Biomedical subjects

K L Michael

Publications and source records attributed to K L Michael.

6 recordsLinked to original sources

PubMed2001

A duplexed microsphere-based fluorescent immunoassay.

Microsphere-based immunoassays are described for the simultaneous measurement of the clinically important drugs digoxin and theophylline. Competitive immunoassays were performed using haptenized microspheres and antibodies labeled with horseradish peroxidase. Enzyme-catalyzed reporter deposition (CARD) resulted in immunofluorescence signal amplification. Two encoding dyes were used to differentiate analytical signals from microspheres containing assays for the two analytes. An epifluorescence microscope and a CCD camera interfaced with a computer were utilized to measure fluorescence signals of individual microspheres. The microspheres from a duplexed assay were mounted on microscope slides as well as inserted into wells etched into the distal ends of optical imaging fibers. Fluorescence images from both formats were captured. In the experiments using microscope slides, the immunoassays were successfully duplexed and only marginal interferences at high analyte concentrations were observed. Preliminary results suggest that simultaneous determination of the two analytes using a fiber-based sensor-array format is feasible, but requires further development before precise quantitative analyses are possible.

Animals↗

PubMed1999

Combined imaging and chemical sensing of fertilization-induced acid release from single sea urchin eggs.

We demonstrate a microarray sensor capable of obtaining both chemical and visual information on multiple cells simultaneously with single-cell resolution. The array was fabricated by covalently immobilizing a thin, pH-sensitive polymer layer on the distal end of an optical imaging fiber. The sensor's ability to measure localized chemical dynamics in real-time was evaluated using sea urchin fertilization biochemistry as a model system. Following sea urchin fertilization, the Na(+)/H(+) transporter is activated to exchange extracellular sodium ions for intracellular hydrogen ions, causing a release of hydrogen ions at the egg's surface. By placing the pH sensor proximal to the egg and switching between a fluorescence image and a white light image, we were able to observe both localized pH changes following fertilization as well as morphological transformations during cell division.

Animals↗

PubMed1999

A far-field-viewing sensor for making analytical measurements in remote locations.

We demonstrate a far-field-viewing GRINscope sensor for making analytical measurements in remote locations. The GRINscope was fabricated by permanently affixing a micro-Gradient index (GRIN) lens on the distal face of a 350-micron-diameter optical imaging fiber. The GRINscope can obtain both chemical and visual information. In one application, a thin, pH-sensitive polymer layer was immobilized on the distal end of the GRINscope. The ability of the GRINscope to visually image its far-field surroundings and concurrently detect pH changes in a flowing stream was demonstrated. In a different application, the GRINscope was used to image pH- and O2-sensitive particles on a remote substrate and simultaneously measure their fluorescence intensity in response to pH or pO2 changes.

Chemistry Techniques, Analytical↗

PubMed1999

Convergent, self-encoded bead sensor arrays in the design of an artificial nose.

We report a new approach to designing an artificial nose based on high-density optical arrays that directly incorporate a number of structural and operational features of the olfactory system. The arrays are comprised of thousands of microsphere (bead) sensors, each belonging to a discrete class, randomly dispersed across the face of an etched optical imaging fiber. Beads are recognized and classified after array assembly by their unique, "self-encoded" response pattern to a selected vapor pulse. The high degree of redundancy built into the array parallels that found in nature and affords new opportunities for chemical-sensor signal amplification. Since each bead is independently addressable through its own light channel, it is possible to combine responses from same-type beads randomly distributed throughout the array in a manner reminiscent of the sensory-neuron convergence observed in the mammalian olfactory system. Signal-to-noise improvements of approximately n1/2 have been achieved using this method.

Artificial Organs↗

PubMed1998

Randomly ordered addressable high-density optical sensor arrays.

Array-based sensors provide an architecture for multianalyte sensing. In this paper, we report a new approach for array fabrication. Sensors are made by immobilizing different reactive chemistries on the surfaces of microspheres. Sensor arrays are prepared by randomly distributing a mixture of microsphere sensors on an optical substrate containing thousands of micrometer-scale wells. The sensors occupy a different location from array to array; thus the identity of each sensor is ascertained and registered on the detector using encoding schemes, rather than by a predetermined location in the array. The approach thereby shifts the demand from fabrication to signal processing. The availability of commercial image analysis software makes such a shift both cost-effective and time efficient.

Cost-Benefit Analysis↗

PubMed1995

Combined imaging and chemical sensing using a single optical imaging fiber.

Despite many innovations and developments in the field of fiber-optic chemical sensors, optical fibers have not been employed to both view a sample and concurrently detect an analyte of interest. While chemical sensors employing a single optical fiber or a noncoherent fiberoptic bundle have been applied to a wide variety of analytical determinations, they cannot be used for imaging. Similarly, coherent imaging fibers have been employed only for their originally intended purpose, image transmission. We herein report a new technique for viewing a sample and measuring surface chemical concentrations that employs a coherent imaging fiber. The method is based on the deposition of a thin, analyte-sensitive polymer layer on the distal surface of a 350-microns-diameter imaging fiber. We present results from a pH sensor array and an acetylcholine biosensor array, each of which contains approximately 6000 optical sensors. The acetylcholine biosensor has a detection limit of 35 microM and a fast (< 1 s) response time. In association with an epifluorescence microscope and a charge-coupled device, these modified imaging fibers can display visual information of a remote sample with 4-microns spatial resolution, allowing for alternating acquisition of both chemical analysis and visual histology.

Acetylcholinesterase↗