Biomedical subjects

Haijun Jiao

Publications and source records attributed to Haijun Jiao.

At least 37 records · Page 2Linked to original sources

PubMed2005

Theoretical ONIOM2 study on pyridine adsorption in the channels and intersection of ZSM-5.

The structures of the acid sites in the channels and intersections of H-, Li-, and Na-ZSM-5 (ZSM = zeolite socony mobil) and their interactions with pyridine molecule have been computed by using three corresponding models containing 22 tetrahedral sites. The calculated adsorption energies of pyridine in the intersection regions of H-, Li-, and Na-ZSM-5 are 197.0, 172.5, and 122.3 kJ/mol, respectively, in good agreement with the respective experimental values of 200 +/- 5, 155-195, and 120 kJ/mol, while those in the straight and sinusoidal channels are much smaller (157.9 and 127.6, 152.2 and 149.4, and 150.4 and 109.9 kJ/mol, respectively). These indicate that the most probable adsorption site for pyridine in ZSM-5 is the acidic site located in the intersection region. The structural parameters of the adsorption complexes show that the acidic proton in the three models of H-ZSM-5 has been transferred to the nitrogen of pyridine, while in alkali cation-exchanged ZSM-5, the coordination of the alkali cation to the nitrogen atom of pyridine dominates the overall interaction. In addition, the adsorption complexes were further stabilized by the long-range electrostatic interaction between the positively charged pyridine hydrogen atoms and the negatively charged lattice oxygen atoms of the zeolite framework. In the intersection regions of H-, Li-, and Na-ZSM-5, the coordination energy of the charge-compensating cation to the pyridine nitrogen amounts to 58, 60, and 68% of the total adsorption energy, respectively, while another 42, 40, and 32%, respectively, is due to long-range electrostatic interactions. This indicates that the zeolite lattice framework surrounding the adsorption site has important contributions to the adsorption energy of the pyridine molecule.

Journal Article↗

PubMed2005

Investigation of a putative mobius aromatic hydrocarbon. The effect of benzannelation on mobius [4n]annulene aromaticity.

The first experimental example of a [4n]annulene derivative with one Mobius twist, 1, was synthesized recently [Ajami, D.; Oeckler, O.; Simon, A.; Herges, R. Nature 2003, 426, 819] and was purported to possess aromatic character. However, critical analysis of the published crystallographic data indicates that the Mobius [16]annulene core of 1 shows large bond alternation (Deltar up to 0.157 A). Delocalization in this core is inhibited by large dihedral angles, which hinders effective pi overlap. This conclusion is supported by computational results (B3LYP/6-311+G) on 1 and several less benzannelated derivatives, based on geometric (Deltar, Deltar(m), Julg A, HOMA) and magnetic (NICS, magnetic susceptibility exaltation) criteria of aromaticity. That benzannelation results in bond localization in the [16]annulene core is shown by additional computations on benzannelated derivatives of other Mobius aromatic species. Additionally, the aromatic stabilization energy (ASE) of 1 has been reinvestigated using two different procedures. Evaluation of uncorrected ISE(II) values of just the polyene bridge portion of 1 and its Huckel counterpart suggests that stabilization of 1 relative to its Huckel isomer is confined to the polyene bridge and is not due to a delocalized pi circuit. Furthermore, application of s-cis/s-trans corrections lowers the ISE(II) value of 1 from 4.0 kcal/mol to 0.6 kcal/mol, suggesting that 1 is nonaromatic.

Journal Article↗

PubMed2005

Density functional theory study of CO adsorption on molybdenum sulfide.

CO adsorption on four MoSx (stoichiometric and nonstoichiometric) clusters has been investigated by using density functional method. It is found that CO prefers adsorption on the coordinatively unsaturated (1010) surface. The adsorption energy of high coverage shows the additivity as compared with that of one CO adsorption, and there is no significant repulsive interaction between the end-on adsorbed CO probes. The computed CO stretching frequencies (2000-2080 cm(-1)) agree perfectly with the experimental data (a broad band centered at 2070 cm(-1) with a tail extent to 2000 cm(-1)). No bridged CO adsorption is favored energetically under high CO concentration, and this might explain the catalytic ability of MoSx for C1 products instead of higher hydrocarbons and alcohols.

