Search PubMed⌕ Search

Biomedical subjects

Ilya Zharov

Publications and source records attributed to Ilya Zharov.

13 recordsLinked to original sources

Tricarboranyl pentaerythritol-based building block.

A new tricarborane building block based on pentaerythritol was prepared for applications in boron neutron capture therapy (BNCT). Its X-ray single-crystal structure revealed a high degree of steric congestion. To enable the attachment of the building block to other moieties, a succinimidyl linker has been introduced at the focal point, and a generation-2 hexacarborane-containing dendron carrying 60 boron atoms has been prepared using a 2,2-bis(hydroxymethyl)propionic acid core.

Boron Compounds↗

Polymer-modified opal nanopores.

The surface of nanopores in opal films, assembled from 205 nm silica spheres, was modified with poly(acrylamide) brushes using surface-initiated atom transfer radical polymerization. The colloidal crystal lattice remained unperturbed by the polymerization. The polymer brush thickness was controlled by polymerization time and was monitored by measuring the flux of redox species across the opal film using cyclic voltammetry. The nanopore size and polymer brush thickness were calculated on the basis of the limiting current change. Polymer brush thickness increased over the course of 26 h of polymerization in a logarithmic manner from 1.3 to 8.5 nm, leading to nanopores as small as 7.5 nm.

Acrylic Resins↗

Photon gated transport at the glass nanopore electrode.

The interior surface of the glass nanopore electrode was modified with spiropyran moieties to impart photochemical control of molecular transport through the pore orifice (15-90 nm radius). In low ionic strength acetonitrile solutions, diffusion of a positively charged species (Fe(bpy)(3)(2+)) is electrostatically blocked with approximately 100% efficiency by UV light-induced conversion of the neutral surface-bound spiropyran to its protonated merocyanine form (MEH+). Transport through the pore orifice is restored by either irradiation of the electrode with visible light to convert MEH+ back to spiropyran or addition of a sufficient quantity of supporting electrolyte to screen the electrostatic field associated with MEH+. The transport of neutral redox species through spiropyran-modified glass nanopores is not affected by light, allowing photoselective transport of redox molecules to the electrode surface based on charge discrimination. The glass nanopore electrode can also be employed as a photochemical trap, by UV light conversion of surface-bound spiropyran to MEH+, preventing Fe(bpy)(3)(2+) initially in the pore from diffusing through the orifice.

2,2'-Dipyridyl↗

Polyester-based carborane-containing dendrons.

New carborane-containing dendrons based on a 2,2-bis(hydroxymethyl)propanoic acid scaffold have been prepared for applications in boron neutron capture therapy. A generation-2 carborane-containing dendron carrying 40 boron atoms was the highest generation synthetically available due to the steric crowding. The structure of this dendron has been simulated by molecular dynamics. A 10-carbon linker carrying a carboxylic group has been installed at the focal point of the dendron to distance the attachment point from the sterically hindered core.

Boron Compounds↗

Chiral permselectivity in surface-modified nanoporous opal films.

Nanoporous 7 mum thin opal films comprising 35 layers of 200 nm diameter SiO2 spheres were assembled on Pt electrodes and modified with chiral selector moieties on the silica surface. Diffusion of chiral redox species through the opals was studied by cyclic voltammetry. The chiral opal films demonstrate high selectivity for transport of one enantiomer over the other. This chiral permselectivity is attributed to the surface-facilitated transport utilizing noncovalent interactions between the chiral permeant molecules and surface-bound chiral selectors.

Chemistry, Pharmaceutical↗

Suspended self-assembled opal membranes.

Suspended self-assembled opal membranes have been prepared from 440- or 170-nm-diameter silica spheres by evaporation of their colloidal solutions over vertically oriented 0.3-mm-thick silicon wafers containing frustum-shaped openings. Robust 0.5 x 0.5 mm(2) membranes with a thickness of ca. 300 mum have been reproducibly prepared using 170 nm silica spheres. The membranes show regular fcc packing with an exposed (111) orientation and are formed in a process that involves drawing silica spheres into the opening with the solvent meniscus.

