Biomedical subjects

T Blunk

Publications and source records attributed to T Blunk.

At least 19 recordsLinked to original sources

PubMed2006

Lipidic implants for controlled release of bioactive insulin: effects on cartilage engineered in vitro.

Controlled release systems for growth factors and morphogens are potentially powerful tools for the engineering or the treatment of living tissues. However, due to possible instabilities of the protein during manufacture, storage, and release, in the development of new release systems it is paramount to investigate into the maintenance of bioactivity of the protein. Within this study, recently developed protein releasing lipid matrix cylinders of 2 mm diameter and 2 mm height made from glycerol tripalmitate were manufactured in a compression process without further additives. Insulin in different concentrations (0.2%, 1%, and 2%) served as model protein. The bioactivity of the protein released from the matrices was investigated in a long-term cartilage engineering culture for up to four weeks; additionally, the release profiles were determined using ELISA. Insulin released from the matrices increased the wet weights of the cartilaginous cell-polymer constructs (up to 3.2-fold), the amount of GAG and collagen in the constructs (up to 2.4-fold and 3.2-fold, respectively) and the GAG and collagen content per cell (1.8-fold and 2.5-fold, respectively), compared to the control. The dose-dependent effects on tissue development correlated well with release profiles from the matrices with different insulin loading. In conclusion, the lipid matrices, preserving the bioactivity of incorporated and released protein, are suggested as a suitable carrier system for use in tissue engineering or for the localized treatment of tissues with highly potent protein drugs such as used in the therapy of brain cancer or neurodegenerative CNS diseases.

Animals↗

PubMed2006

Programmable implants--from pulsatile to controlled release.

The aim of this study was to develop programmable implants with a reproducible delayed onset of release followed by several weeks of controlled release. For this purpose, a drug-loaded core was embedded into a drug-free bulk-eroding poly(D,L lactic-co-glycolic acid) or poly(D,L lactic acid) mantle. The manufacturing procedure was established and optimized for three mantle materials, which showed delay times ranging from 7 to 83 days. Triglycerides with fatty acid chain lengths from C12 to C18 were investigated as core materials, producing release periods from 2 to 16 weeks. Concomitantly, applying a convolution/deconvolution model showed the possibility of theoretical prediction of the resulting release profiles.

Arylsulfonates↗

PubMed2006

Biocompatibility and erosion behavior of implants made of triglycerides and blends with cholesterol and phospholipids.

Triglycerides are a promising class of material for the parenteral delivery of drugs and have become the focus of tremendous research efforts in recent years. The aim of this study was to investigate the biocompatibility of glyceroltripalmitate as well as the influence of cholesterol and distearoyl-phosphatidyl-choline (DSPC) on the erosion behavior of the lipid. For these investigations, two in vivo studies were carried out, in which cylindrical matrices of 2 mm diameter were manufactured and subcutaneously implanted in immunocompetent NMRI-mice. After excision of the implants, tissue reactions of the animals as well as changes in the weight, shape and microstructure of the implants were investigated. The triglyceride and cholesterol showed good biocompatibility, as indicated by their minimal encapsulation in connective tissue and the absence of inflammatory reactions. Increasing the levels of phospholipid in the implants, however, led to an increased inflammatory reaction. In contrast to cholesterol, which did not affect erosion, the incorporation of DSPC into the triglyceride matrices led to clearly visible signs of degradation.

Animals↗

PubMed2005

Polyethylenimine-based non-viral gene delivery systems.

Gene therapy has become a promising strategy for the treatment of many inheritable or acquired diseases that are currently considered incurable. Non-viral vectors have attracted great interest, as they are simple to prepare, rather stable, easy to modify and relatively safe, compared to viral vectors. Unfortunately, they also suffer from a lower transfection efficiency, requiring additional effort for their optimization. The cationic polymer polyethylenimine (PEI) has been widely used for non-viral transfection in vitro and in vivo and has an advantage over other polycations in that it combines strong DNA compaction capacity with an intrinsic endosomolytic activity. Here, we give some insight into strategies developed for PEI-based non-viral vectors to overcome intracellular obstacles, including the improvement of methods for polyplex preparation and the incorporation of endosomolytic agents or nuclear localization signals. In recent years, PEI-based non-viral vectors have been locally or systemically delivered, mostly to target gene delivery to tumor tissue, the lung or liver. This requires strategies to efficiently shield transfection polyplexes against non-specific interaction with blood components, extracellular matrix and untargeted cells and the attachment of targeting moieties, which allow for the directed gene delivery to the desired cell or tissue. In this context, materials, facilitating the design of novel PEI-based non-viral vectors are described.

