Search PubMed⌕ Search

Biomedical subjects

S Aiba

Publications and source records attributed to S Aiba.

At least 145 records · Page 8Linked to original sources

Laminates composed of polypeptides and elastomers as a burn wound covering. Physicochemical properties.

Laminates of synthetic polypeptides and elastomers, have been prepared, characterized and evaluated in terms of their application as a burn wound covering. It was found that the oxidation of L-methionine(Met)-containing polypeptide films by hydrogen peroxide led to an increase in the water vapour transmission rates (WVTR's) of the films. Elastomeric films had high WVTR's and good tensile properties for wound covering. The laminates composed of oxidized Met-containing copolypeptides and polyurethane had high WVTR's (790-1050 g X m-2 X day-1): for example, the laminate composed of an oxidized Met and N epsilon-benzyloxycarbonyl-L-lysine containing copolypeptide and polyurethane had high WVTR (960 g X m- X d-1) and large elongation (556%), also the cohesion between the two layers of this laminate was strong even after autoclaving. These characteristics seem to be very attractive for the possible application of laminates to wound covering. In addition the method of measuring WVTR is discussed.

Amino Acids↗

Effect of in vitro DNA rearrangement in the NH2-terminal region of the penicillinase gene from Bacillus licheniformis on the mode of expression in Bacillus subtilis.

We have constructed secretion vector plasmids that have unique BglII sites within or near the signal sequence of Bacillus licheniformis penicillinase, and have also constructed penicillinase cartridges that lack either one, two or three of the processing sites for the membrane-bound, exo-large and exo-small enzymes. Each of these penicillinase cartridges was cloned on secretion vectors in Bacillus subtilis, and enzyme production was examined. The presence of both the signal sequence and the three host-specific processing sites on the secretion vector was required for an effective expression of the enzyme in B. subtilis. The presence of any of the processing sites on the cartridge reduced the accumulation of penicillinase in the culture medium. When a vector plasmid lacking part of the hydrophobic region of the signal sequence and lacking the three processing sites was used, total penicillinase production decreased and enzyme accumulation in the medium was extremely low, despite the complete or incomplete presence of the processing sites on the cartridge. Molecular mass determination of these extracellular penicillinases suggested the existence of a new cleavage site for the enzyme.

Amino Acid Sequence↗

Isolation of streptomycin-nonproducing mutants deficient in biosynthesis of the streptidine moiety or linkage between streptidine 6-phosphate and dihydrostreptose.

Eight streptidine idiotrophic mutants (SD20, SD81, SD141, SD189, SD245, SD261, SD263, and SD274) which required streptidine to produce streptomycin were derived from Streptomyces griseus ATCC 10137 by UV mutagenesis. By both the characterization of intermediates accumulated by the idiotrophs and the assay of enzymes involved in streptidine biosynthesis, the biochemical lesions of the mutants were deduced as follows: SD20 and SD263, transamination; SD81, SD261, and SD274, phosphorylation; SD141, transamidination; SD189, dehydrogenation; SD245, linkage between streptidine 6-phosphate and dihydrostreptose. An accumulation of streptidine 6-phosphate was found in SD245 to impair its aminotransferase activity. This finding suggests that aminotransferase activity might have been negatively controlled by the end product, streptidine 6-phosphate, of the streptidine biosynthetic pathway.

Amidinotransferases↗

Molecular cloning of tetracycline resistance genes from Streptomyces rimosus in Streptomyces griseus and characterization of the cloned genes.

Two tetracycline resistance genes of Streptomyces rimosus, an oxytetracycline producer, were cloned in Streptomyces griseus by using pOA15 as a vector plasmid. Expression of the cloned genes, designated as tetA and tetB was inducible in S. griseus as well as in the donor strain. The tetracycline resistance directed by tetA and tetB was characterized by examining the uptake of tetracycline and in vitro polyphenylalanine synthesis by the sensitive host and transformants with the resultant hybrid plasmids. Polyphenylalanine synthesis with crude ribosomes and the S150 fraction from S. griseus carrying the tetA plasmid was resistant to tetracycline, and, by a cross-test of ribosomes and S150 fraction coming from both the sensitive host and the resistant transformant, the resistance directed by tetA was revealed to reside mainly in crude ribosomes and slightly in the S150 fraction. However, the resistance in the crude ribosomes disappeared when they were washed with 1 M ammonium chloride. These results suggest that tetA specified the tetracycline resistance of the machinery for protein synthesis not through ribosomal subunits, but via an unidentified cytoplasmic factor. In contrast, S. griseus carrying the tetB plasmid accumulated less intracellular tetracycline than did the host, and the protein synthesis by reconstituting the ribosomes and S150 fraction was sensitive to the drug. Therefore, it is conceivable that tetB coded a tetracycline resistance determinant responsible for the reduced accumulation of tetracycline.

