Biomedical subjects

T D Pollard

Publications and source records attributed to T D Pollard.

At least 181 records · Page 10Linked to original sources

PubMed1984

Polymerization of ADP-actin.

Using hexokinase, glucose, and ATP to vary reversibly the concentrations of ADP and ATP in solution and bound to Acanthamoeba actin, I measured the relative critical concentrations and elongation rate constants for ATP-actin and ADP-actin in 50 mM KCl, 1 mM MgCl2, 1 mM EGTA, 0.1 mM nucleotide, 0.1 mM CaCl2, 10 mM imidazole, pH 7. By both steady-state and elongation rate methods, the critical concentrations are 0.1 microM for ATP-actin and 5 microM for ADP-actin. Consequently, a 5 microM solution of actin can be polymerized, depolymerized, and repolymerized by simply cycling from ATP to ADP and back to ATP. The critical concentrations differ, because the association rate constant is 10 times higher and the dissociation rate constant is five times lower for ATP-actin than ADP-actin. These results show that ATP-actin occupies both ends of actin filaments growing in ATP. The bound ATP must be split on internal subunits and the number of terminal subunits with bound ATP probably depends on the rate of growth.

Actins↗

PubMed1984

Purification of a high molecular weight actin filament gelation protein from Acanthamoeba that shares antigenic determinants with vertebrate spectrins.

I have purified a high molecular weight actin filament gelation protein (GP-260) from Acanthamoeba castellanii, and found by immunological cross-reactivity that it is related to vertebrate spectrins, but not to two other high molecular weight actin-binding proteins, filamin or the microtubule-associated protein, MAP-2. GP-260 was purified by chromatography on DEAE-cellulose, selective precipitation with actin and myosin-II, chromatography on hydroxylapatite in 0.6 M Kl, and selective precipitation at low ionic strength. The yield was 1-2 micrograms/g cells. GP-260 had the same electrophoretic mobility in SDS as the 260,000-mol-wt alpha-chain of spectrin from pig erythrocytes and brain. Electron micrographs of GP-260 shadowed on mica showed slender rod-shaped particles 80-110 nm long. GP-260 raised the low shear apparent viscosity of solutions of Acanthamoeba actin filaments and, at 100 micrograms/ml, formed a gel with a 8 microM actin. Purified antibodies to GP-260 reacted with both 260,000- and 240,000-mol-wt polypeptides in samples of whole ameba proteins separated by gel electrophoresis in SDS, but only the 260,000-mol-wt polypeptide was extracted from the cell with 0.34 M sucrose and purified in this study. These antibodies to GP-260 also reacted with purified spectrin from pig brain and erythrocytes, and antibodies to human erythrocyte spectrin bound to GP-260 and the 240,000-mol-wt polypeptide present in the whole ameba. The antibodies to GP-260 did not bind to chicken gizzard filamin or pig brain MAP-2, but they did react with high molecular weight polypeptides from man, a marsupial, a fish, a clam, a myxomycete, and two other amebas. Fluorescent antibody staining with purified antibodies to GP-260 showed that it is concentrated near the plasma membrane in the ameba.

Amoeba↗

PubMed1984

Molecular architecture of the cytoplasmic matrix.

Explore the source record for details and available documents.

Actins↗

PubMed1983

Measurement of rate constants for actin filament elongation in solution.

This paper describes a simple method to measure the rate constants for actin filament elongation using pyrene-actin fluorescence as a measure of the polymer concentration and unlabeled actin filaments as nuclei. With careful selection of conditions, the initial rate of polymerization is directly proportional to the actin monomer concentration above the critical concentration. Plots of initial rate versus actin concentration give the critical concentration (x intercept), the association rate constant, k+ (slope), and the dissociation rate constant, k-(y intercept). By calibrating the system under conditions where the absolute values of these rate constants are known from previous electron microscopic experiments [T. D. Pollard and M. S. Mooseker (1981) J. Cell Biol. 88, 654-659; J. A. Cooper, S. B. Walker, and T. D. Pollard (1983) J. Muscle Res. Cell Motil. 4, 253-262], one can calculate the absolute values of the rate constants under other conditions as well as the length of the filaments used as a nuclei. This approach has proven useful for evaluating the effect of actin-binding proteins on the polymerization process.

