Search PubMed⌕ Search

Biomedical subjects

Louis Ricard

Publications and source records attributed to Louis Ricard.

At least 37 records · Page 2Linked to original sources
PubMed2004

Group 11 metal complexes of SPS-based pincer ligands: syntheses, X-ray structures and reactivity.

New group 11 d10 (Cu, Au) metal complexes with SPS pincer ligand were synthesized. Insoluble dimeric or oligomeric complexes [(SP(R)S)Cu](n) (R = Bu:4, Me:5) were readily cleaved by several two-electron donor ligands (phosphines, isocyanides, pyridine) to yield a range of new complexes (6-13). X-Ray crystal studies were performed on complexes 7, 8, 9, 11, which revealed distorted tetrahedral geometries and proved once again the flexibility of the SPS ligand, which can accommodate square planar, tetrahedral, octahedral and trigonal bipyramidal geometries. A dimeric gold species with an Au-Au interaction 16 was also synthesized. This dimer could be cleaved with two electron donor ligand (PPh(3):17, RNC: 18). Reactivity of complex 11 with ethyl diazoacetate yielded new lambda5-phosphinine 14.

Journal Article↗
PubMed2004

Formal synthesis of (+/-)-guanacastepene A: a tandem ring-closing metathesis approach.

A concise route to a key intermediate in the total synthesis of guanacastepene A is described. The main features include the simultaneous construction of the seven- and six-membered rings, using a tandem ring-closing metathesis and a stereoselective introduction of the oxygenated function at the C5 position. [reaction: see text]

Anti-Bacterial Agents↗
PubMed2003

Structure and reactivity of homoleptic samarium(II) and thulium(II) phospholyl complexes.

Potassium 2,5-di-tert-butyl-3,4-dimethylphospholide K(dtp) (9) was synthesised in 45 % yield from commercially available starting materials by using zirconacyclopentadiene chemistry. Reaction of the K salt of this bulky anion and of the previously described potassium 2,5-bis(trimethylsilyl)-3,4-dimethylphospholide K(dsp) (8) with SmI(2) in diethyl ether afforded the homoleptic samarium(II) complexes 7 and 6, respectively, whose solid-state structures, [[Sm(dtp)(2)](2)] (7 a) and [[Sm(dsp)(2)](2)] (6 a), are dimeric owing to coordination of the phosphorus lone pairs to samarium, as shown by X-ray crystallography. Reaction of 8 with TmI(2) in diethyl ether afforded [Tm(dsp)(2)(Et(2)O)], which could not be desolvated without decomposition. In contrast, the coordinated ether group of the solvate [Tm(dtp)(2)(Et(2)O)], obtained from 9 and TmI(2), could easily be removed by evaporation of the solvent and extraction with pentane at room temperature, and the monomer [Tm(dtp)(2)] (5) could be isolated and was characterised by X-ray crystallography. Presumably, steric crowding in 5 is too high for dimerisation to occur. Compound 5, the first Tm(II) homoleptic sandwich complex, is remarkably stable at room temperature in solution and did not noticeably react with nitrogen, in sharp contrast with other thulium(II) species. As expected, 5, 6 and 7 all reacted with azobenzene to give the trivalent complexes [Tm(dtp)(2)(N(2)Ph(2))] (13), [Sm(dsp)(2)(N(2)Ph(2))], (14) and [Sm(dtp)(2)(N(2)Ph(2))] (15), respectively; 13 and 14 were characterised by X-ray crystallography. Complex 5 immediately reacted with triphenylphosphane sulfide at room temperature to give [[Tm(dtp)(2)](2)(mu-S)] (16), which was characterised by X-ray crystallography, whereas samarium(II) complexes 6 and 7 did not noticeably react with Ph(3)PS over 24 h under the same conditions.

Journal Article↗
PubMed2003

Electronic properties of 4,4',5,5'-tetramethyl-2,2'-biphosphinine (tmbp) in the redox series fac-[Mn(Br)(CO)3(tmbp)], [Mn(CO)3(tmbp)]2, and [Mn(CO)3(tmbp)](-): crystallographic, spectroelectrochemical, and DFT computational study.

