Biomedical subjects

James M Tour

Publications and source records attributed to James M Tour.

At least 19 recordsLinked to original sources

PubMed2006

Single wall carbon nanotube amplification: en route to a type-specific growth mechanism.

With the desire to mass produce any specific n,m type of single wall carbon nanotube (SWNT) from a small sample of the same material, we disclose here the preliminary work directed toward that goal. The ultimate protocol would involve taking a single n,m-type nanotube sample, cutting the nanotubes in that sample into many short nanotubes, using each of those short nanotubes as a template for growing much longer nanotubes of the same type, and then repeating the process. The result would be an amplification of the original tube type: a parent SWNT serving as the prolific progenitor of future identical SWNT types. As a proof-of-concept, we use here a short SWNT seed as a template for vapor liquid solid (VLS) amplification growth of an individual long SWNT. The original short SWNT seed was a polymer-wrapped SWNT, end-carboxylated, and further tethered with Fe salts at its ends. The Fe salts were to act as the growth catalysts upon subsequent reductive activation. Deposition of the short SWNT-Fe tipped species upon an oxide surface was followed by heating in air to consume the polymer wrappers, then reducing the Fe salts to Fe(0) under a H2-rich atmosphere. During this heating, the Fe(0) can etch back into the short SWNT so that the short SWNT acts as a template for new growth to a long SWNT that occurs upon introduction of C2H4 as a carbon source. Analysis indicated that the templated VLS-grown long SWNT had the same diameter and surface orientation as the original short SWNT seed, although amplifying the original n,m type remains to be proven. This study could pave the way for an amplified growth process of SWNTs en route to any n,m tube type synthesis from a starting sample of pure nanotubes.

Journal Article↗

PubMed2006

Electrochemical origin of voltage-controlled molecular conductance switching.

We have studied electron transport in bipyridyl-dinitro oligophenylene-ethynelene dithiol (BPDN) molecules both in an inert environment and in aqueous electrolyte under potential control, using scanning tunneling microscopy. Current-voltage (IV) data obtained in an inert environment were similar to previously reported results showing conductance switching near 1.6 V. Similar measurements taken in electrolyte under potential control showed a linear dependence of the bias for switching on the electrochemical potential. Extrapolation of the potentials to zero switching bias coincided with the potentials of redox processes on these molecules. Thus switching is caused by a change in the oxidation state of the molecules.

Electrochemistry↗

PubMed2006

Controlled modulation of conductance in silicon devices by molecular monolayers.

We have controllably modulated the drain current (I(D)) and threshold voltage (V(T)) in pseudo metal-oxide-semiconductor field-effect transistors (MOSFETs) by grafting a monolayer of molecules atop oxide-free H-passivated silicon surfaces. An electronically controlled series of molecules, from strong pi-electron donors to strong pi-electron acceptors, was covalently attached onto the channel region of the transistors. The device conductance was thus systematically tuned in accordance with the electron-donating ability of the grafted molecules, which is attributed to the charge transfer between the device channel and the molecules. This surface grafting protocol might serve as a useful method for controlling electronic characteristics in small silicon devices at future technology nodes.

Journal Article↗

PubMed2006

Characterization of self-assembled monolayers of fullerene derivatives on gold surfaces: implications for device evaluations.

The widely employed approach to self-assembly of fullerene derivatives on gold can be complicated due to multilayer formations and head-to-tail assemblies resulting from the strong fullerene-fullerene and fullerene-gold interactions. These anomalies were not examined in detail in previous studies on fullerene self-assembled monolayers (SAMs) but were clearly detected in the present work using surface characterization techniques including ellipsometry, cyclic voltammetry (CV), and X-ray photoelectron spectroscopy (XPS). This is the first time that SAMs prepared from fullerene derivatives of thiols/thiol esters/disulfides have been analyzed in detail, and the complications due to multilayer formations and head-to-tail assemblies were revealed. Specifically, we designed and synthesized several fullerene derivatives based on thiols, thiol acetates, and disulfides to address the characterization requirements, and these are described and delineated. These studies specifically address the need to properly characterize and control fullerene-thiol assemblies on gold before evaluating subsequent device performances.

Journal Article↗

PubMed2006

Effects of hydration on molecular junction transport.