Active Transport, Cell Nucleus↗

PubMed2004

Biomimetic polymers in pharmaceutical and biomedical sciences.

This review describes recent developments in the emerging field of biomimetic polymeric biomaterials, which signal to cells via biologically active entities. The described biological effects are, in contrast to many other known interactions, receptor mediated and therefore very specific for certain cell types. As an introduction into this field, first some biological principles are illustrated such as cell attachment, cytokine signaling and endocytosis, which are some of the mechanisms used to control cells with biomimetic polymers. The next topics are then the basic design rules for the creation of biomimetic materials. Here, the major emphasis is on polymers that are assembled in separate building blocks, meaning that the biologically active entity is attached to the polymer in a separate chemical reaction. In that respect, first individual chemical standard reactions that may be used for this step are briefly reviewed. In the following chapter, the emphasis is on polymer types that have been used for the development of several biomimetic materials. There is, thereby, a delineation made between materials that are processed to devices exceeding cellular dimensions and materials predominantly used for the assembly of nanostructures. Finally, we give a few current examples for applications in which biomimetic polymers have been applied to achieve a better biomaterial performance.

Animals↗

PubMed2003

Bone morphogenetic protein 9: a potent modulator of cartilage development in vitro.

Few publications describe the activity of bone morphogenetic protein-9 (BMP-9), but the consensus of these largely in vivo studies is that while BMP-9 can induce ectopic bone formation at relatively large concentrations, it is primarily active in non-skeletal locations--including the liver, nervous system and marrow. To study the effects of BMP-9 on chondrogenesis in a well-defined environment, calf articular chondrocytes were seeded onto biodegradable PGA scaffolds. The resulting cell-polymer constructs were cultured in either control medium or medium supplemented with 1, 10, 50 or 100 ng/ml of BMP-9. After 4 weeks of in vitro culture, all concentrations of BMP-9 increased the total mass of the constructs, and the amounts of collagen, glycosaminoglycans (GAG) and cells per construct. On a mass percentage basis, BMP-9 tended to increase GAG, to decrease the relative amount of collagen and had little effect on the relative amount of cells. BMP-9 elicited qualitatively similar responses as BMP-2, -12 and -13. However, in contrast to BMP-12 and -13, BMP-9 (at concentrations > or = 10 ng/ml) induced hypertrophic chondrocyte formation and was the only BMP tested to induce mineralization. Taken together, these data suggest that BMP-9 is a potent modulator of cartilage development in vitro.

Alkaline Phosphatase↗

PubMed2003

Poly(D,L-lactic acid)-poly(ethylene glycol)-monomethyl ether diblock copolymers control adhesion and osteoblastic differentiation of marrow stromal cells.

Biodegradable polymers, such as poly(lactic acid) (PLA) and poly(lactic-coglycolic acid) (PLGA), are attractive materials for tissue engineering because of their degradative and mechanical properties, which permit scaffolds to be tailored to the individual requirements of different tissues. Although these materials support tissue development, their chemical properties offer no control of cell adhesion or function because their surfaces become immediately masked by adsorbing serum proteins when the materials come into contact with body fluids. Furthermore, adhesion proteins undergo conformational changes and a decrease in bioactivity when adsorbed to hydrophobic materials, such as PLA. To overcome these limitations, we modified the properties of PLA by synthesizing a diblock copolymer with poly(ethylene glycol) (PEG), which is known to reduce the amount of adsorbed proteins and to modify their conformation. By altering the PEG content of these diblock copolymers we were able to control the adsorption of adhesion proteins and, because cell adhesion takes place only in the presence of serum proteins, to control cell adhesion and cell shape. Marrow stromal cell differentiation to the osteoblastic phenotype was strongly improved on PEG-PLA compared with PLA, PLGA and tissue culture polystyrene and led to a 2-fold increase in alkaline phosphatase activity and mineralization.

Animals↗

PubMed2002

Systemic delivery of human growth hormone using genetically modified tissue-engineered microvascular networks: prolonged delivery and endothelial survival with inclusion of nonendothelial cells.