Biological Transport↗

Nucleotide sequence of the Bacillus stearothermophilus alpha-amylase gene.

The nucleotide sequence of the Bacillus stearothermophilus alpha-amylase gene and its flanking regions was determined. An open reading frame was found, comprising a total of 1,647 base pairs (549 amino acids) and starting from a GUG codon as methionine. It was shown by NH2-terminal amino acid sequence analysis that the extracellular amylase consisted of 515 amino acid residues, which corresponded to a molecular weight of 58,779. Thus the NH2-terminal portion of the gene encodes 34 amino acid residues as a signal peptide. The amino acid sequence deduced from the alpha-amylase gene was fairly homologous (61%) with that of another thermostable amylase from Bacillus amyloliquefaciens.

Amino Acid Sequence↗

Nucleotide sequence and promoter region for the neutral protease gene from Bacillus stearothermophilus.

The thermostable neutral protease gene nprT of Bacillus stearothermophilus was sequenced. The DNA sequence revealed only one large open reading frame, composed of 1,644 bases and 548 amino acid residues. A Shine-Dalgarno sequence was found 9 bases upstream from the translation start site (ATG), and the deduced amino acid sequence contained a signal sequence in its amino-terminal region. The sequence of the first 14 amino acids of purified extracellular protease completely matched that deduced from the DNA sequence starting at GTC (Val), 687 bases (229 amino acids) downstream from ATG. This suggests that the protease is translated as a longer polypeptide. The amino acid sequence of the extracellular form of this protease (319 amino acids) was highly homologous to that of the thermostable neutral protease from Bacillus thermoproteolyticus but less homologous to the thermolabile neutral protease from Bacillus subtilis. A promoter region determined by S1 nuclease mapping (TTTTCC for the -35 region and TATTTT for the -10 region) was different from the conserved promoter sequences recognized by the known or factors in bacilli. However, it was very homologous to the promoter sequence of the spo0B gene from B. subtilis. The guanine-plus-cytosine content of the coding region of the nprT gene was 58 mol%, while that of the third letter of the codons was much higher (72 mol%).

Amino Acid Sequence↗

Self-cloning in Streptomyces griseus of an str gene cluster for streptomycin biosynthesis and streptomycin resistance.

An str gene cluster containing at least four genes (strR, strA, strB, and strC) involved in streptomycin biosynthesis or streptomycin resistance or both was self-cloned in Streptomyces griseus by using plasmid pOA154. The strA gene was verified to encode streptomycin 6-phosphotransferase, a streptomycin resistance factor in S. griseus, by examining the gene product expressed in Escherichia coli. The other three genes were determined by complementation tests with streptomycin-nonproducing mutants whose biochemical lesions were clearly identified. strR complemented streptomycin-sensitive mutant SM196 which exhibited impaired activity of both streptomycin 6-phosphotransferase and amidinotransferase (one of the streptomycin biosynthetic enzymes) due to a regulatory mutation; strB complemented strain SD141, which was specifically deficient in amidinotransferase; and strC complemented strain SD245, which was deficient in linkage between streptidine 6-phosphate and dihydrostreptose. By deletion analysis of plasmids with appropriate restriction endonucleases, the order of the four genes was determined to be strR-strA-strB-strC. Transformation of S. griseus with plasmids carrying both strR and strB genes enhanced amidinotransferase activity in the transformed cells. Based on the gene dosage effect and the biological characteristics of the mutants complemented by strR and strB, it was concluded that strB encodes amidinotransferase and strR encodes a positive effector required for the full expression of strA and strB genes. Furthermore, it was found that amplification of a specific 0.7-kilobase region of the cloned DNA on a plasmid inhibited streptomycin biosynthesis of the transformants. This DNA region might contain a regulatory apparatus that participates in the control of streptomycin biosynthesis.