The study of charge transport through increasingly complex small molecules will benefit from a detailed understanding of how contaminants from the environment affect molecular conduction. This should provide a clearer picture of the electronic characteristics of molecules by eliminating interference from adsorbed species. Here we use magnetically assembled microsphere junctions incorporating thiol monolayers to provide insight into changing electron transport characteristics resulting from exposure to air. Using this technique, current-voltage analysis and inelastic electron tunnelling spectroscopy (IETS) demonstrate that the primary interaction affecting molecular conduction is rapid hydration at the gold-sulphur contacts. We use IETS to present evidence for changing mechanisms of charge transport as a result of this interaction. The detrimental effects on molecular conduction discussed here are important for understanding electron transport through gold-thiol molecular junctions once exposed to atmospheric conditions.

Electrochemistry↗

PubMed2006

Functionalization of single-walled carbon nanotubes "on water".

Single-walled carbon nanotubes (SWNTs) are exfoliated and functionalized into small bundles and individuals by vigorous stirring "on water" in the presence of a substituted aniline and an oxidizing agent. This is an example of an "on water" reaction that leads to functionalized SWNTs, and it represents a "green", or environmentally friendly, process. A variety of reaction conditions were explored. The products were analyzed with Raman, UV-vis-NIR, and X-ray photoelectron spectroscopies, atomic force and transmission electron microscopies, and thermogravimetric analysis.

Journal Article↗

PubMed2006

Recent progress on nanovehicles.

Nanovehicles are a new class of molecular machines consisting of a molecular scale chassis, axles, and wheels, that can roll across solid surfaces with structurally defined directions making them of interest to synthetic chemists, surface scientists, chemical engineers, and the general car enthusiast. In this tutorial review, following a brief introduction to the development of nanomachines, our recent progress on the nanovehicle project is presented including the design, synthesis, and testing of a series of nanocars, nanotrucks, and motorized nanocars.

Journal Article↗

PubMed2006

Soluble ultra-short single-walled carbon nanotubes.

Soluble, ultra-short (length < 60 nm), carboxylated, single-walled carbon nanotubes (SWNTs) have been prepared by a scalable process. This process, predicated on oleum's (100% H2SO4 with excess SO3) ability to intercalate between individual SWNTs inside SWNT ropes, is a procedure that simultaneously cuts and functionalizes SWNTs using a mixture of sulfuric and nitric acids. The solubility of these ultra-short SWNTs (US-SWNTs) in organic solvents, superacid and water is about 2 wt %. The availability of soluble US-SWNTs could open opportunities for forming high performance composites, blends, and copolymers without inhibiting their processibility.

Microscopy, Electron, Scanning↗

PubMed2006

A study of the formation, purification and application as a SWNT growth catalyst of the nanocluster [HxPMo12O40[subset]H4Mo72Fe30(O2CMe)15O254(H2O)98].

The synthetic conditions for the isolation of the iron-molybdenum nanocluster FeMoC [HxPMo12O40 [subset]H4Mo72Fe30(O2CMe)15O254(H2O)98], along with its application as a catalyst precursor for VLS growth of SWNTs have been studied. As-prepared FeMoC is contaminated with the Keplerate cage [H4Mo72Fe30(O2CMe)15O254(H2O)98] without the Keggin [HxPMo12O40]n- template, however, isolation of pure FeMoC may be accomplished by Soxhlet extraction with EtOH. The resulting EtOH solvate is consistent with the replacement of the water ligands coordinated to Fe being substituted by EtOH. FeMoC-EtOH has been characterized by IR, UV-vis spectroscopy, MS, XPS and 31P NMR. The solid-state 31P NMR spectrum for FeMoC-EtOH (delta-5.3 ppm) suggests little effect of the paramagnetic Fe3+ centers in the Keplerate cage on the Keggin ion's phosphorous. The high chemical shift anisotropy, and calculated T1 (35 ms) and T2 (8 ms) values are consistent with a weak magnetic interaction between the Keggin ion's phosphorus symmetrically located within the Keplerate cage. Increasing the FeCl2 concentration and decreasing the pH of the reaction mixture optimizes the yield of FeMoC. The solubility and stability of FeMoC in H2O and MeOH-H2O is investigated. The TGA of FeMoC-EtOH under air, Ar and H2 (in combination with XPS) shows that upon thermolysis the resulting Fe : Mo ratio is highly dependent on the reaction atmosphere: thermolysis in air results in significant loss of volatile molybdenum components. Pure FeMoC-EtOH is found to be essentially inactive as a pre-catalyst for the VLS growth of single-walled carbon nanotubes (SWNTs) irrespective of the substrate or reaction conditions. However, reaction of FeMoC with pyrazine (pyz) results in the formation of aggregates that are found to be active catalysts for the growth of SWNTs. Activation of FeMoC may also be accomplished by the addition of excess iron. The observation of prior work's reported growth of SWNTs from FeMoC is discussed with respect to these results.