Endothelial cells have the potential to provide efficient long-term delivery of therapeutic proteins to the circulation if a sufficient number of genetically modified endothelial cells can be incorporated into the host vasculature and if these cells persist for an adequate period of time. Here we describe the ability of nonendothelial cells to modulate the survival of implanted endothelial cells and their incorporation into host vasculature. Bovine aortic endothelial cells (BAECs) suspended in Matrigel and cultured in vitro remained spherical and decreased in number over time. Subcutaneous implantation of gels containing BAECs secreting human growth hormone (hGH) in mice initially resulted in detectable plasma hGH levels, which were undetectable after 2 weeks. When mixed with fibroblasts and suspended in Matrigel, hGH-secreting BAECs formed microvascular networks in vitro. Implantation of these gels resulted in plasma hGH levels that decreased slightly over 2 weeks and then remained stable for at least 6 weeks. BAECs incorporated into blood vessels within both the implant and fibrous capsule that surrounded and invaded implants. Within implants containing BAECs and fibroblasts, viable BAECs were present for at least 6 weeks at a higher density than in implants containing BAECs alone at 3 weeks. These results indicate that implanted BAECs can incorporate into host blood vessels and that inclusion of fibroblasts in this system prolongs BAEC survival and hGH delivery.

Animals↗

PubMed2002

Bone morphogenetic proteins-2, -12, and -13 modulate in vitro development of engineered cartilage.

Bovine calf articular chondrocytes were seeded onto biodegradable polyglycolic acid (PGA) scaffolds and cultured in either control medium or medium supplemented with 1, 10, or 100 ng/mL of bone morphogenetic proteins (BMPs) BMP-2, BMP-12, or BMP-13. Under all conditions investigated, cell-polymer constructs cultivated for 4 weeks in vitro macroscopically and histologically resembled native cartilage. Addition of 100 ng/mL of BMP-2, BMP-12, or BMP-13 increased the total mass of the constructs relative to the controls by 121%, 80%, and 62%, respectively, which was accompanied by increases in the absolute amounts of collagen, glycosaminoglycans (GAG), and cells. The addition of 100 ng/mL of BMP-2, BMP-12, or BMP-13 increased the weight percentage of GAG in the constructs by 27%, 18%, and 15%, and decreased the weight percent of total collagen to 63%, 89%, and 83% of controls, respectively. BMP-2, but not BMP-12 or BMP-13 promoted chondrocyte hypertrophy. Taken together, these data suggest that BMP-2, BMP-12, and BMP-13 increase growth rate and modulate the composition of engineered cartilage and that 100 ng/mL of BMP-2 has the greatest effect. In addition, in vitro engineered cartilage provides a system for studying the effects of BMPs on chondrogenesis in a well-defined environment.

Animals↗

PubMed2001

IGF-I and mechanical environment interact to modulate engineered cartilage development.

Bovine calf articular chondrocytes were seeded onto biodegradable polyglycolic acid scaffolds and cultured for four weeks using in vitro systems providing different mechanical environments (static and mixed Petri dishes, static and mixed flasks, and rotating vessels) and different biochemical environments (medium with and without supplemental insulin-like growth factor I, IGF-I). Under all conditions, the resulting engineered tissue histologically resembled cartilage and contained its major constituents: glycosaminoglycans, collagen, and cells. The mechanical environment and supplemental IGF-I (a) independently modulated tissue morphology, growth, biochemical composition, and mechanical properties (equilibrium modulus) of engineered cartilage as previously reported; (b) interacted additively or in some cases nonadditively producing results not suggested by the independent responses, and (c) in combination produced tissue superior to that obtained by modifying these factors individually.

Animals↗

PubMed2001

Effects of mixing intensity on tissue-engineered cartilage.