Amidinotransferases↗

[Significance of CEA in gastric and colorectal cancer].

The determination of serum CEA (Sandwich method) and CEA staining (PAP method) of excised specimens were performed in patients with gastric or colorectal cancer, and the biological characteristics of each cancer and the factors to increase serum CEA were studied with the following results: As colonic cancer has strong CEA productivity, serum CEA can be useful for the detection of cancer, and especially effective for the postoperative observation. Gastric cancer has weak CEA productivity, and serum CEA is not so useful in the detection of cancer and the judgement of resectability. The CEA positive rate of tissue with CEA staining was 80% in gastric cancer, 100% in colonic cancer, and were nearly equal to the CEA positive rate of serum in the group of terminal stage. In the mode of CEA staining of cancerous cells, IV type was observed most frequently in gastric cancer, and I type in colonic cancer. Among the resected cases showing more than 7ng/ml serum CEA, differentiated type, lymph node metastasis (+), the degree of tissue staining with CEA staining, the mode of cell staining O or I type in gastric cancer and I type in colonic cancer were observed in common.

Aged↗

L-tryptophan 2,3-dioxygenase of a moderate thermophile, Bacillus brevis. Purification, properties and a substrate-mediated stabilization of the quaternary structure.

L-Tryptophan 2,3-dioxygenase (L-tryptophan: oxygen 2,3-oxidoreductase ( decycling ), EC 1.13.11.11) from Bacillus brevis, a moderately thermophilic bacteria, was purified to apparent homogeneity. The enzyme had a molecular weight of 110 000 and consisted of four subunits of equal molecular size. The enzyme exhibited the typical absorption spectra of a protohemoprotein . The amino acid composition and catalytic properties of the thermophilic enzyme were almost similar to those of its mesophilic counterpart from Pseudomonas acidovorans. However, the stabilities of the enzyme differed markedly between the two. The thermophilic enzyme was more resistant to heat and several chemical denaturants. The addition of L-tryptophan protected the enzyme from heat- and SDS- denaturations , and the tryptophan-mediated stabilization was more evident for the thermophilic enzyme. The effect of L-tryptophan on the stabilization of the thermophilic enzyme was more effective in preventing the dissociation of the tetrameric form of the enzyme (i.e. stabilizing it) in the case of the native, as compared to the mesophilic enzyme.

Amino Acids↗

Two replication determinants of an antibiotic-resistance plasmid, pTB19, from a thermophilic bacillus.

Two different replication determinants were found on an antibiotic resistance plasmid, pTB19, from a thermophilic bacillus. One replication determinant (designated RepA) was functional only in Bacillus subtilis, whereas the other (designated RepB) functioned in both B. subtilis and Bacillus stearothermophilus. A deletion plasmid, pTB90, carrying the RepB derived from pTB19 coincidentally contained the specific 1.0 MDal EcoRI fragment of a cryptic plasmid pBSO2 from B. stearothermophilus. The presence of this 1.0 MDal EcoRI fragment in various deletion plasmids from pTB90 increased transformation frequencies for B. stearothermophilus 10(3) to 10(4) times and lowered plasmid copy numbers in the host strain to about one-tenth of those found for plasmids lacking this fragment.

Bacillus↗

HLA-DR antigen expression on the keratinocyte surface in dermatoses characterized by lymphocytic exocytosis (e.g. pityriasis rosea).

We have investigated the immunoperoxidase staining pattern of the epidermis in several dermatoses characterized by exocytosis of mononuclear cells into the epidermis. We found that HLA-DR antigens showed an intercellular distribution in localized areas of the epidermis in nine of ten cases of pityriasis rosea, and in all four cases of spontaneously regressing flat warts, two cases of pityriasis lichenoides chronica, two of Schamberg's disease, and one case of lichen striatus. Lichen planus and mycosis fungoides cases were used as positive controls. OKT6 antigen was recognized only on the dendritic cells of the epidermis in all these cases. Judging from the distribution of Langerhans cells, the epidermal intercellular HLA-DR antigen seems to be expressed on the keratinocytes in such diseases, and this feature was confirmed by immunoelectron microscopy. These findings support the hypothesis that the expression of HLA-DR antigen on keratinocytes in these dermatoses is linked to cellular immune reactions involving the epidermis.

