Search PubMed⌕ Search

Biomedical subjects

James M Tour

Publications and source records attributed to James M Tour.

At least 37 records · Page 2Linked to original sources
PubMed2005

Green chemical functionalization of single-walled carbon nanotubes in ionic liquids.

Single walled carbon nanotubes (SWNTs) are exfoliated and functionalized predominantly as individuals by grinding them for minutes at room temperature with aryldiazonium salts in the presence of ionic liquids (ILs) and K(2)CO(3). This constitutes an extremely rapid and mild green chemical functionalization process for obtaining the individualized nanotube structures. A number of ILs and various reaction conditions were surveyed. Raman, XPS, UV/vis/NIR spectroscopies, thermogravimetric analysis, and atomic force and transmission electron microscopies were used to characterize the products.

Molecular Structure↗
PubMed2005

Synthesis, spectroscopic and nonlinear optical properties of multiple [60]fullerene-oligo(p-phenylene ethynylene) hybrids.

A series of multiple [60]fullerene terminated oligo(p-phenylene ethynylene) (OPE) hybrid compounds has been synthesized through a newly developed in situ ethynylation method. Structural and magnetic shielding properties of the highly unsaturated carbon-rich C(60) and OPE scaffolds were characterized by 1D and 2D NMR spectroscopic analyses. Electronic interactions between the [60]fullerenes and the OPE backbones were investigated by UV/Vis spectroscopic and cyclic voltammetry (CV) experiments. Our studies clearly show that although the multiple [60]fullerene groups are connected via pi-conjugated OPE frameworks, they present diminutive electronic interactions in the ground state, and the electronic behavior of the [60]fullerene cages are only affected by the OPE backbones through modest inductive effects. Interestingly, sizable third-order nonlinear optical (NLO) responses (gamma) and enhanced two-photon absorption (TPA) cross-sections (sigma((2))) were determined for the multifullerene-OPE hybrid 31 relative to its OPE precursor from differential optical Kerr effect (DOKE) experiments. Such enhanced NLO performance is presumably due to the occurrence of periconjugation and/or charge transfer effects in the excited state. In addition, comparatively strong excited-state absorption was observed and characterized for OPE pentamer 12. Thus, the use of such fullerene-derivatized conjugated oligomers aids the quest for molecules with large third-order NLO and TPA properties.

Fullerenes↗
PubMed2005

Preparative fluorous mixture synthesis of diazonium-functionalized oligo(phenylene vinylene)s.

[structure: see text] A series of building blocks for the synthesis of oligo(phenylene vinylene)s (OPVs) and hybrid oligomers were prepared, and alternating Heck coupling and Horner-Wadswoth-Emmons (HWE) reactions were used to couple the building blocks. Model studies were carried out to optimize the reaction strategies. The products were made to bear aryl diazonium functionalities that allow them to be used as surface grafting moieties in hybrid silicon/molecule assemblies. A library of OPV and hybrid oligomer tetramers was synthesized using fluorous mixture synthesis (FMS). The fluorous tags, which are secondary amines bearing different numbers of fluorine atoms, were synthesized and used as phase tags in mixture synthesis. The tags and substrates were anchored together by triazene linkages. The mixture synthesis was monitored by analytical HPLC on a fluorous column, and isolation of final OPV and hybrid oligomer tetramers was achieved by preparative HPLC. At the end of the FMS, after demixing, the tagged products were detagged by cleaving the triazene linkage and generating a series of aryl diazonium compounds. The fluorous tags could be recovered and reused. The NMR spectra of the 1-aryl-3,3-dialkyltriazenes are discussed.

Journal Article↗
PubMed2005

Separation of single-walled carbon nanotubes on silica gel. Materials morphology and Raman excitation wavelength affect data interpretation.

In this report, procedures are discussed for the enrichment of single-walled carbon nanotube (SWNT) types by simple filtration of the functionalized SWNTs through silica gel. This separation uses nanotube sidewall functionalization employing two different strategies. In the first approach, a crude mixture of metallic and semiconducting SWNTs was heavily functionalized with 4-tert-butylphenyl addends to impart solubility to the entire sample of SWNTs. Two major polarity fractions were rapidly filtered through silica gel, with the solvent being removed in vacuo, heated to 700 degrees C to remove the addends, and analyzed spectroscopically. The second approach uses two different aryldiazonium salts (one with a polar grafting group and one nonpolar), appended selectively onto the different SWNTs by means of titration and monitoring by UV analysis throughout the functionalization process. The different addends accentuate the polarity differences between the band-gap-based types permitting their partial separation on silica gel. Thermal treatment regenerated pristine SWNTs in enriched fractions. The processed samples were analyzed and characterized by Raman spectroscopy. A controlled functionalization method using 4-fluorophenyl and 4-iodophenyl addends was performed, and XPS analyses yielded data on the degree of functionalization needed to affect the van Hove singularities in the UV/vis/NIR spectra. Finally, we demonstrate that relative peak intensity changes in Raman spectra can be caused by morphological changes in SWNT bundling based on differing flocculation or deposition methods. Therefore a misleading impression of separations can result, underscoring the care needed in assessing efficacies in SWNT enrichment and the prerequisite use of multiple excitation wavelengths and similar flocculation or deposition methods in comparative analyses.

