Search PubMed⌕ Search

Biomedical subjects

S J Perkins

Publications and source records attributed to S J Perkins.

At least 37 records · Page 2Linked to original sources

Identification and three-dimensional structural analysis of nine novel mutations in patients with prothrombin deficiency.

Prothrombin deficiency is an autosomal recessive disorder associated with a moderately severe bleeding tendency. In this study, 13 patients with prothrombin deficiency were screened for the presence of alterations in the prothrombin gene, and nine novel candidate mutations were identified. Of 11 patients with hypoprothrombinemia, ten are homozygous for five mutations and one patient is a compound heterozygote. The two patients with dysprothrombinemia are homozygous for two mutations. Eight of nine mutations are missense ones associated with single amino acid substitutions in the propeptide (Arg-1Gln, Arg-2Trp), the kringle-1 (Asp118Try) and kringle-2 (Arg220Cys) domains and the catalytic serine protease domain (Gly330Ser, Ser354Arg. Arg382His and Arg538Cys). The ninth mutation is an in-frame deletion of 3 bp that results in the omission of one amino acid (del Lys 301/302). The combination of these missense mutations with crystal structures for alpha-thrombin and the prothrombin fragments 1 and 2 resulted in new insight into the function of alpha-thrombin. The hypoprothrombinemia mutations were inferred to affect either the cleavage of the propeptide from the Gla domain, the stability of the kringle-1 and -2 domains, or the close association of the A and B chains of the serine protease domain. The dysprothrombinemia mutations were inferred to directly affect catalytic function through their location at the active site crevice or exosite 1 within the serine protease domain.

Adolescent↗

Identification of type 2 von Willebrand disease in previously diagnosed type 1 patients: a reappraisal using phenotypes, genotypes and molecular modelling.

In order to investigate the possibility that qualitative type 2 defects in von Willebrand factor (VWF) occurred in patients previously diagnosed with quantitative type 1 von Willebrand disease (VWD), the phenotypes and genotypes were reanalysed in 30 patients who exhibited discrepant VWF activity/VWF:Ag ratios of less than 0.7. The capacity of VWF to bind to glycoprotein Ib (GpIb) was reassessed using the ristocetin co-factor activity (VWF:RiCo) assay compared to an in-house and a commercial ELISA assay (based on a mAb directed against the GpIb binding site on VWF). This was supplemented by multimeric analysis and the amplification and sequencing of a 936 bp fragment of exon 28 of the VWF gene with the aim of identifying mutations in the A1 domain. On reappraisal, using the VWF:RiCo assay all patients demonstrated a disproportionately reduced VWF:RiCo/VWF:Ag ratio, indicative of a qualitative defect, while abnormal ratios were detected in only seven kindreds using the in-house ELISA assay and in only one kindred with the commercial ELISA assay. Eight single amino acid substitutions were found in nine kindreds, four of which were novel candidate VWF mutations and four previously described in association with type 2 VWD. In agreement with the phenotype, the novel VWF mutations were located in the VWF-A1 crystal structure at positions that corresponded to potential type 2M defects. This study underlines the difficulties of correct diagnosis of the subtype of VWD and emphasises the importance of using sensitive phenotypic assays, the relevance of the VWF:RiCo/ VWF:Ag ratio, multimeric analysis and molecular modelling analysis.

Amino Acid Substitution↗

Identification of the C3b binding site in a recombinant vWF-A domain of complement factor B by surface-enhanced laser desorption-ionisation affinity mass spectrometry and homology modelling: implications for the activity of factor B.