Journal Article↗

PubMed2005

Structures and energies of isolobal (BCO)n and (CH)n cages.

The structures and energies of isolobal (CH)n and (BCO)n polyhedral species, computed at the B3LYP density functional theory level, reveal contrasts in behavior. The strain energies of the (BCO)n cages are much smaller. Also unlike the (CH)n cages, the most stable (BCO)n polyhedra (n > or = 10) prefer structures with the largest number of three-membered rings. The planar (or nearly planar) faces of the cage systems were modeled by computations on planar, isoelectronic (CH2)n (Dnh) and (HBCO)n (Cnv) rings. While the strain energies of all the planar carbon rings, relative to the most stable D5h (CH2)5, were large, the strain energies of all the planar (HBCO)n (Cnv) rings were small. Remarkably, the three-membered (HBCO)3 (C3v) ring was the most stable. Finally, large (BCO)n systems prefer tubelike rather than cage structures.

Journal Article↗

PubMed2005

Hydroformylation and isomerization of allene and propyne: a density functional theory study.

The [HCo(CO)3]-catalyzed hydroformylation of allene and propyne has been investigated at the B3LYP level of density functional theory. It is found that hydroformylation of allene favors the linear anti-Markovnikov product in high regioselectivity both kinetically and thermodynamically. The origin of this regioselectivity comes from the enhanced stability of the eta3-allylic intermediate [(eta3-CH2CHCH2)Co(CO)3]. By contrast, propyne does not show any regioselectivity. The possible interconversion between allene and propyne mediated by [HCo(CO)3] has been explored.

Aldehydes↗

PubMed2005

Density functional theory study of hydrogen adsorption on Fe5C2(001), Fe5C2(110), and Fe5C2(100).

Density functional theory calculations have been carried out for hydrogen adsorption on the (001), (110), and (100) surfaces of Fe5C2. At 1/3 and 2/3 monolyer (ML) on (001), the most stable hydrocarbon species is CsH, while CsH and CsH3 can coexist at 1 ML. On (110), only dissociated hydrogen is found at 2/5 ML, while CsH is the most stable hydrogen carbon species at 4/5 ML, and CsH and CH3 coexist at 6/5 ML. On (001) and (110) surfaces, CsH2 is less stable and can dissociate into CsH or convert into CsH3, respectively. These results are in agreement with the experimental observations. On the metallic Fe5C2(100) surface which lacks surface carbon atoms on the surface monolayer, dissociated hydrogen is found at 1/2 ML, while both dissociated hydrogen and activated H2 are found at 1 ML.

Journal Article↗

PubMed2004

An industrially viable catalyst system for palladium-catalyzed telomerizations of 1,3-butadiene with alcohols.

The telomerization reaction of 1,3-butadiene with alcohols to give alkyl octadienyl ethers in the presence of palladium-carbene catalysts has been studied in detail. Unprecedented catalyst efficiency with turnover numbers (TON) up to 1,500,000 and turnover frequencies (TOF) up to 100,000 h(-1) have been obtained after optimization for the reaction of methanol in the presence of an excess of in situ generated carbene ligands. High yields (75-97 %) and catalyst productivities (TON 15,000-100,000) are observed for other aliphatic alcohols and phenols. For comparison five carbene-palladium(0) complexes have been synthesized and characterized by X-ray crystallography. Both electronic and steric effects on the stability and reactivity of the catalysts have been discussed on the basis of density functional theory calculations.

Alcohols↗

PubMed2004

Catalytic Markovnikov and anti-Markovnikov functionalization of alkenes and alkynes: recent developments and trends.

