Biomedical subjects

Ken Hosoya

Publications and source records attributed to Ken Hosoya.

At least 19 recordsLinked to original sources

PubMed2007

Anion- and cation-exchange MicroHPLC utilizing poly(methacrylates)-coated monolithic silica capillary columns.

A novel method was developed for the preparation of highly efficient anion- and cation-exchange microHPLC columns using an on-column polymerization of methacrylates having amine or sulfonic acid functional groups onto monolithic silica capillary columns modified with 3-methacryloxypropyltriethoxysilane as the anchor groups. The chromatographic evaluation of the columns using nucleic acids, nucleotides, and inorganic anions as samples showed the characteristics of the ion-exchange-type stationary phases. These columns exhibited higher separation efficiency when compared with the conventional particle-packed columns. A capillary column for the simultaneous anion- and cation-exchange separation could be prepared by a step-by-step functionalization. The advantages of this column preparation will include: (1) no need of column packing; (2) no need of the preparation of silane reagents possessing anion- and cation-exchange functionalities; (3) the amount of immobilized polymer could be controlled by changing polymerization conditions. These columns should be suitable for the separation of biologically active compounds by the microHPLC modes.

Anion Exchange Resins↗

PubMed2006

Preparation of highly efficient monolithic silica capillary columns for the separations in weak cation-exchange and HILIC modes.

Weak cation-exchange (WCX) and HILIC modes columns were prepared by on-column polymerization of acrylic acid on monolithic silica capillary columns modified with N-(3-triethoxysilylpropyl)methacrylamide anchor groups. The polymer-coated columns could be used for HILIC mode separation of pyridylamino (PA)-sugars and peptides including a tryptic digest of BSA, while for weak cation-exchange mode for the separation of proteins and nucleosides even at high linear velocity. The poly(acrylic acid) coated monolithic silica capillary columns showed greater retention toward PA-sugars than a polyacrylamide coated monolithic silica capillary columns prepared in the same manner. Proteins and nucleosides were separated effectively at pH 6.9 using the same column. The column provided fair permeability after the polymer-coating step. High-speed separation of proteins at u=4.66 mm/s with high efficiency was shown to be possible, while high-speed separation of nucleosides has achieved within one minute using the column at u=8.67 mm/s, suggesting that the column will be suitable for the second dimension separation of multidimensional HPLC systems.

Acrylic Resins↗

PubMed2006

Simultaneous determination of bisphenol A and its halogenated derivatives in river water by combination of isotope imprinting and liquid chromatography-mass spectrometry.

A restricted access media-molecularly imprinted polymer (RAM-MIP) for [2H16]bisphenol A (BPA-d16) was prepared by a multi-step swelling and polymerization method using 4-vinylpyridine as a functional monomer and ethylene glycol dimethacrylate as a cross-linker, followed by hydrophilic surface modification using glycerol dimethacrylate and glycerol monomethacrylate as hydrophilic monomers. The obtained RAM-MIP showed excellent molecular recognition abilities for BPA and BPA-d6 as well as BPA-d16 used as the template molecule, and good ones for tetrachlorobisphenol A (Cl4-BPA) and tetrabromobisphenol A (Br4-BPA). Next, the RAM-MIP was utilized for selective on-line pretreatment and enrichment of BPA, Cl4-BPA and Br4-BPA in a river water sample, followed by their separation and determination by LC-MS. The calibration graphs of BPA, Cl4-BPA and Br4-BPA, constructed using BPA-d6 as an internal standard, showed good linearity in the range of 12.5-200 pg/mL (r > 0.999) with a 2-mL injection of a river water sample. The inter-day precision data for the assay of BPA, Cl4-BPA and Br4-BPA at 25 pg/mL were 1.08, 3.67 and 1.58%, respectively. Furthermore, this method was successfully applied for the simultaneous determination of BPA and its halogenated derivatives in river water.

