Search PubMed⌕ Search

Biomedical subjects

S J Perkins

Publications and source records attributed to S J Perkins.

At least 19 recordsLinked to original sources

Structure of complement receptor (CR) 2 and CR2-C3d complexes.

Using X-ray crystallography, we have determined the structure of the first two short consensus repeats (SCRs) of human complement receptor (CR) 2 in complex with C3d. These studies revealed: (i) a primary site of interaction for C3d within SCR2 of CR2, (ii) a hydrophobic patch holding SCR1 to SCR2 in a rigid V-shape, (iii) a dimer formed by interactions between SCR1 of each molecule, (iv) several non-linear sequences on C3d that interact with CR2 and (v) mutations of C3d amino acids within the co-crystal interface that resulted in decreased binding. In addition, a polymorphism that results in decreased C3d binding and introduces a new glycosylation site predicted to disrupt the dimer interface was found in the New Zealand White autoimmune mouse strain. Although the co-crystal complex results are in agreement with a subset of prior studies, our additional findings, which demonstrate an extended SCR1-SCR2 structure in solution and differences in the kinetics of ligand-receptor interactions with longer forms of CR2, have suggested a more complex receptor-ligand interaction. To characterize this interaction further, several approaches directed at the determination of solution phase interactions as well as the analysis of the three-dimensional structure of CR2 alone and key CR2 mutants will be necessary.

Animals↗

Solution structures of complement components by X-ray and neutron scattering and analytical ultracentrifugation.

The short consensus/complement repeat (SCR) domain (also known as the complement control protein domain) is the most abundant domain type in the complement system. Crystal and NMR structures for proteins that contain single and multiple SCR domains have now been published. These contain inter-SCR linkers of between three and eight residues, and the structures show much variability in inter-SCR orientations. X-ray and neutron scattering, combined with analytical ultracentrifugation and constrained modelling based on known subunit structures will yield a medium-resolution structure for the protein of interest. The fewer parameters that are associated with the structure of interest, the more defined the structure of interest becomes. These solution studies have been applied to several SCR-containing proteins in the complement system, most notably Factor H with 20 SCR domains, a complement receptor type 2 fragment with two SCR domains, and rat complement receptor-related protein (Crry) which contains five SCR domains. The results show great conformational variability in the inter-SCR orientation, and these will be reviewed. Even though the rotational orientation cannot be modelled, it is nonetheless possible to measure the degree of extension of the multi-SCR proteins and, from this, to obtain functionally useful results.

Animals↗

X-ray and neutron scattering analyses of hydration shells: a molecular interpretation based on sequence predictions and modelling fits.

Solution scattering is a low resolution diffraction method that provides important structural data on proteins. The ability to model scattering curves by recourse to known crystal structures for proteins under study significantly improves the resolution (and the utility) of the method because of the strict constraints that the crystal structures impose. For these structure determinations, a molecular description of the effect of hydration shells is needed. In calibration studies used for X-ray scattering curve modelling, it has been reproducibly found that a hydration shell is required. In molecular terms, this results from the higher electron density of the hydration shell compared to that of bulk water, which then becomes similar to that of the protein. This is well represented by a level of 0.3 g H(2)O/g glycoprotein and a water molecule volume of 0.0245 nm(3). Procedures for the addition of a hydration shell to a sphere model of a protein are described. For neutron scattering fits, it is not necessary to incorporate a hydration shell, as to a good approximation this is not detectable. In molecular terms, this apparent absence of the neutron hydration shell results from the effect of proton exchange on the scattering densities of bulk water and bound water which causes these to be similar but different from that of the protein.

Models, Chemical↗

Epitope mapping using the X-ray crystallographic structure of complement receptor type 2 (CR2)/CD21: identification of a highly inhibitory monoclonal antibody that directly recognizes the CR2-C3d interface.