The regioselective functionalization of terminal alkenes and alkynes is of utmost importance for the synthesis of a wide variety of organic products. Based on the original observation by Vladimir Markovnikov-the pioneer of this field of research-in the 19th century, the possible regioisomeric products are classified as Markovnikov or anti-Markovnikov products. Contrary to traditional belief, it is nowadays possible to control the regiochemistry of various additions of nucleophiles to alkenes and alkynes by applying different transition-metal catalysts. Recent developments in this area of selective functionalization of alkenes and alkynes are reviewed.

Journal Article↗

PubMed2004

A general study of [(eta5-Cp')2Ti(eta2-Me3SiC2SiMe3)]-catalyzed hydroamination of terminal alkynes: regioselective formation of Markovnikov and anti-Markovnikov products and mechanistic explanation (Cp'=C5H5, C5H4Et, C5Me5).

A general study of the regioselective hydroamination of terminal alkynes in the presence of [(eta5-Cp)2Ti(eta2-Me3SiC2SiMe3)] (1), [(eta5-CpEt)2Ti(eta2-Me3SiC2SiMe3)] (CpEt=ethylcyclopentadienyl) (2), and [(eta5-Cp*)2Ti(eta2-Me3SiC2SiMe3)] (Cp*=pentamethylcyclopentadienyl) (3) is presented. While aliphatic amines give mainly the anti-Markovnikov products, anilines and aryl hydrazines yield the Markovnikov isomer as main products. Interestingly, using aliphatic amines such as n-butylamine and benzylamine the different catalysts lead to a significant change in the observed regioselectivity. Here, for the first time a highly selective switch from the Markovnikov to the anti-Markovnikov product is observed simply by changing the catalyst. Detailed theoretical calculations for the reaction of propyne with different substituted anilines and tert-butylamine in the presence of [(eta5-C5H5)Ti(=NR)(NHR)] (R=4-C6H4X; X=H, F, Cl, CH3, 2,6-dimethylphenyl) reveal that the experimentally observed regioselectivity is determined by the relative stability of the corresponding pi-complexes 10. While electrostatic stabilization favors the Markovnikov performance for aniline, the steric repulsive destabilization disfavors the Markovnikov performance for tert-butylamine.

Journal Article↗

PubMed2004

Hyperconjugation effect in substituted methyl boranes: an orbital deletion procedure analysis.

The hyperconjugation effect in the substituted methyl boranes, XCH(2)BH(2) (X = H, CH(3), NH(2), PH(2), OH, SH, F, Cl, Br), has been quantitatively evaluated by using the orbital deletion procedure (ODP), where the p(pi) orbital on boron is deactivated. Except for the case of X = NH(2), which forms a three-membered ring, the magnitude of the hyperconjugative stabilization in all other substituted methylborane ranges from 6.8 to 3.4 kcal/mol. Significant structural changes are observed, particularly the shortening of the central B-C bond distance and the reducing of the corresponding XCB and HCB bond angles. In general, the strength of the hyperconjugative interaction between the occupied sigma(C-X) bond and the vacant p(pi) orbital on boron is correlated to the electronegativity of X, and the competition between the donation ability of the sigma(C-X) and the sigma(C-H) bonds determines the preference of the staggered or eclipsed structure as the energy minimum state. When the donation abilities of the C-X and C-H bonds are comparable, other factors such as electron correlation and steric effect may play elaborate roles in the geometrical propensity of the most stable structures.

Journal Article↗

PubMed2004

Synthesis and characterization of hypoelectronic rhenaboranes. Analysis of the geometric and electronic structures of species following neither borane nor metal cluster electron-counting paradigms.