Actins↗

PubMed1983

Structure of the actin molecule determined from electron micrographs of crystalline actin sheets with a tentative alignment of the molecule in the actin filament.

Electron microscopy and image processing of negatively stained crystalline sheets induced from Acanthamoeba actin have been used to yield a three-dimensional reconstruction of the actin molecule, including data to a maximum resolution of 15 A. This model shows actin to be an asymmetric, wedge-shaped molecule. A three-dimensional reconstruction of an averaged, polar actin filament from negatively stained polylysine-induced actin filament paracrystals has also been computed. We show two possible ways in which the wedge-shaped actin molecule from the sheets can be placed into such a filament reconstruction. In both, the major intermolecular contacts are formed on complementary surfaces of the actin subunit and follow the left-handed genetic helix of the filament, a feature also found in the filament reconstruction.

Actins↗

PubMed1983

Phosphorylation of microtubule-associated proteins regulates their interaction with actin filaments.

We have determined the absolute phosphate content of microtubule-associated proteins (MAPs) and established that phosphorylation inhibits the actin filament cross-linking activity of MAPs and both of the major MAP components, MAP-2 and tau. Similar results were obtained with actin from rabbit muscle, hog brain, and Acanthamoeba castellanii. We used the endogenous phosphatases and kinases in hog brain microtubule protein to modulate MAP phosphate level before isolating heat-stable MAPs. MAPs isolated directly from twice-cycled microtubule protein contain 7.1 +/- 0.1 (S.E.) mol of phosphate/300,000 g protein. After incubating microtubule protein without ATP, MAPs, had 4.9 +/- 0.6 phosphates. After incubating microtubule protein with 1 mM ATP and 5 microM cAMP in 2 mM EGTA, MAPs had 8.6 +/- 0.5 phosphates but there was also exchange of three more [32P]phosphates from gamma-labeled ATP for preexisting MAP phosphate. Incubation of microtubule protein with ATP and cAMP in 5 mM CaCl2 resulted in exchange but no net addition of phosphate to MAPs. We fractionated the MAP preparations by gel filtration and obtained MAP-2 with 4.3 to 7.5 and tau with 1.5 to 2.2 mol of phosphate/mol of protein depending on how we treated the microtubule protein prior to MAP isolation. The actin filament cross-linking activity of whole MAPs, MAP-2, and tau depended on the MAP-phosphate content. In all cases, phosphorylation of MAPs inhibited actin filament cross-linking activity. The concentration of high phosphate MAPs required to form a high viscosity solution with actin filaments was 2 to 4 times more than that of low phosphate. MAPs. During incubation of microtubule protein with [gamma-32P]ATP, only MAP peptides are labeled. Treatment of these MAPs with either acid or alkaline phosphatase removes phosphate mainly from MAP-2, with an increase in actin filament cross-linking activity. Thus, both MAP phosphorylation and the effect of phosphorylation on actin cross-linking activity of MAPs are reversible.

Actins↗

PubMed1983

Kinetic evidence for a monomer activation step in actin polymerization.

We measured the time course of skeletal muscle actin polymerization at different actin concentrations. In 0.1 M KCl with 1 mM Mg2+, log/log plots of the rate of the early, slow phase of polymerization vs. actin concentration were linear with slopes from 1.0 to 1.3. Computer-assisted calculations of similar curves from theoretical models with different sizes for the nucleus showed that no simple model gave a log/log plot with a slope less than 1.5. Addition of a first-order, monomer activation step before nucleation allowed models of any reasonable nucleus size to have a slope of 1. This is the first evidence that such a step is part of the kinetic pathway for actin polymerization. In 0.1 M KCl with 0.2 mM Ca2+, log/log plots of the rate of the slow phase vs. actin concentration were linear with slopes from 2.0 to 2.5. Monomer activation was not necessary to account for this slope. However, fits of kinetic curves calculated from theoretical models to experimental kinetic curves showed that filament fragmentation was important to achieve a good fit, confirming the finding of Wegner and Savko [Wegner, A., & Savko, P. (1982) Biochemistry 21, 1909-1913]. Our fit procedure also allowed us to estimate the size of the nucleus and the rate constants for activation, nucleation, and fragmentation. In 0.1 M KCl with 1 mM Mg2+, the nucleus was a dimer or trimer, and nucleation was fast. In 0.1 M KCl with 2.0 mM Ca2+, the nucleus was a trimer, and nucleation was slow.

