Introductory remarks and some biochemical considerations.
Explore the source record for details and available documents.
Dictyostelium↗
Biomedical subjects
J A Spudich
Publications and source records attributed to J A Spudich.
Myosin light chain kinase and myosin light chain phosphatase from Dictyostelium: effects of reversible phosphorylation on myosin structure and function.
We have partially purified myosin light chain kinase (MLCK) and myosin light chain phosphatase (MLCP) from Dictyostelium discoideum. MLCK was purified 4,700-fold with a yield of approximately 1 mg from 350 g of cells. The enzyme is very acidic as suggested by its tight binding to DEAE. Dictyostelium MLCK has an apparent native molecular mass on HPLC G3000SW of approximately 30,000 D. Mg2+ is required for enzyme activity. Ca2+ inhibits activity and this inhibition is not relieved by calmodulin. cAMP or cGMP have no effect on enzyme activity. Dictyostelium MLCK is very specific for the 18,000-D light chain of Dictyostelium myosin and does not phosphorylate the light chain of several other myosins tested. Myosin purified from log-phase amebas of Dictyostelium has approximately 0.3 mol Pi/mol 18,000-D light chain as assayed by glycerol-urea gel electrophoresis. Dictyostelium MLCK can phosphorylate this myosin to a stoichiometry approaching 1 mol Pi/mol 18,000-D light chain. MLCP, which was partially purified, selectively removes phosphate from the 18,000-D light chain but not from the heavy chain of Dictyostelium myosin. Phosphatase-treated Dictyostelium myosin has less than or equal to 0.01 mol Pi/mol 18,000-D light chain. Phosphatase-treated myosin could be rephosphorylated to greater than or equal to 0.96 mol Pi/mol 18,000-D light chain by incubation with MLCK and ATP. We found myosin thick filament assembly to be independent of the extent of 18,000-D light-chain phosphorylation when measured as a function of ionic strength. However, actin-activated Mg2+-ATPase activity of Dictyostelium myosin was found to be directly related to the extent of phosphorylation of the 18,000-D light chain. MLCK-treated myosin moved in an in vitro motility assay (Sheetz, M. P., and J. A. Spudich, 1983, Nature (Lond.), 305:31-35) at approximately 1.4 micron/s whereas phosphatase-treated myosin moved only slowly or not at all. The effects of phosphatase treatment on the movement were fully reversed by subsequent treatment with MLCK.
Alkaline Phosphatase↗
Expression in Escherichia coli of a functional Dictyostelium myosin tail fragment.
The amino acid sequence of the myosin tail determines the specific manner in which myosin molecules are packed into the myosin filament, but the details of the molecular interactions are not known. Expression of genetically engineered myosin tail fragments would enable a study of the sequences important for myosin filament formation and its regulation. We report here the expression in Escherichia coli of a 1.5-kb fragment of the Dictyostelium myosin heavy chain gene coding for a 58-kD fragment of the myosin tail. The expressed protein (DdLMM-58) was purified to homogeneity from the soluble fraction of E. coli extracts. The expressed protein was found to be functional by the following criteria: (a) it appears in the electron microscope as a 74-nm-long rod, the predicted length for an alpha-helical coiled coil of 500 amino acids; (b) it assembles into filamentous structures that show the typical axial periodicity of 14 nm found in muscle myosin native filaments; (c) its assembly into filaments shows the same ionic strength dependence as Dictyostelium myosin; (d) it serves as a substrate for the Dictyostelium myosin heavy chain kinase which phosphorylates myosin in response to chemotactic signaling; (e) in its phosphorylated form it has the same phosphoamino acids and similar phosphopeptide maps to those of phosphorylated Dictyostelium myosin heavy chain; (f) it competes with myosin for the heavy chain kinase. Thus, all the information required for filament formation and phosphorylation is contained within this expressed protein.
Dictyostelium↗
Myosin structure and function in cell motility.
Explore the source record for details and available documents.
Amino Acid Sequence↗
Myosin movement in vitro: a quantitative assay using oriented actin cables from Nitella.
Explore the source record for details and available documents.
Actins↗
Fluorescent actin filaments move on myosin fixed to a glass surface.
Single actin filaments stabilized with fluorescent phalloidin exhibit ATP-dependent movement on myosin filaments fixed to a surface. At pH 7.4 and 24 degrees C, the rates of movement average 3-4 micron/s with skeletal muscle myosin and 1-2 micron/s with Dictyostelium myosin. These rates are very similar to those measured in our previous myosin movement assays. The rates of movement are relatively independent of the type of actin used. The filament velocity shows a broad pH optimum between 7.0 and 9.0, and the concentration of ATP required for half-maximal velocity is 50 microM. Evidence was obtained to suggest that movement of actin over myosin requires at most the number of heads in a single thick filament. This system provides a practical, quantitative myosin-movement assay with purified proteins.