Complement receptor type 2 (CR2)/CD21 is a B lymphocyte cell membrane C3d/iC3b receptor that plays a central role in the immune response. Human CR2 is also the receptor for the EBV viral membrane glycoprotein gp350/220. Both C3d and gp350/220 bind CR2 within the first two of 15-16 repetitive domains that have been designated short consensus/complement repeats. Many mAbs react with human CR2; however, only one currently available mAb is known to block both C3d/iC3b and gp350/220 binding. We have used a recombinant form of human CR2 containing the short consensus/complement repeat 1-2 ligand-binding fragment to immunize Cr2(-/-) mice. Following fusion, we identified and further characterized four new anti-CR2 mAbs that recognize this fragment. Three of these inhibited binding of CR2 to C3d and gp350/220 in different forms. We have determined the relative inhibitory ability of the four mAbs to block ligand binding, and we have used overlapping peptide-based approaches to identify linear epitopes recognized by the inhibitory mAbs. Placement of these epitopes on the recently solved crystal structure of the CR2-C3d complex reveals that each inhibitory mAb recognizes a site either within or adjacent to the CR2-C3d contact site. One new mAb, designated 171, blocks CR2 receptor-ligand interactions with the greatest efficiency and recognizes a portion of the C3d contact site on CR2. Thus, we have created an anti-human CR2 mAb that blocks the C3d ligand by direct contact with its interaction site, and we have provided confirmatory evidence that the C3d binding site seen in its crystal structure exists in solution.

Animals↗

Molecular modelling and experimental studies of mutation and cell-adhesion sites in the fibronectin type III and whey acidic protein domains of human anosmin-1.

Anosmin-1, the gene product of the KAL gene, is implicated in the pathogenesis of X-linked Kallmann's syndrome. Anosmin-1 protein expression is restricted to the basement membrane and interstitial matrix of tissues affected in this syndrome during development. The anosmin-1 sequence indicates an N-terminal cysteine-rich domain, a whey acidic protein (WAP) domain, four fibronectin type III (FnIII) domains and a C-terminal histidine-rich region, and shows similarity with cell-adhesion molecules, such as neural cell-adhesion molecule, TAG-1 and L1. We investigated the structural and functional significance of three loss-of-function missense mutations of anosmin-1 using comparative modelling of the four FnIII and the WAP domains based on known NMR and crystal structures. Three missense mutation-encoded amino acid substitutions, N267K, E514K and F517L, were mapped to structurally defined positions on the GFCC' beta-sheet face of the first and third FnIII domains. Electrostatic maps demonstrated large basic surfaces containing clusters of conserved predicted heparan sulphate-binding residues adjacent to these mutation sites. To examine these modelling results anosmin-1 was expressed in insect cells. The incorporation of the three mutations into recombinant anosmin-1 had no effect on its secretion. The removal of two dibasic motifs that may constitute potential physiological cleavage sites for anosmin-1 had no effect on cleavage. Peptides based on the anosmin-1 sequences R254--K285 and P504--K527 were then synthesized in order to assess the effect of the three mutations on cellular adhesion, using cell lines that represented potential functional targets of anosmin-1. Peptides (10 microg/ml) incorporating the N267K and E514K substitutions promoted enhanced adhesion to 13.S.1.24 rat olfactory epithelial cells and canine MDCK1 kidney epithelial cells (P<0.01) compared with the wild-type peptides. This result was attributed to the introduction of a lysine residue adjacent to the large basic surfaces. We predict that two of the three missense mutants increase the binding of anosmin-1 to an extracellular target, possibly by enhancing heparan sulphate binding, and that this critically affects the function of anosmin-1.

Amino Acid Motifs↗

Folded-back solution structure of monomeric factor H of human complement by synchrotron X-ray and neutron scattering, analytical ultracentrifugation and constrained molecular modelling.