Factor B is a key component of the alternative pathway of the complement system. During complement activation, factor B complexed with activated C3 is cleaved into the Ba and Bb fragments by the protease factor D to form the C3 convertase from the complex between C3b and Bb. The Ba fragment contains three short consensus/complement repeat (SCR) domains, and the Bb fragment contains a von Willebrand factor type A (vWF-A) domain and a serine protease (SP) domain. Surface-enhanced laser desorption-ionization affinity mass spectrometry (SELDIAMS) was used to investigate the reaction of factor B with immobilised activated C3(NH3) in the presence of Mg(2+). A recombinant vWF-A domain (residues G229-Q448), the native Ba and Bb fragments and native factor B all demonstrated specific interactions with C3(NH3), while no interactions were detected using bovine serum albumin as a control. A mass analysis of the proteolysis of the vWF-A domain when this was bound to immobilised C3(NH3) identified two peptides (residues G229-K265 and T355-R381) that were involved with vWF-A binding to C3(NH3). A homology model for the vWF-A domain was constructed using the vWF-A crystal structure in complement receptor type 3. Comparisons with five different vWF-A crystal structures showed that large surface insertions were present close to the carboxyl and amino edges of the central beta-sheet of the factor B vWF-A structure. The peptides G229-K265 and T355-R381 corresponded to the two sides of the active site cleft at the carboxyl edge of the vWF-A structure. The vWF-A connections with the SCR and SP domains were close to the amino edge of this vWF-A beta-sheet, and shows that the vWF-A domain can be involved in both C3b binding and the regulation of factor B activity. These results show that (i) a major function of the vWF-A domain is to bind to activated C3 during the formation of the C3 convertase, which it does at its active site cleft; and that (ii) SELDIAMS provides an efficient means of identifying residues involved in protein-protein interactions.

Amino Acid Sequence↗

Production and functional activity of a recombinant von Willebrand factor-A domain from human complement factor B.

Factor B is a five-domain 90 kDa serine protease proenzyme which is part of the human serum complement system. It binds to other complement proteins C3b and properdin, and is activated by the protease factor D. The fourth domain of factor B is homologous to the type A domain of von Willebrand Factor (vWF-A). A full-length human factor B cDNA clone was used to amplify the region encoding the vWF-A domain (amino acids 229-444 of factor B). A fusion protein expression system was then used to generate it in high yield in Escherichia coli, where thrombin cleavage was used to separate the vWF-A domain from its fusion protein partner. A second vWF-A domain with improved stability and solubility was created using a Cys(267)-->Ser mutation and a four-residue C-terminal extension of the first vWF-A domain. The recombinant domains were investigated by analytical gel filtration, sucrose density centrifugation and analytical ultracentrifugation, in order to show that both domains were monomeric and possessed compact structures that were consistent with known vWF-A crystal structures. This expression system and its characterization permitted the first investigation of the function of the isolated vWF-A domain. It was able to inhibit substantially the binding of (125)I-labelled factor B to immobilized C3b. This demonstrated both the presence of a C3b binding site in this portion of factor B and a ligand-binding property of the vWF-A domain. The site at which factor D cleaves factor B is close to the N-terminus of both recombinant vWF-A domains. Factor D was shown to cleave the vWF-A domain in the presence or absence of C3b, whereas the cleavage of intact factor B under the same conditions occurs only in the presence of C3b.

Amino Acid Sequence↗

The Fab and Fc fragments of IgA1 exhibit a different arrangement from that in IgG: a study by X-ray and neutron solution scattering and homology modelling.

Human immunoglobulin A (IgA) is an abundant antibody that mediates immune protection at mucosal surfaces as well as in plasma. The IgA1 isotype contains two four-domain Fab fragments and a four-domain Fc fragment analogous to that in immunoglobulin G (IgG), linked by a glycosylated hinge region made up of 23 amino acid residues from each of the heavy chains. IgA1 also has two 18 residue tailpieces at the C terminus of each heavy chain in the Fc fragment. X-ray scattering using H2O buffers and neutron scattering using 100 % 2H2O buffers were performed on monomeric IgA1 and a recombinant IgA1 that lacks the tailpiece (PTerm455). The radii of gyration RG from Guinier analyses were similar at 6.11-6.20 nm for IgA1 and 5.84-6.16 nm for PTerm455, and their cross-sectional radii of gyration RXS were also similar. The similarity of the RG and RXS values suggests that the tailpiece of IgA1 is not extended outwards in solution. The IgA1 RG values are higher than those for IgG, and the distance distribution function P(r) showed two distinct peaks, whereas a single peak was observed for IgG. Both results show that the hinge of IgA1 results in an extended Fab and Fc arrangement that is different from that in IgG. Automated curve-fit searches constrained by homology models for the Fab and Fc fragments were used to model the experimental IgA1 scattering curves. A translational search to optimise the relative arrangement of the Fab and Fc fragments held in a fixed orientation resembling that in IgG was not successful in fitting the scattering data. A new molecular dynamics curve-fit search method generated IgA1 hinge structures to which the Fab and Fc fragments could be connected in any orientation. A search based on these identified a limited family of IgA1 structures that gave good curve fits to the experimental data. These contained extended hinges of length about 7 nm that positioned the Fab-to-Fab centre-to-centre separation 17 nm apart while keeping the corresponding Fab-to-Fc separation at 9 nm. The resulting extended T-shaped IgA1 structures are distinct from IgG structures previously determined by scattering and crystallography which have Fab-to-Fab and Fab-to-Fc centre-to-centre separations of 7-9 nm and 6-8 nm, respectively. It was concluded that the IgA1 hinge is structurally distinct from that in IgG, and this results in a markedly different antibody structure that may account for a unique immune role of monomeric IgA1 in plasma and mucosa.