Mechanical forces regulate the structure and function of many tissues in vivo; recent results indicate that the mechanical environment can decisively influence the development of engineered tissues cultured in vitro. To investigate the effects of the hydrodynamic environment on tissue-engineered cartilage, primary bovine calf chondrocytes were seeded on fibrous polyglycolic acid meshes and cultured in spinner flasks either statically or at one of nine different turbulent mixing intensities. In medium from unmixed flasks, CO(2) accumulated and O(2) was depleted, whereas in medium from mixed flasks the concentrations of both gases approached their equilibrium values. Relative to constructs exposed to nonmixed conditions, constructs exposed to mixing contained higher fractions of collagen, synthesized and released more GAG, but contained lower fractions of GAG. Across the wide range of mixing intensities investigated, the presence or absence of mixing, but not the intensity of the mixing, was the primary determinant of the GAG and collagen content in the constructs. The all-or-none nature of these responses may provide insight into the mechanism(s) by which engineered cartilage perceives changes in its hydrodynamic environment and responds by modifying extracellular matrix production and release. 2001 John Wiley & Sons, Inc.

Animals↗

PubMed2001

Insulin in tissue engineering of cartilage: a potential model system for growth factor application.

Investigation of novel experimental application systems for growth factors or other bioactive substances in tissue engineering is often limited by high costs of substances and would benefit from a defined and easily controllable model tissue system. Herein, we demonstrate a potential three-dimensional in vitro system using engineered cartilage as a model tissue and readily available insulin as a model drug. Previously it has been shown that insulin-like growth factor-I (IGF-I) has profound effects on tissue-engineered cartilage in vitro. Insulin is known to bind to the IGF-I receptor and to elicit significant responses in cartilage. In this study, bovine articular chondrocytes were seeded onto biodegradable polyglycolic acid (PGA) scaffolds and cultured for up to 7 weeks. Exogenous insulin (0.05-50 microg/ml) increased the growth rate and the glycosaminoglycan fraction of tissue-engineered cartilage, decreased the cell number in the tissue constructs, and improved the morphological appearance, with 2.5 microg/ml being the most favorable concentration. The observed effects of insulin were similar to effects of IGF-I (0.05 microg/ml) and were in agreement with the reported binding constants of IGF-I and insulin at the IGF-I receptor. Besides the possibility to employ insulin as a potent substance to improve tissue-engineered cartilage, the presented easily controllable in vitro system may be used in the future to evaluate experimental growth factor application devices using economically favorable insulin as a model protein.

Animals↗

PubMed2000

'Stealth' corona-core nanoparticles surface modified by polyethylene glycol (PEG): influences of the corona (PEG chain length and surface density) and of the core composition on phagocytic uptake and plasma protein adsorption.

Nanoparticles possessing poly(ethylene glycol) (PEG) chains on their surface have been described as blood persistent drug delivery system with potential applications for intravenous drug administration. Considering the importance of protein interactions with injected colloidal dug carriers with regard to their in vivo fate, we analysed plasma protein adsorption onto biodegradable PEG-coated poly(lactic acid) (PLA), poly(lactic-co-glycolic acid) (PLGA) and poly(varepsilon-caprolactone) (PCL) nanoparticles employing two-dimensional gel electrophoresis (2-D PAGE). A series of corona/core nanoparticles of sizes 160-270 nm were prepared from diblock PEG-PLA, PEG-PLGA and PEG-PCL and from PEG-PLA:PLA blends. The PEG Mw was varied from 2000-20000 g/mole and the particles were prepared using different PEG contents. It was thus possible to study the influence of the PEG corona thickness and density, as well as the influence of the nature of the core (PLA, PLGA or PCL), on the competitive plasma protein adsorption, zeta potential and particle uptake by polymorphonuclear (PMN) cells. 2-D PAGE studies showed that plasma protein adsorption on PEG-coated PLA nanospheres strongly depends on the PEG molecular weight (Mw) (i.e. PEG chain length at the particle surface) as well as on the PEG content in the particles (i.e. PEG chain density at the surface of the particles). Whatever the thickness or the density of the corona, the qualitative composition of the plasma protein adsorption patterns was very similar, showing that adsorption was governed by interaction with a PLA surface protected more or less by PEG chains. The main spots on the gels were albumin, fibrinogen, IgG, Ig light chains, and the apolipoproteins apoA-I and apoE. For particles made of PEG-PLA45K with different PEG Mw, a maximal reduction in protein adsorption was found for a PEG Mw of 5000 g/mole. For nanospheres differing in their PEG content from 0.5 to 20 wt %, a PEG content between 2 and 5 wt % was determined as a threshold value for optimal protein resistance. When increasing the PEG content in the nanoparticles above 5 wt % no further reduction in protein adsorption was achieved. Phagocytosis by PMN studied using chemiluminescence and zeta potential data agreed well with these findings: the same PEG surface density threshold was found to ensure simultaneously efficient steric stabilization and to avoid the uptake by PMN cells. Supposing all the PEG chains migrate to the surface, this would correspond to a distance of about 1.5 nm between two terminally attached PEG chains in the covering 'brush'. Particles from PEG5K-PLA45K, PEG5K-PLGA45K and PEG5K-PCL45K copolymers enabled to study the influence of the core on plasma protein adsorption, all other parameters (corona thickness and density) being kept constant. Adsorption patterns were in good qualitative agreement with each other. Only a few protein species were exclusively present just on one type of nanoparticle. However, the extent of proteins adsorbed differed in a large extent from one particle to another. In vivo studies could help elucidating the role of the type and amount of proteins adsorbed on the fate of the nanoparticles after intraveinous administration, as a function of the nature of their core. These results could be useful in the design of long circulating intravenously injectable biodegradable drug carriers endowed with protein resistant properties and low phagocytic uptake.