Benzhydryl Compounds↗

PubMed2006

HILIC mode separation of polar compounds by monolithic silica capillary columns coated with polyacrylamide.

HILIC mode columns were prepared by an on-column polymerization of acrylamide on a monolithic silica capillary column modified with N-(3-trimethoxysilylpropyl)methacrylamide as the anchor group. The products showed HILIC mode retention characteristics with three times greater permeability and slightly higher column efficiency compared to a commercially available amide-type HILIC column packed with 5-mum particles. The selectivity of the monolithic silica-based column was similar to that of the particulate column for each group of solutes towards nucleosides, nucleic bases and carbohydrate derivatives, although a considerable difference was observed in the selectivity for the solute groups. Although the retention of solutes based on the polar functionality was much smaller with the monolithic silica columns, which had a smaller phase ratio, than with the particle-packed column, the former can achieve better separation utilizing the high permeability and higher column efficiencies of a longer column.

Journal Article↗

PubMed2006

High-performance polymer-based monolithic capillary column.

In this report, we introduce a new entry of high-performance polymer-based monolithic capillary column for mainly small molecules. This capillary column was prepared using a newly introduced epoxy monomer with diamines. Simply heat-induced polycondensation in an appropriate porogenic solvent afforded a really homogeneous co-continuous monolithic structure having submicrometer-size skeletons with micrometer-size through-pores. We were also able to prepare chiral monolithic columns using a chiral epoxy monomer as well as a chiral diamine. A 21.5-cm-long, 100-mum-i.d. column afforded up to 40 000 theoretical plate numbers (N) for alkylbenzenes in 60% aqueous acetonitrile as a reversed-phase-mode stationary phase. Due to a quite low column pressure drop, a 150-cm-long column was prepared. This long column afforded up to 200 000 plates for alkylbenzenes with only a 4-MPa column pressure drop. In contrast, in 100% acetonitrile, this column has "HILIC" property to show up to 60 000 plates for methanol with a 17.5-cm-long column. In this mode, we were able to separate nucleic acids. In addition, we have prepared a chiral column with both of the chiral epoxy monomers and an amine. This column was able to chirally discriminate a racemic alcohol in a reversed-phase mode.

Journal Article↗

PubMed2006

An easy preparation of 'monolithic type' hydrophilic solid phase: capability for affinity resin to isolate target proteins.

An easy preparation method of monolithic type hydrophilic solid phase was discussed. Newly invented functional monomer with a hydrophilic cross-linking agent was co-polymerized to realize well-controlled monolithic co-continuous structure by use of diethylene glycol as porogenic solvent. We were able to control the content of the functional monomer up to 40 vol% without loss of monolithic structure. Those prepared were utilized as affinity resins after immobilization of FK506, an immunosuppressive drug as a ligand. It was found that the affinity resins prepared were hydrophilic enough to eliminate non-specific adsorption of proteins, while two of the target proteins of FK506 tested were successfully captured.

Adsorption↗

PubMed2006

Isolating the whole complex of target proteins of FK506 using affinity resins from novel solid phases.

The development of novel solid phases enabled us to create affinity resins that could be used to isolate the whole complex of target proteins responsible for the immunosuppressive effects of FK506 from rat brain lysate, whereas the affinity resins from commercially available matrices could not achieve this isolation. The results illustrate the enhanced effectiveness of the affinity resin made from this novel material at identifying the target protein of the bioactive compound compared to resins made from the well-known materials Affigel or Toyopearl. This effectiveness arises because the novel material is hydrophilic enough to reduce nonspecific binding proteins and because it has a higher density of ligands that capture the nonubiquitous target protein.

Animals↗

PubMed2006

Preparation of glycerol dimethacrylate-based polymer monolith with unusual porous properties achieved via viscoelastic phase separation induced by monodisperse ultra high molecular weight poly(styrene) as a porogen.