Actins↗
Conserved protein domains in a myosin heavy chain gene from Dictyostelium discoideum.
The 2116-amino acid myosin heavy chain sequence from Dictyostelium discoideum was determined from DNA sequence analysis of the cloned gene. The gene product can be divided into two distinct regions, a globular head region and a long alpha-helical, rod-like tail. In comparisons with nematode and mammalian muscle myosins, specific areas of the head region are highly conserved. These areas presumably reflect conserved functional and structural domains. Certain features that are present in the head region of nematode and mammalian muscle myosins, and that have been assumed to be important for myosin function, are missing in the Dictyostelium myosin sequence. The protein sequence of the Dictyostelium tail region is very poorly conserved with respect to the other myosins but displays the periodicities similar to those of muscle myosins. These periodicities are believed to play a role in filament formation. The 196-residue repeating unit that determines the 14.3-nm repeat seen in muscle thick filaments, the 28-residue charge repeating unit, and the 1,4 hydrophobic repeat previously described for the nematode myosin are all present in the Dictyostelium myosin rod sequence, suggesting that the filament structures of muscle and Dictyostelium myosins must be similar.
Adenosine Triphosphate↗
Chemoattractant-elicited increases in myosin phosphorylation in Dictyostelium.
Cyclic AMP stimulation of chemotactically competent Dictyostelium amebas labeled with [32P]orthophosphate transiently increases phosphorylation in the heavy chain and the 18,000 dalton light chain of myosin. Immediately before the increase, heavy chain phosphorylation transiently decreases. These phosphorylation changes also occur when cAMP-induced activation of adenylate cyclase is blocked by pretreatment of amebas with caffeine. The time course of these phosphorylation responses correlates with the shape changes induced in amebas exposed to a temporal increase in cAMP concentration. The dose dependence of the phosphorylation responses is the same as that previously determined for chemotaxis. The phosphorylation responses exhibit adaptation properties in common with those of the shape change response and chemotaxis. Increases in the rate of myosin heavy chain and light chain phosphorylation can be observed in vitro by stimulating unlabeled amebas with cAMP and then lysing the cells into a gamma-[32P]ATP-containing reaction mixture.
Adaptation, Physiological↗
Cloning and characterization of a nonmuscle myosin heavy chain cDNA.
Despite many biochemical and structural similarities between muscle and nonmuscle myosins, their genes appear to have completely diverged, since muscle myosin molecular clones will not hybridize to RNA from nonmuscle sources. Here we report the isolation and characterization of a partial myosin heavy chain (MHC) cDNA clone from the slime mold Dictyostelium discoideum. We have isolated this clone from a lambda gt11 expression cDNA library by antibody screening. In contrast to the highly conserved sarcomeric muscle MHC multigene families in other organisms, there appears to be only one gene encoding MHC in the Dictyostelium genome. The cloned portion of this gene does not hybridize to the genomic DNAs of other eukaryotic organisms. Analysis of the predicted amino acid sequence of the partial Dictyostelium MHC clone shows that while there is no sequence homology to known striated muscle MHCs, the structure- and coiled-coil-forming capacities have been conserved.
Amino Acid Sequence↗
Monoclonal antibodies against seven sites on the head and tail of Dictyostelium myosin.
Ten monoclonal antibodies (My1-10) against Dictyostelium discoideum myosin were prepared and characterized. Nine bound to the 210-kD heavy chain and one (My8) bound to the 18-kD light chain. They defined six topographically distinct antigenic sites of the heavy chain. Five binding sites (the My1, My5, My10 site, and the My2, My3, My4, and My9 sites) are located on the rod portion of the myosin molecule. The position of the sixth site (the My6 and My7 site) is less certain, but it appears to be near the junction of the globular heads and the rod. Three of the antibodies (My2, My3, and My6) bound to myosin filaments in solution and could be sedimented in stoichiometric amounts with the filamentous myosin. In contrast, My4, which recognized a site on the rod, inhibited the polymerization of monomeric myosin into filaments. A single antibody (My6) affected the actin-activated ATPase of myosin. The nature of the effect depended on the valency of the antibody and the myosin. Bivalent IgG and F(ab')2 fragments of My6 inhibited the actin-activated ATPase of filamentous myosin by 50% whereas univalent Fab' fragments increased the activity by 50%. The actin-activated ATPase activity of the soluble chymotryptic fragment of myosin was increased 80-90% by both F(ab')2 and Fab' of My6.
Adenosine Triphosphatases↗
Site-specific inhibition of myosin-mediated motility in vitro by monoclonal antibodies.