Factor H (FH) is a regulatory cofactor for the protease factor I in the breakdown of C3b in the complement system of immune defence, and binds to heparin and other polyanionic substrates. FH is composed of 20 short consensus/complement repeat (SCR) domains, for which the overall arrangement in solution is unknown. As previous studies had shown that FH can form monomeric or dimeric structures, X-ray and neutron scattering was accordingly performed with FH in the concentration range between 0.7 and 14 mg ml(-1). The radius of gyration of FH was determined to be 11.1-11.3 nm by both methods, and the radii of gyration of the cross-section were 4.4 nm and 1.7 nm. The distance distribution function P(r) showed that the overall length of FH was 38 nm. The neutron data showed that FH was monomeric with a molecular mass of 165,000(+/-17,000) Da. Analytical ultracentrifugation data confirmed this, where sedimentation equilibrium curve fits gave a mean molecular mass of 155,000(+/-3,000) Da. Sedimentation velocity experiments using the g*(s) derivative method showed that FH was monodisperse and had a sedimentation coefficient of 5.3(+/-0.1) S. In order to construct a full model of FH for scattering curve and sedimentation coefficient fits, homology models were constructed for 17 of the 20 SCR domains using knowledge of the NMR structures for FH SCR-5, SCR-15 and SCR-16, and vaccinia coat protein SCR-3 and SCR-4. Molecular dynamics simulations were used to generate a large conformational library for each of the 19 SCR-SCR linker peptides. Peptides from these libraries were combined with the 20 SCR structures in order to generate stereochemically complete models for the FH structure. Using an automated constrained fit procedure, the analysis of 16,752 possible FH models showed that only those models in which the 20 SCR domains were bent back upon themselves were able to account for the scattering and sedimentation data. The best-fit models showed that FH had an overall length of 38 nm and is flexible. This length is significantly less than a predicted length of 73 nm if the 20 SCR structures had been arranged in an extended arrangement. This outcome is attributed to several long linker sequences. These bent-back domain structures may correspond to conformational flexibility in FH and enable the multiple FH binding sites for C3 and heparin to come into close proximity.

Amino Acid Sequence↗

Structural studies in solution of the recombinant N-terminal pair of short consensus/complement repeat domains of complement receptor type 2 (CR2/CD21) and interactions with its ligand C3dg.

Human complement receptor type 2 (CR2, CD21) is a cell surface receptor that binds three distinct ligands (complement C3d, Epstein-Barr virus gp350/220, and the low-affinity IgE receptor CD23) via the N-terminal two of fifteen or sixteen short consensus/complement repeat (SCR) domains. Here, we report biophysical studies of the CR2 SCR 1-2 domain binding to its ligand C3dg. Two recombinant forms of CR2 containing the SCR 1-2 and SCR 1-15 domains were expressed in high yield in Pichia pastoris and baculovirus, respectively. Circular dichroism spectroscopy showed that CR2 SCR 1-2 receptor possessed a beta-sheet secondary structure with a melting temperature of 59 degrees C. Using surface plasmon resonance, kinetic parameters for the binding of either CR2 SCR 1-2 or the full-length SCR 1-15 form of CR2 showed that the affinity of binding to immobilized C3d is comparable for the SCR 1-15 compared to the SCR 1-2 form of CR2. Unexpectedly, both the association and dissociation rates for the SCR 1-15 form were slower than for the SCR 1-2 form. These data show that the SCR 1-2 domains account for the primary C3dg binding site of CR2 and that the additional SCR domains of full-length CR2 influence the ability of CR2 SCR 1-2 to interact with its ligand. Studies of the pH and ionic strength dependence of the interaction between SCR 1-2 and C3d by surface plasmon resonance showed that this is influenced by charged interactions, possibly involving the sole His residue in CR2 SCR 1-2. Sedimentation equilibrium studies of CR2 SCR 1-2 gave molecular weights of 17 000, in good agreement with its sequence-derived molecular weight to show that this was monomeric. Its sedimentation coefficient was determined to be 1.36 S. The complex with C3d gave molecular weights in 50 mM and 200 mM NaCl buffer that agreed closely with its sequence-derived molecular weight of 50 600 and showed that a 1:1 complex had been formed. Molecular graphics views of homology models for the separate CR2 SCR 1 and SCR 2 domains showed that both SCR domains exhibited a distribution of charged groups throughout its surface. The single His residue is located near a long eight-residue linker between the two SCR domains and may influence the linker conformation and the association of C3d and CR2 SCR 1-2 into their complex. Sedimentation modeling showed that the arrangement of the two SCR domains in CR2 SCR 1-2 is highly extended in solution.