Actins↗

PubMed1983

Actin filament stress fibers in vascular endothelial cells in vivo.

Fluorescence microscopy with 7-nitrobenz-2-oxa-3-diazole phallacidin was used to survey vertebrate tissues for actin filament bundles comparable to the stress fibers of cultured cells. Such bundles were found only in vascular endothelial cells. Like the stress fibers of cultured cells, these actin filament bundles were stained in a punctate pattern by fluorescent antibodies to both alpha-actinin and myosin. The stress fibers were oriented parallel to the direction of blood flow and were prominent in endothelial cells from regions exposed to high-velocity flow, such as the left ventricle, aortic valve, and aorta. Actin bundles may help the endothelial cell to withstand hemodynamic stress.

Actins↗

PubMed1983

Pyrene actin: documentation of the validity of a sensitive assay for actin polymerization.

The fluorescence of pyrene-labelled actin is much higher after polymerization. We have characterized in detail the polymerization properties of pyrene actin and report that native and pyrene actin are identical using the following criteria: (1) the time course of polymerization; (2) the elongation rate constants; (3) the intrinsic viscosity; and (4) the critical concentration. Native and pyrene actin copolymerize. Fluorescence of polymerized pyrene actin is 7-10 times higher than monomer. The fluorescent signal is proportional to polymer weight concentration and is insensitive to filament length distribution. Bleaching can be minimized by appropriate filters to allow continuous monitoring of signal. Measurements do not influence polymerization kinetics. This establishes that pyrene actin fluorescence is a valid assay for actin polymerization that is more sensitive than any other current assay.

Actins↗

PubMed1983

Improved preservation and staining of HeLa cell actin filaments, clathrin-coated membranes, and other cytoplasmic structures by tannic acid-glutaraldehyde-saponin fixation.

Fixation of HeLa cells with a mixture of 100 mM glutaraldehyde, 2 mg/ml tannic acid and 0.5 mg/ml saponin allows the tannic acid to penetrate intact cells without disruption of membranes or extraction of the cytoplasmic matrix. After subsequent treatment with OsO4 cytoplasmic structures are stained so densely that fine details are visible even in very thin (dark gray) sections. Actin filaments are protected from disruption by OsO4 so that straight, densely stained filaments are seen in the cell cortex, filopodia, ruffling membranes, and stress fibers. Stress fibers also have 15-18-nm densities similar in appearance to myosin filaments. Tannic acid staining reveals that the coats of coated vesicles, pits, and plaques have a 12-nm layer of amorphous material between the membrane and the clathrin basketwork. HeLa cells have very large clathrin-coated membrane plaques on the basal surface. These coated membrane plaques appear to be a previously unrecognized site of cell-substrate adhesion.

Actins↗

PubMed1983

Association of methionyl-tRNA synthetase with detergent-insoluble components of the rough endoplasmic reticulum.

Using fluorescent antibody staining, we have established the association of methionyl-tRNA synthetase with the endoplasmic reticulum in PtK2 cells. After Triton X-100 extraction, 70% of the recovered aminoacyl-tRNA synthetase activity was found in the detergent-insoluble fraction. This fraction of the enzyme remained localized with insoluble endoplasmic reticulum antigens and with ribosomes, which were stained with acridine orange. By both fluorescence microscopy and electron microscopy the organization of the detergent-insoluble residue was found to depend on the composition of the extracting solution. After extraction with a microtubule-stabilizing buffer containing EGTA, Triton X-100, and polyethylene glycol (Osburn, M., and K. Weber, 1977, Cell, 12:561-571) the ribosomes were aggregated in large clusters with remnants of membranes. After extraction with a buffer containing Triton X-100, sucrose, and CaCl2 (Fulton, A. B., K. M. Wang, and S. Penman, 1980, Cell, 20:849-857), the ribosomes were in small clusters and there were few morphologically recognizable membranes. In both cases the methionyl-tRNA synthetase and some endoplasmic reticulum antigens retained approximately their normal distribution in the cell. Double fluorochrome staining showed no morphological association of methionyl-tRNA synthetase with the microtubule, actin, or cytokeratin fiber systems of PtK2 cells. These observations demonstrate that detergent-insoluble cellular components, sometimes referred to as "cytoskeletal" preparations, contain significant amounts of nonfilamentous material including ribosomes, and membrane residue. Caution is required in speculating about intermolecular associations in such a complex cell fraction.