Amino Acid Sequence↗

A synthetic holliday junction is sandwiched between two tetrameric Mycobacterium leprae RuvA structures in solution: new insights from neutron scattering contrast variation and modelling.

The interaction between homologous DNA molecules in recombination and DNA repair leads to the formation of crossover intermediates known as Holliday junctions. Their enzymatic processing by the RuvABC system in bacteria involves the formation of a complex between RuvA and the Holliday junction. To study the solution structure of this complex, contrast variation by neutron scattering was applied to Mycobacterium leprae RuvA (MleRuvA), a synthetic analogue of a Holliday junction with 16 base-pairs in each arm, and their stable complex. Unbound MleRuvA was octameric in solution, and formed an octameric complex with the DNA junction. The radii of gyration at infinite contrast were determined to be 3.65 nm, 2.74 nm and 4.15 nm for MleRuvA, DNA junction and their complex, respectively, showing that the complex was structurally more extended than MleRuvA. No difference was observed in the presence or absence of Mg2+. The large difference in RG values for the free and complexed protein in 65% 2H2O, where the DNA component is "invisible", showed that a substantial structural change had occurred in complexed MleRuvA. The slopes of the Stuhrmann plots for MleRuvA and the complex were 19 and 15 or less (x10(-5)), respectively, indicating that DNA passed through the centre of the complex. Automated constrained molecular modelling based on the Escherichia coli RuvA crystal structure demonstrated that the scattering curve of octameric MleRuvA in 65% and 100% 2H2O is explained by a face-to-face association of two MleRuvA tetramers stabilised by salt-bridges. The corresponding modelling of the complex in 65% 2H2O showed that the two tetramers are separated by a void space of about 1-2 nm, which can accommodate the width of B-form DNA. Minor conformational changes between unbound and complexed MleRuvA may occur. These observations show that RuvA plays a more complex role in homologous recombination than previously thought.

Amino Acid Sequence↗

Possible arrangement of the five domains in human complement factor I as determined by a combination of X-ray and neutron scattering and homology modeling.

Human factor I is a multidomain plasma serine protease with one factor I-membrane attack complex (FIMAC) domain, one CD5 domain, two low-density lipoprotein receptor (LDLr) domains, and one serine protease (SP) domain and is essential for the regulation of complement. The domain arrangement in factor I was determined by X-ray and neutron scattering on serum-derived human factor I (sFI) and recombinant insect cell factor I (rFI). While the radii of gyration of both were the same at 4.05 nm and both had overall lengths of 14 nm, the cross-sectional radii of gyration were different at 1.70 nm for sFI and 1.57 nm for rFI. This difference was attributed to their different means of glycosylation which is complex-type for sFI and high-mannose-type for rFI. Homology models were constructed for the FIMAC, LDLr, and SP domains of factor I using related crystal structures, and CD5 was represented as a globular protein by referencing its electron microscopy dimensions. In these models, 38 of the 40 Cys residues in factor I were predicted to form internal disulfide bridges. The two remaining Cys residues at the N terminus of the FIMAC domain and at the center of the first LDLr domain were potentially not bridged. It was postulated that, if these two Cys residues were bridged to each other, the FIMAC, CD5, and LDLr-1 domains would form a compact triangular arrangement. This hypothesis was tested by automated scattering curve fit searches based on 9600 bilobal models, setting the FIMAC, CD5, and LDLr-1 domains as one lobe and the large SP domain as the other lobe. The searches gave a single small family of similar structures with a separation of 5.9 nm between the centers of the lobes which gave similar good X-ray and neutron fits for both sFI and rFI, despite the different glycosylations of sFI and rFI. These best-fit structures for factor I showed that this domain model is plausible, and suggested that the SP and the CD5 and LDLr-1 domains may present exposed surfaces in factor I whose roles are to interact separately with its substrates C3b and C4b and with cofactor proteins.