Amino Acid Sequence↗

Abnormal secretion and function of recombinant human factor VII as the result of modification to a calcium binding site caused by a 15-base pair insertion in the F7 gene.

A case of a novel mutation in the F7 gene that results in factor VII coagulant activity (VII:c) of less than 1% and VII antigen (VII:Ag) levels of 10% is presented. DNA analysis revealed a homozygous 15-base pair (bp) in-frame insertion-type mutation at nucleotide 10554. This insertion consisted of a duplication of residues leucine (L)213 to aspartic acid (D)217 (leucine, serine, glutamic acid, histidine, and aspartic acid), probably arising by slipped mispairing between 2 copies of a direct repeat (GCGAGCACGAC) separated by 4 bp. Molecular graphic analyses showed that the insertion is located at the surface of the catalytic domain in an exposed loop stabilized by extensive salt-bridge and hydrogen bond formation at which the calcium binding site is located. The mutation probably interferes with protein folding during VII biosynthesis and/or diminishes functional activity through the loss of calcium binding. In vitro expression studies demonstrated that the levels of VII:Ag in lysates of cells transfected with wild type VII (VIIWT) were equivalent to those with mutant type VII (VIIMT), but the level of secreted VIIMT was 5% to 10% that of VIIWT. Pulse chase studies demonstrated that VIIMT did not accumulate intracellularly, and studies with inhibitors of protein degradation showed that recombinant VIIMT was partially degraded in the pre-Golgi compartment. Accordingly, only small amounts of VIIMT with undetectable procoagulant activity were secreted into conditioned media. These results demonstrate that a combination of secretion and functional defects is the mechanism whereby this insertion causes VII deficiency.

Base Pair Mismatch↗

Conformational changes during the assembly of factor B from its domains by (1)H NMR spectroscopy and molecular modelling: their relevance to the regulation of factor B activity.

Factor B is a key component of the alternative pathway of complement and is cleaved by factor D into the Ba and Bb fragments in the presence of activated C3 (C3b or C3(H(2)O)). The Ba fragment contains three short consensus/complement repeat domains, while the Bb fragment contains a von Willebrand factor type A (vWF-A) domain and a serine protease (SP) domain, all three of which are implicated in multisite contacts with C3. The upfield-shifted signals in the (1)H NMR spectra of factor B, the Ba and Bb fragments, and the vWF-A and SP domains were used as sensitive conformational probes of their structures. Temperature studies and pH titrations showed that the Ba fragment and the vWF-A and SP domains had conformationally mobile structures. The comparison of the NMR spectra of the SP domains of both factor B and factor D showed that the factor D linewidths were broader than those for factor B, which may result from a range of proteolytically inactive conformations of factor D in the absence of substrate. The NMR spectra from the separate vWF-A and SP domains in combination with that of the Ba fragment generally accounted for that of intact factor B, apart from the perturbation of an upfield-shifted signal from the Ba fragment. A new upfield-shifted signal was observed in the Bb fragment that was not detected in the spectra for the vWF-A or SP domains or intact factor B. Ring current calculations based on homology models or crystal structures predicted that buried hydrophobic methyl-aromatic interactions probably accounted for the upfield-shifted signals, with many arising from the N-terminal subdomain of the SP domain to which the C terminus of the vWF-A domain is directly linked. It was concluded that: (1) the conformation of the free SP domain is better ordered in solution than that of factor D; (2) the conformation of the Ba fragment is affected by its incorporation into factor B; and (3) the proximity of the vWF-A and SP domains within the Bb fragment leads to a conformational change in which conserved charged residues may be important. Allosteric structural rearrangements in the SP domain as the result of its interactions with the vWF-A domain or the Ba fragment provide an explanation of the regulation of the catalytic activity of factor B.

