the actomyosin-II ATPase activity. In most cases, the saturation of a single antigenic site on the myosin-II heavy chain is sufficient for maximal inhibition of function. Numerous monoclonal antibodies also block the contraction of gelled extracts of Acanthamoeba cytoplasm. No polyclonal antibodies tested inhibited ATPase activity or gel contraction. As expected, most antibodies that block actin-activated ATPase activity also block gel contraction. Exceptions were three antibodies M2.2, -15, and -17, that appear to uncouple the ATPase activity from gel contraction: they block gel contraction without influencing ATPase activity. The mechanisms of inhibition of myosin function depends on the location of the antibody-binding sites. Those inhibitory antibodies that bind to the myosin-II heads presumably block actin binding or essential conformational changes in the myosin heads. A subset of the antibodies that bind to the proximal end of the myosin-II tail inhibit actomyosin-II ATPase activity and gel contraction. Although this part of the molecule is presumably some distance from the ATP and actin-binding sites, these antibody effects suggest that structural domains in this region are directly involved with or coupled to catalysis and energy transduction. A subset of the antibodies that bind to the tip of the myosin-II tail appear to inhibit ATPase activity and contraction through their inhibition of filament formation. They provide strong evidence for a substantial enhancement of the ATPase activity of myosin molecules in filamentous form and suggest that the myosin filaments may be required for cell motility.
Adenosine Triphosphatases↗