Journal Article↗

CB11Me11 boronium ylides: carba-closo-dodecaboranes with a naked boron vertex.

In pentane solution, 2 equiv of the icosahedral CB(11)Me(12)(*) radical cleaves the Si-Si bond of hexaalkyldisilanes by boron to silicon methyl transfer with formation of 2 equiv of methyltrialkylsilanes. The loss of a methyl radical converts the CB(11)Me(12)(*) radical into an internally charge-compensated "boronium ylide" CB(11)Me(11) with a naked vertex, which can be formally viewed as a deprotonated hypercloso carborane. It has been isolated as an air-sensitive solid, stable only below approximately -60 degrees C. The naked vertex appears to be in position 12 since the material reacts instantaneously with alcohols and ethers to form the 12-alkoxy anions 12-CB(11)Me(11)OR. It reacts with many other nucleophiles to yield more complex mixtures containing similar products. DFT calculations for the four CB(11)Me(11) isomers give closed-shell ground-state electronic structures. For the isomer with naked vertex 12, a DFT computational search failed to reveal any skeletal dimers, apparently due to excessive methyl-methyl repulsions, and only a cyclic dimer bound through weak interactions of one of the 7-methyl hydrogen atoms on each cage with the empty exocyclic orbitals on B12 of the other cage was found. Natural hybrid orbital populations suggest that the three possible isomers of monomeric boronium ylides are close to true singlet ylides, with triplet states approximately 50 kcal/mol higher. The calculated electronic structure of the carbonium ylide is close to a singlet carbene, with a triplet state approximately 16 kcal/mol higher. An attempted preparation of Me(3)C(+)CB(11)Me(12)(-) yielded neopentane and products consistent with a sequential loss of methyl groups from the carborane cage with a transient formation of similar boronium ylides. Probable mechanisms of these methyl transfer reactions are considered, and the possibly quite general role of "ylide" structures in Lewis acid induced substitution reactions on the boron vertices of carboranes and boranes is noted.

Journal Article↗

pH- and ionic strength-controlled cation permselectivity in amine-modified nanoporous opal films.

The influence of pH and ionic strength on permselective transport in nanoporous opal films prepared from 440 nm silica spheres was investigated by cyclic voltammetry in aqueous and acetonitrile solutions. Three-layer opal films were deposited from a 1.5 wt % colloidal solution of silica spheres onto 25-microm-diameter Pt microdisk electrodes shrouded in glass. The films were chemically modified by immersing them in a dry acetonitrile solution of 3-aminopropyl triethoxysilane. When the surface amino groups of the modified opal films are protonated and there is little or no supporting electrolyte present in solution, the flux of cationic redox species through the opal membrane is blocked because of electrostatic repulsion. The permselectivity is pH-dependent and can be modulated by adjusting the Debye screening length within the nanopores of the opal by changing the ionic strength of the contacting solution.

Journal Article↗

Chemically modified opals as thin permselective nanoporous membranes.

Thin-film opals comprising three layers of 440 nm diameter SiO2 spheres were assembled on Pt electrodes and modified with amino groups on the silica surface. Diffusion of anionic, cationic, and neutral redox species through the opals was studied by cyclic voltammetry. The chemically modified opal membranes demonstrate high molecular throughput and, at low pH, selectively block transport of a cationic redox species relative to that of anionic and neutral redox species. This permselective behavior is attributed to the electrostatic interactions that are enhanced by the tortuous pathway within the opal and by the high surface area of the chemically modified spheres.

Journal Article↗

Metal cation-methyl interactions in CB11Me12(-) salts of Me3Ge+, Me3Sn+, and Me3Pb+.

