Biomedical subjects

J Reinartz

Publications and source records attributed to J Reinartz.

At least 37 records · Page 2Linked to original sources

PubMed1994

Cyclic compression-flexion loading of the human lumbar spine.

STUDY DESIGN: The present study was designed to investigate the biomechanical behavior of the lumbar spine under controlled complex physiologic situations with chronic input. OBJECTIVE: The objective was to determine the response of the human cadaver lumbar spinal column under repetitive compression-flexion forces. SUMMARY OF BACKGROUND DATA: Studies have been conducted in the past to determine the biomechanical response of the spine under uniaxial or pure forces. There is no methodology that can be used to apply and continuously quantify the fatigue response of the lumbar spinal column under controlled combined complex loading vectors (e.g., compression flexion). METHODS: Intact cadaver lumbar columns (L1-L5) were mounted with the superior end in contact with a ball-transfer mount, inducing a flexion load to the spine while allowing multiple degrees of freedom. The distal portion of the specimen was attached to a six-axis load cell to quantify the force sustained by the specimen during the entire loading cycle. The applied load and piston deformation and the generalized six-axis force histories were gathered as a function of time using a digital data acquisition system. RESULTS: The stiffness versus number of cycles (K-N) response exhibited nonlinear characteristics. The stiffness increased initially and then stabilized after 1,000-2,000 cycles of loading, delineating the viscoelastic characteristics of the spine. The initial stiffness increase before stabilization was found to be significantly different (P < 0.025) compared to the stiffness beyond 2,000 cycles. CONCLUSIONS: The data suggest that the fatigue response can be understood by cyclically loading the ligamentous lumbar spine preparation to approximately 2,000 cycles.

Aged↗

PubMed1994

Correlation of microtrauma in the lumbar spine with intraosseous pressures.

This study was conducted to determine the relationship between intraosseous pressure and vertebral microtrauma in the lumbar spine. Functional spinal units were excised from human cadavers. Radio-opaque dye was injected into the nucleus. Miniature transducers were inserted into the vertebrae to record intraosseous pressures. Compressive loading was applied quasistatically (2 mm/sec) until injury occurred. Movement of the contrast medium was monitored under fluoroscopy. The subchondral endplate was the most vulnerable component for initiation of injury to the lumbar spine segment. In the initial stages of loading, the vertebral endplates gradually bulged outward, with the contrast medium staying within the nucleus. However, at higher physiologic load levels, before reaching the limiting load, the deformations increased, resulting in buckling of one of the endplates. This was followed by the contrast medium impregnating the spongiosa. Microlevel trauma was not observed radiographically after load removal, indicating that one cannot always equate a normal radiograph with normal spinal anatomy. Mean forces, deformations, stiffnesses, energies, and strains were 7.8 kN (+/- 1.4), 5.23 mm (+/- 0.78), 1940 N/mm (+/- 226), 18.7 J (+/- 4.4), and 35.5% (+/- 3.7), respectively. Pressure in the vertebral body containing the injured endplate before the onset of microtrauma was different (P < 0.05) from the pressure after injury; the pressures in the body containing the intact endplate, however, were not statistically different. Significant differences (P < 0.05) in the intraosseous pressures occurred between the two spinal levels at low-level physiologic loads before the onset of microtrauma.(ABSTRACT TRUNCATED AT 250 WORDS)

Adult↗

PubMed1994

The receptor for urokinase-type plasminogen activator of a human keratinocyte line (HaCaT).

It is assumed that plasmin participates in pericellular proteolysis in the epidermis. Plasmin is generated by keratinocyte-associated plasminogen activators from the proenzyme plasminogen; plasminogen activation can proceed at the keratinocyte surface. The resultant plasmin interferes with cell to matrix adhesion and does possibly contribute to keratinocyte migration during reepithelialization. Here we describe the receptor for urokinase-type plasminogen activator (uPA-R) in the human keratinocyte cell line HaCaT, which serves to direct plasminogen activation to the cell surface; we relate the receptor to the uPA-R previously described in human myelo-/monocytes. Binding of uPA to the receptor accelerated plasminogen activation by a factor of approximately 10, compared to uPA in solution. Receptor-bound uPA was susceptible to inhibition by the plasminogen activator inhibitors 1 and 2. uPA and uPA-R antigen, as well as uPA activity, were localized to the leading front of expanding sheets of HaCaT cells. Exposure of HaCaT cells to plasminogen was followed by detachment of the cells. Detachment was prevented by an anticatalytic anti-uPA antibody, by the plasmin-specific inhibitor aprotinin, and by the lysine analogue tranexamic acid, the latter of which prevents plasmin(ogen) binding to the cell surface. Our findings support the hypothesis that uPA-mediated plasminogen activation is characteristic of mobile rather than sessile keratinocytes. Moreover, the uPA-R seems to focalize plasminogen activation to the surface of cells at the site of keratinocyte migration.