Journal Article↗

PubMed1999

Complement activation by model drug carriers for intravenous application: determination by two-dimensional electrophoresis.

The interactions of intravenously injected drug carriers with blood proteins are considered as an important factor for the fate of the particles after their administration. Protein adsorption on latex particles applied as model for intravenous drug carriers was analysed using two-dimensional electrophoresis (2-DE). The particles were incubated in citrated plasma, serum and heat-inactivated serum, respectively. Incubation in the various media resulted in clear differences in the protein adsorption patterns. Two characteristic protein spots were determined to be enriched on the 2-DE gels only after incubation of the particles in serum. Employing N-terminal microsequencing these protein spots were identified to be fragments of the complement protein C3. Enrichment of these particular spots was most likely a result of complement activation by the particles. Mechanism of C3 binding to the particle surface and subsequent inactivation by cleavage are discussed in order to explain the results. It could be demonstrated that 2-DE analysis provides the possibility to distinguish between adsorption and covalent attachment of C3 to particulate surfaces. The findings indicate that complement activation was caused by covalent binding of the C3 component C3b to the particles' surface. The influence of the incubation medium on the in vitro protein adsorption of particulate drug carriers has to be considered when a correlation between the protein adsorption pattern and the in vivo behaviour of the particles is approached.

Adsorption↗

PubMed1998

Plasma protein adsorption on biodegradable microspheres consisting of poly(D,L-lactide-co-glycolide), poly(L-lactide) or ABA triblock copolymers containing poly(oxyethylene). Influence of production method and polymer composition.

Biodegradable particulate systems have been considered as parenteral drug delivery systems. The adsorption of plasma proteins on micro- and nanoparticles is determined by the surface properties and may, in turn, strongly influence the biocompatibility and biodistribution of both carriers. In the present study the influence of the polymer composition and the production method of microspheres on the in vitro plasma protein adsorption were investigated using two-dimensional electrophoresis (2-DE). Microparticles were prepared from poly(l-lactide) (l-PLA), poly(d,l-lactide-co-glycolide) (PLGA), and ABA triblock copolymers containing hydrophilic poly(oxyethylene) (B-blocks) domains connected to hydrophobic polyesters (A-blocks). Two different microencapsulation methods were employed, namely the w/o/w emulsion solvent evaporation method and the spray-drying technique. It could be demonstrated that the polymer composition and, especially, the encapsulation technique, influenced the interactions with plasma proteins significantly. For example, the percentages of several apolipoproteins in the plasma protein adsorption patterns of spray-dried PLGA- and l-PLA-particles were distinctly higher when compared to the adsorption patterns of the particles produced by the w/o/w-technique. Some adsorbed proteins were found to be characteristic or even specific for particles produced by the same method or consisting of identical polymers. Polyvinyl alcohol used as stabilizer in the w/o/w-technique may decisively influence the surface properties relevant for protein adsorption. The plasma protein adsorption on particles composed of ABA copolymers was drastically reduced when compared to microspheres made from pure polyesters. The adsorption patterns of ABA-particles were dominated by albumin. The plasma protein adsorption patterns detected on the different microspheres are likely to affect their in vivo performance as parenteral drug delivery systems.

Adsorption↗

PubMed1998

Analysis of plasma protein adsorption on polymeric nanoparticles with different surface characteristics.