Allosteric Regulation↗

Structural models for carcinoembryonic antigen and its complex with the single-chain Fv antibody molecule MFE23.

MFE23 is a single chain Fv antibody that has a high affinity for carcinoembryonic antigen (CEA). A full homology model for CEA based on V-type, I-type and C2-type immunoglobulin folds, 28 oligosaccharides and the interdomain angle of CD2 was validated using solution scattering data. The superimposition of the intermolecular contacts observed in our recent crystal structure of MFE23 with the N-terminal domain of CEA permitted the MFE23-CEA complex to be modelled. Good surface and electrostatic complementarity and carbohydrate-unhindered access of MFE23 with the indentation between the first two CEA domains was observed. The model is supported by biochemical data and provides insight on the high affinity of MFE23 for CEA.

Amino Acid Sequence↗

Metal-dependent conformational changes in a recombinant vWF-A domain from human factor B: a solution study by circular dichroism, fourier transform infrared and (1)H NMR spectroscopy.

Factor B is a key component of the alternative pathway of complement and is cleaved by factor D into the Ba and Bb fragments when complexed with the activated form of C3, namely C3b. The Bb fragment contains a von Willebrand factor type A (vWF-A) domain, which is composed of an open twisted almost-parallel beta-sheet flanked on both sides by seven alpha-helices A1 to A7, with a metal coordination site at its active-site cleft. Homology modelling of this vWF-A domain shows that the metal-binding site was present. Two recombinant vWF-A domains (Gly229-Ile444 and Gly229-Gln448) were examined by circular dichroism and Fourier transform infrared spectroscopy and indicated a significant conformational transition in the presence and absence of Mg(2+). Two upfield-shifted signals in the (1)H NMR spectrum were used as sensitive probes of the vWF-A protein structure, one of which was assigned to a methyl group and demonstrated metal- and pH-dependent properties between two distinct conformations. Temperature denaturation studies followed by spectroscopy showed that metal-binding caused the vWF-A structure to become significantly more stable. Ring current calculations based on a homology model for the vWF-A structure correlated one upfield-shifted signal with a methyl group on the alpha-helices in the vWF-A structure and the other one with individual single protons. An allosteric property of the vWF-A domain has thus been identified, and its implications for factor B activation were examined. Since the vWF-A domain after alpha-helix A7 is connected by a short link to the catalytic serine protease domain in the Bb fragment, the identification of a metal-free and a more stable metal-bound conformation for the vWF-A domain implies that the vWF-A interaction with C3b may alter its Mg(2+)-bound coordination in such a way as to induce conformational changes that may regulate the proteolytic activity of factor B.

Allosteric Regulation↗

Crystal structure of the anti-(carcinoembryonic antigen) single-chain Fv antibody MFE-23 and a model for antigen binding based on intermolecular contacts.

MFE-23 is the first single-chain Fv antibody molecule to be used in patients and is used to target colorectal cancer through its high affinity for carcinoembryonic antigen (CEA), a cell-surface member of the immunoglobulin superfamily. MFE-23 contains an N-terminal variable heavy-chain domain joined by a (Gly(4)Ser)(3) linker to a variable light-chain (V(L)) domain (kappa chain) with an 11-residue C-terminal Myc-tag. Its crystal structure was determined at 2.4 A resolution by molecular replacement with an R(cryst) of 19.0%. Five of the six antigen-binding loops, L1, L2, L3, H1 and H2, conformed to known canonical structures. The sixth loop, H3, displayed a unique structure, with a beta-hairpin loop and a bifurcated apex characterized by a buried Thr residue. In the crystal lattice, two MFE-23 molecules were associated back-to-back in a manner not seen before. The antigen-binding site displayed a large acidic region located mainly within the H2 loop and a large hydrophobic region within the H3 loop. Even though this structure is unliganded within the crystal, there is an unusually large region of contact between the H1, H2 and H3 loops and the beta-sheet of the V(L) domain of an adjacent molecule (strands DEBA) as a result of intermolecular packing. These interactions exhibited remarkably high surface and electrostatic complementarity. Of seven MFE-23 residues predicted to make contact with antigen, five participated in these lattice contacts, and this model for antigen binding is consistent with previously reported site-specific mutagenesis of MFE-23 and its effect on CEA binding.