Journal Article↗

PubMed2006

En route to a motorized nanocar.

[structure: see text] With the eventual goal of demonstrating a motorized nanocar, the key structure has been synthesized which bears a light-activated unidirectional molecular motor and an oligo(phenylene ethynylene) chassis and axle system with four carboranes to serve as the wheels. Kinetics studies in solution show that the motor indeed rotates upon irradiation with 365 nm light, and the fullerene-free carborane wheel system is an essential design feature for motor operation.

Journal Article↗

PubMed2006

Surface-rolling molecules.

Design, syntheses, and testing of new, fullerene-wheeled single molecular nanomachines, namely, nanocars and nanotrucks, are presented. These nanovehicles are composed of three basic components that include spherical fullerene wheels, freely rotating alkynyl axles, and a molecular chassis. The use of spherical wheels based on C60 and freely rotating axles based on alkynes permits directed nanoscale rolling of the molecular structure on gold surfaces. The rolling motion observed by STM resembles the same motion performed by macroscopic entities in which rolling occurs perpendicular to the axles. A new synthesis methodology, in situ ethynylation of fullerenes, was developed for the realization of the fullerene-wheeled molecular machines. Four generations of the fullerene-wheeled structures were developed, and the latest fourth generation nanocar, 3b, along with three-wheeled triangular compounds, 4a and 4b, provided definitive evidence for fullerene-based wheel-like rolling motion, not stick-slip or sliding translation. The studies here underscore the ability to control directionality of motion in molecular-sized nanostructures through precise molecular design and synthesis.

Journal Article↗

PubMed2006

Neutral complexes of first row transition metals bearing unbound thiocyanates and their assembly on metallic surfaces.

A series of transition metal coordination complexes designed to assemble on gold surfaces was synthesized, their electronic structure and transitions analyzed, and their magnetic properties studied. By taking advantage of recently developed thiocyanate assembly protocols, these molecules were then assembled onto a gold surface, without the need for an inert atmosphere, to give a loosely packed monolayer. The assembled molecules exhibit properties similar to that of the bulk molecules, indicating little change in molecular structure outside of chemisorption.

Journal Article↗

PubMed2006

Molecular engineering and measurements to test hypothesized mechanisms in single molecule conductance switching.

Six customized phenylene-ethynylene-based oligomers have been studied for their electronic properties using scanning tunneling microscopy to test hypothesized mechanisms of stochastic conductance switching. Previously suggested mechanisms include functional group reduction, functional group rotation, backbone ring rotation, neighboring molecule interactions, bond fluctuations, and hybridization changes. Here, we test these hypotheses experimentally by varying the molecular designs of the switches; the ability of the molecules to switch via each hypothetical mechanism is selectively engineered into or out of each molecule. We conclude that hybridization changes at the molecule-surface interface are responsible for the switching we observe.

Journal Article↗

PubMed2006

Injectable nanocomposites of single-walled carbon nanotubes and biodegradable polymers for bone tissue engineering.

We have investigated the dispersion of single-walled carbon nanotubes (SWNTs) and functionalized SWNTs (F-SWNTs) in the unsaturated, biodegradable polymer poly(propylene fumarate) (PPF) and examined the rheological properties of un-cross-linked nanocomposite formulations as well as the electrical and mechanical properties of cross-linked nanocomposites. F-SWNTs were produced from individual SWNTs by a diazonium-based method and dispersed better than unmodified SWNTs in both un-cross-linked and cross-linked PPF matrix. Cross-linked nanocomposites with F-SWNTs were superior to those with unmodified SWNTs in terms of their mechanical properties. Specifically, nanocomposites with 0.1 wt % F-SWNTs loading resulted in a 3-fold increase in both compressive modulus and flexural modulus and a 2-fold increase in both compressive offset yield strength and flexural strength when compared to pure PPF networks, whereas the use of 0.1 wt % SWNTs gained less than 37% mechanical reinforcement. These extraordinary mechanical enhancements considered together with Raman scattering and sol fraction measurements indicate strong SWNT-PPF interactions and increased cross-linking densities resulting in effective load transfer. With enhanced mechanical properties and capabilities of in situ injection and cross-linking, these SWNT/polymer nanocomposites hold significant implications for the fabrication of bone tissue engineering scaffolds.