Base Sequence↗

PubMed1994

Comparison of nuclear magnetic resonance spectroscopy with dual-photon absorptiometry and dual-energy X-ray absorptiometry in the measurement of thoracic vertebral bone mineral density: compressive force versus bone mineral.

31P nuclear magnetic resonance spectroscopy (NMRS) measurements were made on human T2 and T3 vertebral bodies. The bone mineral content (BMC) of isolated vertebral bodies minus the posterior elements and disks was measured using (1) NMRS on a 3.5 T, 85 mm bore GE Medical Systems NT-150 superconducting spectrometer, (2) a Lunar Corporation DPX-L dual-energy X-ray absorptiometry (DXA) scanner in an anterior-posterior (AP) orientation, (3) a Norland Corporation XR26 DXA scanner, also in an AP direction, and (4) a Norland Corporation model 2600 dual-photon absorptiometry (DPA) densitometer in both the AP and superior-inferior (SI) directions. Vertebral body volumes were measured using a water displacement technique to determine volume bone mineral densities (VBMD). They were then compressed to failure using an electrohydraulic testing device, followed by ashing in a muffle furnace at 700 degrees C for 18 h. Correlations of BMC between NMRS and DPA, DXA and ashing were excellent (0.96 < or = r < or = 0.99); in a one-way analysis of variance (ANOVA) test, means were not statistically different at a p level of 0.757. The correlations of VBMD between NMRS and the other methods were not as good (0.83 < or = r < or = 0.95); in a one-way ANOVA test, means were not statistically different at a p level of 0.089. BMC was a better predictor of ultimate compressive failure than VBMD for all six methods. For NMRS, the regression coefficient for BMC was r2 = 0.806, compared with r2 = 0.505 for VBMD. NMRS may prove an alternative to present methods of determining bone mineral.

Absorptiometry, Photon↗

PubMed1994

Failure of synthes anterior cervical fixation device by fracture of Morscher screws: a biomechanical study.

Anterior cervical fixation using the Synthes system has become increasingly popular. Two screw types for anchoring the plates include a "solid" titanium expansion screw and a plasma-sprayed fenestrated expansion screw that permits bony ingrowth. These screws were compared clinically and in the laboratory. In our first 20 cases using Synthes plates secured by Morscher fenestrated screws, 3 failures were observed, unilaterally in 1 patient and bilaterally in 2 others. In the unilateral screw failure, the contralateral screw was "solid" and did not fail. In the mechanical studies, screws were secured in the Synthes plate and embedded into methylmethacrylate and subjected to a sinusoidal bending moment to the mid-shaft of the screw. Load deflection data and cycles to failure were recorded. Fenestrated screws were found to demonstrate nearly twice as much deformation at failure and tolerated significantly fewer cycles to failure than did "solid" screws (p < 0.05). Because benefits of bony ingrowth into the screw are not well identified, the risks of fenestrated screw failure should preclude their routine use.

Adult↗

PubMed1994

Intravertebral pressure changes caused by spinal microtrauma.

Clinical studies indicate variations in intravertebral pressures in patients with and without low back pain. It is known that not all patients with back pain have abnormal lumbar radiographs and, furthermore, microfractures of the endplate may be one of the causes in the origin of low back pain. Consequently, this study was conducted to determine the interrelationship between microtrauma and intraosseous pressures in the lumbar spine. Miniature pressure transducers were inserted into the vertebral bodies and spinous processes of human cadaver spinal units. Radio-opaque medium was injected into the nucleus to fluoroscopically monitor the movement of the fluid from the disc as the preparation was loaded up to the initiation of microtrauma (before reaching the ultimate load-carrying capacity). The onset of injury was evidenced by the microfracture of one of the two endplates and impregnation of the contrast medium into the spongiosa. After relaxation, another cycle of loading was applied by limiting the deflections to the maximum compression sustained under the intact configuration. The load, stiffness, and energy-absorbing capacities were lower (P < 0.05) for the injured specimen compared with the intact configuration. The intraosseous pressures were higher (P < 0.05) in the vertebral body and the spinous process of the vertebra where the endplate exhibited microtrauma in the injured cycle compared with the intact cycle. In contrast, the intraosseous pressures in the vertebral body and the spinous process at the level where the endplate remained intact were not significantly different between the two cycles of loading.(ABSTRACT TRUNCATED AT 250 WORDS)