Amino Acid Sequence↗

Molecular characterisation and three-dimensional structural analysis of mutations in 21 unrelated families with inherited factor VII deficiency.

Factor VII (FVII) is a four-domain glycoprotein that plays a critical role in the initiation of blood coagulation. Hereditary deficiencies of this plasma protein results in a bleeding diathesis that varies in severity amongst affected patients. We have analysed the FVII gene in 27 patients with FVII deficiency from 21 unrelated families predominantly of Middle-Eastern extraction. A total of 19 different mutations were identified, of which 12 were novel and 7 had been previously reported. Nine of the 12 novel mutations were missense mutations located in the Gla domain (Ser23Pro), the second epidermal growth factor domain (Cys135Arg) and the catalytic serine protease domain (Arg247Cys, Arg277Cys, Ser282Arg, Pro303Thr, Ser363Ile, Trp364Cys, Trp364Phe), of which five are homozygous. Three novel splice mutations were identified in intron 1a (IVS1a+5), intron 2 (IVS2+1) and intron 6 (IVS6+1). Of the seven previously reported mutations, five were missense mutations of which three are homozygous (Gln100Arg, Arg152Gln, Arg304Gln, Cys310Phe and Thr359Met), one was a 17 bp deletion (10585del117bp) and one was a splice site mutation within intron 7 (IVS7+7). This study has significantly extended the current database of FVII mutations, including the number of known homozygous mutations. Conformational analyses of crystal structures for FVIIa and the FVIIa-tissue factor complex provided likely explanations for the effect of the missense mutations on FVIIa secretion or function. In particular, since 23 missense mutations were located to the serine protease domain, mostly to the region between the catalytic triad and the contact surface with tissue factor, this showed that the orientation of the serine protease domain relative to bound tissue factor in the complex is crucial for functional activity.

Adolescent↗

Identification and three-dimensional structural analysis of nine novel mutations in patients with prothrombin deficiency.

Prothrombin deficiency is an autosomal recessive disorder associated with a moderately severe bleeding tendency. In this study, 13 patients with prothrombin deficiency were screened for the presence of alterations in the prothrombin gene, and nine novel candidate mutations were identified. Of 11 patients with hypoprothrombinemia, ten are homozygous for five mutations and one patient is a compound heterozygote. The two patients with dysprothrombinemia are homozygous for two mutations. Eight of nine mutations are missense ones associated with single amino acid substitutions in the propeptide (Arg-1Gln, Arg-2Trp), the kringle-1 (Asp118Try) and kringle-2 (Arg220Cys) domains and the catalytic serine protease domain (Gly330Ser, Ser354Arg. Arg382His and Arg538Cys). The ninth mutation is an in-frame deletion of 3 bp that results in the omission of one amino acid (del Lys 301/302). The combination of these missense mutations with crystal structures for alpha-thrombin and the prothrombin fragments 1 and 2 resulted in new insight into the function of alpha-thrombin. The hypoprothrombinemia mutations were inferred to affect either the cleavage of the propeptide from the Gla domain, the stability of the kringle-1 and -2 domains, or the close association of the A and B chains of the serine protease domain. The dysprothrombinemia mutations were inferred to directly affect catalytic function through their location at the active site crevice or exosite 1 within the serine protease domain.