Amino Acyl-tRNA Synthetases↗

PubMed1982

Actin and myosin function in acanthamoeba.

We have studied the functions of contractile proteins in Acanthamoeba by a combination of structural, biochemical and physiological approaches. We used electron microscopy and image processing to determine the three-dimensional structure of actin and the orientation of the molecule in the actin filament. We measured the rate constants for actin filament elongation and re-evaluated the effect of MgCl2 on the filament nucleation process. In Acanthamoeba actin polymerization is regulated, at least in part, by profilin, which binds to actin monomers, and by capping protein, which both nucleates polymerization and blocks monomer addition at the 'barbed' end of the filament. To test for physiological functions of myosin-II, we produced a monoclonal antibody that inhibits the actin-activated ATPase. When microinjected into living cells, this active-site-specific antibody inhibits amoeboid locomotion. We expect that similar experiments can be used to test for the physiological functions of the other components of the Acanthamoeba contractile system.

Actins↗

PubMed1982

The interaction of actin filaments with microtubules and microtubule-associated proteins.

Purified actin and microtubule proteins polymerized together form a gel, while mixtures of actin with tubulin polymers lacking microtubule-associated proteins (MAPs) have low viscosities close to the sum of the viscosities of the constituents. Mixtures of actin and MAPs also have high viscosities. Our interpretation of these observations was that there is interaction of actin filaments and microtubules which is mediated by MAPs (Griffith, L. M., and Pollard, T. D. (1978) J. Cell Biol. 78, 958-965). We report here further evidence for this interaction. 1) Actin filaments and microtubules can form gels at physiological ionic strength providing the anion is glutamate rather than chloride. Both glutamate and chloride inhibit actin-MAPs interaction, but this is compensated for in glutamate where the microtubules are longer than in chloride. 2) The low shear viscosity of mixtures of isolated MAPs and actin filaments is enhanced by acidic pH and inhibited by high ionic strength. 3) MAPs can be fractionated to yield four different fractions with actin cross-linking activity: a subset of high molecular weight MAPs, purified "MAP-2" and two different fractions of tau polypeptides. 4) We have reconstituted a gel from actin, purified tubulin, and whole MAPs, but have not yet been successful with actin, purified tubulin, and any single purified MAP.

Actins↗

PubMed1982

Cross-linking of actin filament networks by self-association and actin-binding macromolecules.

We have used low shear falling ball viscometry to measure the effects of actin purity, solution conditions, and cross-linking macromolecules on the formation of actin filament networks. Removal of minor contaminants from conventional muscle actin (Spudich, J. A., and Watt, S. (1971) J. Biol. Chem. 246, 4866-4871) by gel filtration (MacLean-Fletcher, S. and Pollard, T.D. (1980c) Biochem. Biophys. Res. Commun. 96, 18-27), greatly promotes the interaction of the filaments. Purified actin filaments form a gel (apparent viscosity greater than 12,000 cp) at approximately 2 mg/ml whereas approximately 12 mg/ml of conventional actin filaments have a viscosity of less than 400 cp. The apparent viscosity of the filaments depends on pH and the concentration of monovalent and divalent cations. The viscosity of purified action filaments is more sensitive to such variables when compared to that of conventional actin filaments. Together these experiments suggest that actin filament self-associations contribute to the stabilization of actin gels. A number of basic macromolecules, including aldolase, histones, lysozyme, polylysine, and RNase A can bind to and crosslink conventional actin filaments to form a gel. Since it is unlikely that all of these molecules are bound to actin in vivo, experimental approaches in addition to viscometry and sedimentation must be applied to prove that a given protein functions as an actin cross-linking protein in the cell.

Actins↗

PubMed1982