Journal Article↗
PubMed2005

Molecularly inherent voltage-controlled conductance switching.

Molecular electronics has been proposed as a pathway for high-density nanoelectronic devices. This pathway involves the development of a molecular memory device based on reversible switching of a molecule between two conducting states in response to a trigger, such as an applied voltage. Here we demonstrate that voltage-triggered switching is indeed a molecular phenomenon by carrying out studies on the same molecule using three different experimental configurations-scanning tunnelling microscopy, crossed-wire junction, and magnetic-bead junction. We also demonstrate that voltage-triggered switching is distinctly different from stochastic switching, essentially a transient (time-dependent) phenomenon that is independent of the applied voltage.

Journal Article↗
PubMed2005

Effect of local environment on molecular conduction: isolated molecule versus self-assembled monolayer.

Developing a fundamental understanding of molecular conduction in different device environments is essential to the advance of molecular electronics. We show through a quantitative comparison of two types of junctions with the same molecule - one based on an isolated individual molecule and the other on a self-assembled monolayer - that intrinsic differences in the conduction per molecule as large as several orders of magnitude can exist simply as a function of the presence or absence of neighboring molecules. This behavior can be understood on the basis of thermal and electrostatic effects that depend critically on the local molecular environment. These results will help to unify data obtained from disparate device structures and to provide an improved basis for designing future molecular electronic devices.

Journal Article↗
PubMed2005

Reversible bistable switching in nanoscale thiol-substituted oligoaniline molecular junctions.

Single molecular monolayers of oligoaniline dimers were integrated into sub-40-nm-diameter metal nanowires to form in-wire molecular junctions. These junctions exhibited reproducible room temperature bistable switching with zero-bias high- to low-current state conductance ratios of up to 50, switching threshold voltages of approximately +/-1.5 V, and no measurable decay in the high-state current over 22 h. Such switching was not observed in similarly fabricated saturated dodecane (C12) or conjugated oligo(phenylene ethynylene) (OPE) molecular junctions. The low- and high-state current versus voltage was independent of temperature (10-300 K), suggesting that the dominant transport mechanism in these junctions is coherent tunneling. Inelastic electron tunneling spectra collected at 10 K show a change in the vibrational modes of the oligoaniline dimers when the junctions are switched from the low- to the high-current state. The results of these measurements suggest that the switching behavior is an inherent molecular feature that can be attributed to the oligoaniline dimer molecules that form the junction.

Aniline Compounds↗
PubMed2005

Cross-step place-exchange of oligo(phenylene-ethynylene) molecules.

We have observed nitro-functionalized oligo(phenylene-ethynylene) molecules exhibiting motion up and down Au{111} substrate monatomic step edges within host self-assembled monolayers of n-alkanethiols, independent of previously observed conductance switching. Single molecules have been imaged with scanning tunneling microscopy to place-exchange reversibly between the top and bottom of monatomic substrate step edges.

Journal Article↗
PubMed2005

Directional control in thermally driven single-molecule nanocars.

With the hope of directing future bottom-up fabrication through bulk external stimuli (such as electric fields) on nanometer-sized transporters, we sought to study controlled molecular motion on surfaces through the rational design of surface-capable molecular structures called nanocars. Here we show that the observed movement of the nanocars is a new type of fullerene-based wheel-like rolling motion, not stick-slip or sliding translation, due to evidence including directional preference in both direct and indirect manipulation and studies of related molecular structures.

Journal Article↗
PubMed2004

Spontaneous assembly of organic thiocyanates on gold sufaces. Alternative precursors for gold thiolate assemblies.

Thiolate self-assembly on gold has proven to be a valuable technique for assembling monolayers on a wide variety of substrates. However, the oxidative instability of the thiols, especially aromatic thiols and alpha,omega-dithiols, presents several difficulties. Shown here is that thiocyanates, easily synthesized stable thiol derivatives, can be directly assembled on gold surfaces with no auxiliary reagents required. Assembly is complete in 24 h and leaves a similar gold thiolate structure as seen in typical thiol self-assembled monolayers.

Journal Article↗
PubMed2004

Mediating stochastic switching of single molecules using chemical functionality.

We have studied oligo(phenylene-ethynylene)s inserted into amide-containing alkanethiol self-assembled monolayers using scanning tunneling microscopy to demonstrate switching based on chemical functionality of the environment of the inserted molecules. The molecules show stability in two conductance states: an ON and an OFF state. We demonstrate bias-dependent switching due to hydrogen bonding between the inserted oligo(phenylene-ethynylene) and the matrix molecules. In addition, the inserted molecules exhibit fewer switching events than previously reported for alkanethiol matrixes, which we attribute to the rigidity of the hydrogen-bonded matrix.