The preparation of polymer-based monolith capillary was examined by the use of glycerol dimethacrylate (GDMA) as monomer and monodisperse standard polystyrene (PS) solution in chlorobenzene as porogen. Poly-GDMA monoliths were prepared in situ in test tubes with standard PS having the variety of molecular weight (defined as Mw hereafter) from 50,000 to 3,840,000, and their morphology was compared to that of poly-GDMA monolith prepared in situ with a poor porogenic solvent of GDMA. According to scanning electron micrograph (SEM) observation, the structure of poly-GDMA monolith prepared in situ with toluene as a poor porogenic solvent showed a typical agglomerated globular structure, whereas the morphology of poly-GDMA monolith prepared in situ with the polymer (PS) porogenic solution was transformed from the aggregated globule form to three dimensionally (3D) continuous skeletal structure with the increase of Mw of standard PS utilized. Along with this morphological transformation or change, in the case of poly-GDMA monolith prepared in situ with ultra high Mw standard PS porogenic solution, the pore size distribution showed a sharp bimodal distribution, with one peak being located around 4 nm in the mesopore range (2-50 nm) and the other peak located around 1-2 microm in the macropore range (>50 nm), respectively. The poly-GDMA capillaries were prepared in situ with toluene, low Mw (50,000, 600,000) PS solution in chlorobenzene and the above mentioned ultra high Mw PS solution in chlorobenzene as a porogen, respectively, and measured by mu-HPLC with benzene and n-alkyl phenyl ketone as solutes for the evaluation in aqueous methanol (MeOH/H(2)O = 50/50-80/20, v/v). The permeability of capillaries prepared in situ with ultra high Mw standard PS polymer porogenic solution was much larger, compared to those of the capillaries prepared in situ with low Mw standard PS polymer porogenic solution or with toluene as porogen. On the other hand, the column efficiency was better in the case of the capillary prepared in situ with the ultra high Mw PS solution than in the latter capillaries. Those observations indicated that the ultra high Mw standard PS polymer porogenic solution should delay dynamically the phase separation of polymerizing mixture because of its visco-elasticity and should contribute to the creation of three dimensionally continuous skeletal monolith structure better to afford high separation efficiency.

Acetophenones↗

PubMed2006

Solvent effects in the preparation of molecularly imprinted polymers for melatonin using N-propionyl-5-methoxytryptamine as the pseudo template.

To clarify the role of diluents in the preparation of molecularly imprinted polymers utilizing only hydrogen bonding, we investigated the effects of diluents by using different solvents. Melatonin (N-acetyl-5-methoxytryptamine), an amide bond and indole ring-containing hormone was chosen as the target molecule. N-Propionyl-5-methoxytryptamine was used as the pseudo template, methacrylic acid as the functional monomer, and solvents were used as diluents. Interactions between the template, the functional monomer, melatonin, and the solvents, were observed by 1H NMR spectroscopy. The polymers were evaluated by high-performance liquid chromatography. The results suggest the hydrogen bonding-acceptor capacity of the solvent is the most important factor in the preparation of molecularly imprinted polymers for hydrogen bonding-donating molecules. Hydrogen bonding between the template, the functional monomer, and solvent can be estimated from the chemical shifts in 1H NMR spectra of those molecules in the solvent.

5-Methoxytryptamine↗

PubMed2006

Fully automated liquid chromatography-mass spectrometry determination of 17beta-estradiol in river water.

Surface modified molecularly imprinted polymers (SM-MIPs) for 17beta-estradiol (E2), utilizing 6-ketoecradiol as a pseudo template were prepared. MIPs for E2 were synthesized using 4-vinyl pyridine and ethylene dimethacrylate as a functional monomer and cross-linking agent, respectively. MIPs selectively retained E2 and provided excellent chromatographic resolution from interfering compounds inherent in river water sample matrices. Therefore, freshly prepared MIPs were applied to quantitative mass spectrometric (negative electrospray ionization mode) detection of low levels of E2 in river water sample. In order to pre-concentrate the target compound for HPLC analysis, column switching was coupled with a pretreatment column packed with the MIPs. The repeatability of actual determinations of river water sample, in which background E2 was not detected, spiked with 50 ng/L of E2 was 2.2% RSD with a detection limit and qualification limit of 1.8 and 5.4 ng/L, respectively. Surface modification of MIP particlefs packed in the pretreatment column provided selective affinity and on-line concentration of low levels of E2 while simultaneously eliminating sample matrix interference, resulting in a significant increase in sensitivity and reproducibility for liquid chromatography-mass spectrometry analysis of E2 in river water sample.