Amino Acid Sequence↗

The solution structure of human coagulation factor VIIa in its complex with tissue factor is similar to free factor VIIa: a study of a heterodimeric receptor-ligand complex by X-ray and neutron scattering and computational modeling.

Factor VIIa (FVIIa) is a soluble four-domain plasma serine protease coagulation factor that forms a tight complex with the two extracellular domains of the transmembrane protein tissue factor in the initiating step of blood coagulation. To date, there is no crystal structure for free FVIIa. X-ray and neutron scattering data in solution for free FVIIa and the complex between FVIIa and soluble tissue factor (sTF) had been obtained for comparison with crystal structures of the FVIIa-sTF complex and of free factor IXa (FIXa). The solution structure of free FVIIa as derived from scattering data is consistent with the extended domain arrangement of FVIIa seen in the crystal structure of its complex with sTF, but is incompatible with the bent, less extended domain conformation seen in the FIXa crystal structure. The FVIIa scattering curve is also compatible with a subset of 317 possible extended structures derived from a constrained automated conformational search of 15 625 FVIIa domain models. Thus, the scattering data support extended domain models for FVIIa free in solution. Similar analyses showed that the solution scattering derived and crystal structures of the FVIIa-sTF complex were in good agreement. An automated constrained search for allowed structures for the complex in solution based on scattering curves showed that only a small family of compact models gave good agreement, namely those in which FVIIa and sTF interact closely over a large surface area. The general utility of this approach for structural analysis of heterodimeric complexes in solution is discussed. Analytical ultracentrifugation data and the modeling of these data were consistent with the scattering results. It is concluded that in solution FVIIa has an extended or elongated domain structure, which allows rapid interaction with sTF over a large surface area to form a high-affinity complex.

Amino Acid Sequence↗

Molecular modeling of ligand and mutation sites of the type A domains of human von Willebrand factor and their relevance to von Willebrand's disease.

von Willebrand factor (vWF) is a large multimeric, multidomain glycoprotein found in platelets, endothelial cells and plasma. The A1, A2, and A3 domains in vWF mediate binding to glycoprotein Ib, ristocetin, botrocetin, collagen, sulphatides, and heparin and provide a protease cleavage site. Mutations causing types 2B, 2M, and 2A von Willebrand's disease (vWD) are located in the A1 and A2 domains. Homology modeling was performed to provide a molecular interpretation of vWF function and mutation sites. This was based on our previous alignment of 75 vWF-A sequences, the doubly wound alpha/beta fold seen in recent vWF-A crystal structures from complement receptor type 3 and lymphocyte function-associated antigen-1, and our new alignment of 28 vWF A1 and A2 sequences from different species. The active site in doubly-wound alpha/beta folds forms a crevice that is located at the switch point between the two halves of the central beta-sheet, and usually contains two metal-binding Asp residues in the vWF-A superfamily. Although one of these Asp residues is absent from the A1, A2, and A3 domains, this crevice is shown to correspond to the ristocetin binding site in the A1 domain and the protease cleavage site in the A2 domain. The residues R571-K572-R578-R579-K585 are found to be conserved in 28 A1 sequences and are predicted to constitute the heparin binding site in the A1 domain. Inspection of the type 2M vWD mutation sites that are involved in downregulation of glycoprotein Ib (GpIb) binding to vWF shows that these are spatially clustered at the carboxyl-edge of the beta-sheet and above it in the A1 domain and may directly perturb GpIb binding. In contrast, the type 2B vWD mutation sites that are involved in upregulation of GpIb binding to vWF are spatially clustered at the amino edge of this beta-sheet and below it and are located on the opposite side of the A1 domain from the type 2M mutation sites. The type 2B mutations are located between the heparin and GpIb binding sites. Because heparin binding inhibits the interaction with GpIb, this provides an explanation of vWF upregulation. The type 2A vWD mutation sites in the A2 domain correspond to buried residues that are otherwise 100% conserved across all 28 species, and are likely to be important for the correct folding of the A2 domain and its physiologically important protease site.