Journal Article↗
PubMed2004

Water-soluble, exfoliated, nonroping single-wall carbon nanotubes.

The scalable superacid solvent, radical-initiated aryldiazonium functionalization process produces individual SWNTs without the need for surfactant wrapping, centrifugation, or sonication. This work provides a facile pathway to aryl sulfonic acid-functionalized SWNTs that are not roped or bundled, and the functionalized nanotubes are water soluble.

Journal Article↗
PubMed2004

Facile synthesis of multifullerene-OPE hybrids via in situ ethynylation.

[reaction: see text] A series of fullerene-terminated oligo(phenylene ethynylene)s (OPEs) (1a-d and 2) have been synthesized and further characterized by cyclic voltammetry (CV) and UV-vis spectroscopy. The key step in the syntheses is an effective one-pot reaction that allows the attachment of C(60) to multiple terminal alkynes.

Journal Article↗
PubMed2004

Structure-dependent charge transport and storage in self-assembled monolayers of compounds of interest in molecular electronics: effects of tip material, headgroup, and surface concentration.

The electrical properties of self-assembled monolayers (SAMs) on a gold surface have been explored to address the relation between the conductance of a molecule and its electronic structure. We probe interfacial electron transfer processes, particularly those involving electroactive groups, of SAMs of thiolates on Au by using shear force-based scanning probe microscopy (SPM) combined with current-voltage (i-V) and current-distance (i-d) measurements. Peak-shaped i-V curves were obtained for the nitro- and amino-based SAMs studied here. Peak-shaped cathodic i-V curves for nitro-based SAMs were observed at negative potentials in both forward and reverse scans and were used to define the threshold tip bias, V(TH), for electric conduction. For a SAM of 2',5'-dinitro-4,4'-bis(phenylethynyl)-1-benzenethiolate, VII, V(TH) was nearly independent of the tip material [Ir, Pt, Ir-Pt (20-80%), Pd, Ni, Au, Ag, In]. For all of the SAMs studied, the current decreased exponentially with increasing distance, d, between tip and substrate. The exponential attenuation factors (beta values) were lower for the nitro-based SAMs studied here, as compared with alkylthiol-based SAMs. Both V(TH) and beta of the nitro-based SAMs also depended strongly on the molecular headgroup on the end benzene ring addressed by the tip. Finally, we confirmed the "memory" effect observed for nitro-based SAMs. For mixed SAMs of VII and hexadecanethiol, I, the fraction of the charge collected in the negative tip bias region that can be read out at a positive tip bias on reverse scan (up to 38%) depended on the film composition and decreased with an increasing fraction of I, suggesting that lateral electron hopping among molecules of VII occurs in the vicinity of the tip.

Journal Article↗
PubMed2004

Valence electron orbitals of an oligo(p-phenylene-ethynylene)thiol on gold.

This communication reports measurement of one-photon (21.2 eV) and one-color, two-photon (3.2-4.5 eV) photoemission spectra of 4,4'-bis-(phenylethynyl)benzenethiol chemisorbed on gold. Four features are observed in these spectra: two occupied, predominantly molecular levels below the Fermi level and two unoccupied, predominantly molecular levels above the Fermi level. The occupied and unoccupied bands closest to the Fermi level are assigned to delocalized pi-bands, and the other occupied and unoccupied bands, to localized pi-bands. With this assignment, the hole- and electron-injection barriers and the transport gap for those levels are deduced.

Journal Article↗
PubMed2004

Orthogonally functionalized oligomers for controlled self-assembly.

The synthesis of molecules terminated with complementary thiol-protecting groups is described. The target compounds contain functionalities on one end known to form self-assembled monolayers on metal surfaces while at the other end an intact thioacetate is present whereby self-assembly may again occur after an in situ deprotection. Self-assembly data is reported for selected compounds to assess their efficacy in surface adhesion.

Journal Article↗
PubMed2004

Electrons are transported through phenylene-ethynylene oligomer monolayers via localized molecular orbitals.

We report excellent correlations between the first negative threshold potentials (V(TH)s) for electric conduction, electrochemical potentials, and computed lowest unoccupied molecular orbital energies in a series of phenylene-ethynylene oligomers bearing a sulfur-based anchoring unit and different electroactive substituents on the central benzene ring. The theoretical and electrochemical results strongly suggest that the peaks observed in the i-V curves have a true molecular origin and are associated with distinct unoccupied molecular levels of the compounds that are strongly localized on the central ring (except for compound I). This localization might account for the existence of a long-lived radical-anion state that permits lateral electron hopping and leads to charge trapping and storage.

Journal Article↗