Adolescent↗

Identification of type 2 von Willebrand disease in previously diagnosed type 1 patients: a reappraisal using phenotypes, genotypes and molecular modelling.

In order to investigate the possibility that qualitative type 2 defects in von Willebrand factor (VWF) occurred in patients previously diagnosed with quantitative type 1 von Willebrand disease (VWD), the phenotypes and genotypes were reanalysed in 30 patients who exhibited discrepant VWF activity/VWF:Ag ratios of less than 0.7. The capacity of VWF to bind to glycoprotein Ib (GpIb) was reassessed using the ristocetin co-factor activity (VWF:RiCo) assay compared to an in-house and a commercial ELISA assay (based on a mAb directed against the GpIb binding site on VWF). This was supplemented by multimeric analysis and the amplification and sequencing of a 936 bp fragment of exon 28 of the VWF gene with the aim of identifying mutations in the A1 domain. On reappraisal, using the VWF:RiCo assay all patients demonstrated a disproportionately reduced VWF:RiCo/VWF:Ag ratio, indicative of a qualitative defect, while abnormal ratios were detected in only seven kindreds using the in-house ELISA assay and in only one kindred with the commercial ELISA assay. Eight single amino acid substitutions were found in nine kindreds, four of which were novel candidate VWF mutations and four previously described in association with type 2 VWD. In agreement with the phenotype, the novel VWF mutations were located in the VWF-A1 crystal structure at positions that corresponded to potential type 2M defects. This study underlines the difficulties of correct diagnosis of the subtype of VWD and emphasises the importance of using sensitive phenotypic assays, the relevance of the VWF:RiCo/ VWF:Ag ratio, multimeric analysis and molecular modelling analysis.

Amino Acid Substitution↗

Identification of the C3b binding site in a recombinant vWF-A domain of complement factor B by surface-enhanced laser desorption-ionisation affinity mass spectrometry and homology modelling: implications for the activity of factor B.

Factor B is a key component of the alternative pathway of the complement system. During complement activation, factor B complexed with activated C3 is cleaved into the Ba and Bb fragments by the protease factor D to form the C3 convertase from the complex between C3b and Bb. The Ba fragment contains three short consensus/complement repeat (SCR) domains, and the Bb fragment contains a von Willebrand factor type A (vWF-A) domain and a serine protease (SP) domain. Surface-enhanced laser desorption-ionization affinity mass spectrometry (SELDIAMS) was used to investigate the reaction of factor B with immobilised activated C3(NH3) in the presence of Mg(2+). A recombinant vWF-A domain (residues G229-Q448), the native Ba and Bb fragments and native factor B all demonstrated specific interactions with C3(NH3), while no interactions were detected using bovine serum albumin as a control. A mass analysis of the proteolysis of the vWF-A domain when this was bound to immobilised C3(NH3) identified two peptides (residues G229-K265 and T355-R381) that were involved with vWF-A binding to C3(NH3). A homology model for the vWF-A domain was constructed using the vWF-A crystal structure in complement receptor type 3. Comparisons with five different vWF-A crystal structures showed that large surface insertions were present close to the carboxyl and amino edges of the central beta-sheet of the factor B vWF-A structure. The peptides G229-K265 and T355-R381 corresponded to the two sides of the active site cleft at the carboxyl edge of the vWF-A structure. The vWF-A connections with the SCR and SP domains were close to the amino edge of this vWF-A beta-sheet, and shows that the vWF-A domain can be involved in both C3b binding and the regulation of factor B activity. These results show that (i) a major function of the vWF-A domain is to bind to activated C3 during the formation of the C3 convertase, which it does at its active site cleft; and that (ii) SELDIAMS provides an efficient means of identifying residues involved in protein-protein interactions.

Amino Acid Sequence↗

Production and functional activity of a recombinant von Willebrand factor-A domain from human complement factor B.