Oxidation of Me(6)M(2) (M = Ge, Sn) and Me(4)Pb with the CB(11)Me(12)(*) radical in alkane solvents produced the insoluble salts Me(3)M(+)CB(11)Me(12)(-), characterized by CP-MAS NMR and EXAFS. The cations interact with methyl groups of CB(11)Me(12)(-) with coordination strength increasing from Pb to Ge. Density functional theory (DFT) calculations for the isolated ion pairs, Me(3)M(+)CB(11)Me(12)(-) (M = Ge, Sn), revealed three isomers with the cation above methyl 2, 7, or 12, and not above a BB edge or a BBB triangle. The interaction has a considerable covalent component, with the cation attempting to perform a backside S(E)2 substitution on the methyl carbon. In a fourth less favorable isomer the cation is near methyl 1, inclined toward methyl 2, and interacts with hydrogens. DFT atomic charge distributions and plots of the electrostatic potential on the surface of spheres centered at the CB(11)H(12)(-) and CB(11)Me(12)(-) icosahedra display the effects of uneven charge distribution within the anion and contradict the common belief that the negative charge of the cage anion is concentrated primarily on the cage boron atoms 7-12; in CB(11)Me(12)(-), roughly half is on the cage carbon and the rest on methyls 7-12.

Boron Compounds↗

Molecular imprinting inside dendrimers.

Synthetic hosts capable of binding porphyrins have been produced by a mixed-covalent-noncovalent imprinting process wherein a single binding site is created within cross-linked dendrimers. Two synthetic hosts were prepared, using as templates 5,10,15,20-tetrakis(4-hydroxyphenyl)porphyrin and 5,10,15,20-tetrakis(3,5-dihydroxyphenyl)porphyrin. These two templates were esterified with, respectively, fourth- and third-generation Fréchet-type dendrons containing homoallyl end-groups. The resulting tetra- and octadendron macromolecules underwent the ring-closing metathesis reaction using Grubbs' Type I catalyst, RuCl(2)(P(C(6)H(5))(3))(2)(CHCH(2)C(6)H(5)), to give extensive interdendron cross-linking. Hydrolytic removal of the porphyrin cores afforded imprinted hosts whose ability to bind porphyrins with various peripheral substituents was investigated by UV-visible spectrophotometric titrations and size exclusion chromatography. The results indicate a high yield of imprinted sites that show high selectivity for binding of porphyrins capable of making at least four hydrogen bonds, but only a moderate degree of shape selectivity.

Binding Sites↗

Synthetic hosts by monomolecular imprinting inside dendrimers.

Synthetic host systems capable of selectively binding guest molecules are of interest for applications ranging from separations and chemical or biological sensing to the development of biomedical materials. Such host systems can be efficiently prepared by 'imprinting' polymers or inorganic materials with template molecules, which, upon removal, leave behind spatially arranged functional groups that act as recognition sites. However, molecularly imprinted polymers have limitations, including incomplete template removal, broad guest affinities and selectivities, and slow mass transfer. An alternative strategy for moulding desired recognition sites uses combinatorial libraries of assemblies that are made of a relatively small number of molecules, interconverting in dynamic equilibrium; upon addition of a target molecule, the library equilibrium shifts towards the best hosts. Here we describe the dynamic imprinting of dendritic macromolecules with porphyrin templates to yield synthetic host molecules containing one binding site each. The process is based on our general strategy to prepare cored dendrimers, and involves covalent attachment of dendrons to a porphyrin core, cross-linking of the end-groups of the dendrons, and removal of the porphyrin template by hydrolysis. In contrast to more traditional polymer imprinting, our approach ensures nearly homogeneous binding sites and quantitative template removal. Moreover, the hosts are soluble in common organic solvents and amenable to the incorporation of other functional groups, which should facilitate further development of this system for novel applications.

Benzene↗

C-Hydroxydicarba-closo-dodecaboranes.

An improved synthesis and a full characterization of all three 12-vertex C-hydroxydicarba-closo-dodecaboranes 1-3 are reported. These inorganic analogues of phenols are highly acidic, but unlike phenols, they are transparent in the near-UV region and are stable to oxidation. The structure of their oxyanions 1a-3a poses an interesting issue of a closo versus a bridged nido form. Also described is an introduction of a functionalized spacer in position 2 of 1 designed to permit incorporation into more complex organic structures.

Journal Article↗