Plasma protein adsorption patterns on colloidal drug carriers acquired after i.v. administration depend on their surface characteristics and are regarded as key factors for their in vivo organ distribution. Polymeric latex particles with strongly differing surface properties were synthesized as models for colloidal drug carriers for tissue-specific drug targeting via the intravenous route. Physicochemical characterization was performed for size, surface charge density, zeta potential, and surface hydrophobicity. The interactions with human plasma proteins were studied by way of two-dimensional polyacrylamide gel electrophoresis (2-D PAGE). Considerable differences in protein adsorption on the latex particles were detected with regard to the total amount of surface-bound protein on the various particle types as well as specific proteins adsorbed, for example, fibrinogen, albumin, and a recently identified plasma glycoprotein. Possible correlations between protein adsorption patterns and the physicochemical characteristics and topography of the polymeric surfaces are shown and discussed. Knowledge about protein-nanoparticle interactions can be utilized for the rational design of colloidal drug carriers and also may be useful for optimizing implants and medical devices.

Amino Acid Sequence↗

PubMed1998

The influence of the sample preparation on plasma protein adsorption patterns on polysaccharide-stabilized iron oxide particles and N-terminal microsequencing of unknown proteins.

The in vivo organ distribution of i.v. injected drug carriers is strongly influenced by the adsorption of plasma proteins after i.v. injection, e.g. uptake by the mononuclear phagocytic system (MPS). 2-D PAGE could be established to analyze plasma protein adsorption patterns on polysaccharide-stabilized aqueous iron oxide dispersions used as contrast agents in Magnetic Resonance Imaging (MRI). After incubation in human plasma, centrifugation, a washing procedure and a solubilization step were carried out to obtain the proteins adsorbed onto these ultrasmall particles (65 nm in diameter). Patterns of adsorbed proteins were analyzed in dependence on the washing medium used, i.e. highly purified water, phosphate buffered saline and Krebs buffer pH 7.4. Conductivity and composition of the washing medium influenced the adsorption of IgG onto the particles, but had little effect on the other proteins present. IgG was strongly reduced when using the relatively high conductive buffers. The more stabilizing polysaccharide was desorbed the larger was the total amount of adsorbed proteins. Appearance of two unknown chains of spots in the range of appr. 92 kDa, accounting for appr. 10% and 2% of the overall detected protein amount, was observed only when using Krebs buffer during the washing process. Performing N-terminal microsequencing one unknown chain of spots could be identified as a dimer of fibrinogen gamma chains.

Adsorption↗

PubMed1997

Identification of plasma proteins facilitated by enrichment on particulate surfaces: analysis by two-dimensional electrophoresis and N-terminal microsequencing.

Plasma protein adsorption on intravenously injectable drug carriers is regarded as an important factor for the fate of the particles in the body after their administration. Therefore, the plasma protein adsorption patterns on a number of different carrier systems were analyzed in vitro employing two-dimensional electrophoresis (2-DE). The particulate systems presented in this study were polystyrene (PS) model particles, PS nanoparticles surface-modified by adsorption of a surfactant, a commercial fat emulsion, and magnetic iron oxide particles used as contrast agents in magnetic resonance imaging. Most of the spots in the plasma protein adsorption patterns could be identified by matching the resulting 2-DE gels with a reference map of human plasma proteins. Several other proteins that indicated preferentially adsorbed proteins on the surface of the particles investigated have either not been identified on the reference map, or their identity was found to be ambiguous. The relevant proteins are all present in plasma in low abundance. Since these proteins were strongly enriched on the surface of the particles, the resulting spots on the 2-DE gels were successfully identified by N-terminal microsequencing. With this approach, two chains of spots, designated PLS:6 and PLS:8, were determined on a plasma reference map: inter-alpha-trypsin inhibitor family heavy chain-related protein (also named PK-120) and a dimer of fibrinogen gamma, respectively. Plasma gelsolin is presented in a 2-DE adsorption pattern of PS model particles. One of the main proteins adsorbed by droplets of a commercial fat emulsion was identified as apoliprotein H. Moreover, the positions of apolipoproteins apoC-II and apoC-III were also verified on the 2-DE protein map of human plasma. Thus, protein adsorption experiments of the kind presented in this study are increasing our insight into human plasma proteins.

Amino Acid Sequence↗