Adult↗

PubMed1994

[The autoimmune dermatosis bullous pemphigoid: deposition and activation of plasminogen in affected epidermis].

Autoimmune dermatoses are associated with antibody deposition, complement activation and subsequent tissue destruction. Plasmin-mediated proteolysis is thought to be one element of tissue destruction in autoimmune bullous dermatoses such as bullous pemphigoid. Biochemical and immunological studies on bullous pemphigoid skin blister fluid disclosed plasmin/alpha 2-antiplasmin and putative plasmin/alpha 2-macroglobulin complexes. Since the formation of plasmin/inhibitor complexes requires active plasmin, our findings indicate previous activation of plasminogen to plasmin in skin lesions.

Enzyme Activation↗

PubMed1994

Continuous motion analysis of the head-neck complex under impact.

The objective of the present study was to analyze the localized kinematic biodynamics of the human head-neck complex under impact loading. Unembalmed human cadaveric head-neck complexes were subjected to axial compressive forces delivered using an electrohydraulic testing device. The head-neck complex was aligned along the stiffest-axis; musculature was simulated using preloaded springs and cables; and retroreflective targets were inserted into the vertebral body, the facet joint articulation, and the spinous process at every level of the cervical column. At dynamic loading rates (1.8-5.1 m/min), mid to lower cervical spine injuries consistently occurred in these preparations. Continuous motion analysis of the components (vertebral body, intervertebral disk, facet joint, and the spinous process) at all levels of the cervical spine showed the temporal order of the transfer of the external load. Injuries documented by computed tomography and cryomicrotomy techniques correlated with the kinematics of the structure. The application of dynamic loading to the head-neck complex coupled with high-speed, continuous-motion analysis of the intervertebral components of the entire cervical column makes possible the definition of the temporal kinematic mechanics that are fundamental to the understanding of the biodynamics of cervical spine trauma. Using these procedures, we have correlated the kinematics with the onset and pattern of neck injury secondary to impact forces.

Aged↗

PubMed1993

Enzyme-linked immunosorbent assays for plasminogen activators.

ELISA procedures are described for the quantitative analysis of the urokinase-type plasminogen activator (uPA) and of the tissue type PA (tPA). The assays were developed to detect the respective type of PA in cell culture supernatants. TPA can be present as a single-chain or a two-chain protein; uPA as pro-uPA, high or low molecular weight uPA, respectively. In addition, both PAs can be complexed with the plasminogen activator inhibitors PAI-I or PAI-2. Monoclonal antibodies specific for uPA or tPA were selected that recognized the distinct molecular forms of the PAs, even in the presence of fetal calf serum, which is a common--relatively ill-defined--ingredient of cell culture media. The test systems were found to be reliable, easy to perform, and to permit the detection of both types of PA in serum-free and serum-containing cell culture supernatants. Finally, the ELISA--in combination with functional tests--were used to analyse the different PA components in culture supernatants of uPA- or tPA-producing cell lines.

Animals↗

PubMed1993

Kinematics of the lumbar spine following pedicle screw plate fixation.

This investigation was conducted to determine the kinematic response of the lumbar spine instrumented with transpedicular screws and plates. Seven unembalmed human cadaveric lumbar spines were used. Retroreflective targets were inserted into the bony landmarks of each vertebral body, facet column, and spinous process. The specimen was quasistatically loaded until failure (initial cycle) using an electrohydraulic testing device at a rate of 2.5 mm/sec. After radiography, the specimen was again loaded (injury cycle) to the failure compression determined in the previous cycle. Transpedicular screws then were inserted bilaterally at one level proximal and distal to injury. The stabilized cycle of loading was conducted using the procedure adopted in the injury cycle. Comparative analysis of the localized kinematic data between the stabilized and injured columns indicated a reduction in motion between fixated levels, increasing the rigidity of the column. At levels proximal and distal to fixation, however, motion increased, indicating added flexibility. These alterations in the motion, observed during single-cycle loading, may be further accentuated in vivo, leading to hypermobility and degeneration of the spine.