Stepwise electrochemical reduction of the complex fac-[Mn(Br)(CO)(3)(tmbp)] (tmbp = 4,4',5,5'-tetramethyl-2,2'-biphosphinine) produces the dimer [Mn(CO)(3)(tmbp)](2) and the five-coordinate anion [Mn(CO)(3)(tmbp)](-). All three members of the redox series have been characterized by single-crystal X-ray diffraction. The crystallographic data provide valuable insight into the localization of the added electrons on the (carbonyl)manganese and tmbp centers. In particular, the formulation of the two-electron-reduced anion as [Mn(0)(CO)(3)(tmbp(-))](-) also agrees with the analysis of its IR nu(CO) wavenumbers and with the results of density functional theoretical (DFT) MO calculations on this compound. The strongly delocalized pi-bonding in the anion stabilizes its five-coordinate geometry and results in the appearance of several mixed Mn-to-tmbp charge-transfer/IL(tmbp) transitions in the near-UV-vis spectral region. A thorough voltammetric and UV-vis/IR spectroelectrochemical study of the reduction path provided evidence for a direct formation of [Mn(CO)(3)(tmbp)](-) via a two-electron ECE mechanism involving the [Mn(CO)(3)(tmbp)](*) radical transient. At ambient temperature [Mn(CO)(3)(tmbp)](-) reacts rapidly with nonreduced fac-[Mn(Br)(CO)(3)(tmbp)] to produce [Mn(CO)(3)(tmbp)](2). Comparison with the analogous 2,2'-bipyridine complexes has revealed striking similarity in the bonding properties and reactivity, despite the stronger pi-acceptor character of the tmbp ligand.

Journal Article↗
PubMed2003

Synthesis and properties of [CoCp*(2,5-PC4tBu2H2)]: the first monophosphacobaltocene.

The reduction of the phosphacobaltocenium salt [CoCp*(2,5-PC(4)tBu(2)H(2))](+)[BPh(4)](-) (3; Cp*=pentamethylcyclopentadienyl) by magnesium in tetrahydrofuran (THF) furnishes the stable air-sensitive phosphacobaltocene [CoCp*(2,5-PC(4)tBu(2)H(2))] (4) in yields of up to 80 %. The crystal structure of 4 shows long Co-C(alpha) and short C(alpha)-C(beta)bonds in the phospholyl ligand, consistent with a semi-occupied molecular orbital (SOMO) having a" symmetry. A combined Amsterdam density functional (ADF)/photoelectron spectroscopic study, which confirms this assignment, gives ionisation energies (IE) of 5.02 eV from the SOMO and 8.89 eV from the phosphorus "lone pair". A comparison of cyclovoltammograms for 3 and the corresponding cyclopentadienyl complex [CoCp*(1,3-C(5)tBu(2)H(3))](+) [BPh(4)](-)(5) shows that replacing a CH group by an sp(2) phosphorus atom results in an anodic first reduction potential shift of 0.29 V.

Journal Article↗
PubMed2003

Electron transfer between two silyl-substituted phenylene rings: EPR/ENDOR spectra, DFT calculations, and crystal structure of the one-electron reduction compound of a di(m-silylphenylenedisiloxane).

Reduction of a solution of octamethylcyclo-di(m-silylphenylenedisiloxane) 4 in THF on a potassium mirror leads to EPR/ENDOR spectra characterized by a large coupling (approximately 20 MHz) with two protons, similar to the spectra obtained after reduction of the m-disilylbenzene derivative 5, consistent with a localization of the extra electron on a single ring of 4. The spectra recorded after reduction of 4 at low temperature in the presence of an equimolar amount of 18-crown-6 exhibit couplings of approximately 10 MHz with four protons and indicate that embedding the counterion in crown-ether provokes the delocalization of the unpaired electron on the two phenyl rings of 4. The measured hyperfine interactions agree with those calculated by DFT for the optimized structure of 4(.-). Direct information on the structure of this anion is obtained from the X-ray diffraction of crystals grown at -18 degrees C in reduced solutions containing 4, potassium, and crown ether in a THF/hexane mixture. Both DFT and crystal structures clearly indicate the geometry changes caused by the addition of an electron to 4: the interphenyl distance drastically decreases, leading to a partial overlap of the two rings. The structure of 4(.-) is a model for an electron transfer (ET) transition state between the two aromatic rings. The principal reason for the adoption of this structure lies in the bonding interaction between the LUMO (pi orbitals) of these two fragments; moreover, the constraints of the macrocycle probably contribute to the stabilization of this structure.

