Search PubMed⌕ Search

Biomedical subjects

J A Spudich

Publications and source records attributed to J A Spudich.

At least 109 records · Page 6Linked to original sources

Developmentally regulated protein-tyrosine kinase genes in Dictyostelium discoideum.

Dictyostelium discoideum, an organism that undergoes development and that is amenable to biochemical and molecular genetic approaches, is an attractive model organism with which to study the role of tyrosine phosphorylation in cell-cell communication. We report the presence of protein-tyrosine kinase genes in D. discoideum. Screening of a Dictyostelium cDNA expression library with an anti-phosphotyrosine antibody identifies fusion proteins that exhibit protein-tyrosine kinase activity. Two distinct cDNAs were identified and isolated. Though highly homologous to protein kinases in general, these kinases do not exhibit many of the hallmarks of protein-tyrosine kinases of higher eucaryotes. In addition, these genes are developmentally regulated, which suggests a role for tyrosine phosphorylation in controlling Dictyostelium development.

Amino Acid Sequence↗

Expression and characterization of a functional myosin head fragment in Dictyostelium discoideum.

The isolated head fragment of myosin is a motor protein that is able to use energy liberated from the hydrolysis of adenosine triphosphate to cause sliding movement of actin filaments. Expression of a myosin fragment nearly equivalent to the amino-terminal globular head domain, generally referred to as subfragment 1, has been achieved by transforming the eukaryotic organism Dictyostelium discoideum with a plasmid that carries a 2.6-kilobase fragment of the cloned Dictyostelium myosin heavy chain gene under the control of the Dictyostelium actin-15 promoter. The recombinant fragment of the myosin heavy chain was purified 2400-fold from one of the resulting cell lines and was found to be functional by the following criteria: the myosin head fragment copurified with the essential and regulatory myosin light chains, decorated actin filaments, and displayed actin-activated adenosine triphosphatase activity. In addition, motility assays in vitro showed that the recombinant myosin fragment is capable of supporting sliding movement of actin filaments.

Actins↗

Capping of surface receptors and concomitant cortical tension are generated by conventional myosin.

We have investigated the role of cytoskeletal contraction in the capping of surface proteins crosslinked by concanavalin A on mutant Dictyostelium cells lacking conventional myosin. Measurements of cellular deformability to indicate the development of cortical tension show that cells of the wild-type parental strain, AX4, stiffen early during capping and relax back towards the softer resting state as the process is completed. Mutant cells lacking myosin (mhcA-) have a lower resting-state stiffness, and fail to stiffen and to cap crosslinked proteins on binding concanavalin A. Hence conventional myosin is essential both for capping and for the concomitant increase in cell stiffness. Furthermore, depletion of cellular ATP by azide causes a 'rigor' contraction in AX4 cells which makes them stiffen and become spherical. By contrast, the mhcA- cells fail to respond in these ways. These measurements of cortical tension in non-muscle cells can thus be directly correlated with the presence of conventional myosin, demonstrating that contractile tension generated by myosin can drive both a change of cell shape and the capping of crosslinked surface receptors.

Concanavalin A↗

Bidirectional movement of actin filaments along tracks of myosin heads.

It is well established that muscle contraction results from the relative sliding of actin and myosin filaments. Both filaments have definite polarities and well-ordered structures. Thick filaments, however, are not vital for supporting movement in vitro. Previously we have demonstrated that actin filaments can move continuously on myosin fragments (subfragment-1 or heavy meromyosin (HMM] that are bound to a nitrocellulose surface. Here we report that actin filaments can move in opposite directions on tracks of myosin heads formed when actin filaments decorated with HMM are placed on a nitrocellulose surface. The actin filaments always move forward, frequently changing the direction of the movement, but never move backward reversing the polarity of the movement. The direction of movement is therefore determined by the polarity of the actin filament. These results indicate that myosin heads have considerable flexibility.

Actins↗

Myosin heavy chain kinase from developed Dictyostelium cells. Purification and characterization.

We purified to homogeneity the Dictyostelium discoideum myosin heavy chain kinase that is implicated in the heavy chain phosphorylation increases that occur during chemotaxis. The kinase is initially found in the insoluble fraction of developed cells. The major purification step was achieved by affinity chromatography using a tail fragment of Dictyostelium myosin (LMM58) expressed in Escherichia coli (De Lozanne, A., Berlot, C. H., Leinwand, L. A., and Spudich, J. A. (1988) J. Cell Biol. 105, 2990-3005). The kinase has an apparent molecular weight of 84,000 as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The apparent native molecular weight by gel filtration is 240,000. The kinase catalyzes phosphorylation of myosin heavy chain or LMM58 with similar kinetics, and the extent of phosphorylation for both is 4 mol of phosphate/mol. With both substrates the Vmax is about 18 mumol/min/mg and the Km is 15 microM. The myosin heavy chain kinase is specific to Dictyostelium myosin heavy chain, and the phosphorylated amino acid is threonine. The kinase undergoes autophosphorylation. Each mole of kinase subunit incorporates about 20 mol of phosphates. Phosphorylation of myosin by this kinase inhibits myosin thick filament formation, suggesting that the kinase plays a role in the regulation of myosin assembly.