Chromatography, High Pressure Liquid↗

PubMed2005

Two-dimensional reversed-phase liquid chromatography using two monolithic silica C18 columns and different mobile phase modifiers in the two dimensions.

Comprehensive two-dimensional (2D) HPLC in the reversed-phase liquid chromatography (RPLC) mode using C18 silica monolith columns at first dimension (1st-D) (10 cm x 4.6mm I.D.) and second dimension (2nd-D) (5 cm x 4.6mm I.D.) was carried out successfully. A mixture of water and tetrahydrofuran (THF) was used as a mobile phase in the 1st-D separation, and a mixture of water and methanol (CH3OH) in the 2nd-D separation. Sample fractions from 1st-D column were directly loaded into an injection loop of the 2nd-D HPLC equipped with two injector valves for one column. The fractionation time at the 1st-D that was equal to the separation time at the 2nd-D was 45 or 60s. Total peak capacity up to 900 was obtained in about 60 min for the isocratic mode separation of aromatic compounds in this system. Gradient elution mode applied to both 1st-D and 2nd-D separations resulted in shorter separation time and better separation efficiencies than the isocratic mode. It was demonstrated that 2D-HPLC systems employing popular C18 stationary phases with different organic modifiers in mobile phases for each dimension could produce large peak capacity. The different selectivities were provided by the difference in polar interactions between a solute and the organic modifier existing in the stationary phase.

Chromatography, High Pressure Liquid↗

PubMed2005

Development of chemically stable solid phases for the target isolation with reduced nonspecific binding proteins.

Poly(methacrylate) matrices for affinity resins were designed and synthesized based on our previous results that nonspecific protein absorption on affinity resins strongly depended on their hydrophobic property. The novel affinity resins bearing FK506 (6a, 6b) captured specific binding protein, FKBP12, with a small amount of nonspecific binding proteins. The amount of nonspecific binding proteins on 6a-6b was much reduced compared to that on commercially available poly(methacrylate) resins, Toyopearl (8), and was almost the same as that on one of the most popular resins, Affigel (9). Interestingly, 6a and 6b could isolate FKBP52 as a specific binding protein as well, although 8 and 9 could not.

Absorption↗

PubMed2005

Preparation of a novel molecularly imprinted polymer using a water-soluble crosslinking agent.

A molecularly imprinted polymer was prepared using a water-soluble crosslinking agent. An ionic complex was utilized as the assembly for the template molecule and the functional monomer, and water as porogenic solvent during preparation of the imprinted polymer. The results of chromatographic evaluations for the prepared polymer suggested that the polymer had much lower hydrophobicity compared with usual octadecyl group bonded silica or the usual molecular imprinted polymer prepared from ethyleneglycol dimethacrylate, and the selective recognition ability for template molecule in the completely aqueous condition.

Journal Article↗

PubMed2005

Novel surface modified molecularly imprinted polymer focused on the removal of interference in environmental water samples for chromatographic determination.

Uniformly sized molecularly imprinted polymers (MIPs) for bisphenol A (BPA) with surface modification and immobilized intervals of functional monomers afforded by utilizing 4,4'-methylenebisphenol as a pseudo component have been prepared. MIPs for BPA were prepared using 4-vinyl pyridine immobilized in the most effective interval and ethylene glycol dimethacrylate as a functional monomer and cross-linking agent, respectively. Prepared MIPs showed significant selectivity for BPA retention and removal performance for interference in actual samples as the HPLC stationary phase compared to those of ordinary MIPs. These MIPs were employed as pretreatment media of column switching HPLC and the HPLC system provided a detection limit of 0.36 ppt when electrochemical detection was used. Actual samples, including Suwannee River natural organic matter (NOM), were applied and BPA was detected in the NOM even if widely used UV detection was employed.