Monoclonal antibodies directed against seven different sites on Dictyostelium myosin (Peltz, G., J. A. Spudich, and P. Parham, 1985, J. Cell Biol., 100: 1016-1023) were tested for their ability to inhibit movement of myosin in vitro, using the Nitella-based myosin-mediated bead movement assay (Sheetz, M. P., R. Chasan, and J. A. Spudich, 1984, J. Cell Biol., 99: 1867-1871). To complement this functional assay, we located the binding sites of these antibodies by electron microscopy, using the rotary shadowing technique. One antibody bound to the 18,000-dalton light chain and inhibited movement completely. All of the remaining antibodies bound to various positions along the rod portion of the myosin molecule, which is approximately 1,800 A long. Antibodies that bound to the rod about 470, 680, and 1400 A from the head-tail junction did not alter myosin movement. One antibody appeared to bind very close to the head-tail junction and to inhibit movement 50%. Surprisingly, three antibodies that bound about 1,200 A from the head-tail junction inhibited movement completely. This inhibition did not depend on using intact IgG, since Fab' fragments had the same effect.
Antibodies, Monoclonal↗
Light chain phosphorylation regulates the movement of smooth muscle myosin on actin filaments.
In smooth muscles there is no organized sarcomere structure wherein the relative movement of myosin filaments and actin filaments has been documented during contraction. Using the recently developed in vitro assay for myosin-coated bead movement (Sheetz, M.P., and J.A. Spudich, 1983, Nature (Lond.)., 303:31-35), we were able to quantitate the rate of movement of both phosphorylated and unphosphorylated smooth muscle myosin on ordered actin filaments derived from the giant alga, Nitella. We found that movement of turkey gizzard smooth muscle myosin on actin filaments depended upon the phosphorylation of the 20-kD myosin light chains. About 95% of the beads coated with phosphorylated myosin moved at velocities between 0.15 and 0.4 micron/s, depending upon the preparation. With unphosphorylated myosin, only 3% of the beads moved and then at a velocity of only approximately 0.01-0.04 micron/s. The effects of phosphorylation were fully reversible after dephosphorylation with a phosphatase prepared from smooth muscle. Analysis of the velocity of movement as a function of phosphorylation level indicated that phosphorylation of both heads of a myosin molecule was required for movement and that unphosphorylated myosin appears to decrease the rate of movement of phosphorylated myosin. Mixing of phosphorylated smooth muscle myosin with skeletal muscle myosin which moves at 2 microns/s resulted in a decreased rate of bead movement, suggesting that the more slowly cycling smooth muscle myosin is primarily determining the velocity of movement in such mixtures.
Actins↗
Ca2+-dependent binding of severin to actin: a one-to-one complex is formed.
Severin is a protein from Dictyostelium that severs actin filaments in a Ca2+-dependent manner and remains bound to the filament fragments (Brown, S. S., K. Yamamoto, and J. A. Spudich , 1982, J. Cell Biol., 93:205-210; Yamamoto, K., J. D. Pardee , J. Reidler , L. Stryer , and J. A. Spudich , 1982, J. Cell Biol. 95:711-719). Further characterization of the interaction of severin with actin suggests that it remains bound to the preferred assembly end of the fragmented actin filaments. Addition of severin in molar excess to actin causes total disassembly of the filaments and the formation of a high-affinity complex containing one severin and one actin. This severin -actin complex does not sever actin filaments. The binding of severin to actin, measured directly by fluorescence energy transfer, requires micromolar Ca2+, as does the severing and depolymerizing activity reported previously. Once bound to actin in the presence of greater than 1 microM Ca2+, severin is not released from the actin when the Ca2+ is lowered to less than 0.1 microM by addition of EGTA. Tropomyosin, DNase I, phalloidin, and cytochalasin B have no effect on the ability of severin to bind to or sever actin filaments. Subfragment 1 of myosin, however, significantly inhibits severin activity. Severin binds not only to actin filaments, but also directly to G-actin, as well as to other conformational species of actin.
Actins↗
Monoclonal antibodies prepared against Dictyostelium actin: characterization and interactions with actin.
Three mouse monoclonal antibodies, Act I, Act II, and Act IV, against actin from the cellular slime mold Dictyostelium discoideum, have been made and characterized. All three antibodies are IgG1 and share the following properties: They form stable complexes with monomeric Dictyostelium actin, which prevents polymerization of the actin into filaments. On addition to preformed actin filaments, they cause a reduction in filament size and in the viscosity of the actin solution. They cross-react strongly with actins from the lower eucaryotes Physarum and Acanthamoeba, but not with alpha-actins from rabbit and human muscle or beta- and gamma-actins from human erythrocytes and a human B lymphoid cell line. Act II and Act IV recognize a similar antigenic determinant that is topographically distinct from that identified by Act I. In protein immunoblotting, only Act I bound strongly to Dictyostelium actin. Analysis of actin fragments with this technique showed that amino acids 13 to about 50 are required for Act I binding to actin. A comparison of the amino acid sequences of actins from lower eucaryotes and higher vertebrates implicates threonine 41 as a critical residue in the Act I antigenic site. The properties of Act II and Act IV suggest that they recognize antigenic sites involving the NH2-terminal six residues.