Actin Cytoskeleton↗

Chemoattractant-elicited translocation of myosin in motile Dictyostelium.

The distribution of myosin was studied in amebae of the Ax-3 and NC-4 strains of Dictyostelium migrating at room temperature, using indirect immunofluorescence of aggregation-competent amebae and the agar-overlay technique. Amebae were fixed in methanol-formaldehyde or absolute acetone at -15 degrees C before or after stimulation with micromolar cyclic AMP at room temperature (20-25 degrees C). Myosin was detected by monoclonal antibodies to Dictyostelium myosin heavy chain followed by a fluorescent secondary antibody that had been preabsorbed to remove nonspecific staining. In both strains there was a striking increase in intensity of anti-myosin immunofluorescence in the cortex where it appeared as a continuous ring 30 seconds after addition of cyclic AMP. This correlated with a rounding up of the cell body. Sixty seconds after stimulation there was a clear reduction of cytoplasmic myosin rods in conjunction with the increased cortical localization. At this time extensions of largely hyaline cytoplasm were observed that extended beyond the cortical shell of myosin. Two minutes after the stimulus the immunofluorescence remained as a distinct line at the cortex, but the cells began to resume in elongated shape. By 3 minutes (NC-4 strain) or 5 minutes (Ax-3 strain) the amebae had largely returned to the control shape, and myosin had returned to its control distribution. Counts of the treated cells at different time points substantiated the observations of individual cells. The time course of translocation of myosin in the Ax-3 strain parallels the time course of myosin phosphorylation reported in previous studies. The results are interpreted in terms of a working hypothesis for the mechanism of translocation.

Antibodies, Monoclonal↗

Gene replacement in Dictyostelium: generation of myosin null mutants.

The eukaryotic slime mold Dictyostelium discoideum has a single conventional myosin heavy chain gene (mhcA). The elimination of the mhcA gene was achieved by homologous recombination. Two gene replacement plasmids were constructed, each carrying the G418 resistance gene as a selective marker and flanked by either 0.7 kb of 5' coding sequence and 0.9 kb of 3' coding sequence or 1.5 kb of 5' flanking sequence and 1.1 kb of 3' flanking sequence. Myosin null mutants (mhcA- cells) were obtained after transformation with either of these plasmids. The mhcA- cells are genetically stable and are capable of a variety of motile processes. Our results provide genetic proof that in Dictyostelium the conventional myosin gene is required for growth in suspension, normal cell division and sporogenesis, and illustrate how gene targeting can be used as a tool in Dictyostelium.

Dictyostelium↗

Linkage analysis of the myosin heavy chain gene in Dictyostelium discoideum using a mutation generated by homologous recombination.

A mutation (mhcA1 in strain HMM) created by insertional gene inactivation was used to map the Dictyostelium discoideum myosin heavy chain gene (mhcA) to linkage group IV. Three phenotypic traits associated with this mutation (slow colony growth, inability of the mutant to develop past aggregation, and the presence of five to ten integrated vector copies) cosegregated as expected for the consequences of a single insertional event. This linkage was confirmed using a restriction fragment length polymorphism. The mhcA1 mutation was recessive to wild type and was nonallelic with mutations at the following loci on linkage group IV: aggJ, aggL. couH, minA, phgB and tsgB. This work demonstrates the ability to apply standard techniques developed for D. discoideum parasexual genetic analyses to mutants generated by transformation, which is of particular relevance to analysis of genes for which no classical mutations or restriction fragment length polymorphisms are available.

Dictyostelium↗

Intermolecular versus intramolecular interactions of Dictyostelium myosin: possible regulation by heavy chain phosphorylation.

Dictyostelium myosin has been examined under conditions that reveal intramolecular and intermolecular interactions that may be important in the process of assembly and its regulation. Rotary shadowed myosin molecules exhibit primarily two configurations under these conditions: straight parallel dimers and folded monomers. All of the monomers bend in a specific region of the 1860-A-long tail that is 1200 A from the head-tail junction. Molecules in parallel dimers are staggered by 140 A, which is a periodicity in the packing of myosin molecules originally observed in native thick filaments of muscle. The most common region for interaction in the dimers is a segment of the tail about 200-A-long, extending from 900 to 1100 A from the head-tail junction. Parallel dimers form tetramers by way of antiparallel interactions in their tail regions with overlaps in multiples of 140 A. The folded configuration of the myosin molecules is promoted by phosphorylation of the heavy chain by Dictyostelium myosin heavy chain kinase. It appears that the bent monomers are excluded from filaments formed upon addition of salt while the dimeric molecules assemble. These results may provide the structural basis for primary steps in myosin filament assembly and its regulation by heavy chain phosphorylation.