Amino Acid Sequence↗

Conserved basic residues in the C-type lectin and short complement repeat domains of the G3 region of proteoglycans.

Aggrecan is the major proteoglycan of the extracellular matrix in cartilage. It contains two N-terminal globular regions, G1 and G2, and one C-terminal globular region, G3. G3 is implicated in the intracellular processing of aggrecan and contains a C-type lectin carbohydrate recognition domain (CRD), frequent occurrences of a C-terminal short complement repeat (SCR) domain, and occasionally an N-terminal epidermal growth factor domain. The CRD and SCR domains in 13 G3 sequences were each subjected to structural analysis. Alignment of 131 sequences from all seven groups in the CRD superfamily defined a consensus length of 136 residues, in which 32% of residues were conserved. Although the G3 CRD sequences agreed with this consensus, they also contained five fully conserved basic residues that are atypical of the CRD superfamily. Homology modelling showed that four of these residues are located on a surface region on the CRD that is separate from the Ca2+-binding residues involved in carbohydrate interactions. One conserved basic residue is identical in position with that of a conserved basic residue that mediates hyaluronate binding in the structurally related proteoglycan tandem repeat (PTR) domain in G1 and in link protein. The alignment of 13 G3 SCR sequences with 101 sequences in the SCR superfamily showed good agreement with conserved residues in the SCR superfamily. There are also five conserved basic residues in the G3 SCR that are atypical of the SCR superfamily, and homology modelling showed that all five were located on one surface of the SCR. It is concluded that both the CRD and SCR domains in G3 possess basic residues that are atypical of their superfamilies and might be related to function, and that the G3 CRD domain shows an evolutionary relationship to the PTR domain in G1.

Aggrecans↗

Molecular structures from low angle X-ray and neutron scattering studies.

Molecular structures can be extracted from solution scattering analyses of multidomain or oligomeric proteins by a new method of constrained automated scattering curve fits. Scattering curves are calculated using a procedure tested by comparisons of crystal structures with experimental X-ray and neutron data. The domains or subunits in the protein of interest are all represented by atomic coordinates in order to provide initial constraints. From this starting model, hundreds or thousands of different possible structures are computed, from each of which a scattering curve is computed. Each model is assessed for steric overlap, radii of gyration and R-factors in order to leave a small family of good fit models that corresponds to the molecular structure of interest. This method avoids the tedium of curve fitting by hand and error limits on the ensuing models can be described. For single multidomain proteins, the key constraint is the correct stereochemical connections between the domains in all the models. Successful applications to determine structures are summarised for the Fab and Fc fragments in immunoglobulin G, the three domain pairs in the Fc subunit of immunoglobulin E and the seven, domains in carcinoembryonic antigen. For oligomeric proteins, the key constraint is provided by symmetry and successful analyses were performed for the association of the monomers of the bacterial amide sensor protein AmiC to form trimers and pentameric serum amyloid P component to form decameric structures. The successful analysis of the heterodimeric complex of tissue factor and factor VIIa required the use of constraints provided from biochemical data. The outcome of these analyses is critically appraised, in particular the biological significance of structures determined by these solution scattering curve fits.

Animals↗

Human complement factor I: its expression by insect cells and its biochemical and structural characterisation.