Adult↗

PubMed1993

Binding and activation of plasminogen at the surface of human keratinocytes.

Plasmin is thought to be involved in the pericellular proteolysis of the human epidermis under physiological and pathological conditions. Plasmin is provided by activation of the proenzyme plasminogen. We have explored in vitro whether plasminogen is bound and activated at the keratinocyte surface, a possible mechanism for providing plasmin in the pericellular space. Plasminogen and plasmin could be eluted from the surface of keratinocytes grown in serum-containing medium. When plasminogen was added to cultured keratinocytes it was activated by cell-associated urokinase-type plasminogen activator. The activation required plasminogen binding to the cell surface. Plasminogen binding by keratinocytes was saturable and proceeded in a time- and concentration-dependent manner. Surface-bound plasmin was rapidly displaced from the surface into the culture supernatant. When compared to plasmin in solution surface-bound plasmin was relatively protected from interaction with the specific inhibitor alpha 2-antiplasmin. Addition of exogenous plasmin or plasmin generation by the keratinocyte-associated plasminogen activators was ensued by the detachment of adherent keratinocytes in culture. Along the same line, plasmin counteracted keratinocyte adhesion to fibrin-coated but not to collagen-coated culture plates. The findings indicate that plasmin may be generated in the pericellular space of keratinocytes and may interfere with the adhesion to particular extracellular substrates.

Cell Adhesion↗

PubMed1993

Plasminogen activation in lesional skin of Pemphigus vulgaris type Neumann.

Zymographic and immunological studies revealed that primarily tissue-type plasminogen activator and to a lesser extent urokinase-type plasminogen activator were present in fluids of pemphigus vulgaris (type Neumann) skin blisters. Furthermore, plasmin activity was detected in pemphigus blister fluids using chromogenic peptide substrate assays. In pemphigus, but not in control, suction blister fluids plasmin/alpha 2-antiplasmin and plasmin/alpha 2-macroglobulin complexes were found by immunoprecipitation or by testing in immunoassays after fractionation by molecular-sieve chromatography. Plasmin activity, detected by a low molecular weight chromogenic peptide assay, was ascribed to plasmin/alpha 2-macroglobulin complexes. Since formation of plasmin/inhibitor complexes requires active plasmin, the finding indicates previous activation of plasminogen in pemphigus lesions.

Antifibrinolytic Agents↗

PubMed1993

A biomechanical impact test system for head and facial injury assessment and model development.

A biomechanical test system has been developed and validated to conduct controlled uniaxial impact experiments of head and facial trauma. The design reduces off-axis accelerations which are not in the direction of impact and allows accurate positioning of test specimens. Impact forces, displacement histories, impulses at impact and spectral responses are compared to free-fall test results at contact velocities representative of facial injuries (2.5, 3.1 and 3.8 m s-1). Models based on the experimental results are developed to reveal stiffness and inertial properties of impact for use in the design of biomechanically protective steering wheels, air bags and other potential impact structures. The results indicate that the system provides a flexible yet controllable method for positioning and testing impact structures reliably.

Accidents, Traffic↗

PubMed1993

Effects of anterior vertebral grafting on the traumatized lumbar spine after pedicle screw-plate fixation.

This study was conducted to determine the effects of corpectomy and anterior strut grafting on the biomechanics of traumatized lumbar spine after pedicle screw-plate fixation. Eight lumbar spines were loaded until fracture (initial cycle) and then reloaded to the same deformation (injury cycle). After transpedicular fixation, spines were again loaded (fixation cycle). Partial corpectomy of the fractured body and anterior strut grafting were accomplished; the spine reloaded (strut cycle). Spine angles were measured and biomechanical strength and kinematic parameters analyzed. Load-deformation relationships were similar for fixation and strut cycles until maximum load; at failure, loads were higher for the former (P < 0.05), however. Alignment was improved by stabilization or stabilization plus anterior grafting (P < 0.05). Vertebral height was best maintained by grafting as an adjunct to pedicle fixation (P < 0.05). Kinematics were largely unaffected by grafting, except for reduced motion at the posterior vertebral targets between the fixated levels (P < 0.05). The strength of the fixated spine is relatively unchanged by corpectomy and anterior grafting; alignment may be improved in the latter group.