Dictyostelium↗

Multiple actin-based motor genes in Dictyostelium.

Dictyostelium cells, devoid of conventional myosin, display a variety of motile activities, consistent with the presence of other molecular motors. The Dictyostelium genome was probed at low stringency with a gene fragment containing the conserved conventional myosin head domain sequences to identify other actin-based motors that may play a role in the observed motility of these mutant cells. One gene (abmA) has been characterized and encodes a polypeptide of approximately 135 kDa with a head region homologous to other myosin head sequences and a tail region that is not predicted to form either an alpha-helical structure of coiled-coil interactions. Comparisons of the amino acid sequences of the tail regions of abmA, Dictyostelium myosin I, and Acanthamoeba myosins IB and IL reveal an area of sequence similarity in the amino terminal half of the tail that may be a membrane-binding domain. The abmA gene, however, does not contain an unusual Gly, Pro, Ala stretch typical of many of the previously described myosin Is. Two additional genes (abmB and abmC) were identified using this approach and also found to contain sequences that encode proteins with typical conserved myosin head sequences. The abm genes may be part of a large family of actin-based motors that play various roles in diverse aspects of cellular motility.

Actins↗

Hygromycin resistance as a selectable marker in Dictyostelium discoideum.

We have constructed an expression cartridge which has the bacterial hygromycin resistance gene (hph) fused to the Dictyostelium discoideum actin 15 promoter, with a segment of 3'-flanking DNA from the actin 15 locus placed downstream of the hph gene to serve as a transcription terminator. The plasmid pDE109, which contained this cartridge and a Dictyostelium origin of replication, transformed D. discoideum with high efficiency under hygromycin selection. The availability of this selectable marker circumvents the previous limitation of having G418 resistance as the only selectable marker for this organism; secondary transformation can now be used to introduce DNA into previously transformed cell lines.

Anti-Bacterial Agents↗

Comparison of the structure of myosin subfragment 1 bound to actin and free in solution. A neutron scattering study using actin made "invisible" by deuteration.

The structure of subfragment 1 (S1) bound to F-actin has been compared to the structure of free S1 using neutron scattering. The F-actin was rendered "invisible" to neutrons by selective deuteration and solvent contrast matching. Highly deuterated actin was purified from the slime mold Dictyostelium discoideum, which was fed deuterated Escherichia coli. The properties of this actin were found to be similar to those of protonated actin. The neutron-scattering pattern of S1 bound to this "invisible" actin was compared to that of free S1. At near-physiological ionic strength, a strong interference effect was observed, which arose from pairs of S1 molecules cross-linking actin filaments. However, at low ionic strength the only differences that could be observed were attributed to interference effects between neutrons scattered from S1s bound randomly to equivalent sites on an actin filament. These effects became negligible as the fraction of actin sites occupied by S1 approached zero. Thus, we conclude that the scattering by S1 attached to F-actin is identical with that of free S1, to a resolution of about 2.5 nm. The difference in apparent radii of gyration is less than 0.05 nm. Modeling calculations have been carried out to determine the sensitivity of neutron scattering to possible S1 deformations. The calculations showed that deformations of the structure of S1 that are large enough ultimately to produce a powerstroke of 5 nm or greater are only consistent with the data if they involve at most about 20% of the S1 mass. These results restrict the class of plausible models describing force generation in muscle contraction.

Actins↗

Codon preference in Dictyostelium discoideum.

Dictyostelium discoideum is of increasing interest as a model eukaryotic cell because its many attributes have recently been expanded to include improved genetic and biochemical manipulability. The ability to transform Dictyostelium using drug resistance as a selectable marker (1) and to gene target by high frequency homologous integration (2) makes this organism particularly useful for molecular genetic approaches to cell structure and function. Given this background, it becomes important to analyze the codon preference used in this organism. Dictyostelium displays a strong and unique overall codon preference. This preference varies between different coding regions and even varies between coding regions from the same gene family. The degree of codon preference may be correlated with expression levels but not with the developmental time of expression of the gene product. The strong codon preference can be applied to identify coding regions in Dictyostelium DNA and aid in the design of oligonucleotide probes for cloning Dictyostelium genes.

Codon↗

Coexpression and assembly of myosin heavy chain and myosin light chain in Escherichia coli.

