Search PubMed⌕ Search

Biomedical subjects

Hermann J Gruber

Publications and source records attributed to Hermann J Gruber.

9 recordsLinked to original sources
PubMed2005

Membrane binding of beta2-glycoprotein I can be described by a two-state reaction model: an atomic force microscopy and surface plasmon resonance study.

Complexes formed between beta2GPI (beta2-glycoprotein I), a human plasma protein, and biological membranes are considered to be targets of macrophages and antiphospholipid autoantibodies involved in autoimmune diseases, such as antiphospholipid syndrome or systemic lupus erythematosus. The positively charged lysine-rich fifth domain of beta2GPI facilitates its interaction with phospholipid membranes containing acidic phospholipids, which normally become exposed by apoptotic processes. In the present study, atomic force microscopy was applied to visualize the binding of beta2GPI to a mixed phospholipid model membrane at physiological ionic strength. On supported lipid bilayers the formation of supramolecular assemblies of the protein with a height of approx. 3.3 nm was observed, suggesting a lateral agglomeration of beta2GPI. Detailed analysis of kinetic constants using surface plasmon resonance revealed that the binding can be described by a two-state reaction model, i.e. a very fast interaction step, depending on the content of acidic phospholipids in the bilayer, and a second step with significantly lower k(on) and k(off) values. Taken together, our results suggest a biphasic interaction mechanism: a fast step of beta2GPI binding to negatively charged lipids, mainly based on electrostatic interactions, and a slower phase of agglomeration of the protein on the bilayer surface accompanied by a protein-induced rigidification of the membrane, as revealed by electron paramagnetic resonance.

Cell Membrane↗
PubMed2004

Monitoring of glass derivatization with pulsed force mode atomic force microscopy.

Non-specific adsorption of proteins at solid/liquid interfaces is a major problem in the use of synthetic biomaterials and in ultrasensitive detection methods. Grafting surfaces with a dense layer of poly(ethylene glycol) (PEG) or other polymers is a most widely used strategy to solve this task. While such modified surfaces have been characterized by their ability to resist protein adsorption, the polymer layers themselves have rarely been studied in fine detail. Atomic force microscopy (AFM) using the pulsed force mode (PFM), is an ideal technique to investigate structural features and physiochemical properties of surfaces because topology and adhesion are simultaneously detected with high lateral resolution. In the present study, PFM-AFM was applied to thoroughly characterize different stages of glass derivatization, up to the formation of a dense PEG layer. Lateral inhomogeneities in topology and/or adhesion were observed at all stages before PEG attachment. The covalently bound PEG, however, was seen to form a densely packed monolayer with maximal thickness, smooth surface, and weak adhesion. Thus, PFM-AFM appears to be a valuable tool for the characterization of protein-repelling surfaces in solution.

Adhesiveness↗
PubMed2004

Imaging morphological details and pathological differences of red blood cells using tapping-mode AFM.

The surface topography of red blood cells (RBCs) was investigated under near-physiological conditions using atomic force microscopy (AFM). An immobilization protocol was established where RBCs are coupled via molecular bonds of the membrane glycoproteins to wheat germ agglutinin (WGA), which is covalently and flexibly tethered to the support. This results in a tight but non-invasive attachment of the cells. Using tapping-mode AFM, which is known as gentle imaging mode and therefore most appropriate for soft biological samples like erythrocytes, it was possible to resolve membrane skeleton structures without major distortions or deformations of the cell surface. Significant differences in the morphology of RBCs from healthy humans and patients with systemic lupus erythematosus (SLE) were observed on topographical images. The surface of RBCs from SLE patients showed characteristic circular-shaped holes with approx. 200 nm in diameter under physiological conditions, a possible morphological correlate to previously published changes in the SLE erythrocyte membrane.

Erythrocyte Membrane↗
PubMed2004

Simultaneous topography and recognition imaging using force microscopy.

We present a method for simultaneously recording topography images and localizing specific binding sites with nm positional accuracy by combining dynamic force microscopy with single molecule recognition force spectroscopy. For this we used lysozyme adsorbed to mica, the functionality of which was characterized by enzyme immunoassays. The topography and recognition images were acquired using tips that were magnetically oscillated during scanning and contained antibodies directed against lysozyme. For cantilevers with low Q-factor (approximately 1 in liquid) driven at frequencies below resonance, the surface contact only affected the downward deflections (minima) of the oscillations, whereas binding of the antibody on the tip to lysozyme on the surface only affected the upwards deflections (maxima) of the oscillations. The recognition signals were therefore well separated from the topographic signals, both in space (Delta z approximately 5 nm) and time (approximately 0.1 ms). Topography and recognition images were simultaneously recorded using a specially designed electronic circuit with which the maxima (U(up)) and the minima (U(down)) of each sinusoidal cantilever deflection period were depicted. U(down) was used for driving the feedback loop to record the height (topography) image, and U(up) provided the data for the recognition image.