The reaction of (CpReH(2))(2)B(4)H(4) with monoborane leads to the sequential formation of (CpRe)(2)B(n)()H(n)() (n = 7-10, 1-4). These species adopt closed deltahedra with the same total connectivities as the closo-borane anions [B(n)()H(n)()](2)(-), n = 9-12, but with flattened geometries rather than spherical shapes. These rhenaborane clusters are characterized by high metal coordination numbers, Re-Re cross-cluster distances within the Re-Re single bond range, and formal cluster electron counts three skeletal electron pairs short of that required for a canonical closo-structure of the same nuclearity. An open cluster, (CpReH)(2)B(7)H(9) (5), is isolated that bears the same structural relationship to arachno-B(9)H(15) as 1-4 bear to the closo-borane anions. Chloroborane permits the isolation of (CpReH)(2)B(5)Cl(5) (6), an isoelectronic chloro-analogue of known open (CpWH(2))(2)B(5)H(5) and (CpRe)(2)B(6)H(4)Cl(2) (7), a triple-decker complex containing a planar, six-membered 1,2-B(6)H(4)Cl(2) ring. Both are putative five- and six-boron intermediates in the formation of 1. Electronic structure calculations (extended Hückel and density functional theory) yield geometries in agreement with the structure determinations, large HOMO-LUMO gaps in accord with the high stabilities, and (11)B chemical shifts accurately reflecting the observed shifts. Analyses of the bonding in 1-4 reveal that the CpRe.CpRe interaction generates fragment orbitals that are able to contribute the "missing" three skeletal electron pairs required for skeletal bonding. The necessity of a Re.Re interaction for strong cluster bonding requires a borane fragment shape change to accommodate it, thereby explaining the noncanonical geometries. Application of the debor principle of borane chemistry to the shapes of 1-4 readily rationalizes the observed geometries of 5 and 6. This evidence of the scope of transition metal fragment control of borane geometry suggests the existence of a large class of metallaboranes with structures not found in known borane or metal clusters.

Journal Article↗

PubMed2004

Theoretical studies on the smallest fullerene: from monomer to oligomers and solid States.

Hybrid B3LYP and density-functional-based tight-binding (DFTB) computations on the solid-state structures and electronic properties of the C(20) fullerene monomer and oligomers are reported. C(20) cages with C(2), C(2h), C(i), D(3d), and D(2h) symmetries have similar energies and geometries. Release of the very high C(20) strain is, in theory, responsible for the ready oligomerization and the formation of different solid phases. Open [2+2] bonding is preferred both in the oligomers and in the infinite one-dimensional solids; the latter may exhibit metallic character. Two types of three-dimensional solids, the open [2+2] simple cubic and the body-centered cubic (bcc) forms, are proposed. The energy of the latter is lower due to the better oligomer bonding. The open [2+2] simple cubic solid should be a conductor, whereas the bcc solids are insulators. The most stable three-dimensional solid-state structure, an anisotropically compressed form of the bcc solid, has a HOMO-LUMO gap of approximately 2 eV and a larger binding energy than that of the proposed C(36) solid.

Journal Article↗

PubMed2004

From a spin-off to the advantageous use in Diels-Alder reactions: a combined synthetic, spectroscopic and computational approach to N-(dienyl)acylamines.

The acid-catalyzed condensation of aldehydes and acetamide has been shown to provide a pool of diverse equilibrating species. For the first time, the synthesis of substituted 1-N-acylamino-1,3-butadienes has been accomplished directly in moderate yields upon telomerization of two molecules of aldehyde with one molecule of carboxamide. Detailed spectroscopic and computational investigations establish the favourable formation of all-trans aminodienes under the reaction conditions. Employment thereof as diene building blocks in Diels-Alder reactions allows for the synthesis of carbocyclic molecules with high stereocontrol.

Journal Article↗

PubMed2003

Neutral bishomoaromatic semibullvalenes.

Isolobal substitution of CH units by boron carbonyl groups (BCO) at C2,6 and C2,8,4,6 in semibullvalene favors the delocalized neutral bishomoaromatic systems substantially. The homoaromaticity is documented by the computed diatropic nucleus independent chemical shifts (NICS). In addition, BCO substitution can result in low-lying triplet and open-shell singlet states. In contrast, substitution at C1,5 more than doubles the related Cope rearrangement barrier. The C2,6 and C2,8,4,6 BCO-substituted barbaralanes, barbaralones, and bullvalenes have substantially reduced barriers.

Journal Article↗

PubMed2003

Bonding and electronic structure in consanguineous and conjugal iron and rhenium sp carbon chain complexes [MC4M'](n)+: computational analyses of the effect of the metal.

