Biomedical subjects

Richard A Vaia

Publications and source records attributed to Richard A Vaia.

7 recordsLinked to original sources

PubMed2006

Dynamics of alkyl ammonium intercalants within organically modified montmorillonite: Dielectric relaxation and ionic conductivity.

The low-frequency (0.01 Hz-10 MHz) dynamic characteristics of alkyl quaternary ammonium exchanged montmorillonite (SC20A) were investigated to determine the correlation between temperature-dependent changes in the interlayer structure and collective mobility of the surfactant. From 25 to 165 degrees C, SC20A exhibits two interlayer transitions, one ascribed to the melting of the intercalated alkyl chains of the surfactant (20-40 degrees C) and another associated with an abrupt decrease in the interlayer's coefficient of thermal expansion (100 degrees C). For this temperature range, the excess surfactant and residual electrolytes present in commercially manufactured SC20A enhance the direct current conductivity and increase low-frequency space-charge polarization, which is believed to occur across percolation paths established by the surfaces of the SC20A crystallites. In contrast, a higher-frequency relaxation, which was less sensitive to process history and impurity content, is ascribed to relaxation within the interlayer at the surfactant-aluminosilicate interface electrostatic couple. The temperature dependence of these dielectric relaxations indicated a drastic increase in mobility as the interlayer organic phase transitions from static and glasslike into molten and mobile. Overall, SC20A displayed features of alternating current universality, including time-temperature superposition, common in other types of disordered ion-conducting media. The presence of long-range transport and its sensitivity to low amounts of impurities imply that from a dynamic perspective the local environment of the surfactants are substantially diverse and a minority fraction, such as at the edge of the crystallite (gallery and aluminosilicate layer), may dominate the lower-frequency dielectric response.

Journal Article↗

PubMed2006

Rearrangements in an alkylthiolate self-assembled monolayer using electrostatic interactions between nanoscale asperity and organomercaptan molecules.

Chemically induced rearrangements of amphifunctional molecules have been demonstrated using strong nonuniform electric fields (10(8)-10(10) V m(-1)) induced in the vicinity of nanoscale asperities. Electrostatic interactions utilizing these rearrangements of alkylthiolates assembled on Au(111) result in the nanopatterning of raised nanostructure (1.5-9 nm high, 15-100 nm wide) arrays on a second time scale by manipulating an atomic force microscope (AFM) tip above the monolayer. It is suspected that, as a result of the oxidative cleavage initiated by a weak bias of the tip, the S end of the alkylthiolate chain carrying a sulfenium cation is attracted to the (lifting) tip, forming bi- and higher-layer structures in the vicinity of the tip apex. Stabilization of the multiple-layered structures is accomplished via mutual attraction and entanglement of hydrocarbon chains. The rearrangements suggest a novel and general approach for nanoscale architecture in self-assembled systems.

Journal Article↗

PubMed2005

High-resolution electron microscopy of montmorillonite and montmorillonite/epoxy nanocomposites.

With the use of high-resolution transmission electron microscopy the structure and morphology of montmorillonite (MMT), a material of current interest for use in polymer nanocomposites, was characterized. Using both imaging theory and experiment, the procedures needed to generate lattice images from MMT were established. These procedures involve careful control of the microscope's objective lens defocus to maximize contrast from features of a certain size, as well as limiting the total dose of electrons received by the sample. Direct images of the MMT lattice were obtained from neat Na+ MMT, organically modified MMT, and organically modified MMT/epoxy nanocomposites. The degree of crystallinity and turbostratic disorder were characterized using electron diffraction and high-resolution electron microscopy (HREM). Also, the extent of the MMT sheets to bend when processed into an epoxy matrix was directly visualized. A minimum radius of curvature tolerable for a single MMT sheet during bending deformation was estimated to be 15 nm, and from this value a critical failure strain of 0.033 was calculated. HREM can be used to improve the understanding of the structure of polymer nanocomposites at the nanometer-length scale.

Journal Article↗

PubMed2005

Metal nanoshell assembly on a virus bioscaffold.

Chilo iridescent virus is demonstrated as a useful core substrate in the fabrication of metallodielectric, plasmonic nanostructures. A gold shell is assembled around the wild-type viral core by attaching small, 2-5-nm gold nanoparticles to the virus surface by means of the chemical functionality found inherently on the surface of the proteinaceous viral capsid. The density of these nucleation sites was maximized by reducing the repulsive forces between the gold particles through electrolyte addition. These gold nanoparticles then act as nucleation sites for the electroless deposition of gold ions from solution around the biotemplate. The optical extinction spectra of the metalloviral complex is in quantitative agreement with Mie scattering theory. Overall, the utilization of a native virus and the inherent chemical functionality of the capsid afford the ability to grow and harvest biotemplates for metallodielectric nanoshells in large quantities, potentially providing cores with a narrower size distribution and smaller diameters (below 80 nm) than for currently used silica.