Biocompatible Materials↗

PubMed2006

Biocompatibility of native and functionalized single-walled carbon nanotubes for neuronal interface.

Single-walled carbon nanotubes (SWNTs) have unique mechanical, electrical, and optical properties and can be easily chemically modified; features that make them excellent candidate materials for applications as sensors and stimulators in neuronal tissue engineering. The purpose of this study was to demonstrate that SWNTs can support neuronal attachment and growth, that simple chemical modifications can be employed to control cell growth, that SWNTs do not interfere with ongoing neuronal function, and that neurons can be electrically coupled to SWNTs. Growth and attachment of the neuroblastoma*glioma NG108, a model neuronal cell, was assessed on unmodified SWNT substrates or substrates from SWNTs modified with 4-benzoic acid or 4-tert-butylphenyl functional groups using a simple functionalization method. SWNT films support cell growth, but at a reduced level compared to tissue culture-treated polystyrene. The order of viability and cell attachment was tissue culture treated polystyrene > SWNTs > 4-tert-butylphenyl-functionalized SWNTs > 4-benzoic acid-functionalized SWNTs. Decreased cell growth after culture on untreated (non adherent) polystyrene suggested that cell attachment was a critical determinant of proliferation and cell growth on SWNTs. Fluorescence and scanning electron microscopy revealed decreased neurite outgrowth in NG108 grown on SWNT substrates. We are also among the first groups to demonstrate electrical coupling of SWNTs and neurons by demonstrating that NG108 and rat primary peripheral neurons showed robust voltage-activated currents when electrically stimulated through transparent, conductive SWNT films. Our data suggest that SWNTs are flexible resource materials for tissue engineering application involving electrically excitable tissues such as muscles and nerves.

Action Potentials↗

PubMed2005

Molecular engineering of the polarity and interactions of molecular electronic switches.

We have investigated and learned to control switching of oligo(phenylene ethynylene)s embedded in amide-containing alkanethiol self-assembled monolayers on Au{111}. We demonstrate bias-dependent switching of the oligo(phenylene ethynylene)s as a function of the interaction between the dipole moment of the oligo(phenylene ethynylene)s and the electric field applied between the scanning tunneling microscope tip and the substrate. We are able to invert the polarity of the switches by altering their design-inverting their dipole moments. For appropriately designed switches and matrix molecules, the conductance states are stabilized by intermolecular hydrogen bonding. These results further support the hypothesis that conductance switching in these molecules is due to hybridization changes at the molecule-substrate bonds due to tilting of the switch molecules.

Journal Article↗

PubMed2005

Metal-free silicon-molecule-nanotube testbed and memory device.

Work from several laboratories has shown that metal nanofilaments cause problems in some molecular electronics testbeds. A new testbed for exploring the electrical properties of single molecules has been developed to eliminate the possibility of metal nanofilament formation and to ensure that molecular effects are measured. This metal-free system uses single-crystal silicon and single-walled carbon nanotubes as electrodes for the molecular monolayer. A direct Si-arylcarbon grafting method is used. Use of this structure with pi-conjugated organic molecules resulted in a hysteresis loop with current-voltage measurements that are useful for an electronic memory device. The memory is non-volatile for more than 3 days, non-destructive for more than 1,000 reading operations and capable of more than 1,000 write-erase cycles before device breakdown. Devices without pi-conjugated molecules (Si-H surface only) or with long-chain alkyl-bearing molecules produced no hysteresis, indicating that the observed memory effect is molecularly relevant.

Computer Storage Devices↗

PubMed2005

Relative conductances of alkaneselenolate and alkanethiolate monolayers on Au{111}.

The electronic properties of alkanethiolate [CH3(CH2)nS-, n = 9 and 11] and alkaneselenolate [CH3(CH2)nSe-, n = 9 and 11] self-assembled monolayers on Au{111} have been quantitatively compared. Simultaneously acquired apparent tunneling barrier height (ATBH) and scanning tunneling microscopy (STM) images reveal that alkanethiolate molecules have a lower barrier to tunneling, and therefore a higher conductance than alkaneselenolates of the same alkyl chain length. Molecular and contact conductance differences were elucidated by using observed STM topographic tunneling height differences between the analogous species. This apparent topographic difference combined with comparative ATBH data indicate that the observed decrease in conductance for alkaneselenolates compared to alkanethiolates originates exclusively from the Au-chalcogenide physical, chemical, and electronic contact.

Journal Article↗