Factor B is a five-domain 90 kDa serine protease proenzyme which is part of the human serum complement system. It binds to other complement proteins C3b and properdin, and is activated by the protease factor D. The fourth domain of factor B is homologous to the type A domain of von Willebrand Factor (vWF-A). A full-length human factor B cDNA clone was used to amplify the region encoding the vWF-A domain (amino acids 229-444 of factor B). A fusion protein expression system was then used to generate it in high yield in Escherichia coli, where thrombin cleavage was used to separate the vWF-A domain from its fusion protein partner. A second vWF-A domain with improved stability and solubility was created using a Cys(267)-->Ser mutation and a four-residue C-terminal extension of the first vWF-A domain. The recombinant domains were investigated by analytical gel filtration, sucrose density centrifugation and analytical ultracentrifugation, in order to show that both domains were monomeric and possessed compact structures that were consistent with known vWF-A crystal structures. This expression system and its characterization permitted the first investigation of the function of the isolated vWF-A domain. It was able to inhibit substantially the binding of (125)I-labelled factor B to immobilized C3b. This demonstrated both the presence of a C3b binding site in this portion of factor B and a ligand-binding property of the vWF-A domain. The site at which factor D cleaves factor B is close to the N-terminus of both recombinant vWF-A domains. Factor D was shown to cleave the vWF-A domain in the presence or absence of C3b, whereas the cleavage of intact factor B under the same conditions occurs only in the presence of C3b.

Amino Acid Sequence↗

The Fab and Fc fragments of IgA1 exhibit a different arrangement from that in IgG: a study by X-ray and neutron solution scattering and homology modelling.

Human immunoglobulin A (IgA) is an abundant antibody that mediates immune protection at mucosal surfaces as well as in plasma. The IgA1 isotype contains two four-domain Fab fragments and a four-domain Fc fragment analogous to that in immunoglobulin G (IgG), linked by a glycosylated hinge region made up of 23 amino acid residues from each of the heavy chains. IgA1 also has two 18 residue tailpieces at the C terminus of each heavy chain in the Fc fragment. X-ray scattering using H2O buffers and neutron scattering using 100 % 2H2O buffers were performed on monomeric IgA1 and a recombinant IgA1 that lacks the tailpiece (PTerm455). The radii of gyration RG from Guinier analyses were similar at 6.11-6.20 nm for IgA1 and 5.84-6.16 nm for PTerm455, and their cross-sectional radii of gyration RXS were also similar. The similarity of the RG and RXS values suggests that the tailpiece of IgA1 is not extended outwards in solution. The IgA1 RG values are higher than those for IgG, and the distance distribution function P(r) showed two distinct peaks, whereas a single peak was observed for IgG. Both results show that the hinge of IgA1 results in an extended Fab and Fc arrangement that is different from that in IgG. Automated curve-fit searches constrained by homology models for the Fab and Fc fragments were used to model the experimental IgA1 scattering curves. A translational search to optimise the relative arrangement of the Fab and Fc fragments held in a fixed orientation resembling that in IgG was not successful in fitting the scattering data. A new molecular dynamics curve-fit search method generated IgA1 hinge structures to which the Fab and Fc fragments could be connected in any orientation. A search based on these identified a limited family of IgA1 structures that gave good curve fits to the experimental data. These contained extended hinges of length about 7 nm that positioned the Fab-to-Fab centre-to-centre separation 17 nm apart while keeping the corresponding Fab-to-Fc separation at 9 nm. The resulting extended T-shaped IgA1 structures are distinct from IgG structures previously determined by scattering and crystallography which have Fab-to-Fab and Fab-to-Fc centre-to-centre separations of 7-9 nm and 6-8 nm, respectively. It was concluded that the IgA1 hinge is structurally distinct from that in IgG, and this results in a markedly different antibody structure that may account for a unique immune role of monomeric IgA1 in plasma and mucosa.

Amino Acid Sequence↗