Aluminum Silicates↗
PubMed2002

Quick measurement of protein sulfhydryls with Ellman's reagent and with 4,4'-dithiodipyridine.

Since its introduction in 1959, Ellman's reagent (5,5'-dithio-bis(2-nitrobenzoic acid)) has been the favorite reagent for spectrophotometric measurement of protein sulfhydryls. Meanwhile however, evidence has accumulated that many protein sulfhydryls give an incomplete reaction with Ellman's reagent, even during prolonged assay times. In the present study, the kinetic problem was solved by including cystamine as a "mediator" between the protein sulfhydryl and Ellman's reagent, as previously applied in an enzymatic thiol assay [9]. As an alternative, 4,4'-dithiodipyridine (DTDP) was used in place of Ellman's reagent. Due to its small size, amphiphilic nature, and lack of charge, DTDP quickly reacts with poorly accessible protein sulfhydryls, without any catalysis by cystamine. The DTDP method and the Ellman/cystamine method were both optimized for maximal sensitivity, minimal sample consumption (detection limit 0.2 nmol mL(-1), determination limit 0.6 nmol mL(-1)), and minimal assay time (5 min). In validation experiments, both methods gave identical results and the measured sulfhydryls/protein matched the expected values. Electronic supplementary material to this paper can be obtained by using the Springer Link server located at http://dx.doi.org/10.1007/s00216-002-1347-2.

Animals↗
PubMed2002

Single molecule recognition of protein binding epitopes in brush border membranes by force microscopy.

Sidedness and accessibility of protein epitopes in intact brush border membrane vesicles were analyzed by detecting single molecule interaction forces using molecular recognition force microscopy in aqueous physiological solutions. Frequent antibody-antigen recognition events were observed with a force microscopy tip carrying an antibody directed against the periplasmically located gamma-glutamyltrans- peptidase, suggesting a right side out orientation of the vesicles. Phlorizin attached to the tips bound to NA+/D-glucose cotransporter molecules present in the vesicles. The recognition was sodium dependent and inhibited by free phlorizin and D-glucose, and revealed an apparent K(D) of 0.2 microM. Binding events were also observed with an antibody directed against the epitope aa603-aa630 close to the C terminus of the transporter. In the presence of phlorizin the probability of antibody binding was reduced but the most probable unbinding force f(u) = 100 pN remained unchanged. In the presence of D-glucose and sodium, however, both the binding probability and the most probable binding force (f(u) = 50 pN) were lower than in its absence. These studies demonstrate that molecular recognition force microscopy is a versatile tool to probe orientation and conformational changes of epitopes of membrane components during binding and trans-membrane transport.

Animals↗
PubMedDate not supplied

Synthesis, characterization, and application of cy-dye- and alexa-dye-labeled hongotoxin(1) analogues. The first high affinity fluorescence probes for voltage-gated K+ channels.

Hongotoxin(1) (HgTX(1)), a 39-residue peptide recently isolated from the venom of Centruroides limbatus, blocks the voltage-gated K+ channels K(v)1.1, K(v)1.2, and K(v)1.3 at picomolar toxin concentrations (Koschak, A., Bugianesi, R. M., Mitterdorfer, J., Kaczorowski, G. J., Garcia, M. L., and Knaus, H. G. (1998) J. Biol. Chem. 273, 2639-2644). In this report, we determine the three-dimensional structure of HgTX(1) using NMR spectroscopy (PDB-code: 1HLY). HgTX(1) was found to possess a structure similar to previously characterized K+ channel toxins (e.g. margatoxin) consisting of a three-stranded antiparallel beta-sheet (residues 2-4, 26-30, and 33-37) and a helical conformation (part 3(10) helix and part alpha helix; residues 10-20). Due to the importance of residue Lys-28 for high-affinity interaction with the respective channels, lysine-reactive fluorescence dyes cannot be used to label wild-type HgTX(1). On the basis of previous studies (see above) and our NMR data, a HgTX(1) mutant (HgTX(1)-A19C) was engineered, expressed, and purified. HgTX(1)-A19C-SH was labeled using sulfhydryl-reactive Cy3-, Cy5-, and Alexa-dyes. Pharmacological characterization of fluorescently labeled HgTX(1)-A19C in radioligand binding studies indicated that these hongotoxin(1) analogues retain high-affinity for voltage-gated K+ channels and a respective pharmacological profile. Cy3- and Alexa-dye-labeled hongotoxin(1) analogues were used to investigate the localization of K+ channels in brain sections. The distribution of toxin binding closely follows the distribution of K(v)1.2 immunoreactivity with the highest expression levels in the cerebellar Purkinje cell layer. Taken together, these results demonstrate that fluorescently labeled HgTX(1) analogues comprise novel probes to characterize a subset of voltage-gated K+ channels.

Animals↗