Capsid↗

PubMed2004

Degenerate two-photon-absorption spectral studies of highly two-photon active organic chromophores.

Degenerate two-photon absorption (TPA) spectral properties of five AFX chromophore solutions have been studied using a single and spectrally dispersed sub-picosecond white-light continuum beam. In a specially designed optical configuration, optical pathways inside the sample solution for different spectral components of the focused continuum beam were spatially separated from each other. Thus, the nondegenerate TPA processes coming from different spectral components can be eliminated, and the direct nonlinear absorption spectrum attributed to degenerate TPA processes can be readily obtained. Using this new technique, the complete TPA spectra for these five highly two-photon-active compounds (AF-380, AF-350, AF-295, AF-270, and AF-50) were obtained in the spectral range from 600 to 950 nm on an absolute scale of TPA cross section. The relationship between the molecular structures and their TPA spectral behaviors are discussed. In general the measured TPA spectra are not identical with the linear absorption spectra on the scale of absorbed photon(s) energy. Moreover, for some sample (such as AF-380), the TPA spectrum is totally different from the linear spectrum, which implies the difference of molecular transition pathways and selection rules for one- and two-photon excitation processes. At high excitation intensity levels (>or=15 GW/cm(2)), the saturation behavior of TPA transition can be observed obviously in AF-350 and AF-380 solutions that exhibit much higher nonlinear absorptivity than the other chromophores investigated.

Journal Article↗

PubMed2004

Remotely actuated polymer nanocomposites--stress-recovery of carbon-nanotube-filled thermoplastic elastomers.

Stimuli-responsive (active) materials undergo large-scale shape or property changes in response to an external stimulus such as stress, temperature, light or pH. Technological uses range from durable, shape-recovery eye-glass frames, to temperature-sensitive switches, to the generation of stress to induce mechanical motion. Here, we demonstrate that the uniform dispersion of 1-5 vol.% of carbon nanotubes in a thermoplastic elastomer yields nanocomposites that can store and subsequently release, through remote means, up to 50% more recovery stress than the pristine resin. The anisotropic nanotubes increase the rubbery modulus by a factor of 2 to 5 (for 1-5 vol.%) and improve shape fixity by enhancing strain-induced crystallization. Non-radiative decay of infrared photons absorbed by the nanotubes raises the internal temperature, melting strain-induced polymer crystallites (which act as physical crosslinks that secure the deformed shape) and remotely trigger the release of the stored strain energy. Comparable effects occur for electrically induced actuation associated with Joule heating of the matrix when a current is passed through the conductive percolative network of the nanotubes within the resin. This unique combination of properties, directly arising from the nanocomposite morphology, demonstrates new opportunities for the design and fabrication of stimuli-responsive polymers, which are otherwise not available in one material system.

Carbon↗

PubMed2003

Electrostatic nanolithography in polymers using atomic force microscopy.

The past decade has witnessed an explosion of techniques used to pattern polymers on the nano (1-100 nm) and submicrometre (100-1,000 nm) scale, driven by the extensive versatility of polymers for diverse applications, such as molecular electronics, data storage, optoelectronics, displays, sacrificial templates and all forms of sensors. Conceptually, most of the patterning techniques, including microcontact printing (soft lithography), photolithography, electron-beam lithography, block-copolymer templating and dip-pen lithography, are based on the spatially selective removal or formation/deposition of polymer. Here, we demonstrate an alternative and novel lithography technique--electrostatic nanolithography using atomic force microscopy--that generates features by mass transport of polymer within an initially uniform, planar film without chemical crosslinking, substantial polymer degradation or ablation. The combination of localized softening of attolitres (10(2)-10(5) nm3) of polymer by Joule heating, extremely non-uniform electric field gradients to polarize and manipulate the soften polymer, and single-step process methodology using conventional atomic force microscopy (AFM) equipment, establishes a new paradigm for polymer nanolithography, allowing rapid (of the order of milliseconds) creation of raised (or depressed) features without external heating of a polymer film or AFM tip-film contact.

Microscopy, Atomic Force↗