Factor I is a five-domain plasma serine protease which is essential for the regulation of the complement system. In order to express this, the factor I coding sequence was cloned into a recombinant baculovirus system, which was used to infect Trichoplusia ni cells. Using the native factor I leader sequence, recombinant factor I (rFI) was secreted into the culture medium. Purified rFI was recognised by polyclonal antisera and by the factor I-specific monoclonal antibody MRC-OX21. SDS PAGE showed that rFI was processed into two chains with molecular weights of 48,000 and 36,000. Amino acid sequence analysis showed that the N-terminal sequences of the rFI chains were the same as those of serum-derived factor I (sFI), confirming that processing was correct. Since both molecular weights were less than those observed for sFI, this is attributed to the replacement of complex-type oligosaccharides by high mannose ones in rFI. C3(NH,) cleavage assays showed that rFI had 55% the activity of sFI. Circular dichroism and Fourier transform infrared spectroscopy showed that the protein folding of rFI and sFI were very similar. Both had a secondary structure low in alpha-helix and high in beta-sheet, as expected from crystal structure and multiple sequence alignment analyses. It is inferred that the reduced activity of rFI is attributable to its changed glycosylation. The availability of rFI and structures for the domains in factor I makes possible new approaches to determine the molecular basis of its interactions with factor H and C3b.

Animals↗

Analogy and solution scattering modelling: new structural strategies for the multidomain proteins of complement, cartilage and the immunoglobulin superfamily.

Many immunologically relevant proteins possess multidomain structures. Molecular structures both at the level of the individual domain and that of the intact protein are required for a full appreciation of function and control. Two recently developed structural approaches are reviewed here. Analogy modelling methods are based on the current understanding of many protein structures, and make possible the identification of folds for superfamilies of unknown structures. An integrated multidisciplinary predictive approach has been successfully applied to the von Willebrand factor type A, proteoglycan tandem repeat and factor I/membrane attack complex domains. The available experimental and predictive evidence is assembled in order to identify a known three-dimensional structure related to the unknown one of interest. Neutron and X-ray scattering curve modelling provides information on the full multidomain structure in solution. As scattering curves can be calculated from known atomic structures, the present availability of structures for many domains in conjunction with tight constraints based on these structures and the covalent connections between them results in a small family of allowed best-fit structures for a given scattering curve. The curve-fit procedure can be automated, and whole multidomain structures can be determined to a positional precision of the order of 0.2-1 nm. Such models are informative on the steric accessibility of each domain and their functional activity, and this is illustrated for antibody, cell-surface and complement proteins.

Animals↗

Pentameric and decameric structures in solution of serum amyloid P component by X-ray and neutron scattering and molecular modelling analyses.

Human serum amyloid P component (SAP) is a normal plasma glycoprotein and the precursor of amyloid P component which is a universal constituent of the abnormal tissue deposits in amyloidosis. X-ray and neutron scattering data showed that pentameric or decameric ring structures for SAP in solution are readily distinguished. Further neutron data collection showed that SAP pentamers were reproducibly obtained in the presence of Ca2+ at pH 5.5 or in the presence of methyl 4,6-O-(1-carboxyethylidene)-beta-d-galactopyranoside (MObetaDG) and Ca2+ at pH 6.0 to 8.0, while SAP decamers were obtained in the presence of EDTA between pH 5.5 and 8.0. SAP pentamers have a mean X-ray RG of 3.99(+/-0.11) nm and a mean neutron RG of 3.69(+/-0.12) nm in 100% 2H2O. SAP decamers have a mean X-ray RG of 4.23(+/-0.12) nm and a mean neutron RG of 4.09(+/-0.14) nm in 100% 2H2O. The absorption coefficients of SAP pentamers and decamers differ by 10%. If we infer that the two alpha-helical A-faces are in contact with each other in the SAP decamer, the lack of structural change of the decamer with pH may be explained by the absence of His residues from the A-face of the SAP pentamer, and the change in absorption coefficients is compatible with the presence of Trp residues at this A-face. The rigid ring structure of pentameric SAP provided a test of scattering curves calculated from crystal structures. The only structural unknown is the orientation of the five chemically homogeneous oligosaccharide chains relative to the protein, but extended oligosaccharide structures were found to account for its scattering curve. X-ray scattering curves were best calculated using a hydrated structure, while neutron scattering curves were best calculated using an unhydrated structure. The outcome of these analyses was used to model the structure of decameric SAP. The evaluation of 640 structures for two SAP pentamers brought face-to-face to form SAP decamers gave better curve fits for structures in which the two A-faces were in contact with each other, in which it is likely that the two pentamers were out of alignment by a rotation of 36 degrees and the oligosaccharide chains were extended.