Actins↗
A 45,000-mol-wt protein from unfertilized sea urchin eggs severs actin filaments in a calcium-dependent manner and increases the steady-state concentration of nonfilamentous actin.
A 45,000-mol-wt protein has been purified from unfertilized sea urchin (Strongylocentrotus purpuratus) eggs. The isolation scheme includes DEAE cellulose ion-exchange chromatography, gel filtration, and hydroxylapatite chromatography. The homogeneity of the isolated protein is greater than 90% by SDS PAGE. The 45,000-mol-wt protein reduces the viscosity of actin filaments in a Ca2+-dependent manner. The free calcium concentration required for the activity of this protein is in the micromolar range. Electron microscopic studies reveal that the formation of short filaments parallels the decrease in viscosity. Energy transfer and sedimentation experiments indicate a net disassembly of actin filaments and an increase in the steady-state nonfilamentous actin concentration in the presence of Ca2+ ions and the 45,000-mol-wt protein. The increase in the steady-state nonfilamentous actin concentration is proportional to the amount of 45,000-mol-wt protein added. The actin molecules disassembled by the addition of the 45,000-mol-wt protein are capable of polymerization.
Actins↗
ATP-dependent movement of myosin in vitro: characterization of a quantitative assay.
Sheetz and Spudich (1983, Nature (Lond.), 303:31-35) showed that ATP-dependent movement of myosin along actin filaments can be measured in vitro using myosin-coated beads and oriented actin cables from Nitella. To establish this in vitro movement as a quantitative assay and to understand better the basis for the movement, we have defined the factors that affect the myosin-bead velocity. Beads coated with skeletal muscle myosin move at a rate of 2-6 micron/s, depending on the myosin preparation. This velocity is independent of myosin concentration on the bead surface for concentrations above a critical value (approximately 20 micrograms myosin/2.5 X 10(9) beads of 1 micron in diameter). Movement is optimal between pH 6.8 and 7.5, at KCl concentrations less than 70 mM, at ATP concentrations greater than 0.1 mM, and at Mg2+ concentrations between 2 and 6 mM. From the temperature dependence of bead velocity, we calculate activation energies of 90 kJ/mol below 22 degrees C and 40 kJ/mol above 22 degrees C. Different myosin species move at their own characteristic velocities, and these velocities are proportional to their actin-activated ATPase activities. Further, the velocities of beads coated with smooth or skeletal muscle myosin correlate well with the known in vivo rates of myosin movement along actin filaments in these muscles. This in vitro assay, therefore, provides a rapid, reproducible method for quantitating the ATP-dependent movement of myosin molecules on actin.
Actins↗
Movement of myosin-coated structures on actin cables.
Myosin-coated spheres from 0.6 to 120 microns in diameter move in vitro on a substratum of polar arrays of actin cables derived from the alga Nitella. The force for this movement is provided by skeletal muscle myosin since it is ATP-dependent, and N-ethylmaleimide (NEM) inactivation of the myosin blocks movement. These observations demonstrate that attachment of myosin in a random orientation to structures will enable those structures to move along polar arrays of actin filaments.
Actins↗
Ca2+-sensitive isolation of a cortical actin matrix from Dictyostelium amoebae.
A cortical actin matrix has been isolated from amoebae of Dictyostelium discoideum grown in liquid culture. The existence of this actin matrix in whole cells is indicated in electron micrographs as an area free of cytoplasmic organelles. The actin beneath the membrane is more clearly visible in sections of cells that are lysed gently with 0.5% Triton X-100 and fixed with 1% glutaraldehyde. Such Triton-lysed cells have fragments of plasma membrane associated with the cortical actin matrix. Isolation of the actin matrix, which sediments at 400 g, is inhibited by Ca2+. As much as 50% of the actin of the cell and about 12% of the total protein is found in the matrix isolated in lysis buffer containing no added Ca2+ and 2.5 mM EGTA, whereas less than 15% of the actin of the cell is recovered in a 400 g pellet when cells are lysed in buffer containing 2.5 mM Ca2+ and 2.5 mM EGTA. A 40 000 molecular weight protein that fragments F-actin in a Ca2+-dependent manner is not found in the isolated cortical actin matrix.
Actins↗