Journal Article↗
PubMed2003

Mechanism of the Stille reaction catalyzed by palladium ligated to arsine ligand: PhPdI(AsPh3)(DMF) is the species reacting with vinylstannane in DMF.

The kinetics of the reaction of PhPdI(AsPh(3))(2) (formed via the fast oxidative addition of PhI with Pd(0)(AsPh(3))(2)) with a vinyl stannane CH(2)[double bond]CH[bond]Sn(n-Bu)(3) has been investigated in DMF. This reaction (usually called transmetalation step) is the prototype of the rate determining second step of the catalytic cycle of Stille reactions. It is established here that the transmetalation proceeds through PhPdI(AsPh(3))(DMF), generated by the dissociation of one ligand AsPh(3) from PhPdI(AsPh(3))(2). PhPdI(AsPh(3))(DMF) is the reactive species, which leads to styrene through its reaction with CH(2)[double bond]CH[bond]SnBu(3). Consequently, in DMF, the overall nucleophilic attack mainly proceeds via a mechanism involving PhPdI(AsPh(3))(DMF) as the central reactive complex and not PhPdI(AsPh(3))(2). The dimer [Ph(2)Pd(2)(mu(2)-I)(2)(AsPh(3))(2)] has been independently synthesized and characterized by its X-ray structure. In DMF, this dimer dissociates quantitatively into PhPdI(AsPh(3))(DMF), which reacts with CH(2)[double bond]CH[bond]SnBu(3). The rate constant for the reaction of PhPdI(AsPh(3))(DMF) with CH(2)[double bond]CH[bond]SnBu(3) has been determined in DMF for each situation and was found to be comparable.

Journal Article↗
PubMed2003

Hetero-Diels-Alder reactions of 2H-phospholes with aldehydes.

Transient 2-phenyl-3,4-dimethyl-5H-phosphole reacts at 150 degrees C with aldehydes RCH=O to give the corresponding [4 + 2] P-O cycloadducts with endo- (major) and exo-R-substituents. The cycloaddition with alpha,beta-unsaturated aldehydes takes place both at the C=O (major) and C=C bonds. Upon heating under reduced pressure, the benzaldehyde cycloadduct dissociates to give back the 2H-phosphole, which either dimerizes, is trapped by diphenylacetylene, or is deprotonated by (t)BuOK.

Journal Article↗
PubMed2003

Synthesis of the complete carbocyclic skeleton of vinigrol.

[reaction: see text] An efficient entry to the fully elaborated skeleton of vinigrol is described. The installation of the desired stereochemistry at C(12) and the construction of the eight-membered ring were achieved in one operation by a remarkably facile anionic oxy-Cope rearrangement of Z-isopropenyl isomer 24.

Diterpenes↗
PubMed2002

Dianionic platinadiphospholene complexes.

1,2,3,4-tetraphenyl-1,2-dihydrodiphosphetene 1 reacts with lithium or sodium naphthalenide to afford the corresponding dianionic salts 2 and 3. An X-ray crystal structure analysis shows that dianion 3 of general formula [(1)2-2Na3(DME)2, Na(DME)3] is a polymeric structure consisting of [(1)2-2Na3(DME)2] units which are connected together through one sodium atom. Reaction of the dianionic lithium salt 2 with [Pt(COD)Cl2] affords the 4[Li(2.2.1)]2 complex, after the addition of 2 equiv of (2.2.1) cryptate. The overall geometry around platinum in 4[Li(2.2.1)]2 can be described as distorted square planar, and only the diastereomer (1-R, 2-S, 3-R, 4-S) is formed. X-ray data indicate that no delocalization takes place within each platinadiphospholene unit and that complex 4[Li(2.2.1)]2 must be regarded as the coordination of two molecules of dianion 2 onto a Pt2+ center. Reaction of the dianionic sodium salt 3 with 1 equiv of [Pt(COD)Cl2] produces the 4[Na(DME,Et2O)]2 complex which adopts a pseudotetrahedral geometry around platinum ( between interplane angles = 35), the two cationic units [Na(DME, Et2O)] being located along a C2 axis. Four weak interactions exist between the sodium cations and the phosphorus atoms. Only the (1-S, 2-S, 3-S, 4-S) diastereomer is formed. Bond distances in the diphospholene units of 4[Na(DME,Et2O)]2 are close to that of dianion 3 indicating that, like in 4[Li(2.2.1)]2, the complex can be described as a platinum (+2) dianionic species.

Journal Article↗