Carbohydrate Conformation↗

Oligomerization of the amide sensor protein AmiC by x-ray and neutron scattering and molecular modeling.

AmiC is the negative regulator of the amidase operon which is involved in amide metabolism in the cytosol of Pseudomonas aeruginosa. Crystal structures show that AmiC contains two large domains that are very similar to the periplasmic leucine-isoleucine-valine binding protein (LivJ) of Escherichia coli. Synchrotron X-ray and neutron (in 100% 2H2O buffer) scattering data were obtained for AmiC in the presence of its substrate acetamide and its anti-inducer butyramide which binds more weakly to AmiC than acetamide. Guinier analyses to obtain radius of gyration RG and molecular weight Mr values showed that AmiC formed trimers whose formation was favored in the presence of acetamide and which exhibited concentration-dependent properties at concentrations between 0.4 and 2 mg/mL. Above 2 mg/mL, where trimers predominated, the RG data were identical within 0.05 nm for AmiC-acetamide and AmiC-butyramide with mean X-ray and neutron RG values of 3.35 and 3. 28 nm, respectively. Scattering curve fits constrained by the crystal structure of AmiC-acetamide were evaluated in order to describe a model for trimeric AmiC. A translational search of parallel alignments of three monomers to form a symmetric AmiC homotrimer gave a good X-ray curve fit. Combinations of calculated curves for monomeric, dimeric, trimeric, and tetrameric AmiC as seen in the crystal structure of AmiC gave reasonable but weaker X-ray curve fits which did not favor the existence of tetrameric AmiC. It is concluded that AmiC exhibits novel ligand-dependent oligomerization properties in solution when these are compared to other members of the periplasmic binding protein superfamily, where AmiC exists in monomeric and trimeric forms, the proportions of which depend on the presence of acetamide or butyramide.

Bacterial Proteins↗

Degradation of C1-inhibitor by plasmin: implications for the control of inflammatory processes.

BACKGROUND: A correct balance between protease and inhibitor activity is critical in the maintenance of homoeostasis; excessive activation of enzyme pathways is frequently associated with inflammatory disorders. Plasmin is an enzyme ubiquitously activated in inflammatory disorder, and C1-inhibitor (C1-Inh) is a pivotal inhibitor of protease activity, which is particularly important in the regulation of enzyme cascades generated in plasma. The nature of the interaction between plasmin and C1-Inh is poorly understood. MATERIALS AND METHODS: C1-Inh was immunoadsorbed from the plasma of normal individuals (n = 21), from that of patients with systemic lupus erythematosus (n = 18) or adult respiratory distress syndrome (n = 9), and from the plasma and synovial fluid of patients with rheumatoid arthritis (n = 18). As plasmin is a putative enzyme responsible for C1-Inh was examined using SDS-PAGE. In addition, peptides cleaved from C1-Inh by plasmin were isolated and sequenced and the precise cleavage sites determined from the known primary sequence of C1-Inh. Homology models of C1-Inh were then constructed. RESULTS: Increased levels of cleaved and inactivated C1-Inh were found in each of the inflammatory disorders examined. Through SDS-PAGE analysis it was shown that plasmin rapidly degraded C1-Inh in vitro. The pattern of C1-Inh cleavage seen in vivo in patients with inflammatory disorders and that produced in vitro following incubation with plasmin were very similar. Homology models of C1-Inh indicate that the majority of the plasmin cleavage sites are adjacent to the reactive site of the inhibitor. CONCLUSIONS: This study suggests that local C1-Inh degradation by plasmin may be a central and critical event in the loss of protease inhibition during inflammation. These findings have important implications for our understanding of pathogenic mechanisms in inflammation and for the development of more effectively targeted therapeutic regimes. These findings may also explain the efficacy of anti-plasmin agents in the treatment of C1-Inh deficiency states, as they may diminish plasmin-mediated C1-Inh degradation.

Adult↗