Biomechanical Phenomena↗

PubMed1993

The autoimmune blistering skin disease bullous pemphigoid. The presence of plasmin/alpha 2-antiplasmin complexes in skin blister fluid indicates plasmin generation in lesional skin.

Plasminogen activators produced locally in the skin have been implicated in blistering skin diseases. To explore whether plasminogen activators convert their substrate plasminogen into plasmin locally in the lesional skin we have analyzed the autoimmune blistering skin disease bullous pemphigoid. Enzyme activity was detected in bullous pemphigoid skin blister fluid by using a low molecular weight chromogenic substrate for plasmin. Enzyme activity was detected neither in suction blister fluid raised on normal skin nor in normal plasma. Immunoprecipitation or fractionation by molecular sieve chromatography of bullous pemphigoid skin blister fluid followed by testing in immunoassays disclosed putative plasmin/alpha 2-macroglobulin complexes and plasmin/alpha 2-antiplasmin complexes. Enzyme activity detected in bullous pemphigoid skin blister fluid by the low molecular weight chromogenic peptide assay was ascribed to the putative plasmin pha 2-macroglobulin complexes. Because formation of plasmin-inhibitor complexes requires the active plasmin, our findings indicate previous activation of plasminogen to plasmin in skin lesions. There was no evidence for free plasmin (i.e., plasmin not complexed to inhibitors) in bullous pemphigoid blister fluid, suction blister fluid, or plasma.

Amino Acid Sequence↗

PubMed1993

Biomechanical evaluation of Caspar cervical screws: comparative stability under cyclical loading.

Anterior cervical instrumentation is used as an adjunct to bone fusion; however, definitive biomechanical data to support some applications and techniques are lacking. In the absence of supportive experimental data, posterior cortical penetration has been recommended with the Caspar system. Previously, we compared the axial pull-out strength of Caspar screws with and without posterior cortical penetration. This study compares the stability of unicortical versus bicortical screw penetration groups under cyclical loading simulating physiological flexion-extension. Caspar screws were placed in human cadaveric vertebrae with or without posterior cortical purchase. Each screw was separately tested, simulating flexion-extension to 200 cycles. Deformation time data allowed a direct comparison of screw "wobble" with and without posterior cortical purchase. The mean deformation differences between subcortical and bicortical groups were statistically significant and increased over time within both groups. Enhanced stability was noted with bicortical purchase throughout most of the examined range, becoming more pronounced over longer periods of cyclical loading. Significant (P < 0.05) increases in deformation over time were noted for both groups, suggesting potentially significant deterioration at the screw-bone interface, despite bicortical purchase. Such deterioration with repeated flexion-extension loading may be of concern in the use of Caspar plates in the presence of multicolumn instability.

Absorptiometry, Photon↗

PubMed1993

Energy absorption characteristics of football helmets under low and high rates of loading.

The purpose of this study was to examine the force-deformation characteristics of football helmets subjected to compressive loading on the crown surface. Tests were conducted at quasi-static and dynamic rates of loading. Energies were computed from the force-deformation data. The padding systems represented by the helmets differed in their ability to absorb energy under varying loading rates. Helmets using pneumatic or combination pneumatic-foam padding systems were the most successful while suspension helmets were able to absorb the least amount of energy. The evaluation of energy absorption characteristics is an alternative method of describing the effectiveness of football helmets in preventing head injury.

Acceleration↗

PubMed1992

The biomechanics of lumbar facetectomy under compression-flexion.

Alterations of posterior spinal elements including the facet joints are commonly associated with a variety of lumbar operative procedures. Under continuous physiologic compression-flexion load application L2-L3 and L4-L5 functional units were tested as intact preparations and then sequentially altered with unilateral facetectomy, bilateral facetectomy, posterior ligament transection, and partial discectomy. Using a method of continuous motion analysis, the movement of the individual spinal components (disc, facet joint, interspinous process distance) were statistically compared between the various surgical alterations. Higher physiologic loads produced significant increases in overall deflection from BF to BFL alterations indicating a preference to preserve the posterior ligaments for this surgical approach. Although insignificant changes in the force-deflection response from one surgical alteration to the next sequential alteration were noted, statistically significant increases in localized facet joint motion may suggest the potential for acceleration of segmental degenerative changes.

Aged↗