Chromatography, High Pressure Liquid↗

PubMed2005

Silica monolithic membrane as separation medium. Summable property of different membranes for high-performance liquid chromatographic separation.

We studied an applicability of a silica monolithic membrane as separation medium for high-performance liquid chromatography (HPLC). We prepared porous monolithic silica membranes having a three-dimensional network structure to cut and shape into a membrane separation medium. We evaluated chromatographic properties of a variety of solutes using a column containing the membranes with HPLC to elucidate summable property of the membrane separation media. In addition, we made brief study on separation of HbA1c in whole blood with the stacked" membranes having different surface characteristics in one column, which is a membrane column. We confirmed that the membrane column was able to separate HbA1c from other matrix in whole blood to some extent, and it also had an excellent ability for hydrophobic and ion exchange adsorption.

Chromatography, High Pressure Liquid↗

PubMed2005

LC/MS determination of bisphenol A in river water using a surface-modified molecularly-imprinted polymer as an on-line pretreatment device.

A new analytical method for the determination of bisphenol A (BPA) by LC/MS was developed and applied to environmental water samples. Quantitative MS detection of BPA was carried out in the negative mode. In order to preconcentrate the target compound yet prevent serious contamination of the water samples from the experimental environment, we employed column switching HPLC coupled with a pretreatment column of surface-modified molecularly-imprinted polymers. The recovery of BPA from a spiked environmental water sample was 102% and the repeatability of actual determinations of water samples containing 20 ng/L of BPA was 5.4% RSD. By modifying the surfaces of the molecularly-imprinted polymer particles packed in the pretreatment column, interference from the water samples was effectively removed, resulting in a significant increase in sensitivity and more reliable results. This method was successfully applied to the trace determination of BPA in environmental water samples using LC/MS.

Benzhydryl Compounds↗

PubMed2005

A new simply and effective fractionation method for cylindrospermopsin analyses.

A new simply and effective fractionation method for cylindrospermopsin (CYN) analyses was developed. The extract from cells of Cylindrospermopsis raciborskii was resuspended with 0.1 M carbonate buffer at pH 10.5, and pass through the double-cartridges column which was consisted of a styrene polymer cartridge and an anion exchange cartridge. CYN and deoxy-CYN were adsorbed with the anion exchange cartridge. After separation of the anion exchange cartridge, adsorbed compounds were eluted from the cartridge with 50% methanol containing 1% formic acid solution. CYN and deoxy-CYN were selectively condensed in the eluted solution. When CYN was analyzed by LC-photodiode array or LC/MS, only two peaks of CYN and deoxy-CYN were detected quantitatively. The results suggest that the fractionation method is a useful method for CYN analyses and must be utilized for CYN purification.

Alkaloids↗

PubMed2004

A molecular recognition strategy towards tetra-chlorinated dibenzo-p-dioxins, TCDDs.

Uniformly sized polymeric separation media were prepared using o- or p-xylene as porogenic template to investigate chromatographic selectivity towards tetra-chlorinated dibenzo-p-dioxins (TCDDs). TCDDs having chlorine atoms at ortho positions of phenyl rings were selectively retained on stationary phase prepared with o-xylene as porogenic template, while TCDDs having chlorine atoms at para positions of phenyl ring were found to be retained selectively on the stationary phase imprinted by the porogenic template, p-xylene. Slightly longer cross-linking agent afforded chromatographically selective retention for larger TCDD isomers. It was also found that positional relationship between substituted chlorine atoms was also important for chromatographic recognition.

Chromatography, High Pressure Liquid↗