Density functional theory has been used to probe the bonding and electronic properties of the homo- and heterobimetallic sp carbon chain complexes (ML(m), = (eta(5)-C(5)R(5))(eta(2)-R(2)PCH(2)CH(2)PR(2))Fe, (eta(5)-C(5)R(5))(NO)(PR(3))Re; z = 0-4). All neutral complexes are best described by MCtbd1;CCtbd1;CM electronic structures, in accord with much experimental data. The singlet dications are best described by cumulenic (+)M=C=C=C=C=M(+) valence formulations. However, the diiron and rhenium/iron dications are found to possess triplet states of nearly identical energy, clarifying experimental magnetic data. Their electronic structures have dominant *(+)MCtbd1;CCtbd1;CM(+)* character, with some spin delocalization onto the carbon chain. The mixed valence monocation radicals exhibit delocalized unpaired electrons, in accord with class III (strongly coupled) and II (weakly coupled) assignments made from experimental data earlier, with some spin density on the carbon chain. An isolable diiron trication has a doublet ground state, but some computational data suggest a close-lying quartet. For the unknown diiron tetracation, a bis(carbyne) or (2+)Fetbd1;CCtbd1;CCtbd1;Fe(2+) electronic structure is predicted. Calculated adiabatic ionization potentials show the iron endgroup to be more electron-releasing than rhenium, in accord with electrochemical data. This polarizes the electronic structures of the rhenium/iron complexes. To help validate the computed model structures, crystal structures of ((eta(5)-C(5)Me(5))Fe(eta(2)-dppe))(2)(mu-C(4)) and [((eta(5)-C(5)Me(5))Fe(eta(2)-dippe))(2)(mu-C(4))](3+) 3PF(6)(-) are determined. Data are analyzed with respect to related diruthenium and dimanganese complexes.

Journal Article↗

PubMed2003

Unusual coupling reactions of aldehydes and alkynes: a novel preparation of substituted phthalic acid derivatives by automated synthesis.

Based upon a highly versatile multicomponent methodology, a new one-pot synthesis of substituted phthalic acid derivatives from alpha,beta-unsaturated aldehydes was developed. The reaction involves the intermediacy of an acetamidodiene species which undergoes Diels-Alder addition to diethyl acetylenedicarboxylate. The resultant acetamidocyclohexadiene is subject to elimination of acetamide under the reaction conditions to give rise to substituted diethyl phthalates in good yields. This domino condensation-cycloaddition-elimination sequence has been applied to a variety of alpha,beta-unsaturated aldehydes. Furthermore, we demonstrated the exploitation of parallelized and automated synthesis technology for the rapid screening of reaction conditions and compositions. Detailed studies revealed the catalytic role of the employed acetamide and the occurrence of a stereoselective 1,4-syn elimination pathway under standard conditions.

Journal Article↗

PubMed2003

Monocyclic boron carbonyls: novel aromatic compounds.

Monocyclic boron carbonyls, (BCO)nm, with 4n + 2 delocalized electrons are highly aromatic, as indicated by the computed nucleus independent chemical shift (NICS) and the computed energies for benzene analogue.

Journal Article↗

PubMed2003

Synthesis of a new chiral bisphospholane ligand for the Rh(I)-catalyzed enantioselective hydrogenation of isomeric beta-acylamido acrylates.

The highly stereoselective synthesis of a chiral silylphospholane has been described, which can be advantageously used as a building block under base-free conditions for the construction of diphosphines related to DuPHOS. The utility of silylphospholane is shown in the synthesis of a new bisphospholane ligand 1 (MalPHOS), which is characterized by a maleic anhydride backbone. The ligand forms with Rh(I) a complex with a larger bite angle P-Rh-P than the analogue Me-DuPHOS complex. Both complexes have been tested in the asymmetric hydrogenation of unsaturated alpha- and beta-amino acid precursors of pharmaceutical relevance. In several cases, the new catalyst was superior in comparison to the Me-DuPHOS complex, in particular when (Z)-configured beta-acylamido acrylates were used as substrates.

Journal Article↗