A fragment of the Dictyostelium discoideum myosin heavy chain gene representing heavy meromyosin was coexpressed in Escherichia coli with the entire essential myosin light chain from the scallop. The expressed myosin heavy chain and essential myosin light chain copurify through ammonium sulfate fractionation, anion exchange, and gel filtration chromatography. The purified complex consists of about 1 mol of light chain per mol of heavy chain. This stoichiometry, which is that of native myosin, suggests that no special eukaryotic machinery is required for coassembly of these two proteins. By coexpressing different myosin heavy chain and myosin light chain combinations, it should be possible to study various isoforms of these two proteins, which are both products of multigene families in mammals. E. coli is thus an ideal system in which to study expression and multimeric assembly of individual components of the eukaryotic contractile apparatus.

Amino Acid Sequence↗

Disruption of the Dictyostelium myosin heavy chain gene by homologous recombination.

The phenomenon of homologous recombination, which allows specific gene conversion and gene insertion, can be a powerful system for the study of eukaryotic cell biology. Data are presented demonstrating that integration of a transfected plasmid by homologous recombination occurs in the motile eukaryotic cell Dictyostelium discoideum. A plasmid carrying a G418 resistance gene and the amino terminal half of the myosin heavy chain gene was used to transfect Dictyostelium. A large fraction of the resultant G418-resistant cells had the plasmid integrated into the single genomic copy of the heavy chain gene. These cells, which fail to express the native myosin but express the myosin fragment, are defective in cytokinesis and become large and multinucleate. In spite of the absence of native myosin, these cells, termed hmm cells, exhibit many forms of cell movement, including membrane ruffling, phagocytosis, and chemotaxis. The hmm cells can aggregate but are blocked at a later stage in the Dictyostelium developmental cycle. The hmm cells revert to the wild-type phenotype. Reversion of the hmm phenotype is due to excision and loss of the transforming plasmid. The revertant cells express native myosin, are G418 sensitive, and have a normal developmental cycle. These results constitute genetic proof that the intact myosin molecule is required for cytokinesis and not for karyokinesis.

Cell Division↗

Movement of myosin fragments in vitro: domains involved in force production.

We have used the Nitella-based movement assay to localize the site of force production in myosin. Methods were developed to use nonfilamentous myosin or proteolytic fragments of myosin in place of the thick filaments used in the original assay. In the experiments described here, the tail of myosin or its subfragments is anchored via antibodies to the surface of small particles. Nonfilamentous myosin or its subfragments move along Nitella actin cables at speeds similar to those obtained with filamentous myosin. We generated short HMM, a myosin fragment containing the heads and only 400 A of the tail. Although short HMM lacks the "hinge" region proposed by Harrington to be the site of force generation, and is incapable of forming thick filaments, it moves along actin at speeds above 1 micron/sec. Therefore, neither a thick filament nor the carboxy-terminal 1100 A of the tail is required for movement along actin. The results indicate that force production occurs in or near the myosin heads.

Actins↗

Chemoattractant-elicited increases in Dictyostelium myosin phosphorylation are due to changes in myosin localization and increases in kinase activity.

We previously reported (Berlot, C. H., Spudich, J. A., and Devreotes, P. N. (1985) Cell 43, 307-314) that cAMP stimulation of chemotactically competent Dictyostelium amoebae causes transient increases in phosphorylation of the myosin heavy chain and 18,000-dalton light chain in vivo and in vitro. In this report we investigate the mechanisms involved in these changes in phosphorylation. In the case of heavy chain phosphorylation, the amount of substrate available for phosphorylation appears to be the major factor regulating the in vitro phosphorylation rate. Almost all heavy chain kinase activity is insoluble in Triton X-100, and the increase in the heavy chain phosphorylation rate in vitro parallels an increase in Triton insolubility of myosin. Changes in heavy chain phosphatase activity are not involved in the changes in the in vitro phosphorylation rate. In the case of light chain phosphorylation, increases in the vitro phosphorylation rate occur under conditions where the amount of substrate available for phosphorylation is constant and phosphatase activity is undetectable, implicating light chain kinase activation as the means of regulation. The specificity of the myosin kinases operating in vivo and in vitro was explored using phosphoamino acid and chymotryptic phosphopeptide analysis. The light chain is phosphorylated on serine both in vivo and in vitro, and phosphopeptide maps of the light chain phosphorylated in vivo and in vitro are indistinguishable. In the case of the heavy chain, both serine and threonine are phosphorylated in vivo and in vitro, although the cAMP-stimulated increases in phosphorylation occur primarily on threonine. Phosphopeptide maps of the heavy chain show that the peptides phosphorylated in vitro represent a major subset of those phosphorylated in vivo. The kinetics of the transient increases in myosin phosphorylation rates observed in vitro can be predicted quantitatively from the in vivo myosin phosphorylation data assuming that there is a constant phosphatase activity.

Amino Acids↗