Cell Membrane↗

Dynamic changes in epidermal Ia-positive cells in allergic contact sensitivity reactions in mice.

In mice sensitized with trinitrochlorobenzene, serial changes in epidermal Ia-positive cells were studied at various times after challenge. Until 3 days post-challenge, the Ia-positive cells consisted only of dendritic Langerhans cells; their number was decreased but they were significantly enlarged, with extending dendrites. Some Langerhans cells were also found surrounding a hair follicle, extending their dendrites toward the follicle like the spokes of a wheel. From 3 to 9 days after challenge, keratinocytes also began to express Ia antigens in the epidermis in addition to Langerhans cells, whose size diminished. This suggests that there are two phases in the response of the epidermal Ia antigens in contact sensitivity reactions, i.e. an early phase in which enlarged Langerhans cells are the only Ia-positive cells in the epidermis, and a late phase in which keratinocytes take over as the major Ia-positive cells, while Langerhans cells resume their original size. Ia antigen expression on keratinocytes in this late phase probably plays a crucial role in completely eliminating allergens deposited on the keratinocytes.

Animals↗

Characterization of Saccharomycopsis lipolytica mutants that express temperature-sensitive synthesis of isocitrate lyase.

Four mutants specifically deficient in the activity of isocitrate lyase were independently isolated in the alkane yeast Saccharomycopsis lipolytica. Genetic analysis by means of protoplast fusion and mitotic haploidization revealed that the mutations were recessive and non-complementary at a single genetic locus, icl. icl is a structural gene for isocitrate lyase, because some revertants from icl-1 and icl-3 mutants produced thermolabile isocitrate lyase in comparison with the wild-type enzyme, and also because the gene dosage effect was observed on the specific activity of isocitrate lyase in icl+/icl-1 and icl+/icl-3 heterozygotes. The icl-3 mutation also gave rise to temperature-sensitive revertants that could grow on acetate at 23 degrees C but not at 33 degrees C, exhibiting temperature-sensitive synthesis as well as thermostable activity of isocitrate lyase. Studies on purified isocitrate lyase showed that this enzyme is tetrameric and that the enzyme synthesized at 23 degrees C by a temperature-sensitive synthesis mutant was indistinguishable from the wild-type enzyme with respect to the subunit molecular weight (59,000), the isoelectric pH (5.3), the thermostability, and the Km value for threo-Ds-isocitrate (0.2 mM). When induced by acetate at 33 degrees C, the temperature-sensitive synthesis mutant did not express isocitrate lyase activity but did synthesize polypeptides whose electrophoretic mobilities were equal to that of the purified mutant enzyme. Hence, the temperature-sensitive mutation assumed in the structural gene for isocitrate lyase might have prevented the maturation of the polypeptide chains synthesized at the restrictive temperature.

Acetates↗

Enzymatic and nucleotide sequence studies of a kanamycin-inactivating enzyme encoded by a plasmid from thermophilic bacilli in comparison with that encoded by plasmid pUB110.

The product of a kanamycin resistance gene encoded by plasmid pTB913 isolated from a thermophilic bacillus was identified as a kanamycin nucleotidyltransferase which is similar to that encoded by plasmid pUB110 from a mesophile, Staphylococcus aureus. The enzyme encoded by pTB913 was more thermostable than that encoded by pUB110. In view of a close resemblance of restriction endonuclease cleavage maps around the BglII site in the structural genes of both enzymes, ca. 1,200 base pairs were sequenced, followed by amino-terminal amino acid sequencing of the enzyme. The two nucleotide sequences were found to be identical to each other except for only one base in the midst of the structural gene. Each structural gene, initiating from a GUG codon as methionine, was composed of 759 base pairs and 253 amino acid residues (molecular weight, ca. 29,000). The sole difference was transversion from a cytosine (pUB110) to an adenine (pTB913) at a position + 389, counting the first base of the initiation codon as + 1. That is, a threonine at position 130 for the pUB110-coded kanamycin nucleotidyltransferase was replaced by a lysine for the pTB913-coded enzyme. The difference in thermostability between the two enzymes caused by a single amino acid replacement is discussed in light of electrostatic effects.

Amino Acid Sequence↗